Used Flow Forming Machine for sale (69,300)

Condition: good (used), Year of construction: 1992, functionality: fully functional, Manufacturer: BOSCH Tip: SVZ 2500 A Maximum bag length: 400 mm Minimum bag length: 100 mm Kjdpfx Aorrv T Iedlsdt Maximum bag width: 250 mm Minimum bag width: 90 mm Maximum output: 80 bags/min

Condition: ready for operation (used), Year of construction: 1995, A horizontal flow-pack packaging machine Cavanna is available. An on-site inspection is possible. Kjdey R Dtiepfx Adledt

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, film width: 550 mm, product height (max.): 200 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink wrapping machine Manufacturer: Hugo Beck Type: Flexo 500 S Horizontal flow wrapping machine with side sealing for tubular film, consisting of a wrapping machine and a subsequent shrink tunnel. The Flexo 500 tubular film machine boasts the highest degree of variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruits and vegetables, books, skis, laminate flooring, or various household products, etc. – with this machine, you can quickly adapt to any application, for example, for daily changing orders. - Wrapping machine Hugo Beck Flexo 500 S, year of manufacture 2003 Workpiece dimensions: Width approx. 55 - 400 mm Kedpfx Asyw H Rkjdlsdt Height approx. 2 - 200 mm Length from min. approx. 80 mm to theoretically unlimited Consumable/film: half-tube, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate approx. 20 m/min. Rated voltage 400/230 V, 50 Hz, 3 phases Rated current 5 A Connected load 3 kW Machine dimensions approx. 2500 x 1500 mm L x W Weight approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture 2002 Working width approx. 600 mm Clearance height approx. 300 mm Feed rate continuously adjustable Chain slat conveyor, silicone-coated transport slats Temperature control via electric thermostat, separately adjustable lower and upper heat Heating approx. 4 - 12 kW Rated voltage 230/400 V, 50 Hz, 3 phases Rated current 19 A Connected load approx. 12 kW Machine dimensions approx. 2500 x 1100 mm L x W Weight approx. 400 kg

Condition: good (used), GIC Gainsborough Engineering model - VFB2000. Kodpfx Aezzp Azedlodt Manufacturer - Gainsborough Engineering Ltd

Condition: good (used), functionality: fully functional, Hydraulic tube end forming machine BLM (Italy) for tubes, up to 6 tools (5 follow-up tools) can be interchanged for forming Drive power: 7.5 kW Kdodpfx Adszzwpveljt Max. tube diameter: approx. 40 mm Max. forming length: 100 mm Weight: approx. 1.4 tons

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, The machine is being sold on behalf of the owner. The current owner will perform one more maintenance service for the new buyer. The machine has been used very little and has so far only packaged 6,547 units. It is ideally suited for packaging various loose food products, such as: Coffee Spices Rice Tea and much more. Since the machine is no longer needed, it is now for sale. An inspection and functional test can be arranged at any time. Condition: technically perfect, only slightly dusty. Location: 04668 Großbardau Ksdpfx Adjzvd A Solodt If you have any questions or are interested, please contact us by phone: Tel.: 0152 / 31381635

Condition: excellent (used), 1 x Wilpac WP-E820 automatic vertical form fill and seal packing machine. Foshan Wilpac Packaging Machinery Co., Ltd Kdsdoz A Dhlspfx Adljt * Machine type/model: WP-E820 series * Serial No.: WP2021190 * Year: 2021 * CE marked * Stainless steel construction * Suitable for integration with a multihead weigher for automatic weighing and bagging applications

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Ball and cylinder forming machine Brand Vemag Model BallControl XXL Year of production 2021 ⁃ For forming meat balls and cylinders ⁃ Capacity up to 200 strokes per minute depending on portion size for unfilled products ⁃ For connection to the main VEMAG HP-E series filling machine Flow distributor ⁃ Base unit, flow distributor pipes, connecting pipes in a stainless steel housing, ⁃ The distributor is mounted on a movable slider, which facilitates assembly and disassembly, ⁃ Servo drive of the cut-off plates - with full control via the VEMAG filling computer, ⁃ Metal safety guards, ⁃ Mobile design, ⁃ Frame made of stainless steel, ⁃ Dosing directly onto a 1 x 1 m tray, ⁃ Dosing onto a 1 x 1 m tray ⁃ Belt width 1000 mm, ⁃ With metal tray dispenser 1m x 1m ⁃ Trolley for dismantled parts for washing and hooks for hanging molding sets x 2pcs. Kdodpjv Ihd Uofx Adljt

