Used Fischer Milk Pasteuriser 5000 Litres/Hour De Areator for sale (32,996)

Condition: used, functionality: fully functional, total length: 14,580 mm, total width: 3,070 mm, load capacity: 5,000 kg, Specifications Condition: Used Drive: Electric Description: Single girder overhead crane 5000kg 14580mm Brand: Demag Total length: 14580mm Lifting height: 8m Capacity: 5000kg -Dimensions Span length (c/c) 14390mm H.O.H Wheel assembly width incl. bumper 3070mm Wheel spacing 2490mm Hsdswx Igcepfx Agujn Installation height 450mm -All 3 functions – hoisting/trolley travel/crane travel – have 2 speeds -This crane is available immediately and is in good condition. Last inspected in 11-24 -We can deliver and, if desired, install the crane onsite at extra cost.

Year of construction: 2020, condition: used, FISCHER – Cantilever racking for installation in enclosed spaces. The racking must not be clad on-site without consulting FISCHER. Design according to the specifications. Racking No. 1 - single-sided (cantilever arms bolted on). Number of racks: The following information refers to 1 rack. 1 unit Number of uprights: 3 units Racking length (center-to-center distance): 2,500 mm Distance between uprights: 2 x 1,250 mm Upright height (hole pitch 100 mm): approx. 2,500 mm Top storage level: 2,200 mm Foot length: 1st side/2nd side 2,000 / 0 mm Cantilever arm lengths (total length incl. end stop): 2,000 mm Cantilever arms: 1st side/2nd side 4 / 0 units Desired load capacity per cantilever arm: 500 kg Load capacity per upright side (without considering the foot): 2,000 kg Max. floor pressure: 0.11 kN/cm2 Shipping weight per rack: 607 kg Hedpfx Aozab Rcogujn Color of uprights: fire red, similar to RAL 3000 Color of cantilever arms: fire red, similar to RAL 3000 1 spray can The profile thickness applies to 100% utilization of the rack load capacity. Seismic zone could not be determined. A verifiable or tested static analysis is available for an additional charge. Text for the static calculation: Important note regarding the static calculation of the storage system: The static calculations take into account the fundamentals according to Eurocode (DIN EN 1991-1-1, DIN EN 1991-3 and DIN EN 1991-1-4) and the framework conditions of the respective national annexes (NA) applicable in the countries where the system will be installed. Since storage systems are usually installed in urban or industrial areas, the requirements applicable to these areas (e.g., for Germany, ground category III and IV) are included in the calculation. Important note regarding building permits, please note: Storage systems may require a permit according to the respective state building code. In the event of an order placed with Fischer, the client undertakes to obtain the necessary public-law permits for the storage system. If the permit is not granted, or the granted permit is revoked or withdrawn, the contractor shall not be liable for this. In the event of installation by Fischer, we generally assume that a valid building permit is in place at the time of installation. Any necessary verifiable static calculations for the building application can be obtained for a fee; please contact us. Cantilever racking: 1 unit 1,500.00 Foot rounding as a safety element: 3 units 13.50 per foot and side Storage location: Customer

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,700 h, load capacity: 5,000 kg, lifting height: 8,300 mm, free lift: 2,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,800 mm, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16x7x10 1/2, rear tire type: superelastic tires (black), rear tire size: 27/10-12, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, seat heater, 🔍 Looking for a reliable forklift? We are industry specialists! 💼🚜 We specialize in selling high-quality forklifts, offering thoroughly inspected machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your company! 📦 This listing features: COMBILIFT C5000E – TRIPLEX 8300mm – Year 2013 – 🔌 ELECTRIC – FULL FREE LIFT – FORK SIDESHIFT – WIDE POSITIONER – ✅ CONDITION 5/5 🔧 The forklift is in excellent technical condition, ready for immediate use. 📊 Key Features and Technical Specifications: 🆔 Model: COMBILIFT C5000E 📅 Year of Manufacture: 06/2013 🏋️ Lifting Capacity: 5000 kg 🏗️ Mast Type: Triplex 📏 Lifting Height: 8300 mm 🔌 Drive Type: Electric ⚙️ Load Center: 600 mm ⚖️ Total Weight: 7500 kg ⬆️ Free Lift Height: 2500 mm 🛞 Tyres: Solid, superelastic, good condition 🔘 Front Tyres: 16x7x10 1/2 – 100% TREAD 🔘 Rear Tyre: 27/10-12 – 100% TREAD 📐 Collapsed Mast Height: 3800 mm 🔍 Technical Condition: Fully functional, after service check 👀 Visual Condition: Very good 🔩 Fork Length: 1200 mm 📏 Overall Height: 2600 mm 📏 Overall Length: 2500 mm 📏 Overall Width: 2600 mm 📏 Positioner Width: 3100 mm 📞 Contact us today and let's move your business forward! 🚛📦 Hedpoy Uyvhsfx Agujn

