Used Ice Water System For 70 Liter Per Batch for sale (65,359)

Condition: excellent (used), Weiss Umwelttechnik WT-600/70/5 Temperature Test Chamber -70°C to +180°C Water-cooled Available for sale is a pre-owned temperature test chamber from Weiss Umwelttechnik. The unit is fully functional and has been tested. This is a temperature-only test chamber without humidity control. The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions. It is widely used in industry, development, and quality assurance processes. The temperature range spans from -70°C to +180°C. The device offers rapid heating and cooling rates and uses internal air circulation to ensure uniform temperature distribution within the chamber. Cable ports of 125 mm and 50 mm are included. Pgjdpfxjy At Sxe Adkop Technical data: Model: WT-600/70/5 Cooling / heating operation: -70°C to +180°C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 6 K/min External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Electrical connection: 3/N/PE AC 400V ±10% 50Hz Nominal power: 16 kW Nominal current: 19 A Main fuse required: 29 A slow-blow Permissible test load: Total rack capacity: 80 kg Chamber floor: 80 kg, Shelf: 40 kg Refrigerant: R 404A/R23 Weight: 675 kg For your safety as a buyer, please note the following: The following procedures are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2020, operating hours: 6,126 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, total operating hours: 6,126 h. Description: For sale is a high-quality climate test chamber from Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is designed for the simulation of temperature conditions and is ideally suited for: - Material testing - Electronics inspections - Environmental and aging tests - Quality and endurance tests The chamber can achieve both very low temperatures down to approx. -70 °C and high temperatures up to +180 °C, and can change temperatures at a defined rate (temperature ramps). Precise control allows for reproducible testing conditions. Operation is user-friendly via an integrated touch panel. Features: - Fast temperature changes (up to 5 K/min) - Even temperature distribution in the test space - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and operating hours counter included Technical Data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change speed: up to 5 K/min High precision & stability: Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time Spatial deviation: ±0.5 to ±1.0 K Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeat accuracy. Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side port: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Pgodpfx Adoyxm Ulekjp Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A (approx. 2.9 kg) R23 (approx. 1.3 kg) Weight: approx. 1,200 kg For your security as a buyer, please note the following: The following checks are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered for you by phone.

Condition: excellent (used), Here we offer you a climate chamber. Water-cooled Test chamber volume: 350 liters Internal chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature working range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate working range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH Psdoziyw Eopfx Adkjgp max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Type: CS-70/350 For your safety as a buyer, please note the following information: The following steps are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run which is monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Specifications, technical data and details may be subject to change. Errors excepted.) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone. Pgsdpfx Aozima Hjdksp

Condition: used, Emulsion splitting plant, oil-water separation system Pedpsctlaqjfx Adkjgp -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg

Condition: good (used), Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator Podpfoxz Avnjx Adkegp -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Pgsdpfx Asb A Ib Hedkjp Purified water meets legal requirements Regulations for sewer discharge

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm Pgsdpfxev Aip Us Adkep -Weight: 22 kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator Pgjdpfxefmilmj Adkep -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer:BEKO, oil-water separation system Oil and water separation device type Öwamat KT 05 -Accessories: incl. Oekosorb replacement filter, see photos Pgsdpfx Aetxkvrodkop -Dimensions: Ø 680 x 1130 mm -Weight: 73 kg with pallet

Condition: good (used), Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg Pedpeb A S I Hefx Adkogp

Condition: good (used), Emulsion splitting plant, oil-water separation system Pedpfx Adjb A I Dvjkegp The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 500 x 1000 mm -Weight: 50 kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Domnick Hunter, oil-water separator -Type: SE2015 -Dimensions: 800/480/H1085 mm -Weight: 82kg Pgodpfjig A Awox Adkjp

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm Psdpfx Aeq Ei Dbsdksgp -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: drukomat, oil-water separator -Type: drukomat 1 -Dimensions: 430/330/H680 mm -Weight: 27kg Pgsdefnxxdjpfx Adkep

Condition: good (used), Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Number: 1 filter available -Price: per piece -Dimensions: 460/500/H950 mm -Weight: 32 kg Pgedpfoctla Hsx Adkjp

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system Pgodpfxob A Sgks Adkep -Dimensions: 660/260/H700 mm -Weight: 18 kg

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Podpfx Aeb A Iy Hjdksgp Purified water meets legal requirements Regulations for sewer discharge -Weight: 70 kg

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge Pgjdjb A I Ikspfx Adkep -Dimensions: 750/600/H950 mm -Weight: 80 kg

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. Pgsdpou Nad Tjfx Adkjp After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Condition: good (used), Lifting system, Megamat, 170 kg / tray, approx. 6 m high, – used - : Price ex location: €14,500 (net), plus dismantling, etc. Manufacturer: Megamat Model: Megalift 14448/25/6010 Year of manufacture: 2000 Pgsdeyhxkmopfx Adkop Max. load capacity per tray: 170 kg Max. total load capacity: 18,000 kg Dimensions per tray: approx. 2.45 m x approx. 0.80 m Number of trays: approx. 40 units Machine dimensions: Height: approx. 6.01 m Width: 2.76 m Depth: approx. 2.70 m 3/N/PE 230/400V 10A, fuse 16A Condition: good Availability: immediately Location: BG-8800 Sliven

Condition: excellent (used), Weiss WT-270/70/10 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-270/70/10 Year of manufacture: 2006 Machine type: Temperature testing chamber / Climate testing chamber Test chamber volume: approx. 270 liters For sale is a used temperature testing chamber from the manufacturer Weiss Umwelttechnik. The unit is suitable for temperature testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development. Technical data Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 10 K/min Temperature change rate (cooling): approx. 14.5 K/min Test chamber volume: approx. 270 liters Test chamber dimensions: approx. 580 x 750 x 615 mm (W x D x H) Housing dimensions: approx. 870 x 1775 x 1745 mm (W x D x H) Pjdszgcqvopfx Adkjgp Weight: approx. 835 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A Refrigerant: R404A / R23 Refrigerant quantity R404A: 6.5 kg Refrigerant quantity R23: 2.3 kg Maximum suction pressure (ND max.): 19 bar g Maximum discharge pressure (HD max.): 25 bar g Standing pressure: 17 bar g Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side openings Insert grid / Test chamber equipment as shown in the pictures Control cabinet Main switch panel RS232 interface Documentation / Operating manual Scope of delivery 1x Weiss WT-270/70/10 Temperature Testing Chamber Existing documentation / Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), Here we offer a Millipore water purification system, Elix 3. Purifies 3 liters of water per hour. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone. Pgjdpfjzgcbzox Adkep

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Pgsdjzf Ibkjpfx Adkop Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Pgodpfx Adex Sywaskjp