Used Eurometal Fus 50 for sale (35,065)

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) Ibjdpfxoz Iylds Agyjc • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: refurbished (used), Year of construction: 2024, machine/vehicle number: R-00723, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2024.03. The robot comes with an R-30iB Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2024.03 Warranty term (months): 12   Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Ibsdpfx Agoz R S Dtsysc Weight (kg): 560   Controller: R-30iB Plus Year of Manufacture Cabinet: 2024.03 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Ijdpfx Asz Rk N Tsgyjbc Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), Year of construction: 1970, pulling force - max. 2 t max. ram stroke 400 mm max. workpiece diameter 1000 mm workpiece weight 10 t clamping table 900 x 680 mm total power requirement 5,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,3 x 1,2 x 1,5 m Iedpfxez Ic A Es Agyebc

Condition: good (used), Technical data for the clamping foot: Manufacturer: META Type: META CLIP The scope of delivery includes: 04x clamping foot, used suitable: for upright profile 50 x 30 mm Material color: sendzimir galvanized Total width: approx. 75 mm Total depth: approx. 57 mm Material thickness: approx. 2 mm Weight | pc. approx. 0.060 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation Iedpfernqmisx Agysbc or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 515054005126, Year of construction: 2005, load capacity: 1,500 kg, lifting height: 4,350 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 1,960 mm, gearing type: automatic, battery voltage: 24 V, overall weight: 3,140 kg, empty load weight: 2,340 kg, color: orange, Equipment: 3rd hydraulic function, lighting, pallet forks, sideshift, trailer coupling, We would be happy to prepare a financing lease offer for you. The device is in perfect technical and optical condition. Battery acid density is within the acceptable range. Includes charger. Ibedpez Rn Utofx Agysc Includes Aquamatik water filling tank. We can also carry out a new safety inspection, service, etc. Transportation can be arranged smoothly throughout Europe. No liability for errors.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: GE-50RAY, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 254 kg, warranty duration: 36 months, height adjustment type: electric, door opening width: 530 mm, door opening height: 300 mm, table length: 203 mm, table width: 430 mm, laser wavelength: 1,064 nm, input frequency: 100 Hz, Equipment: cabin, Seize the opportunity and secure the 50 watt, 100 watt or 200 watt fiber laser! We will be happy to provide you with further information or an individual offer. Contact us today and find out more about the benefits of these outstanding products. We offer brand new fiber lasers with German user software and operating instructions. These devices are very easy to operate without any programming knowledge and are ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details (depending on model): Laser power: 50 watts, 100 watts or 200 watts Wavelength: 1064 nm Frequency range: 20-100 Hz Marking field size: 150x150 mm (options: 50, 70, 110 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: Simple preview Laser class: 1 Working temperature range: 14-30 ℃ Focusing: Electric lifting column with motor control Max. Component height: approx. 300 mm Connection: 230V Cooling: Air-cooled Weight: approx. 170 kg (depending on model) Operating costs: Low Service life: Over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 150x150 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Foot pedal Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. Our fiber lasers are ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Ibodsu Tkclopfx Agyec Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions. Additional options: 100 watt and 200 watt models are also available on request - ideal for larger projects or higher power and speed requirements!

Condition: excellent (used), Year of construction: 2007, operating hours: 38,500 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/50 TECH Ibjdpoz Nxilsfx Agysc Baujahr: 2007 Schließkraft: 50 Tonnen Holmabstand: HOLMLOS Schnecken DN: 30 mm Spritzteilgewicht 70 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug hydraulisch

Condition: excellent (used), Catalog number: 8124 TECHNICAL DATA - Shaft width: 510mm - 4-knife shaft - Max. thickness of workpiece on thicknesser: 200mm - Max. thickness of workpiece on side heads (3-sided): 100mm - Top: - Pawls - Toothed infeed shaft - Pressure roller - Planing shaft - Smooth outfeed shaft - Bottom: - Guide strip - Adjustable rollers in the lower table, 2 pcs - Rear: - Side spindles + pressure roller, 2 pcs - Spindle height: 100mm - Spindle diameter: 30mm - Adjustable spindles (left/right) - Side spindle motors: 2 x approx. 1.5kW - Main motor: 7.5kW - 2 types of feed speed - Dust extraction port: 2 x 100mm, 1 x 120mm - Overall dimensions (L/W/H): 1700x1300x1160mm - Weight: 1103kg ADVANTAGES - Polish-made - Shaft with 4 knives - Used planer, very good condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.30 EUR Ibedpfx Aoz Rpkcjgyoc (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2012, operating hours: 4,000 h, Equipment: all wheel drive, Mini excavator New Holland E 50 B SR. * Operating weight: 4,945 kg * Air conditioning Ibjdpfxeup R Uuj Agyec * Year of manufacture: 2012 * Hours: 4,000 * Machine is in very good condition * Immediately ready for use