Year of construction: 2012, condition: like new (used), functionality: fully functional, machine/vehicle number: 4052, Horizontal flow pack packaging machine sold with: - Conveyor - Labeling machine Kodey A Hf Sepfx Adljdt - Inkjet printer Very little used, in excellent condition. ALL WRAP RCN270 packaging machine, year 2012 Linear speed: up to 25 m/min Bag width: from 30 to 270 mm Bag length: from 50 mm to unlimited Product height: up to 25 mm Production rate: up to 150 cycles/min per lane Reel diameter: 400 mm (standard) AVERY DENISON labeling machine, type ALX 734LH: Print speed: 50 to 400 mm/s Max print width: 104 mm Ribbon width: 20-140 mm Label output: up to 400 labels Label width: 30 to 134 mm Label length: 25 to 225 mm Core diameter: 38, 76, 102 mm Roll diameter: 300 or 400 mm DOMINO A320i inkjet printer Conveyor: Conveyor belt width: 100 mm Conveyor belt length: 2000 mm Dimensions: 2000x595 H 1240 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Kdodpszhkmujfx Adlst Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Condition: ready for operation (used), Year of construction: 2022, A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Kedpfx Adjycwucoledt

Condition: good (used), Year of construction: 2002, functionality: fully functional, Manufacturer: PFM Model: Zenith Inox Year: 2002 Output: approx. 50 pcs/min Electrical power: 4.5 kW Kdjdpfx Adsxapzzjlet Weight: 680 kg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 21A10, total length: 3,120 mm, total width: 700 mm, total height: 1,930 mm, overall weight: 600 kg, input voltage: 380 V, type of input current: three-phase, power: 5.5 kW (7.48 HP), Flowpack packaging machine for packaging with PPL reels, equipped with a die for euroslot hole on the sealing and cutting unit. Kdjdpfxjxmkpge Adlst

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Kodpfx Adsx I Ecmjljdt Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Condition: used, This listing is for a Quickpouch Automated Form-Fill Seal Packaging Machine with Videojet Dataflex Printer for Quickpouch Auto loader. Kdjdoxzg Hqopfx Adlet Manuals are available on request.

Year of construction: 1975, condition: used, functionality: fully functional, We are offering this used, unidentified pastry forming machine, manufactured in 1975, for sale. Manufacturer: Model: Kedpfozh N A Iox Adlsdt Year of manufacture: 1975 Condition: used Category ID: 9 Machine type: Pastry forming machine In addition, 5-6 trolleys including matching trays for the pastry forming machine are included. Furthermore, there are 6 different rollers in excellent condition. The machine is very old, but as you can see in the video, it runs perfectly. It is ideal for a small bakery that wants to produce some excellent baked goods very efficiently. If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Kdedpfx Adszx Ergslst Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). Kdodjzwgxrjpfx Adlot 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Kdsdpfszxdqzsx Adlot Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: ready for operation (used), Year of construction: 1991, A vertical bag packaging machine Aquarius is available. Bag width range: 80mm-250mm, max. bag length: 450mm, packaging capacity: approx. 140bags/min, bag material: film, packaging product: bulk goods/piece goods. An on-site inspection is possible. Kjdpfx Asy Equgodledt

Condition: excellent (used), Otto Kremmling type oka Automata 600/7 Marzipan depositing and forming of soft mass. 25 kg blocks of Marzipan are put in squeezed through the roller and into the dies forms then goes into cooling system. Kdedjylbz Sjpfx Adlet

Condition: good (used), Year of construction: 2011, For Sale: Konig Industrie Rex I 6/5 row Range: 33 - 95 grams Year of construction: 2011 Very well maintained Diagrams available + Hopper with oil system + Spreading belts Please note: the power unit is missing. (New price of the power unit approx. €10,000) However, it is possible to connect this Rex directly to a proofer that does have a power unit. Transport can be arranged. Inspection possible on-site. Kedpfx Aow Edmfjdledt Price: €35,000,- EXW If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: ready for operation (used), A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible. Kdsdpfxeubbzzs Adlot

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars Kedpjztwx Uefx Adledt aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: good (used), Year of construction: 2013, operating hours: 18,600 h, functionality: fully functional, water pressure: 4,000 bar, Waterjet FLOW MACH 3 Year of production: 2013 Working area: 3000x2000 Working hours: 18600 Advantage of the machine DWJ - automatic compensation of the verticality of the cut Availability: 6 months Location: Croatia Parity: EXW Belišće Kdsdpswmcmtofx Adlst