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,453 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,350 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X50-15, overall weight: 12,450 kg, empty load weight: 7,450 kg, total height: 2,550 mm, total length: 2,700 mm, total width: 2,500 mm, color: green, motor model: V2403-T, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 Hjdpfoy Ux Ucex Aguen Years of Experience | In-house Service & Paint Shop 🎨 | Professional Advice 🧠 | Own Transport 🚛 | After-sales Support 🤝 Looking for a forklift you can truly rely on? We are a renowned dealer of new and used forklifts with a long-standing tradition. We serve clients all over Europe – from small businesses to large industrial operations. Our forklifts are more than just machines – they’re your guarantee of smooth and reliable logistics. ⭐ What Sets Us Apart? ✅ Every forklift undergoes a comprehensive technical overhaul (inspection, testing, oil & filter replacement, reconditioning of key components) ✅ UDT certification can be arranged upon customer request ✅ In-house paint shop and service workshop – machinery perfected both technically and visually ✅ Europe-wide transport using our own fleet and trained drivers ✅ Operator instruction on delivery + on-site performance test ✅ Post-sale service and technical support – we’re here for you after the purchase too ✅ Come and see or test our machines at our site – you’re always welcome! ✅ Hundreds of satisfied clients across Europe – join those who trust us ✅ Help with financing – we work with leading leasing companies ✅ Invoice in EUR or PLN – you choose 📦 AVAILABLE NOW: COMBILIFT C5000XL – Multi-Directional Forklift 🔹 Year: 2018 🔹 Operating hours: 6,453 h 🔹 Power: Diesel 🔹 Lifting capacity: 5,000 kg 🔹 Mast: Duplex – 4,000 mm 🔹 Wide fork positioner: 3,550 mm | Forks: 1,300 mm 🔹 Superelastic tires – 100% condition 🔹 Technical condition: Excellent – after full service 🔹 Visual condition: Clean, corrosion-free, ready for work 📏 Dimensions: • Lowered height: 2,550 mm • Total length: 2,500 mm • Width: 2,700 mm • Positioner width: 3,550 mm • Structure height: 3,000 mm 🏭 Ideal For: ✔️ Warehouses with narrow aisles ✔️ Wood, steel, and pipe industries ✔️ Handling long or oversized loads ✔️ Indoor and outdoor operations

Condition: excellent (used), Fischer FISCHERSCOPE X-RAY XDL 240 Professional X-ray fluorescence measuring device / XRF analysis system Manufacturer: Helmut Fischer GmbH Type: FISCHERSCOPE X-RAY XDL 240 For sale is a professional Fischer X-ray fluorescence measuring system for coating thickness measurement, material analysis, material testing, and quality control. The device comes from commercial use and is offered including PC system, monitor, software, documentation, calibration standards, accessories, and tools, as shown in the pictures. Manufacturer: Helmut Fischer GmbH Made in Germany Type: XDL 240 Serial number: SN150004753 Supply voltage: 115 V Frequency: 50 - 60 Hz Power consumption: 120 W Fully shielded device according to RöV §8 Annex 2 No. 3 Approval number: BfS 11/07 V RöV Fischer WinFTM software available WinFTM XDL 240 Version 6.33 L-PDM PC system with HP computer, monitor, keyboard, and mouse. Original Fischer documentation, certificates, data storage media, USB dongle / license stick and other accessories available. EC Declaration of Conformity available. Certificate for the Full-Protection Instrument available. Calibration and reference standards and other measuring accessories as shown in the pictures are included. Suitable for coating thickness measurement, material analysis, quality control, laboratory applications, and industrial measurement technology. Used measuring system from industrial application. Optical condition, see pictures. The system starts up, software and user interface are visible. No further technical inspection or calibration has been carried out by us. Inspection and testing on site is possible and desired after prior arrangement. Important note: "The table shown in the photos is not part of the sale." Dimensions and weight: Dimensions: 57.0 x 76.0 x 65.0 cm Internal dimensions: 46.0 x 49.5 cm (maximum sample height depending on configuration) Power supply: Voltage: 100 - 240 V~ (AC) Frequency: 50 - 60 Hz Hedpfxoy Ulalo Aguon Power consumption: 180 VA (Volt-Ampere) Weight: 120 kg Scope of delivery: FISCHERSCOPE X-RAY XDL 240 HP PC system Monitor Keyboard and mouse Software / data storage media USB dongle Calibration standards Tools Documentation and accessories as shown in the pictures Sale exclusively to commercial businesses. Sale is used, without guarantee, warranty, or return. All information provided to the best of our knowledge according to nameplates, documentation, and clearly identifiable data. Scope of delivery and condition, see pictures. We will be happy to answer any further questions by telephone or message.

