Used Es 1800/350Hl for sale (8,888)

Condition: ready for operation (used), Fagor MOCA-725 Vers. 09A Length scale with MC-A reading head Vers. 30A SN: 118001318050738 - total length: 82,5cm,used, good condition, 100% working, scope of delivery according to photos Dcodpfxet Nbzfe Abzjh

Condition: ready for operation (used), Fagor MOCA-1145 length scale with MC-A reading head SN: 118001319060894 - total length: 125cm, used, minor signs of wear, 100% functional, scope of delivery as per photos Dcedet Iy Uzjpfx Abzeh

Condition: ready for operation (used), Heidenhain ROD 700 18000 angle encoder Id. 203 741 61 SN:3514502H professionally fully overhauled and tested, with 6 months warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dcodpfex Dwxpox Abzsh

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Dedpswx Dctsfx Abzoch Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: used, maximum load weight: 11,960 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2018, loading space length: 7,560 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 47 m³, Equipment: ABS, Schuh ASZ 18007 Refrigerated Box Bi-Temp. Thermo King 48m³ Pass-Through System Tandem Internal number for inquiries: 0525439 * Body manufacturer: Schuh * Type: ASZ 18007 * Own weight: 6,040 kg * Refrigerated box * Bi-temperature * Thermo King * Pass-through system * ABS * EBS * 2 axles air suspended Dedswqaglepfx Abzoch * Aluminum underride protection * Pass-through equipment * Interior lighting * Lashing rail left / right * Rear view camera pre-installation Dimensions (cargo area/loading area) Cargo length: 7,560 mm Cargo width: 2,480 mm Cargo height: 2,500 mm Tires: * Front axle: 385 / 65 R 22.5 air suspended / 35% * Rear axle: 385 / 65 R 22.5 air suspended / 35% ---- Price: 13,900 Euro + 19% VAT For further questions you can reach us at the following numbers: We speak: German, English, French and ????? Subject to errors, mistakes, and prior sale.

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Dcsdpsw U H Sbofx Abzeh Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, maximum load weight: 32,610 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete selection of vehicles with immediately and short-term available units on our website. Sample from the equipment list. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads. Coupling Device: * 2-inch king pin Underrun Protection: Dcsdowyhy Espfx Abzeh * Bolted version, compliant with EC regulations Side Impact Protection: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right hand side (FR) Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake System: * Dual-line compressed air brake system compliant with EC regulations, equipped with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Foolproof coupling heads permanently mounted on front crossmember, without connection line to tractor unit * Brand: Wabco Tyres: * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 piece double basket with mounting hardware for one spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * Drill holes for tie-down straps approximately every 500 mm on the outer frame Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set in outer frame Lighting System: * EC compliant, 24 Volt, with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin plug connectors on front crossmember Paintwork: * Chassis and front wall sand-blasted, primed and painted in single color * Chassis: RAL 3002 carmine red * SSV: aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Wheels: silver Including Special Accessories: * First axle liftable with fully automatic, load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets crosswise to loading area * 20 stakes made of galvanized pipe 80/50, total length approx. 1,000 mm * Storage magazine for 20 plug-in stakes on inner front wall * Twistlocks for 1 x 40’ and 2 x 20’ containers, flush-mounted at the rear * Twistlocks for 1 x 20’ container in middle position * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211 Dodpfx Aeukn S Hjbzsch

Condition: excellent (used), Year of construction: 2014, clamping force: 7,000 kN, Equipment: documentation/manual, Clamping force: 700 t Screw diameter: 55 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 710 cm3 Type: Horizontal Drive: Hydraulic Dcsdpfx Ajzblkiobzoh Core pullers 2 + 2 \+ Robot Viper 40

Condition: excellent (used), Year of construction: 2014, 🔧 *M001 — ENGEL DUO 1800 / 700* (2014) 📐 *CLAMPING UNIT* • Clamping force: 700 T • Coining: NO • Max mold weight: x kg • Max mold weight per plate: 7300 kg • Size between bars (WxH): 1100x960 mm • Min mold height: 450 mm • Max mold height: 950 mm • Max stroke open: 1850 mm • Centering ring FIX / MOVE: 160 / 160 mm • Fast clamping system: NO Dsdpfozbdbtjx Abzsch 🔌 *MOLD INTERFACE* • Heating zones: 16 (16 pin TC, 16 pin PW) • Water cooling circuits: 8+8 • Hydraulic circuits (cores): 2+2 • Hot runner sliders hydraulic (nozzles): 8 • Hot runner sliders pneumatic: 4 💉 *INJECTION UNIT* • Screw diameter: 60 mm • Nozzle face + thread: R20+UNF 7/8" • Injection unit type: 1800 • Screw stroke: 270 mm • Max injection capacity: 763.41 cm³ • Max injection pressure: 2360 Bar • Max injection rate: 710 cm³/s • Accumulator SW / HW: YES / YES ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: YES • Sockets 400V/16A: 4 • Sockets 400V/32A: 7 • Sockets 400V/63A: 1 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 4 • Air pressure ports: 6 • User inputs / outputs: 18 / 8

