Used Ixsa New Scrubber X8 5000 Charging Cycles for sale (25,711)

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Hsdpfx Asy Tyg Refher Torque: 203 Nm @ 1400 rpm Dimension: 3,500 x 1,920 x 2,200 No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.400 kg Wheelbase: 205 cm Engine type: New Holland S8000 Fuel tank: 60 litres Emission class: Euro 2

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 60 l, axle configuration: 4x4, emission class: euro2, Year of construction: 2025, Equipment: all wheel drive, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 3,908cc Torque: 257 Nm @ 1400 rpm Dimension: 3,660 X 2,010 X2,400 Gearbox type: 8F + 2R partially synchromesh No. of cylinders / aspiration: 4 / naturally Capacity (cm³): 3,908 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 54.7/75 Max. torque (gross) (Nm@rpm): 257 @ 1400 Torque rise (%) 25 Hjdoy Tyc Sepfx Afhsr Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 1.03 Optional without creeper (F+R) 12+3 Speed range (kph) 2.14 - 31.85 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1500 Maximum lift capacity at ball ends with assist arms (kg) 2000 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3275/4200 = More information = Number of cylinders: 4 GVW: 2.700 kg Wheelbase: 216 cm

Condition: excellent (used), Year of construction: 2002, stand-alone unit Hsdpfx Afjzp Dwvohjr Hours: 11,800 hours Location available upon request.

Condition: excellent (used), Year of construction: 2002, including Sheetmaster, Toolmaster, and Gripmaster Hedpozp Dwpjfx Afhor Hours: 11,800 Location available upon request Images available upon request

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,700 h, load capacity: 5,000 kg, lifting height: 8,300 mm, free lift: 2,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,800 mm, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16x7x10 1/2, rear tire type: superelastic tires (black), rear tire size: 27/10-12, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, seat heater, 🔍 Looking for a reliable forklift? We are industry specialists! 💼🚜 We specialize in selling high-quality forklifts, offering thoroughly inspected machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your company! 📦 This listing features: COMBILIFT C5000E – TRIPLEX 8300mm – Year 2013 – 🔌 ELECTRIC – FULL FREE LIFT – FORK SIDESHIFT – WIDE POSITIONER – ✅ CONDITION 5/5 🔧 The forklift is in excellent technical condition, ready for immediate use. 📊 Key Features and Technical Specifications: 🆔 Model: COMBILIFT C5000E 📅 Year of Manufacture: 06/2013 🏋️ Lifting Capacity: 5000 kg Hodpozq R N Isfx Afhsr 🏗️ Mast Type: Triplex 📏 Lifting Height: 8300 mm 🔌 Drive Type: Electric ⚙️ Load Center: 600 mm ⚖️ Total Weight: 7500 kg ⬆️ Free Lift Height: 2500 mm 🛞 Tyres: Solid, superelastic, good condition 🔘 Front Tyres: 16x7x10 1/2 – 100% TREAD 🔘 Rear Tyre: 27/10-12 – 100% TREAD 📐 Collapsed Mast Height: 3800 mm 🔍 Technical Condition: Fully functional, after service check 👀 Visual Condition: Very good 🔩 Fork Length: 1200 mm 📏 Overall Height: 2600 mm 📏 Overall Length: 2500 mm 📏 Overall Width: 2600 mm 📏 Positioner Width: 3100 mm 📞 Contact us today and let's move your business forward! 🚛📦

Condition: used, Year of construction: 2005, quick coupler Ja serial number LA03050 ja Hjdpfx Afezn Ainsher ja chain condition 60 % weight 31600 kg