Condition: used, Year of construction: 1974, length 450 mm width 250 mm height 1.250 mm accuracy +/- 1 ° distance between tapping holes H: 130 mm distance between tapping holes V: 150 mm distance between tapping holes H: 70 mm Hedpfoydqnxox Agusn distance between tapping holes V: 200 mm JOHANN FISCHER - Measuring Angle

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens Hedpfjhbal Dsx Agusn - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,453 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,350 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X50-15, overall weight: 12,450 kg, empty load weight: 7,450 kg, total height: 2,550 mm, total length: 2,700 mm, total width: 2,500 mm, color: green, motor model: V2403-T, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 Years of Experience | In-house Service & Paint Shop 🎨 | Professional Advice 🧠 | Own Transport 🚛 | After-sales Support 🤝 Looking for a forklift you can truly rely on? We are a renowned dealer of new and used forklifts with a long-standing tradition. We serve clients all over Europe – from small businesses to large industrial operations. Our forklifts are more than just machines – they’re your guarantee of smooth and reliable logistics. ⭐ What Sets Us Apart? ✅ Every forklift undergoes a comprehensive technical overhaul (inspection, testing, oil & filter replacement, reconditioning of key components) ✅ UDT certification can be arranged upon customer request ✅ In-house paint shop and service workshop – machinery perfected both technically and visually ✅ Europe-wide transport using our own fleet and trained drivers ✅ Operator instruction on delivery + on-site performance test ✅ Post-sale service and technical support – we’re here for you after the purchase too ✅ Come and see or test our machines at our site – you’re always welcome! ✅ Hundreds of satisfied clients across Europe – join those who trust us ✅ Help with financing – we work with leading leasing companies ✅ Invoice in EUR or PLN – you choose Hjdpfey Tnf Ujx Agujn 📦 AVAILABLE NOW: COMBILIFT C5000XL – Multi-Directional Forklift 🔹 Year: 2018 🔹 Operating hours: 6,453 h 🔹 Power: Diesel 🔹 Lifting capacity: 5,000 kg 🔹 Mast: Duplex – 4,000 mm 🔹 Wide fork positioner: 3,550 mm | Forks: 1,300 mm 🔹 Superelastic tires – 100% condition 🔹 Technical condition: Excellent – after full service 🔹 Visual condition: Clean, corrosion-free, ready for work 📏 Dimensions: • Lowered height: 2,550 mm • Total length: 2,500 mm • Width: 2,700 mm • Positioner width: 3,550 mm • Structure height: 3,000 mm 🏭 Ideal For: ✔️ Warehouses with narrow aisles ✔️ Wood, steel, and pipe industries ✔️ Handling long or oversized loads ✔️ Indoor and outdoor operations

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Hodpfx Agsxlu Tajujn

Condition: used, Year of construction: 1978, functionality: fully functional, FISCHER & KRECKE 31 DF Type: Rotary flexographic printing machine Model: 31 DF | Year of manufacture: 1978 Manufacturer: Fischer & Krecke, Bielefeld, Germany Machine purpose: The machine is designed for flexographic printing on paper and various types of films, both for independent use and in a line with other machines (e.g., for bag production, cutting, or lamination). It is ideal for printing packaging materials, labels, bags, and other paper products in various weights. The machine is fully functional. Technical parameters Input material: • Number of rolls: 1 • Core diameter: 70, 76, 100, 150 mm • Max. roll width: 89 cm (throughput) • Max. roll diameter: 125 cm • Printing width: max. 85 cm • Material weight: 15–350 g/m² Printing: • Number of colors: 1–4 • Printing line: max. 64 lpi • Printing repeat: 290–660 mm • Speed: up to 250 m/min Longitudinal cut: • up to 60 g/m²: approx. 2 × 4 cm • over 60 g/m²: approx. 2 × 3 cm Gluing: paper + microtene, hot melt adhesive Output: • Core diameter: 70, 76 mm • Max. roll diameter: 107 cm Fischer Krecke 31DF printing cylinders Repeat number of cylinders number of gears Repeat number of cylinders number of gears REPEAT NUMBER OF CYLINDERS NUMBER OF GEAR WHEELS 290 3 3 300 4 4 310 4 4 320 4 4 330 4 4 340 4 4 350 4 4 360 4 4 370 4 4 380 4 4 400 4 4 420 4 4 440 4 4 460 4 4 480 4 4 500 4 4 520 4 4 Hjdpoy Uc Uysfx Aguon 540 4 4 560 4 4 630 2 2 660 3 3

Condition: used, Year of construction: 1993, press force 100 t stroke - 170 mm working lenght 3200 mm Hjdpevuk Rdsfx Agusn dayligth 450 mm table dimensions 3220 x 800 mm speed down 50 mm/s speed up 150 mm/s working speed 7 mm/s oil volume 600 l power requirement 20,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 2,6 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck year of manufacture 1975 - modernization 1993

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,453 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,350 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X50-15, overall weight: 12,450 kg, empty load weight: 7,450 kg, total height: 2,550 mm, total length: 2,700 mm, total width: 2,500 mm, color: green, motor model: V2403-T, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 Years of Experience | In-house Service & Paint Shop 🎨 | Professional Advice 🧠 | Own Transport 🚛 | After-sales Support 🤝 Looking for a forklift you can truly rely on? We are a renowned dealer of new and used forklifts with a long-standing tradition. We serve clients all over Europe – from small businesses to large industrial operations. Our forklifts are more than just machines – they’re your guarantee of smooth and reliable logistics. ⭐ What Sets Us Apart? ✅ Every forklift undergoes a comprehensive technical overhaul (inspection, testing, oil & filter replacement, reconditioning of key components) ✅ UDT certification can be arranged upon customer request ✅ In-house paint shop and service workshop – machinery perfected both technically and visually ✅ Europe-wide transport using our own fleet and trained drivers ✅ Operator instruction on delivery + on-site performance test ✅ Post-sale service and technical support – we’re here for you after the purchase too ✅ Come and see or test our machines at our site – you’re always welcome! ✅ Hundreds of satisfied clients across Europe – join those who trust us ✅ Help with financing – we work with leading leasing companies ✅ Invoice in EUR or PLN – you choose 📦 AVAILABLE NOW: COMBILIFT C5000XL – Multi-Directional Forklift 🔹 Year: 2018 🔹 Operating hours: 6,453 h 🔹 Power: Diesel 🔹 Lifting capacity: 5,000 kg 🔹 Mast: Duplex – 4,000 mm 🔹 Wide fork positioner: 3,550 mm | Forks: 1,300 mm 🔹 Superelastic tires – 100% condition 🔹 Technical condition: Excellent – after full service 🔹 Visual condition: Clean, corrosion-free, ready for work 📏 Dimensions: • Lowered height: 2,550 mm • Total length: 2,500 mm • Width: 2,700 mm • Positioner width: 3,550 mm • Structure height: 3,000 mm 🏭 Ideal For: ✔️ Warehouses with narrow aisles ✔️ Wood, steel, and pipe industries ✔️ Handling long or oversized loads ✔️ Indoor and outdoor operations Hedpey Slbdsfx Agujn

Condition: excellent (used), functionality: fully functional, maximum load weight: 20,600 kg, overall weight: 26,000 kg, first registration: 12/2005, suspension: steel, Year of construction: 2005, DE ANGELIS 3R2, year 12/2005, spring-loaded ramps, useful load capacity of 20,600 kg, approved for the transport of goods. Hsdpjy Uhviofx Aguen

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Hedpfsy Ehnasx Agujn Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm Hsdsra Rrhepfx Aguen table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: used, Dimensions (LxBxH): 770 x 400 x 410 cm Hsdjy U H Uqopfx Agusn Connection: 400 volt Saw blade diameter: 350 mm Working range: 2500 mm x 1600 mm Including lift table (2500x1500 mm) Including flexible extraction channel, fixed channels not included Total dimensions: 7700x4000x4100 mm CE compliant: no, however a possibility to be converted to a CE compliant machine like the description of lot 1 Online auction of woodworking machinery, workshop equipment, wood inventory and sawn logs and beams due to discontinued operations and warehouse and workshop closure. Including a De Meyer CNC panel sawing machine, Van Roeyen industrial dust collector, Power-Lift lift tables, full outdoor kitchen with BBQ, outdoor lounge, demo exhibition stand, sawn logs of chestnut, Douglas, oak, sycamore, elm and teak The online auction opens Wednesday 6 May and closes Thursday 25 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 26 May - Tuesday 26 May Pickup days are on: - Thursday 2 July - Thursday 2 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Dimensions (LxBxH): 810 x 570 x 235 cm Equipped with new control box, servo motors, pressure cylinders to hold plate flat Connection: 400 volt Saw blade diameter: 300 mm Maximum cutting area: 2500 mm x 1600 mm Lift table not included Control brand: IndraMotion MTX micro Equipped with safety systems such as light curtains, safety fence Including flexible extraction channel, fixed channels not included Overall dimensions: 8100x5700x2350 mm CE compliant: yes converted machine to CE compliant Online auction of woodworking machinery, workshop equipment, wood inventory and sawn logs and beams due to discontinued operations and warehouse and workshop closure. Including a De Meyer CNC panel sawing machine, Van Roeyen industrial dust collector, Power-Lift lift tables, full outdoor kitchen with BBQ, outdoor lounge, demo exhibition stand, sawn logs of chestnut, Douglas, oak, sycamore, elm and teak The online auction opens Wednesday 6 May and closes Thursday 25 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 26 May - Tuesday 26 May Pickup days are on: Hjdpfxey U H Uks Agujn - Thursday 2 July - Thursday 2 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), functionality: fully functional, empty load weight: 11,800 kg, maximum load weight: 27,200 kg, overall weight: 39,000 kg, axle configuration: 2 axles, first registration: 10/2018, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 300 mm, total length: 13,700 mm, total width: 2,550 mm, suspension: air, tire size: 245.70 R 17.5, ground clearance: 300 mm, color: light green, trailer brake: trailer braked, Year of construction: 2018, Equipment: ABS, Used De Angelis 3-axle extendable gooseneck semi-trailer, with 2 steerable Tridec axles, operated via fifth wheel and hydraulically controlled by cable and control unit. Detachable and adjustable gooseneck, extendable platform adding 5.40m to the 7.0m closed gooseneck length, air suspension, removable aluminum loading ramps, side twist locks, side wideners. Year 2018, inspected until 31.10.2026. -INTERDRIVESRL DEALERSHIP - PARMA- Hedpfey T Sbtex Agujn

Condition: new, GMN HV-X 120-45000 / 18 high frequency spindle, serial number as per photo, unused, 100% functional, scope of delivery as per photos Hjdpfx Aoi D U T Isguen

Condition: used, Year of construction: 1999, pressure 200 t chamfer lenght 4100 mm Control CYBELEC DNC 900 stroke 260 mm Hjdpfx Agoy H N Iwsuon weight of the machine ca. 16.000 kg dimensions of the machine ca. 4500x2400x3000 mm

