Used Hurco Vmx 30 T for sale (82,894)

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe. Kjdpfozh Nczjx Aafjlw

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 36.5 [kW] - Spindle speeds : 12000 [rpm] - B Rotary Axis : 90 [°] (+/-) LINEAR AXES - Travels on X/Y/Z axes : 1525 / 660 / 610 [mm] - Rapid traverses rates (X/Y/Z) : 32 / 32 / 24 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur Klodpsy Tzc Hjfx Aafsw - Tool magazine capacity : 40 TABLE - Table dimensions : 1680 x 660 [mm] - Distance table / spindle nose (min./max.) : 12.7 - 622.3 [mm] - Maximum weight upon table : 1360 [kg] - Diameter of the C-type rotary table : 600 [mm] - Travel : 360 [°] - Maximum load on the rotary table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 69 [kVA] WEIGHT & DIMENSIONS - Machine weight : 9.800 [kg] EQUIPMENT - CNC : WinMax / MAX5 - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Klsdjtrhq Hjpfx Aafjw Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: ready for operation (used), Year of construction: 2003, X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible. Ksdpjza E Rysfx Aafjlw

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,398 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 750 kg, overall weight: 4,800 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30i was manufactured in 2017. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 15 kW, providing efficient machining capabilities. The machine includes a tool magazine with 24 positions and a robust table size of 1020 × 510 mm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30i vertical machining centre we have for sale. Contact us for further details. • Control: Hurco WinMax • Operating hours: 10,398 h Kljdpfx Asy I Uyzeafjw • Table size: 1020 × 510 mm Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm y-Weg 660 mm z-Weg 610 mm Steuerung Ultimax 4 Tischbelastung 1300 kg Drehzahl 10.000 U/min Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Kljdpfx Aajiv R Hlofsw Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Raumbedarf ca. 4,8x4,5x2,95 m

Condition: ready for operation (used), Year of construction: 2011, Offered is a vertical three-axis machining center. Travels X/Y/Z: 1524mm/660mm/610mm, table: 1675mm x 660mm, spindle speed: 12000rpm, tool holder: SK40, tool changer: 24 positions, spindle hours: 1937h (spindle replaced 10/2019), chip disposal: scraper conveyor, control system: WinMax. Equipped with 3D probe Renishaw, scraper chip conveyor, coolant system, spindle cooler, coolant spray gun, chip splash protection enclosure, flushing system for chip removal, electronic handwheel, rigid tapping, DXF software, cooling air through spindle switchable. Weight: approx. 8400kg, overall dimensions X/Y/Z: approx. 4650mm/3470mm/3030mm. Inspection possible by arrangement. Ksdpfxsy Ulmle Aafelw

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Kledpfoy Tx Nqex Aafjw

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, table load: 1,350 kg, spindle speed (max.): 12,000 rpm, Tool changer: 24 positions IKZ (internal coolant supply): 40 bar Probe: Renishaw Kodpfoyx E Nnex Aafjlw Tool measurement: Renishaw Footprint (W x D x H) (Doors closed / without control / chip conveyor): 3250 x 2220 x 2950 mm Transport weight: 8,900 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 24,550 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: Utlimax 4, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Hurco VMX 24t was manufactured in 2007. It features a SK40 tool holder and a spacious 610 x 508 x 610 mm travel in the x, y, and z axes, complemented by a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 24t machine we have for sale. Contact us for more information. Kledpfsx D Ibzsx Aafjw • Axes re-measured on 03/23 and found OK; X axis resealed • The axes number 2 and 3 were re-calibrated and found to be in good working order • only the X-axis was resealed. • Spindle hours: 24,550 hours. Additional equipment • Conveyor belt in the work area Optional • SK 40 holders • CNC high-pressure clamps (Allmatic and Homge) • Tall cabinets with cutter heads Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 1060mm/610mm/610mm, table dimensions X/Y: approx. 1270mm/610mm, max. table load: 1100kg, spindle power: 18kW, feed rate: 7600mm/min, rapid traverse: 30m/min, tool positions: 24, tool holder: SK40, speed: 12000rpm, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 450mm/3750mm/2800mm, weight: approx. 6700kg, control: Hurco Ultimax 4. Documentation available. On site inspection is possible. Kjdpoyh Nvmefx Aafelw

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Klodpfxjw Dfhzo Aafow

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Kodeu A Dnpspfx Aafjlw Serial number H-30516 Travel x-axis 760mm Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm T-slot fixture table size L 1510mm Engine power (kW) 11kW Machine weight 4800kg

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Internal coolant 20 bar 40 Tool changer 18 k RPM Spindle hSK-A63 Linear Scales Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Ultimotion software Tool change optimization software Please not vices are not with sale of machine Kljdpfx Aaex N E H Uefsw

Condition: ready for operation (used), Year of construction: 2009, A Hurco CNC vertical machining center is available. Tool holder: SK50, travel X/Y/Z: 1270mm/660mm/610mm, max. table load: 1500kg, spindle speed: 8000rpm, tool stations: 30, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4600mm/4600mm/3000mm, weight: approx. 9250kg. Documentation available. An on-site inspection is possible. Klodpfxezmh Tie Aafsw

Condition: ready for operation (used), Year of construction: 2002, A CNC machining center by Hurco requiring repair is offered, including spindle through-coolant and a chip conveyor. Travels X/Y/Z: 1625mm/860mm/760mm, operating hours: approx. 39025h, max. spindle speed: 8000rpm, tool stations: 40, tool holder: HSK40, cover of the Z-axis is defective. Inspection possible by appointment. Klodpfxezghfro Aafsw

Condition: ready for operation (used), Year of construction: 2008, A vertical 3-axis machining center by Hurco is offered, including spindle through-coolant, 3D Tool and a chip conveyor. Travels X/Y/Z: 1270mm/660mm/610mm, operating hours: approx. 47646h, max. spindle speed: 12000rpm, tool stations: 40, tool holder: HSK40, control system: Winmax. Bearing damage in the X-axis. A new spindle was installed in 2018. Inspection possible by appointment. Kledpfxszghfxs Aafsw

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2300 mm Measurements depth 2800 mm Measurements height 2700 mm Machine weight 4500 kg Kodpfx Aaox D Ikpjfslw Main Drive Spindle speed range 10000 Spindle motor power CAT40 / SK40 Number of axis 4 Movement X-Axis Movement 762 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 750 kg This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,991 h, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of axes: 5, This 5-axis Hurco VMX24t was manufactured in 2011. Ideal for complex and precise machining tasks, this vertical machining center offers advanced control technology and robust construction. Consider the opportunity to buy this Hurco VMX24t vertical machining center. Contact us for more information about this machine. Additional equipment • 24-fold changer Kjdpfx Asx Enl Eoafslw • Chipping screw • Electrical handwheel • Incl. KITAGAWA round table • IHK 30 bar Machine Benefits Technical Machine Benefits • Table size: 760 x 510 mm • Spindle cooling: yes • Number of tool positions in atc: 24 Extra Information Machine still under power

Condition: excellent (used), Hurco VMX50i (2014) 3-Axis Vertical Machining Centre Control: Hurco WinMax Travels & Capacity X Axis Travel: 1270 mm Y Axis Travel: 660 mm Z Axis Travel: 610 mm Table Size: 1500 x 660 mm Max Table Load: 2000 kg Ksdpfxjyx H Rto Aafjlw

