Used Heller Mch 250 for sale (56)

Condition: good (used), Year of construction: 2006, CNC machining center - horizontal Manufacturer: HELLER Machine model: MCH 250 Control: Siemens 840 D – Powerline Year of construction: 2006 TECHNICAL DATA - X-axis mm 800 - Y-axis mm 800 - Z-axis mm 800 Travel range along the center of the table, X-axis mm +400 to -400 Travel range vertically above the pallet clamping surface, Y-axis mm +120 to +920 Travel range transversely to the center of the table, Z-axis mm +150 to +950 Feed forces - X-axis at ED S3 – 40% N 15000 - Y-axis at ED S3 – 40% N 15000 - Z-axis at ED S3 – 40% N 17500 Speeds - Feed rate in X, Y and Z axes mm/min 1-50000 - Rapid traverse speed mm/min 50000 - Acceleration in X, Y and Z axes m/s² 4.0 - B-axis (360 x 1° rotary table) max. speed 1/min 25 Rotary table - Division degrees 360 x 1 - max. permissible clamping weight daN 800 - Max. tangential moment Nm 20000 - max. tipping moment Nm 18000 Spindle - Speed range 1/min 45 – 6000 - Tool holder DIN 69893 HSK 100 Form A - Motor Three-phase spindle motor Bsdpfx Ake Agvffjtslp - Drive power max. at the spindle at ED S1 - 100% kW 40 -- at ED S6 - 40% kW 60 -- at ED S6 - 25% kW 70 --- from speed 1/min 500 - Torque max. at the spindle at ED S1 - 100% Nm 765 -- at ED S6 - 40% Nm 1145 -- at ED S6 - 25% Nm 1340 -- up to speed 1/min 500 Tool magazine - Magazine type Rack - Magazine places incl. 2 x 7 setup positions 405 places - Magazine places for max. tool diameter 23 places Pallet changing device - Pallet size mm 630 x 630 - Workpiece dimensions: Swiveling diameter in the working area x height mm Ø900 x 1000 - Pallet changing accuracy in X, Y and Z axes mm 0.01 - Pallet changing time at 500 (800) daN s 12 (14) - Rotary storage RSP 4-fold - Pallets in the system, number 6 EQUIPMENT FEATURES + Coolant system ++ with vacuum rotary filter - high pressure 50 bar (Knoll VRF 250) ++ Coolant tank capacity l 1500 ++ Coolant pump 3 bar flow rate l/min 170 ++ Coolant pump 2 bar flow rate l/min 40 ++ High-pressure pump 70 bar flow rate l/min 22 + Chip removal ++ Conveyor spirals in the machine bed number 2 ++ Diameter mm 160 ++ Transverse chip conveyor ++ Conveyor speed m/min 1.5 ++ Discharge height mm 1200 + Rotary storage RSP 4-fold + Pallets in the system, number 6 + Integrated tool monitoring IPM + Drill breakage control + Measuring probe Renishaw + Status lamp 3 colors + Remote diagnostics via modem Machine weight daN 19000 Space requirement basic machine L x W x H approx. m 6.3 x 4.9 x 4.0 Power requirement basic machine kVA 85 Maximum power requirement (including all options) kVA 131 Subject to changes and errors in technical data and specifications.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49149, operating hours of spindle: 39,072 h, number of slots in tool magazine: 280, Equipment: chip conveyor, For sale is an extremely robust and reliable horizontal 4-axis machining center, Heller MCH 250, manufactured in 2008. The machine is designed for high-precision heavy-duty machining and is in operational condition. Equipment: - Horizontal spindle - 2-position pallet changer - Rotary table - Additional 4-position rotating pallet changer (Keppeler, SN: M4.4914900) - Siemens 840D control - 280-position tool changer - Chip conveyor Knoll 330S-1/150 - Coolant/lubricant treatment system with band filter, Siemens Simatic control - Cooling unit BKW Blods Afxw Hspfx Aktep Accessories: - Workbench (4 drawers, 1 door) - Swivel chair - Shelf - PC, mouse, keyboard, monitors Attractive offer – flexible and worry-free We offer not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together, we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: ready for operation (used), Year of construction: 2005, operating hours: 72,887 h, functionality: fully functional, machine/vehicle number: 32-47220, Equipment: chip conveyor, The Heller MCH 250 is a robust, horizontal 4-axis machining center from the German machine tool manufacturer Gebr. Heller Maschinenfabrik GmbH. This CNC machine is specifically designed for highly productive single-piece and series production and is frequently used for machining aluminum and steel castings. Equipment: -Horizontal spindle, 2-position pallet changer with rotary table No. 1116, chip conveyor, coolant/lubricant treatment system (manufacturer Knoll, year 2007), cooling unit, tool changer, 2nd control panel -without SL. Control: -Siemens 840D Accessories: -Telescopic drawer cabinet, storage shelf, clamping device, step stool (3 steps) Attractive offer – flexible & worry-free We offer not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. Bedpfx Akjz N Eykjtolp 📞 Please contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Blsdpfx Aouxdhuoktep