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2004, total length: 13,750 mm, total width: 2,550 mm, wheelbase: 9,710 mm, color: other, Year of construction: 2004, Equipment: ABS, tail-lift, = Additional options and accessories = - Air horn - BPW-Assen - Sunroof = Remarks = Broshuis 3A D-45, 2004, BPW axles, Sliding roof, 9000 kg Dhollandia tail lift, 15000 kg Liftable middle deck, No sales within the Benelux! = More information = Axle configuration Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 15.030 kg Carrying capacity: 26.970 kg GVW: 42.000 kg Functional Tail lift: Dhollandia, tail lift, 9000 kg Sliding roof: Yes Maintenance APK (MOT): tested until 11/2026 Identification Hsdoy T Rbxopfx Aguen Registration number: OH-40-NZ = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 174 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 2,405 mm, fuel type: electric, mast type: duplex, construction height: 3,500 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 8.25 x 15 Rear tires Type: Superelastic Hedpfxoq E A Uzj Agusn Rear tires Size: 8.25 x 15 Battery Volt: 80V Battery Ah: 1120Ah Battery year of construction: 2022 Description: Fork positioner, sideshift, Kalmar comfort cab with heating and air conditioning, radio, battery 80 V / 1120 Ah - Nexsys - MAINTENANCE-FREE, charger, 2 LED work lights at the front on the lift mast, 2 LED work lights at the front on the roof, 2 LED work lights at the rear on the roof, indicators at the front and rear, reversing camera, safety light, safety light, rear lights at the front and rear. rear, Rear view camera, Safety-Light, Rear view mirror, Fork positioner, Sideshift, Kalmar comfort cabin with heating and air conditioning, radio, Battery 80 V / 1120 Ah - Nexsys - MAINTENANCE FREE, charger, 2 LED work lights at the front of the lifting mast, 2 LED work lights at the front of the roof, 2 LED work lights at the rear of the roof, Turn signals front and rear, backup camera, Safety light, Rear view mirror, Sideshift, Fork positioner, 3rd valve, 4th valve, air conditioning, scales,

Condition: used, functionality: unexamined, Dear Sir or Madam, We are pleased to offer the following machine for sale: Keyence XM-5000 coordinate measuring machine. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Hedpsy Iaayjfx Aguen Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: used, axle configuration: 3 axles, first registration: 07/2009, loading space length: 13,550 mm, loading space width: 2,470 mm, loading space height: 2,800 mm, total length: 14,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,450 mm, color: other, Year of construction: 2009, Equipment: ABS, = Additional Options and Accessories = Hjdpfxoy Irn Ae Agujn - EBS = Remarks = Number of axles: 3, Payload: 33,400 kg, Unladen weight: 8,600 kg, Gross weight: 42,000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2009, Body material: Aluminium, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: ON-34-DJ Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tread depth left: 11 mm; Tread depth right: 5 mm Axle 2: Tread depth left: 8 mm; Tread depth right: 4 mm Axle 3: Tread depth left: 2 mm; Tread depth right: 3 mm Weights Unladen weight: 8,600 kg Payload: 33,400 kg Gross vehicle weight: 42,000 kg Environment Emission class: Euro 0 Maintenance APK (General Technical Inspection): valid until 12.2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price classes. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) licence plates quickly arranged • Expert technical services • The security of “recognisable quality” • And much more.... Please visit our website for special offers and the complete stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request through our website. Ask directly for our European warranty package.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 159879, 🔥 PREMIUM LISTING – FISCHER MFV-1224/50 HIGH-SPEED ELECTROSPINDLE 🔥 50,000 RPM | HSK-C32 | TOP CONDITION | READY FOR PRODUCTION High-end FISCHER MFV-1224 electrospindle available for sale – a premium solution for precision grinding and high-speed CNC machining. Ideal for demanding industrial environments where accuracy and reliability are critical. ⸻ ⚙️ Key Specifications • Model: FISCHER MFV-1224/50 • Maximum speed: 50,000 RPM • Tool interface: HSK-C32 (Automatic Tool Change) • Type: High-frequency electrospindle • Built for high precision & high-speed applications ⸻ ✅ Condition & Performance • Professionally tested and verified • Excellent running condition – smooth operation • No abnormal noise, no vibration • Spindle is ready for immediate installation • No crashes, no hidden defects ⸻ 🎯 Typical Applications • Internal & external grinding • High-speed milling • Precision machining (aerospace, molds, tooling) ⸻ 📦 What’s Included • Complete spindle unit (as shown) • Carefully packed for safe transport ⸻ 💎 Why this spindle? • Premium Swiss/German engineering quality • High reliability at extreme speeds • Excellent value compared to new (save thousands €) Hedpfxoy Hpbwo Agujn ⸻ 💰 Price: [6500€ – negotiable] 📍 Location: Romania 🌍 Worldwide shipping available ⸻ 📹 Extra • Running video available on request • Additional photos & technical details available ⸻ 📩 Serious inquiries only. Ready to ship – fast deal preferred.