Condition: used, functionality: unexamined, With this offer, you are purchasing a second-hand ‘Keyence XM-5000’ coordinate measuring machine Items for sale: 1x Keyence XM-5000 with the following accessories Includes a laptop with the relevant software Includes a carrying case Includes a battery charging station Includes a tripod Hodpfx Aey Iaayefhsr Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 537 kW (730.12 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,481 kg, input voltage: 400 V, total width: 2,250 mm, total length: 5,530 mm, total height: 2,300 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30KAV 0550 0038 537 KW Cooling capacity: 537.0 kW / 152.69 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Economizer. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube + 2 pcs. Plate (Economizer) + 2 pcs. Plate (Recuperation) Condenser: Microchannel, Aluminum Compressors: 2 pcs. Carlyle 06ZCE1H3AA06013 (screw, inverter) Type of refrigerant: R134a Number of fans: 6 pcs. (Frequency inverter) Dimensions: 5.53x2.25x2.3 m Hedezm N Uhjpfx Afhsr Weight: 5481 kg Working hours: 971/793 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 75.14 kW (102.16 HP), type of input current: three-phase, type of cooling: air, overall weight: 585 kg, input voltage: 400 V, total width: 2,180 mm, total length: 1,160 mm, total height: 2,000 mm, warranty duration: 12 months, AIRCOOLED CHILLER YORK YSAQ 75 L.FSC.KM.AVM 75.14 KW Cooling capacity: 75.14 kW / 21.36 tons (12/7 — 35°C) Year of manufacture: 2022 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP154KCE-TFD-477 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410A Number of fans: 2 pcs. (Frequency inverter) Dimensions: 1.16x2.18x2 m Weight: 585 kg Working hours: 1/1 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Hsdpfxszm Ny Rj Afhjr WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 1999, operating hours: 7,259 h, Equipment: all wheel drive, Backhoe loader New Holland LB 115, 4 PS, with articulated steering (crab steering), tires in like-new condition, backhoe has Austrian registration documents, weight: 8,300 kg, serial number: 031015705, contact: Ivelina Redl (Russian, Bulgarian, Serbian, English, German), phone number: [phone number]. Subject to errors and prior sale! Hsdpfx Afezp Sy Eshor Please note: Our office will be closed from August 1st, 2026, to August 16th, 2026, due to company holidays. We will be available again starting Monday, August 17th, 2026!

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 829 kW (1,127.12 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,481 kg, input voltage: 400 V, total width: 900 mm, total length: 2,780 mm, total height: 1,900 mm, warranty duration: 12 months, WATERCOOLED CHILLER CARRIER 30XW 0852B0010 829 KW Cooling capacity: 829.0 kW / 235.71 tons (12/7 — 35°C) Hsdpfxezl S H Do Afhor Year of manufacture: 2024 Options: Economizer. Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Condenser: Shell and tube Compressors: 1 pcs. Carlyle 06TVA819SX1D (screw) Type of refrigerant: R134a Dimensions: 2.78x0.9x1.9 m Weight: 3481 kg Working hours: 1 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 52.9 kW (71.92 HP), type of input current: three-phase, type of cooling: air, overall weight: 493 kg, input voltage: 400 V, total width: 1,070 mm, total length: 2,050 mm, total height: 1,330 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30RB 050R 0196 52.9 KW Cooling capacity: 52.9 kW / 15.04 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSF115A4ACA (scroll) Type of refrigerant: R32 Number of fans: 1 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos AC25-109, expansion vessel. Dimensions: 2.05x1.07x1.33 m Weight: 493 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Hjdpfozl S Dpsx Afhor WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 41.7 kW (56.70 HP), type of input current: three-phase, type of cooling: air, overall weight: 456 kg, input voltage: 400 V, total width: 1,070 mm, total length: 2,110 mm, total height: 1,330 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30RB 040R 0011 41.7 KW Cooling capacity: 41.7 kW / 11.86 tons (12/7 — 35°C) Hjdpfx Afszl Sixjher Year of manufacture: 2023 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSF090A4ACA (scroll) Type of refrigerant: R32 Number of fans: 1 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump Grundfos AC25-125 (Frequency inverter), expansion vessel. Dimensions: 2.11x1.07x1.33 m Weight: 456 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: repair required (used), operating hours: 2,100 h, New Holland T6.155 tractor after rollover. Starts and drives, 2100 hours. Hodpfxeyl S S Uo Afhor