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Bodpfx Aksy Epfvetjlp • 4th axis rotary table, 1-degree indexing • Probe (workpiece/tool probing system) Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet Technical Specification Bedpsy H D T Uofx Aktelp Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Bsdpfozncnkjx Aktelp Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 800 mm Spindle speed: 12,500 rpm Number of axes: 4 Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 48014, Equipment: chip conveyor, For sale is a horizontal, high-performance machining center, HELLER MCH 280, in operational condition. This machine, manufactured in 2007, is specifically designed for high-precision series production and demanding heavy-duty machining. Thanks to its robust construction and powerful spindle, the center guarantees maximum stability and durability. Equipment: - Horizontal spindle - 2-position pallet changer with rotary table Bedpo Afwh Djfx Aktslp - Siemens 840D control system - BKW cooling unit - Knoll chip conveyor - Knoll coolant/lubricant treatment system, Siemens OP7 control - 2nd operating unit - Tool changer Accessories: - Table with mounted clamping device (Diebold) - Telescopic drawer cabinet Contents: Hand tools, machine accessories Attractive offer – flexible & hassle-free We offer not only a high-quality product but also customized financing options that can be tailored to your needs. Whether it's a down payment, installment payments, or individual financing models, we will work together to find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please feel free to contact us for more information or a non-binding offer. We will provide you with personal and expert advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2007, operating hours: 40,933 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 280 C Operating hours: 40.933h Year of construction: 2007 Control unit: Siemens 840D PL Bjdpfexwpmxex Aktslp Spindle: 8.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine / places (Options): Rack / 234 (Operating panel at the tool loading station with terminal) Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 100 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Additonal options: Receiver for measuring probe (RENISHAW); interface exhaust system; additional weight for pallets; drill fracture sensing; status lamp; interface exhaust system; integrated tool and collision monitoring; toolshaft cleaning; tool codechip; Interface handheld;

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C 5 axes Year of manufacture: 2006 Control: Siemens 840 D Spindle speed: 8000 rpm Travel paths X: 1000 mm Y: 1200 mm Z: 1100 mm Pallet size: 630 x 630 mm Rotary table: 360,000° x 0.001° Bljdpfx Asy Nybgsktop Tool magazine positions: 400 Interface: HSK 100

Condition: used, Year of construction: 2002, Technical details: x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 20 t dimensions of the machine ca.: 6,80 x 3,0 x 3,20 m Tool bore: HSK-A 100 Bledpfjw T Tntsx Aktep turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits Bljdpfx Aex D Skmsktsp • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm Bsdetqqk Nopfx Aktslp sawblade width 12 mm hole of sawblade 10 - 50 mm grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 total power requirement 0,33 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 52, number of axes: 4, This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details. • Automatic tool changer (ATC): 52 tools Additional equipment Bodoy Ef D Ejpfx Aktolp • Twin pallet changer Technical Specification Taper Size SK 50

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Bsdpfxszdpvgo Aktolp Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: used, Year of construction: 2006, operating hours: 48,659 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, Control unit: Siemens 840D PL Spindle: 7.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine & places: Rack 234 / Chain 50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1000 / 1000 Bodpfx Aoug T E Ajktslp Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options: Infrared receiver for measuring probe (BLUM); Interface for attachment heads; fast drill fracture sensing (SBBK); codechip tool; Runtime and quantity recording; intergrated prozess monitoring IPM; Screen blow-off device for operator door; alternative strategy; toolplaning with MCIS TDI;

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Blsdpfx Akjzncndetjp Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Tool positions: 400 Tool interface: HSK 100 Number of machining axes: 5 MACHINE DETAILS Control system: Siemens 840D