Condition: new, *IMMEDIATELY AVAILABLE* Includes: badge_20ftcontainer Equipment: - V-drawbar - for 20FT container - Twistlock receptacles Net price: €5,201.68 / Gross price: €6,190.00 Article number: VC2335602400.01 Technical data: • Brand: Vlemmix • Model: 20 FT • Vehicle type: Container trailer • Vehicle condition: New vehicle • Initial registration: no initial registration Iedpjzy A H Djfx Agyjbc • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 600 x 244 x 68 cm • External dimensions (LxWxH): 750 x 255 x 68 cm • Loading height of the floor: 68 cm • Permissible total weight: 3,500 kg • Unladen weight: 600 kg • Payload: 2,900 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: No DESCRIPTION • 4x Twistlock receptacles for containers • Plastic mudguards • The overall width over the mudguards is 255 cm • Very stable steel frame, welded • Loading platform height only approx. 68 cm • Maintenance-free rubber spring axles from KNOTT • KNOTT overrun device and parking brake • Reversing aid • V-drawbar • Galvanized chassis • Torsionally rigid longitudinal frame for safe driving characteristics • Lighting recessed in the rear frame • Side marker lights at the front • Automatic support wheel with holder in the center • 13-pole plug • Reversing lights • Integrated rear fog lamp • Chassis only: Container not included in the price _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any desired additions! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t chamfer lenght: 2550 mm distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm Ibodpfx Agju Ib D Eeyjc The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *

Condition: excellent (used), This conveyor belt machine is ideal for trimming the edges of small carpet samples. K-50 Diagram The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with an adjustable angle from 0° to 60°. The cutting depth is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. Iodpfx Aez Savgegyjbc The speed of the cutting motor and the conveyor belt is adjusted steplessly using frequency inverters. Larger pieces of carpet are guided manually as they pass through. Cutting width is 50 mm.

Condition: used, Year of construction: 2001, 7-Axis Turning and Milling Center Manufacturer: OKUMA Type: MacTurn 50 Year of manufacture: 2001 Control: OSP-U100L Ibodoz D I Ifepfx Agysc Spiral-circular interpolation Upper Turret HS ATC: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm C = 360/0.001 B = 360/1 indexed Turning diameter max.: 610 mm Turning length Z1 min.: 1,500 mm Swinging diameter: 610 mm Turning diameter over cross slide: 580 mm Center distance approx.: 2,000 mm Tool holders: BT50 Driven tool holders BT50 = 40 - 3000 rpm Magazine ATC 72 BT50 For turning: ≈ 36 Driven tool holders: ≈ 36 Lower Turret V8: X2 = 200 mm Z2 = 1,045 mm Turning diameter max.: 380 mm Turning length Z2 = 1,045 mm Swinging diameter = 380 mm Tool holders: VDI40 Turret: 8 positions VDI40 Spindle: Speed range: 14 - 2800 rpm at 37 kW Chuck: D400mm Spindle bore: 110 mm Spindle nose: A2-11 Torque approx.: 2,000 Nm Coolant system with 40 bar pressure New screen New panel Several BT50 tool holders Weight approx.: 20 tons Space requirement L/W/H: 8,000 x 3,500 x 3,500 mm 121026ä

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 7,153 h, load capacity: 5,000 kg, lifting height: 5,080 mm, fuel type: diesel, mast type: triplex, power: 55 kW (74.78 HP), gearing type: automatic, total height: 2,470 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, cabin, lighting, sideshift, trailer coupling, Diesel forklift STILL RX70-50 Year of manufacture: 2016 According to the hour meter: 7,153 hours 5-ton lifting capacity 2.47-meter overall height 5.08-meter lifting height 55 kW Deutz engine - Triplex free-lift mast - Side shifter - Fork adjustment Iodpfx Agjz Hmrusyjbc - Full cabin with heater - Lighting system - Ready for immediate use - Original paint Selling price: €12,900 net Affordable delivery also possible!

Condition: used, Year of construction: 2022,

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine The device is in perfect condition, ready to work. Ibjdpjz N Shusfx Agyoc Technical data: 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Power supply 230V Frontal and side margins Push-button operation. The device punches holes and crimps the eyelet in one pass. Automatic eyelet feeding.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Modular 50S The Minipack Modular 50S is a compact, well-proven semi-automatic packaging machine with L-shaped sealing for producing shrink wrap packaging. The machine is universally applicable and easy to operate. – Semi-automatic packaging machine with L-shaped sealing – Electronically controlled sealing system – Manual or automatic operation mode – Simple and intuitive operation – Output up to 900 units per hour – Usable sealing bar dimensions: 540 × 400 mm – Max. film roll width: 600 mm Ibodpfx Agjx Tr Tcjyoc – Max. film roll diameter: 250 mm – Working table height: 930 mm – Machine dimensions (closed): 1,565 × 750 × 1,100 mm – Machine dimensions (open): 1,565 × 750 × 1,400 mm – Machine weight: 151 kg (net) – Machine on wheels