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 40, controller manufacturer: Hurco, total height: 3,298 mm, total length: 5,662 mm, total width: 3,921 mm, overall weight: 10,900 kg, table length: 1,676 mm, table width: 660 mm, controller model: MAX5, torque: 118 Nm, distance table center to spindle nose: 622 mm, spindle motor power: 36,500 W, number of spindles: 1, rapid traverse Z-axis: 2 m/min, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rotary table diameter: 600 mm, rotational speed (max.): 100 rpm, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 1,360 kg, tool diameter: 75 mm, tool length: 249 mm, tool weight: 7 g, Equipment: CE marking, chip conveyor, 🔹 For Sale: 2016 Hurco VMX60SRTi 5-Axis CNC Machining Centre – Excellent Condition🔹 Make: Hurco Model: VMX60SRTi Year: 2016 Machine Type: 5-Axis CNC Machining Centre Condition: Excellent Control System: Hurco WinMax with Touchscreen Location: Ireland Kjdpfsuyt U Tjx Aafslw 📌 Machine Overview: Available now is a Hurco VMX60SRTi 5-Axis CNC Machining Centre in excellent condition, fitted with high-performance features and Hurco’s flexible swivel-head + rotary table configuration. This 2016 model delivers outstanding part accessibility, powerful milling capability, and robust software for advanced 5-axis work. The large table space supports both full 5-axis and standard 3-axis machining, offering maximum operational flexibility for tooling, mold-making, aerospace, and general precision engineering. ✅ Key Features & Included Options: Touchscreen display with shaded 3D graphics (real-time) 2GB RAM | 120GB SSD | USB ports Ultimotion high-speed software (profiling & data smoothing) S-Curve Acceleration & Look-Ahead Finish Control Coolant Through Spindle (CTS) NC4 Laser Tool Probe Renishaw RMP60 Part Probe Software Add-ons: Mould Maker Suite (3D Swept Surface, Helical Entry, Rest Machining) DXF Import, Ultipocket, Adaptipath Ultimonitor + Ultinet (Networking/Remote Diagnostics) Conversational/NC Merge Swivel B Axis & C Axis Rotary Table Conversational or G-code Programming flexibility 🔧 Technical Specifications: Table Size: 1676 x 660 mm Rotary Table Diameter: 600 mm Max Load (Flat Table): 1360 kg Max Load (Rotary Table): 500 kg X Travel: 1524 mm Y Travel: 660 mm Z Travel: 610 mm B Axis Tilt: ±92° C Axis Rotation: 360° Spindle Nose to Table: 13–622 mm Spindle Speed: 12,000 rpm Spindle Taper: BT40 Spindle Power: 36.5 kW Spindle Torque: 118 Nm - 2,900 rpm Tool Changer: 40 Tools Max Tool Diameter: 75 mm Max Tool Length: 249 mm Max Tool Weight: 7 kg Rapid Traverse Rates: X/Y: 32 m/min | Z: 24 m/min Rotary Table Speed: 100 rpm Power Requirement: 70 kVA Machine Dimensions (LxW): 5662 x 3921 mm Height: 3298 mm Machine Weight: 10,900 kg 📈 Ideal For: Aerospace & Defence Components Mould & Die Work Complex 3D Surface Milling Multi-Side Machining in One Setup High-Precision Part Manufacturing Hurco VMX60SRTi for Sale 5 Axis CNC Machining Centre Used Hurco CNC Machine Hurco 5 Axis CNC Ireland CNC Machining Centre with Rotary Table Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,112 h, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Hurco VMX30i vertical machining centre was manufactured in 2016. It features a spindle speed range of 10 – 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 760 mm, Y-axis travel of 510 mm, and Z-axis travel of 610 mm, along with a table size of 1020 × 510 mm and a maximum table load of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX30i machine we have for sale. Contact us for further details. • Control: WINMAX (MAX 5), dual-screen • Table size: 1020 × 510 mm • Tool changer: 30 positions • Design: New design Additional equipment • Chip conveyor • Water cooling system • Main spindle cooling Kledjyufcfepfx Aafsw • Full machine enclosure / chip protection guard • Machine work light • Machine base • Machine status indicator • DXF option • ULTIMONITOR Ethernet Kit • Materials and Tools Library • WINMAX PC Software • External spindle blower

Condition: good (used), Year of construction: 2005, Hurco VMX 64/40T Kjdpfx Ajy Ia Rleafelw Year of manufacture: 2005 Control: Ultimax Travel: X-1630 mm, Y-860 mm, Z-760 mm Spindle speed: 10,000 rpm Spindle coolant Tool changer: 40 positions Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, Make: HURCO Type of machine: VMX30 Year of manufacture: 2007 Control system: WinMax Tool holder: SK 40 x-travel: 760 mm y-travel: 510 mm z-travel: 610 mm Kodpfx Aaoydd Skefelw Speed range: 10.000 U/min max. Table load: ca. 750 kg Table dimensions: 1.000 × 500 mm Number of tools in the magazine: 24 Pl.

Condition: used, Year of construction: 2001, controller manufacturer: Hurco, controller model: Ultimax, _____ Description: Year of manuf. : 2001 Control : Hurco Ultimax Speed : 10000 rpm Movement X/Y/Z : 1020/510/610 mm Tool holder : SK 40 Kledjzng E Hopfx Aafow Spindle: Technology:Belt-driven spindle Speed:10.000 rpm Taper:SK40 Workingtable: Clampingsurface:1.020 x 610 mm In general: Toolmagazine:24 Stations Rapid travers in X/Y/Z:30/30/24 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant unit Workpiecemeasurement:Interface Touchprobe prepared, Renishaw 4.-Axis:Lehmann EA-410 Setup operations:Electronic handwheel Toolholder:Misc. used toolholder SK40