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER H5000 horizontal machining centre was manufactured in 2021. It features a working range of 800 mm in all axes and a maximum workpiece diameter of 900 mm. The machine includes a tool taper of HSK-A 100 and a tool magazine capacity of 100 slots. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 machine we have for sale. Contact us for further details. Bsdpfx Asz Ixt Hsktolp - Machine Count: 2 units- Control Unit: Siemens SINUMERIK 840D solution line with 24" Multitouch Main Control Panel and HELLER Operation Interface- Working Range (X/Y/Z Axes): 800 / 800 / 800 mm- Drive Package: POWER Package (Standard Drive in X/Y/Z)- Rapid Traverse (X/Y/Z Axes): 50 m/min- Acceleration (X/Y/Z Axes): 5 m/s²- Feed Force X- and Y-Axis (ED S3 -40%): 15,000 N- Feed Force Z-Axis (ED S3 -40%): 20,000 N- Feed Axis Servomotors: Incremental Encoders- Linear Axis Positioning Tolerance (Tp): 0.005 mm- Working Unit: PC 100 i Power Cutting Unit (10,000 rpm, 45 kW, 360 Nm)- Tool Taper: HSK-A 100 according to DIN 69 893- Tool Magazine: 100 Slots, Chain Type (HSK-A 100) with Comfort Operator Terminal at Tool Setup Station- Tool Breakage Control: Fast Drill Breakage Control- Collision Monitoring: Damage Minimization Monitoring System- NC Rotary Table (B-Axis): 360,000 x 0.001 deg Indexing, 25 rpm, 8 arcsec Accuracy, 12,000 Nm Max. Tangential Moment, 18,000 Nm Max. Tilting Moment- Plane Transformation: CYCLE 800- Workpiece Setup Station: Manually Rotatable 4 x 90 deg- Workpiece Clamping Interface: 5-way Media Interface, Hydraulic Pressure 200 bar Proportional Technology- Pallets: 2 Special Pallets in Basic Machine (HELLER Drawing AP.205705) with DIN Hole Pattern- Pallet Dimensions: 630 x 630 mm- Max. Workpiece Diameter: 900 mm- Max. Workpiece Height: 1,000 mm- Max. Clamping Load (Pallet 1): 1,000 kg (single-sided) / 1,400 kg (double-sided)- Pallet Change Time: 13 s (without hydraulic clamping) / 13.5 s (with hydraulic clamping)- Coolant & Chip Conveyor: Scraper Belt Conveyor for Wet Machining- Cooling Systems: Precision Water-Air Chiller Unit (Compressor) for Direct Drives of A- and B-Axes, Spindle, and Control Cabinet; Coolant Temperature Control Unit- Mist Extraction: Emulsion Extraction System- Electrical Connection: 3~ 400 V / 50 Hz, Nominal Current 65 A, Short Circuit Rating 9 kA- Total Connected Power: approx. 37 kVA (Machine) + approx. 14 kVA (VRF Coolant Unit)- Compressed Air Supply Pressure: 5 - 6 bar- Permissible Ambient Temperature: 10 - 45 °C- Material Processed: Aluminum (exclusively)- Operating Hours: approx. 12,000–15,000 hours (pending confirmation)- Operational Status: Currently installed/in place and powered onOptional Machine Equipment:- Special Mount: Multi-Spindle Heads (HELLER Drawing 00.882914 MAGNA)- Tool Measurement: RENISHAW Radio Touch Probe RMP 60 with Receiver & HELLER Measuring Cycles- Coolant Filtration Unit: Vacuum Rotary Filter KNOLL VRF 250 with 50 bar High-Pressure Internal Coolant Supply (IKZ), Working Area Flushing, 1,200 L Tank Capacity Technical Specification Taper Size HSK 100

Condition: ready for operation (used), Year of construction: 2023, operating hours: 8,900 h, functionality: fully functional, Heller HF5500 including Fastems FPT 1000 Heller HF5000 5-axis machining center Control: Siemens Sinumerik SL Spindle: HSK100 Tool magazine: 100 tools Bodpsw I Tupsfx Aktslp Fastems FPT1000 18 pallet stations Planning software (unmanned shift)

Condition: good (used), Year of construction: 2011, Ref. -No.: 10668 Manufacturer: HELLER Type: H6000 Year of construction: 2011 Type of control: CNC Control: Siemens 840D solution line Storage location: Halberstadt Country of origin: Germany X-Travel: 1.000 mm Y-Travel: 1.000 mm Z-Travel: 1.000 mm Tool Taper: HSK-A100 nach DIN 69893 Numbers Of Tools In Magazin: 50 Turning Speeds: 8.000 RPM Max. Workpiece height: 1200 mm Spindle Speed: 8000 RPM Max. Torque: 822 Nm Feed Speeds X/Y/Z Axis: 1-50.000 mm / min Rapid Traverse: 50.000 m / min Drive Capacity - Spindle Motor: 43 kW Blodpo Ahkywjfx Aktjp Internal cooling: 70 bar Rapid Traverse: 50000 mm / min nominal voltage: 400 V frequency: 50 Hz Speed range - main spindle: 8000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 × 630 mm pallet change time: 13 s Further information: Additional Equipment / Optional Features 5-port media interface for workpiece clamping (60 bar hydraulic pressure) Additional 630 × 630 mm pallet Fast drill breakage detection Comfort operator terminal at the tool setup station KNOLL paper band filtration system High-pressure coolant system (70 bar through-spindle coolant) Working area flushing system Air blow-off system for the operator door window Integrated tool monitoring system Collision monitoring system to minimize machine damage Handheld control unit including interface SK50 high-performance milling spindle Production Data Acquisition System (PDA/BDE) Workpiece clamping via media coupling, 60 bar Included Features SIEMENS 840D Solution Line CNC control SK50 high-performance milling spindle Dual pallet changer 70 bar through-spindle coolant system KNOLL filtration unit Tool breakage monitoring Collision monitoring Production data acquisition (PDA/BDE) Additional pallet Workpiece clamping via 60 bar media coupling The machine is currently in active production and can be inspected under power and in operation by prior arrangement.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Year of manufacture: 2012 Bedpfx Ajzpyg Tsktelp Control system: Siemens 840D SL Spindle: SC63, 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK 63 Tool magazine / positions (options): Chain / 54 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Hydraulic, 60 bar Additional options, special features: Infrared receiver for measuring probe (RENISHAW); SBBK; Pneumatic support control at the workpiece setup station; Status indicator light; Chip conveyor for wet machining;

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49063, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 69,700 h, For sale is a highly productive, horizontal 4-axis CNC machining center, type Heller H 4000, manufactured in 2008. This machine comes from a plant closure and is characterized by its exceptional stability, high precision, and maximum reliability in series and single-part production. It is fully functional and can be inspected while powered on, by arrangement. Equipment: - Horizontal spindle - Pallet changer with rotary table - Additional 4-position rotary table Keppler SN: M4.4906301 (each with a rotary table) - Chip conveyor Knoll 600K-1 - Fine chip removal system - Coolant/lubricant treatment with band filter Accessories: - Workbench (8 drawers) - Telescopic drawer cabinet - Storage shelf Contents: Hand tools, various analog and digital measuring instruments, machine accessories Attractive offer – flexible & worry-free Bljdpfxo Afva Ej Aktsp We offer you not only a high-quality product but also customized financing options that are tailored to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don’t have to worry about anything. 📞 Feel free to contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: Sinumerik ONE, _____ Description: Year of manuf. : 2024 Control : Siemens Sinumerik ONE Speed : 8000 rpm Movement X/Y/Z : 1000/1000/1000 mm Tool holder : HSK-A100 Spindle: Technology:Gearbox Spindle Speed:8.000 rpm Power (max.):60 kW Blodpfxsz N Rbgo Aktjp Torque (max.):1.146 Nm Taper:HSK-A100 NC-Roundtable: B-Axis:0,001° Palletsize:630 x 630 mm In general: Toolmagazine:425 stations Rapid travers in X/Y/Z:50 m/min Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbelt-filter and high-pressure, 70bar Workpiecemeasurement:Touchprobe, Renishaw RMP60 Toolbreakagecontrol:Taktil Softwareoption:Process-integrated tool monitoring Automation I:Palletchanger, 2 stations Automation II:Interface FASTEMS MLS Oilmistseparation:Interface mechanical prepared Further Accessory:Rinsing pistol

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Blsdpfsz E Hxljx Aktep Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Table load capacity: max. 1000 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,012 h, functionality: fully functional, machine/vehicle number: 31-46644, The HELLER MCi 16.2 is a high-precision, CNC-controlled horizontal machining center from the German manufacturer HELLER. The machine is designed for productive and flexible series production (e.g., in mechanical engineering or the automotive sector). Equipment: -Horizontal spindle, pallet changer with rotary table, additional 4-position pallet changer (manufacturer RILE RSP-MC+16.2, year 2004, serial number: 0421635093) -2nd operator terminal, chain-type tool changer with approximately 80 positions, chip conveyor (manufacturer Knoll 600K, coolant/lubricant treatment with band filter, control cabinet, separate cooling unit (manufacturer BKW) Control: -Siemens 840D Blodpfjz N Ewiox Aktjp Accessories: -Telescopic drawer cabinet (8 drawers) with attached work surface, workbench (1-door) with partition, lighting fixture Contents: various machine accessories Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors!