Used Iemca Maestro 80/32/Up/L for sale (84,680)

Condition: ready for operation (used), functionality: fully functional, bar length: 3,200 mm, bar diameter (max.): 43 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Dkjdpfxow Rcfvo Aptot Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: as good as new (ex-display), Year of construction: 2010, Independent 2nd injection unit DEMAG Multi-plug 80 L for mounting from the side of IMM. Lab machine " like new " Djdpfx Aoiwx T Esptekt

Condition: good (used), Year of construction: 2006, Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Thermal Power 3,2 MW Dimensions 7x7x4 meters, capacity of wagoon 80 tons. Dksdpfehgkdqjx Aptet

Condition: refurbished (used), Year of construction: 2009, operating hours: 3,129 h, functionality: fully functional, machine/vehicle number: 020913QA04, control type: manual, actuation type: electric, bar length: 8,000 mm, type of input current: AC, KID 80 TYPE 16 BAR FEEDER, serial number 020913QA04 – 500KG. Year 2009 – EU 400 V 3 – 50 HZ – 3.5A – 5 KA – 806sb10001 – 000si03400. Djdpeznm E Tofx Aptekt

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder Dedpfxjznkx Do Aptskt PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for powering the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. ejection of long parts Scope of supply: FANUC Oi TF+ CNC control with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bushing unit Guide bushing type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling unit for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear machining Rear machining with 4 machining stations ER16 Drive unit for tools for rear machining, 2 stations fixed and 2 stations driven Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece remover Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adaptation up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Tool box with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control functions in standard scope of supply: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hours display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread cutting with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) Djdpfx Asvyzqfoptjkt 4 additional free M commands

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Dksdpfxezy Hu Es Aptet With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Dkedpfxszy Hkge Aptst Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: good (used), flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Nord, gear motor -Type: 1SU63A-80 L/4 i = 18.50 -Speed: 76 rpm -Engine: Nord Type SK 132 M/40 -Power: 9.2 kW / 1450 rpm Dedpfjt E D Hvsx Aptskt -Voltage: 400/690 V -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 -Dimensions: 620/320/H465 mm -Weight: 125 kg

Condition: used, mileage: 1,42,631 km, power: 353 kW (479.95 HP), first registration: 10/2005, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Internal number: #276 Dksdovh H Hujpfx Aptjt MAN TGA 32.480 8x2-6 BL Wiedemann enviro tec Super 2000, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 * Water recycling * 15,500 liter tank size * 5,500 liters of rinsing water * 10,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 4000 (water ring pump) * approx. 4,000 cbm/h * approx. 20m suction hose DN150 High pressure system * 2x URACA KD716 approx. 313 l/min at 160 bar * approx. 140m HP hose DN38 * Hydraulic flushing hose reel with approx. 40m DN16 Fresh water pump * Speck NP25 50/120 approx. 50l/min at 120 bar * Hydraulic flushing hose reel with approx. 40m DN13 Special features * Stainless steel sludge tank * Two high-pressure pumps (URACA KD716) * Suction and HP boom * Motor - start switchable from control cabinet * NMV - start can be switched from the control cabinet * Equipment cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump room raised * Central lubrication system Technical data * GGW 32,000 KG * Length 11,800 mm * Height 3,850 mm * Width 2,550 mm Chassis: Special equipment: Axle load front axle 9.0 t, battery 225 Ah, battery box, electric battery disconnect switch, operating hours counter, electrically adjustable and heatable curb mirror right, Comfortshift gearshift, flame-start system, heated fuel filter, fuel tank: 600 l aluminum, Eberspächer D4S auxiliary air heater, seat cover / upholstery: comfort quality, control module for external data exchange, reinforced front axle shock absorbers, front underride guard, offset front axle VOK-09 Further equipment: Axle configuration: 8x2, Trailer socket 24V / 7-pin, Trailer socket ABS, Anti-slip control (ASR), Electrically adjustable and heatable exterior mirrors, Exterior mirrors wide-angle and electr. adjustable and heatable, right, differential lock rear axle, EDC engine regulation, electronic brake system MAN-Brakematic, EURO 3 engine, cab: L, driver's seat comfort, tachograph, suspension: leaf / air, electric windows, generator 100 A, speed limiter 80 / 85 km/h, rear axle HY-1350, cabin filter: pollen filter, body/structure: Chassis, Rocker arm - brake EVB, Steering column (steering wheel) adjustable, Air compressor 1-cyl., Engine 12.8 ltr. - 353 kW diesel (D 2876 LF 12), Trailing axle NO-08, liftable, Radio preparation 24V, Disc brake rear axle, Disc brake front axle, Side guard, Side window, Front axle stabilizer, Plastic bumper, Rear underride guard, Electronic immobilizer, Central locking, Gross vehicle weight 32.00 t For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: used, KHS triblock filling line 45-80-10 - KHS bottle rinser, Innoclean FR-EM 45 - KHS volumetric filler, Innofill EV-VF 80 with ENDRESS+HAUSER DOSIMAG A flowmeters - ALCOA KUPI 10/540 capper (max. 25,000 bph) Output: approx. 20,000 bph Control system: S-7 Dkodpfeychaiox Aptet Year of manufacture: 1998 Complete machine documentation – several folders.