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, The Minipack Tunnel 50 Twin is designed for high packaging speeds with small products. Its dual heating chamber with separate controls ensures consistent shrink performance. Like all Minipack shrink tunnels, it is well insulated, energy efficient, and operates quietly. – Dual-chamber shrink tunnel – Independent control of heating chambers Iodpfx Ajyank Asgysbc – High throughput and shrinking speed – Power supply: 400 V, 3-phase – Installed power: up to 15.0 kW – Maximum product dimensions: 400 × 190 mm (length variable) – Tunnel inlet: 450 × 210 mm – Machine dimensions: 2,130 × 800 × 1,460 mm – Machine weight (net/gross): 260 / 318 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: GE-50RAY, shaft length: 1,064 mm, workpiece weight (max.): 20 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 125 kg, warranty duration: 24 months, height adjustment type: electric, laser wavelength: 1,064 nm, Equipment: cabin, 50-Watt Fiber Laser with a 3-Year Warranty Your Advantages at a Glance ✅ New ✅ 3-Year Warranty ✅ German-language application software and operating manual ✅ Ready for immediate use – no programming knowledge required ✅ Service, support, and spare parts directly from Germany ✅ On-site or remote training Ibsdpfx Aszcrbqegyjc Our Services Personal delivery and installation Setup and training on-site or via remote connection Ongoing technical support Fast service and spare parts supply from Germany Technical Data (model-dependent) Laser power: 50 watts Wavelength: 1064 nm Frequency range: 20–100 Hz Marking field: 150 x 150 mm (optional 50, 70, or 110 mm) Repeatability: ± 0.003 mm Engraving speed: up to 7000 mm/s Marking software: EZCAD German / English Pilot laser for preview Laser Class 1 Electric lifting column with motor control Max. component height: approx. 300 mm Connection: 230 V Air-cooled system Weight: approx. 170 kg Service life: over 100,000 operating hours Low maintenance and energy-efficient Included Laser head 150 x 150 mm CE declaration of conformity 3-year warranty German software Training and instruction Invoice with VAT shown Scope of delivery USB cable Power cable Stops USB stick with parameters German operating manual Foot pedal Laser safety glasses Application areas Ideal for: Texts and serial numbers Logos and graphics QR codes and DataMatrix codes Variable datasets Image engravings Metal engravings and commemorative inscriptions Plastics and coated materials Software EZCAD 2.14.0 (German) Supported file formats: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Shipping & Installation If shipped, we configure the machine via remote connection and provide training. Alternatively, we offer personal delivery, on-site installation, and training for your employees. Shipping costs will be agreed upon individually based on the postal code. Consultation We will gladly prepare an individual offer for you. Contact us today and learn more about the advantages of our fiber lasers. Also available as 100-watt and 200-watt versions! Secure this demonstration unit now before the new stock arrives.

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 870 mm, fuel type: electric, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, empty load weight: 10,694 kg, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, Four-way side loader Load center: 800 Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 660/250-480 Ibedpfxsz Evtfe Agysc Rear tire type: Solid tires Rear tire size: 413/178-285.8 Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Lease-purchase and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts starting from 8 tons. We would also be happy to offer your vehicle for consignment sale at our facility. Fork positioner, Platform height: 530 mm

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Storage location: Nattheim Ibedpfxezb N T Uo Agyec

Condition: used, Footprint: approx. 6000 x 7000 x 6850 mm Includes broach(es); not all are present. Rated force: 25 tons Peak force: 37 tons Stroke: 66" / approx. 1,676 mm Cutting speed: 0–33 ft/min Return speed: 0–60 ft/min Equipment: retraction unit Ijdpfozz Hl Tex Agyebc Table: sliding table, 3 stations

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,178 h, load capacity: 5,000 kg, lifting height: 4,260 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,880 mm, fork carriage width: 1,260 mm, fork length: 1,350 mm, empty load weight: 7,390 kg, total length: 4,200 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Load center: 650 Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: normal Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Ibjdez Ev A Tjpfx Agyoc Rear tire size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Leasing and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this J/SNHP 50/13/42V. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction of forklifts from 8 tonnes and up. We can also display your vehicle for consignment sale at our facility. Fork positioner, Fork positioner opening range: 380 / 1245 mm Heater, full cab, full free lift, Platform height: 880 mm

Condition: used, Manufacturer: Heraeus Model: NTU 100/50 Ibedez I Rbijpfx Agyjc Max. temperature: 250°C Internal dimensions: 1000 x 1500 x 1000 mm Weight: 690 kg