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 93.4 kW (126.99 HP), type of input current: three-phase, type of cooling: air, overall weight: 743 kg, input voltage: 400 V, total width: 2,130 mm, total length: 2,280 mm, total height: 1,330 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30RB 090R 0153 93.4 KW Cooling capacity: 93.4 kW / 26.56 tons (12/7 — 35°C) Year of manufacture: 2022 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos AC25-125 (Frequency inverter), expansion vessel. Dimensions: 2.28x2.13x1.33 m Weight: 743 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Hjdpfozlfbhjx Afher Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 87 kW (118.29 HP), type of input current: three-phase, type of cooling: air, overall weight: 781 kg, input voltage: 400 V, total width: 2,130 mm, total length: 2,280 mm, total height: 1,330 mm, warranty duration: 12 months, heating capacity: 93.3 kW (126.85 HP), AIRCOOLED CHILLER/HEAT PUMP CARRIER 30RQ 090RAPI1984 87 KW/93.3 KW Cooling capacity: 87.0 kW / 24.74 tons (12/7 — 35°C) Heating capacity: 93.3 kW / 26.53 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos AC25-125, expansion vessel. Dimensions: 2.28x2.13x1.33 m Weight: 781 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Hedpfxjzldz Ts Afhjr The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2020, functionality: fully functional, cooling capacity: 81.1 kW (110.27 HP), type of input current: three-phase, type of cooling: air, overall weight: 464 kg, input voltage: 400 V, total width: 1,090 mm, total length: 2,110 mm, total height: 1,330 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30RB 080R PI1889 81.1 KW Cooling capacity: 81.1 kW / 23.06 tons (12/7 — 35°C) Year of manufacture: 2020 Options: Recuperation Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSF175A4ACA (scroll) Type of refrigerant: R32 Number of fans: 1 pcs. (Frequency inverter) Dimensions: 2.11x1.09x1.33 m Weight: 464 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Hedpfxszldu Ho Afhjr The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 63.6 kW (86.47 HP), type of input current: three-phase, type of cooling: air, overall weight: 649 kg, input voltage: 400 V, total width: 1,120 mm, total length: 2,130 mm, total height: 1,920 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30RB 060R 0337 63.6 KW Cooling capacity: 63.6 kW / 18.08 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSF130A4ACA (scroll) Type of refrigerant: R32 Number of fans: 1 pcs. (EC-fans) Hsdpfx Afezldngshor Hydraulic module: 2 pcs. water pump Grundfos AC25-125 (Frequency inverter), buffer tank 208 l. Dimensions: 2.13x1.12x1.92 m Weight: 649 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. Hedjzfwycepfx Afhsr The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Hodpfxjzpvdzj Afhor Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: used, Year of construction: 2005, operating hours: 8,315 h, Stock number: 5799 New Holland MH Plus mobile excavator with variable-geometry boom and 2-jaw grapple ----* Manufacturer: New Holland * Type: MH Plus * Year of manufacture: 2005 * kW: 98 kW / 133 hp * Tires: 10.00 - / Dual tires * Operating hours recorded: approx. 8,315 hours * Color: Yellow * Enclosed cabin * Variable-geometry boom * Grapple * 270-degree camera * Rotating beacon * Maximum speed: km/h * Additional hydraulic connections * Work lights on the front of the cabin roof Hsdpjzntg Rofx Afhsr * 270-liter diesel tank * 140-liter hydraulic tank Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have occurred in the text or information. We assume no liability for errors, changes, or sales to other parties. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 77.4 kW (105.23 HP), type of input current: three-phase, type of cooling: air, overall weight: 682 kg, input voltage: 400 V, total width: 2,180 mm, total length: 1,160 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 80.2 kW (109.04 HP), AIRCOOLED CHILLER/HEAT PUMP PANASONIC P-AQAZ0075HA.EC 77.4 KW/80.2 KW Cooling capacity: 77.4 kW / 22.01 tons (12/7 — 35°C) Heating capacity: 80.2 kW / 22.8 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland YP154K1T-TFD-GCV (scroll) + 1 pcs. Copeland YP182K1T-TFD-GCV (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Dimensions: 1.16x2.18x2 m Weight: 682 kg Working hours: 60/68 h. Hedpfszi Dq Aex Afher Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 77.3 kW (105.10 HP), type of input current: three-phase, type of cooling: water, overall weight: 392 kg, input voltage: 400 V, total width: 1,250 mm, total length: 850 mm, total height: 1,600 mm, warranty duration: 12 months, WATERCOOLED CHILLER PANASONIC P-WQE0075CA 77.3 KW Cooling capacity: 77.3 kW / 21.98 tons (12/7 — 35°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Plate Compressors: 2 pcs. Copeland ZP154KCE-TFD-477 (scroll) Type of refrigerant: R410A Dimensions: 0.85x1.25x1.6 m Weight: 392 kg Working hours: 10/10 h. Condition: Outlet CONDITION, TESTING & READINESS Hjdpfxezi Dlts Afhor The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 349.6 kW (475.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,800 kg, input voltage: 400 V, total width: 2,200 mm, total length: 5,160 mm, total height: 2,450 mm, warranty duration: 12 months, heating capacity: 363.1 kW (493.68 HP), AIRCOOLED CHILLER/HEAT PUMP AERMEC NPG1200A4 349.6 KW/363.1 KW Cooling capacity: 349.6 kW / 99.4 tons (12/7 — 35°C) Heating capacity: 363.1 kW / 103.24 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. 4-pipe system Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Hjdpfx Afozi Ddiohsr Compressors: 2 pcs. Copeland YP485K1T-TED-GCR (scroll) + 2 pcs. Copeland YP233K1T-TED-GCR (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (Frequency inverter) Dimensions: 5.16x2.2x2.45 m Weight: 3800 kg Working hours: 105/105/630/630 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Stainless steel tank 5000 L with mixer, cooling. Hedpfjvr E N Nex Afhsr In good condition They have a built-in pipe around the tank that can cool