Condition: ready for operation (used), SMW Autoblok 80/32 VSNC clamping cylinder, part number 33094311, serial number 2285, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dkedpfxjzzh Rks Aptst

Condition: like new (used), Year of construction: 2020, functionality: limited functionality, operating hours: 50 h, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 80 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 72 mm, saw blade diameter: 380 mm, height adjustment type: pneumatic, actuation type: electric, total length: 7,500 mm, total width: 6,000 mm, total height: 1,900 mm, overall weight: 5,000 kg, table height: 1,000 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, AES Alpha Heavy Duty Beam Saw 3200 * 3800 mm | Showroom Condition | Less 100 Hours Category: Panel Saw / Beam Saw Condition: Used – Like new showroom machine Description: For sale: AES Alpha heavy duty beam saw. The machine has been used exclusively in a showroom for demonstrations and training. It is in working condition with less than 100 working hours. Equipped with all Yaskawa and Schneider Electric drivers. Technical Data: Cutting width: 3200 mm Bridge depth: 3800 mm Main motor: 15 kW (20 HP) Dkjdpoyzzguefx Aptet Scoring motor: 2.2 kW (3 HP) Max cutting height: 72 mm Saw carriage speed: 70 m/min Pusher speed: 60 m/min Max blade: 380 mm Max scoring blade: 200 mm 8 clamps AES Alpha Heavy Duty Paneelzaag 3200 mm | Showroomstaat | Minder 100 Werkuren Categorie: Paneelzaag / Opdeelzaag Conditie: Gebruikt – Zo goed als nieuw (Showroom) Beschrijving: Te koop: AES Alpha heavy duty paneelzaagmachine. Deze machine werd uitsluitend gebruikt in een showroomomgeving voor demonstraties en trainingen. De machine verkeert in uitstekende staat en heeft minder dan 100 werkuren. Uitgerust met hoogwaardige aandrijvingen van Yaskawa en Schneider Electric, wat zorgt voor maximale betrouwbaarheid en precisie. Technische specificaties: Snijbreedte: 3200 mm Brugdiepte: 3800 mm Hoofdmotor: 15 kW (20 HP) Voorritsmotor: 2,2 kW (3 HP) Maximale zaaghoogte: 72 mm Zaagwagensnelheid: 70 m/min Duwbalk snelheid: 60 m/min Max. zaagdiameter: 380 mm Max. voorritsdiameter: 200 mm 8 klemmen Luchtkussentafel (3 stuks): 1 vast, 2 verplaatsbaar Pneumatische zaagwagen beweging Aandrijvingen: Yaskawa & Schneider Levering: Binnen 10 dagen mogelijk Prijs: Op aanvraag

Condition: excellent (used), Year of construction: 2023, Dual-fuel burner Elco 3980kw EKEVO 7.3600 GL Weishaupt Dkjdpfxowrlayj Aptjt

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-pressure cleaner PTC CJ-2B, similar to but not an Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner… - Operating pressure: 130 bar - Flow rate: 32 l/min - Engine: Honda GX390 gasoline, 8.7 kW - Dimensions: 1160 x 580 x 710 mm Dksdpfxsgigqxo Aptot - Dry weight: approx. 80 kg - High-pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holder for gun with lance - Pressure gauge - Built-in professional pressure relief valve - Manual stainless steel hose reel with 30 m high-pressure hose 3/8" + 10 m high-pressure hose 3/16" - 2 pieces of 3/8" and 1 piece of 1/8" F pipe cleaning nozzles - Gun with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning unit, ideally suited for cleaning and removing blockages in pipes with diameters from 40 to 200 mm. It is ideal for cleaning and removing blockages in house connections, septic tanks, cisterns, and industrial waste pipes. The powerful Honda engine with an output of 8.7 kW and the Comet TW Premium pump with speed control guarantee the highest performance and reliability over time. This unit provides the optimal solution for professionals seeking an efficient and powerful machine that can handle the most demanding work situations, thanks to its robust steel frame and large pneumatic tires.

Condition: used, mileage: 28,000 km, power: 353 kW (479.95 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 14 m³, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal reference: #349 MAN TGS 26.480 6x2 BL Wiedemann Super 2000 8.0/5.0/1.0 MAN TGS 33.510 6x4 with high-performance Wiedemann Super 2000 water recycling unit (8.0/5.0/1.0). This vehicle is purpose-built for professional sewer cleaning and flushing operations, combining high suction capacity, efficient water recycling, and robust high-pressure technology in a durable and practical configuration. With a 14,000 l tank capacity, 3,000 m³/h vacuum performance, large-diameter DN150 suction pipe, and a powerful Uraca high-pressure system, this unit is ideally equipped for demanding municipal and industrial applications. Extensive control, comfort, and safety features ensure efficient operations even during extended deployments. Superstructure * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling system * 14,000-liter tank capacity * 1,000 liters of fresh water * 5,000 liters of flushing water * 8,000 liters of sludge capacity * Tank discharge by 45° tipping Vacuum System * Wiedemann & Reichhardt KW 4000 * 4,000 m³/h * Approx. 25 m suction hose DN 125 High-Pressure System * Uraca P3-45 65 – 413 liters at 175 bar * Approx. 180 m HD hose DN 32 * Hydraulic hose reel with approx. 80 m DN 13 Dodpfx Apeyg Anpetekt Additional Freshwater System * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 10 m pressure hose DN10 Special Features * Sludge tank made from material 1.4301 (stainless steel) * Suction and HD booms * 5-liter warm water hand wash system * Stainless steel toolbox * Operator cabinet with display * Engine start controllable from operator cabinet * NMV start controllable from operator cabinet * Radio remote control with display * Equipment cabinet with two hinged doors – both sides * Hose storage * Pump compartment sound insulation extended * LED work lights * Central lubrication system Technical Data * Unladen weight: 19,030 kg * GVW: 26,000 kg * Length: 9,990 mm * Height: 3,700 mm * Width: 2,550 mm Chassis * MAN * TGS 26.480 * 6x2 * 353 kW / 480 HP * EURO 6 * Automatic * Air conditioning * Self-propelled sewer cleaning machine Summary: A highly capable MAN TGS 26.480 6x2 with Wiedemann Super 2000 water recycling system, powerful vacuum and high-pressure technology, and well-designed operator and comfort features. The ideal solution for professional sewer cleaning operators who value efficiency, high performance reserves, and robust technology. For further detailed information and/or photos, please contact us directly. A wide selection of additional vehicles for SALE or RENT can be found at: Specifications, prior sale, and errors excepted. The buyer is obliged to verify the condition and equipment of the goods independently. Sale exclusively in accordance with our terms and conditions and under exclusion of any warranty.

Condition: good (used), first registration: 10/2007, total length: 10,500 mm, total width: 2,550 mm, total height: 880 mm, color: yellow, Year of construction: 2007, Unladen weight: 6,600 kg Payload: 23,400 kg GVWR: 30,000 kg Loading platform height: 88 cm Technical condition: good Optical condition: good Goldhofer TU 3-24/80 3-axle low-bed trailer Manufacturer: Goldhofer Type: TU 3-24/80 Design: 3-axle low-bed trailer Technical payload: 30,000 kg Unladen weight: 6,600 kg Drawbar: 50 mm Vehicle description Equipment * 3-axle Goldhofer low-bed trailer * Robust and torsion-resistant frame construction * Partially hydraulically operated access ramps * BPW axles * Leaf-sprung axles * 50 mm drawbar * Low loading height for safe transport * Ideal for professional heavy-duty and machinery transport Dkjdpozlfbusfx Aptet Dimensions * Loading platform length: 830 cm * Loading platform width: 255 cm * Can be widened on both sides by 21.5 cm each * Maximum loading platform width when extended: 298 cm * Loading platform height: 88 cm Access ramps * Partially hydraulically operated * Ramp length: 365 cm * Ramp width: 80 cm per ramp * Suitable for machines with steel tracks and wheeled machines * Low approach angle for safe loading and unloading ### Technical data * Axles: BPW * Suspension: Leaf spring suspension * Unladen weight: 6,600 kg * Technical payload: 30,000 kg * Robust construction for daily professional use Application areas The Goldhofer TU 3-24/80 is ideally suited for the transport of: * Excavators * Wheel loaders * Bulldozers * Mobile cranes * Aerial work platforms * Road construction machinery * Agricultural machinery * Industrial machinery * Containers and other heavy vehicles and equipment We would be happy to invite you to a non-binding inspection of the trailer.

Condition: used, mileage: 6,39,940 km, power: 132 kW (179.47 HP), first registration: 01/2007, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, loading space length: 4,550 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGL 8.180 4x2 BL Refrigerated Box Truck VIN: Y185212 Chassis / Attachments: * Wheelbase: 3,300 mm * Leaf/Air suspension * Tyres: 225/75 R17.5 * Remaining tread: front approx. 60%, rear approx. 50% * Plastic diesel tank, plastic AdBlue tank Cabin: Djdoygzq Aspfx Aptjkt * 2-seater * Storage compartment above engine tunnel * Automatic climate control * CD radio Body: * TBV insulated box body * Carrier Supra 550 refrigeration unit * 6,919 engine hours Engine / Transmission: * 180 HP / 132 kW / 4,580 cc / Euro 5 * Engine brake * Automatic transmission * Differential lock Weights: * Gross weight: 7,490 kg * Unladen weight: 5,360 kg * Payload: 2,130 kg Other: * 1 previous owner * New main inspection upon request possible * German vehicle ---- New general inspections / safety checks or modifications to the vehicle's gross weight (reduction/increase) are possible on request. We are also happy to assist you in obtaining export/temporary licence plates, as well as arranging delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors, subject to change, prior sale, and mistakes! ---- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge's particular strength is in the sales of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with the loading of your purchased vehicles. Organizing special transport We are happy to assist you in arranging special transports. Temporary/export licence plates We are happy to assist you in obtaining export or short-term licence plates. Customs formalities We are happy to assist you with customs matters.

Condition: used, mileage: 6,39,940 km, power: 132 kW (179.47 HP), first registration: 01/2007, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 4,550 mm, loading space width: 248 mm, loading space height: 2,250 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGL 8.180 4x2 BL Refrigerated Box Truck VIN: Y185212 Chassis / Attachments: * Wheelbase: 3,300 mm * Leaf / air suspension * Tyres: 225/75 R17.5 * Tread depth remaining: Front approx. 60%, Rear approx. 50% * Diesel tank (plastic), AdBlue tank (plastic) Cab: * 2-seater * Storage compartment over engine tunnel * Automatic climate control * CD radio Dkedpfx Aeygzqpsptst Superstructure: * TBV insulated box body * Carrier Supra 550 refrigeration unit * 6,919 engine hours Engine / Transmission: * 180 HP / 132 kW // 4,580 cc // Euro 5 * Engine brake * Automatic transmission * Differential lock Weights: * Gross vehicle weight: 7,490 kg * Unladen weight: 5,360 kg * Payload: 2,130 kg Miscellaneous: * 1 previous owner * New roadworthiness inspection (TÜV) available on request * German vehicle ---- New general inspections, safety tests, or weight modifications (downrating/uprating) are available on request. We are happy to assist you in obtaining export/temporary number plates, and we can arrange transportation of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability is accepted for printing or typographical errors; changes, prior sale and mistakes excepted!---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sales of new and used commercial vehicles. We offer a wide variety of vehicles on a 11,000 sqm lot. Our corporate philosophy is shaped by fairness and reliability. As customer satisfaction is our top priority, we provide an excellent all-round service package, including a dedicated contact person to assist you in the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Temporary / Export plates We are happy to assist you in obtaining export or temporary number plates. Customs formalities We are happy to assist you with customs clearance.

Condition: used, Year of construction: 2004, Milling machines Travel distance X: 880 mm Travel distance Y :630 mm Travel distance Z: 630 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 Dksdpfxezwqvnj Aptjt table size X: 1250 mm table size Y: 700 mm tool changer: 32 - time Torque: 130 Nm control Heidenhain Universal machining center NC rotary table (C-axis) integrated into rigid table Swivel milling head (B-axis) SK40 tool holder Tool magazine: 32 (2x16 positions) Cooling unit Rotary table: 700 mm Max. table load: approx. 500 kg Speed range - main spindle: 20 - 12,000 rpm Feed rates: 20 - 15,000 mm/min Torque: 130 Nm Machine weight approx.: 9.0 tons Machine dimensions approx.: 4.0 x 3.0 x 2.5 meters

Condition: used, Year of construction: 2009, Speed / U/min. intake pressure / bar weight / kg Dkjdpfsud Iwzjx Aptot total power requirement / kW Complete compressed air system - screw compressor + refrigeration dryer (Drypoint RA 500) + 2x compressed air boilers (3,000 litres each) Make: COMPAIR Motor power: 75 kW Type: LL80 7.5A Year of manufacture: 2009 Serial no.: CD1000057200 Control system: Delcos 3100 Refrigeration dryer: Drypoint RA 500 Compressed air tank: 2x galvanised tanks, 3,000 l each - total volume 6,000 l Load hours: 79,495 This compressed air system from COMPAIR offers a powerful and efficient solution for industrial applications with high air requirements. LL80 7.5A screw compressor: The compressor with a motor output of 75 kW is robust, low-maintenance and designed for continuous use. Its modern technology ensures a stable and consistent compressed air supply even under high loads. Ideal for production facilities, workshops or other industrial areas. Delcos 3100 control unit: This intelligent control unit makes it easy to operate, monitor and adjust the compressor. It ensures optimum operation, energy efficiency and protection of the system against damage. Drypoint RA 500 refrigeration dryer: An integrated refrigeration dryer is essential for removing moisture from the air. This protects downstream machines and tools from corrosion and extends the service life of the entire system. Compressed air tank - 2x galvanised tanks with a volume of 3,000 l each: The two robust, galvanised tanks offer a large storage capacity of 6,000 litres in total. This keeps the pressure stable and maximises performance.

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Material feed slide length: XLL Dkjdpfx Apjzk E Irjtet Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 Dkedpfx Apswv Trljtjt 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: new, ATiB HTUB 80/100-L RF Charger HTUB is the top-of-the-line RF charger designed for maximum performance. This range incorporates all the key features of RF chargers in terms of efficiency, power factor, ventilation, internal structure (dedicated 3 compartments), and overall flexibility. An integrated digital interface with an OLED display and built-in USB port provides the best and easiest overview/adjustment of charging parameters, diagnostics, and data reports. Key Features AC Mains Voltage: 480Vac (3ph) 50-60Hz / 600Vac (3ph) 50-60Hz Dodsxuqrwepfx Aptjkt Display: OLED/LCD display, 4 LEDs and 4 control buttons Settings: Via OLED display: current, capacity and 7 preset charging curves Via PC/laptop/USB connection: advanced programming Data Storage: Report on the last 50 charging cycles and important technical data (integrated USB port) Cooling System: Dedicated air cooling directly to the heatsink. Temperature-controlled Fan speed. Standby temperature within +104°F (+40°C) of internal components Efficiency: ≥ 92% Operating temperature: +32° to +104°F (0° to +40°C) Certification: CSA Safety Features Input protection: 3x Fast-acting AC fuses Output protection: Super-fast fuse (reverse polarity protection) Thermal protection: Probes on IGBTs, diodes, and power transformer (max. temperature adjustable) with derating Battery disconnect protection: Low-voltage safety shutdown (direct battery disconnection) Mechanical Specifications Dimensions: (L x W x H) 456 x 195 x 570 mm Protection rating: IP 21 (vertical) – Dedicated air cooling directly on the heat sink. Weight: 28 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2005, operating hours: 14,800 h, Linde H35T duplo400 / side shift / fork positioner / 2005 / 14,800 hours / LPG A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are ex works Nuland. Dsdpfxezzcvns Aptjkt Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland