Triblock volumetric filling machine

KHS EV-VF 80 + FR-EM 45 + ALCOA KUPI 10/540

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, We offer the filler Veral 60, Producer Nate Chotebor. The machine is prepared for filling of the beer. Machine after general repair of all elements - filler, closer and pump. Iisdjtrv E Uopfx Agyoh The machine is prepared for next types of bottles - 500 ,660, 750 and 1000 ml bottle. Filling capacity 20 000 bph of 500ml bottle.

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration system is used to purify various liquids. The membrane elements feature a 37/3.8 channel design, a pore size of 0.1 µm, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods, with a total capacity of 2,000 L/h per module. 1 structural frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 compressed air membrane pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, Iedpfx Agsf Dc D Hoysih 1 control unit compliant with VDE 0110/0113 CE, 1 flow meter, 1 pre-assembly of the system at the supplier's factory.

Condition: used, Year of construction: 2008, The BERTOLI H3075 dairy homogeniser is a piece of equipment used in the dairy industry primarily for homogenizing milk and cream. Here are some key points about it: - Functionality: The homogeniser works by breaking down fat molecules in the milk, ensuring a smooth and uniform mixture. This process helps to prevent cream from separating and enhances the shelf life and quality of dairy products. - Applications: It's typically used in the production of a variety of dairy products such as milk, yogurt, ice cream, and cheese. - Specifications: Although specific technical specifications can vary, common features might include: - Capacity: Often measured in liters per hour, indicating the amount of milk it can process. - Pressure Ratings: The operating pressure used during the homogenization process. - Material: Typically made from stainless steel for hygiene and durability. - Efficiency: The H3075 model is known for its efficiency in energy consumption relative to its output and performance. - Maintenance: Regular maintenance is required to ensure optimal performance, including cleaning the unit and checking parts for wear. Capacity: 10,000 Litres per hour Iiedpfxex Aa Spo Agyoh Pressure: 200 Bar Stages: 2 Electrical Requirements: 380/50 Hz Max KW : 75 Amps Requirements: 137 A Condition: Very Well Maintained Full Service in 2025

Condition: good (used), Year of construction: 2000, functionality: fully functional, pressure: 250 bar, Equipment: documentation/manual, APV Gaulin G132T-3.6P High-Pressure Homogenizer – 15,000 l/h – 250 bar – Very Good Condition For sale is a high-performance high-pressure homogenizer from APV Gaulin, model G132T-3.6P, designed for industrial use in dairy and beverage processing. This machine has been regularly maintained and is in good, fully operational condition. Ideal for applications such as milk, yogurt drinks, and similar products. Technical specifications: * Manufacturer: APV Gaulin * Model: G132T-3.6P * Year of manufacture: 2000 * Capacity: approx. 15,000 l/h * Operating pressure: up to 250 bar * Configuration: 2-stage * Pistons: 3 * Motor power: 132 kW * Application area: Milk / Yogurt drinks / Liquid products * Electrical control cabinet: included Condition: * Machine is fully functional Ijdpfxeytv Iij Agyjih * Regularly serviced during operation * No known defects * Ready for immediate use after installation

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Isdszqdagepfx Agyoih Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Krauss Maffei 650 GX SP 3000 Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars V: 960 mm Distance between tie bars H: 1110 mm Shot volume: 1284 cm3 Type: Horizontal Drive: Hydraulic Clamping force: 650 t Iijdsy Eyxdopfx Agysh Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars V: 960 mm Distance between tie bars H: 1110 mm Shot volume: 1284 cm3 Type: Horizontal Drive: Hydraulic Injection Moulding Machine – KM 650 GX Injection Unit: SP 3000 Screw Diameter: 80 mm Clamping Unit Clamping Force: 6500 kN Tool Holding Force: 455 kN Platen Dimensions (H × V): 1540 × 1440 mm Space Between Tie Bars (H × V): 1110 × 960 mm Max. Mold Height: 1450 mm Mold Installation Height (Min./Max.): 450 / 1000 mm Opening Stroke: 1000 mm Ejector Stroke: 250 mm Ejector Force (Forward/Return): 95 / 49 kN Injection Unit Screw Diameter: 80 mm L/D Ratio: 21.3 Injection Pressure: 1538 bar Shot Volume: 1284 cm³ Shot Weight (PS): 1170 g Injection Rate: 141 cm³/s Injection Speed: 133 mm/s Injection Power: 60 kW Plasticizing Rate (PS): 139 g/s Heating Power Installed: 36 kW Nozzle Retraction Force: 7 kN Drive and Energy Installed Pump Power: 90 kW Dry Cycle Time (EUROMAP 6): 3.0777 s Dry Cycle Time (KM Norm): 2.5555 s Machine Dimensions and Weight Dimensions (L × W × H): 8.03 × 2.88 × 2.45 m Net Weight: 12000 kg Max. Tool Weight: 11000 kg Oil Tank Capacity: 1180 l

Condition: good (used), Year of construction: 1983, Continuous Butter Making Machine (CBM). Brand : Simon Freres Type : MD1119 C Year : 1983 Capacity : 2.000 kg per hour butter output Input : ± 4,000 liters of cream 38-42% fat With accessories: - Water and culture dosing system - Vacuum pump Ijdpfx Agjydnzpoyjih - Controls - Piping 1 x Butter Silo Butter capacity: 2.000 kg With 2x Butter Pumps: Waukesha type: 130U1 Motor: 5.5 kW CIP return pump Description: Butter production line. Still located at the factory in Belgium. Operating principle of the production line: Continuous butter making machine. A cream pump transports the cream from the buffer tanks to the CBM. The CBM is capable of converting 4.000 liters of cream into 2.000 kg of butter. It also features a recirculation system for cooling and injecting buttermilk, a vacuum section, and injection pumps for culture and brine. Furthermore, it includes a buttermilk cooler, buttermilk and CIP pumps, a collection tank, valves, piping, and all the necessary controls. After the butter is made in the CBM, it is pumped into the Egli butter silo, which includes two Waukesha outlet pumps to transport the butter to the filling machines.

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Iijdpfxexqh I Ie Agyeh Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: used, Year of construction: 2017, Overview This CraftCan35 can filling machine was manufactured in 2017 by the British company Vigo UK (ABE). The machine has been overhauled, is currently cleaned, dismantled and safely stored and is available for immediate use. It is particularly suitable for small to medium-sized breweries that want to process 330 ml and 440 ml standard cans (202 ends). A viewing can be organized by arrangement. Technical details  - Output: up to approx. 35 cans per minute (depending on product) - Formats: 330 ml & 440 ml standard cans (202) - Filling system: 6-head filler - Closure: double seam seamer for 202 ends - Voltage / power supply: not specified - Special features: - Retrofitted rinser and dryer (Vigo UK) - Pneumatics converted to metric connections Iiedpfx Ajwzb Irjgysh - Original operating instructions available Scope of delivery  - 1 × Can filling line | ABE | CraftCan35 | 2017 - Incl. rinser and dryer (retrofitted) - Optional: Stainless steel rotary table (pack-out table) and 3 m single-track conveyor belt - Some acrylic protective cladding (some replacement required)

Condition: used, 50 m³ stainless steel tank With a flat bottom 7 units available: Ijdoz Hv Ifjpfx Agyeih 5 units with a diameter of 3.55 m and a height of 5.50 m or 5.40 m (quantities for each variant to be confirmed upon delivery). 1 unit with a diameter of 3.00 m and a height of 8.40 m. 1 unit with a diameter of 3.00 m and a height of 7.10 m. NOTE! The tanks require a concrete pad or foundation (available from us at additional cost).