Condition: used, Year of construction: 2001, functionality: fully functional, MAPPI AU 1F 1S 900 1800 O.4 R.S.A. - Year 2001 Tempering furnace Working dimensions: 900x2000 mm Glass thickness: 4-19 mm Overall dimensions: Length: 10.50 m Width: 2.40 m Dcsdpezbrpxjfx Abzeh Height: 2.40 m + Fan (2.40x2.30x2.40 m) Power: 107 kW

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 74800 € 1413.72 € 40 to 2050 mm Y1 / Y2 / X und R Achse 200 mm 1700 mm 350 mm 440 mm servomotorischer Spindela 180 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 2600 mm 1450 mm 2650 mm 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool Dcjdpfxeynm A Hj Abzsh

Condition: used, Year of construction: 2006, Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab Model: Octopus 1800 BFTS Machine Type: Automatic ring pallet wrapper Year of Manufacture: 2006 Application: Stretch wrapping of palletized goods Wrapping System: Horizontal ring wrapping system Product Transport: Integrated motorized roller conveyor Electrical Supply: 3 x 400 V Operating Current: 20 A Control Interface: Siemens SIMATIC Panel Conveyor System: Roller conveyor through wrapping area Construction: Heavy-duty steel gantry frame with yellow ring wrapping assembly Location in Line: Palletizing / end-of-line packaging area Condition: Used, installed in industrial production environment Dsdpfxezb Azfs Abzech

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Dodpfx Aexgfbqobzoch

Year of construction: 2018, operating hours: 4,163 h, condition: used, functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 31,500 kg, hopper volume: 7,000 l, machine/vehicle number: PID000123KDGI16212, Belt feeder for stockpiles 2-deck heavy-duty screening machine Engine: Cat-C4.4 Dual power system Hopper extension Telescoping side conveyors Transport dimensions: 15,380 x 2,860 x 3,390 mm (L x W x H) Dcedezbri Ejpfx Abzeh

Condition: used, Milling spindle Manufacturer: HSD Type: ES 779L 4P 12.00 kW H1 HSD 12 kW milling spindle with tool changer and 6-position station for Kuka Quantec series Consisting of: 1 piece Water-cooled milling spindle with HSD ES779L 4P 12.00 kW H1 tool changer, liquid cooling 1 piece Tool station for 6 tools (tool changer station) with Leonie measuring station for checking the tools 1 piece Kuka Tech cabinet with KEB frequency inverter, control technology, and water cooler, art. no. 00216249, serial no. 0395009, year of manufacture 2018 Weight 360 kg 1 piece Hose package and connection cable from the control cabinet to the HSD spindle. Originally intended for a Kuka robot from the Quantec series; Dsdpfx Aewyay Dobzech all mounting brackets and connections are included. 3626ä

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0 permanent magnet three-phase servo motor, SN:35588 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,The agreed sales discounts do not apply to this item. Price please ask separately! Dcodpji D Ig Ejfx Abzsh

Condition: new, Year of construction: 2026, total length: 2,480 mm, Scissor platform Magni ES 1208AC+ Dcjdpfx Abeza H R Iezsh Drive Electric Year built 2026 Work height (mm) 12,000

Condition: used, Year of construction: 2005, Technical details: screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN Dcsdpowftr Defx Abzoh weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! *

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 357 h, load capacity: 230 kg, lifting height: 7,800 mm, platform length: 1,870 mm, platform width: 800 mm, empty load weight: 1,485 kg, We are selling a scissor lift Jlg 1930 ES, Tested good batteries, one year old, Working height - 7.80 m Lifting capacity - 230 kg Weight 1485 kg Operates on batteries 220V charging Control from the platform Djdpfx Aovyqc Robzech The lift has been tested and serviced Netto price 3800 EUR

Condition: ready for operation (used), Year of construction: 2012, number of axes: 6, This 6-axis PANASONIC TA-1800 robot welding cell was manufactured in 2012. It features a maximum reach of 1796 mm, providing flexibility for various welding applications. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800 robot welding cell we have for sale. Contact us for further details. • Robot max distance 1796mm • Robot min distance 472mm Dcsdpfx Aszatidsbzeh

Condition: used, Year of construction: 1992, Technical details: volume capacity: 1,95 m³/min feed pressure: 10 bar Number of working hours: 9166 h total power requirement: 15 kw weight of the machine approx.: 360 kg space requirements of the machine approx.: L:1,54xB:1,3xH:1,2 m compact construction with integrated filter techn. details - max. operational pressure of the tank 11,5bar - operation voltage 380V - filter make Balwin type BT 364 slightly damaged covering, besides that top used condition We don't sell spare parts nor have spare parts available! Dcodpfx Abju Nzypozjh *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Dcsdpfxeu N D Szs Abzsh Rotary table conventional *

Condition: used, Technical details: weight of the machine ca.: 4,0 t Dedpfx Aju N D S Uobzsch machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V Dcedpfx Aou N Ebdjbzsh total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *