Used Jam Hyp-505H 5Ton Hydraulic Press for sale (26,584)

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Njdpfjzvfp Hox Ab Uelg Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm Nlodpfsyuylnex Ab Ujg – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t Nlodpfxez Duxwo Ab Usg

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm Nedpfxsx Uru Nj Ab Uelg stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Nsdpsvbdpysfx Ab Uelg Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex-works: Hydraulic single-column press, Edelhoff Nljdozwuclepfx Ab Usg Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressing force 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive 7.5 kW Weight 6 tons 4 guide bolts of the upper ram are broken. These would need to be unscrewed and replaced. Apart from that, the machine is in perfect working order. Price: EUR 2,000.00 plus VAT, ex-works.

Condition: ready for operation (used), Year of construction: 2025, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm Nljdpfsztfbwsx Ab Uog -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, pressing force: 10 t, stroke length: 400 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 500 mm, table length: 400 mm, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, total length: 1,300 mm, total width: 1,000 mm, total height: 2,350 mm, overall weight: 1,300 kg, Equipment: documentation/manual, PYE 10 S/1 hydraulic press with ejector. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 10 tons. Working pressure: 16 MPa. Upper table: 360 x 280 mm. Lower table: 500 x 400 mm. Daylight: 630 mm. Cylinder stroke: 400 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Maximum force of the lower ejector: 4 tons. Stroke of the lower ejector: 160 mm. Nedpfx Abjwb Dhns Ujlg Power consumption: 5.2 kW. Weight: 1300 kg. Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Technical condition of the machine: very good. The machine has undergone a major overhaul.

Condition: excellent (used), Year of construction: 2017, Pressing force: 8,000 kN Stroke: 2,000 mm Clamping area: 4,900 x 2,500 mm Max. tool weight: 50,000 kg Njdpfx Asz A Tvxob Ujlg Approach speed: 300 mm/s Working speed: max. 60 mm/s - min. 6 mm/s Weight without tool: 225,000 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) Nljdpfx Aozvnpieb Ueg MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: used, functionality: unexamined, Hydraulic double-column deep-drawing press with a draw cushion. Nlodpfxez A Uncs Ab Uog Modified in 2002 by neff Pressen, Karlsruhe, according to VBG 7n5.2. Modification No. 55377, modification date 10/2002. Ram and table with T-slots, table with ejector bores for the draw cushion. Roller conveyor in front of the press area, light curtain on the operator side, pendant control unit with emergency stop for the ram and draw cushion. Hydraulic unit with control panel: pressure setting and manometer for the ram and draw cushion, pressure stage valves; separate control cabinet with operating panel. After-travel distance 12 mm, after-travel time 147 ms, minimum distance of the light curtain to the tool hazard area 294 mm. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; disassembly and loading upon agreement. All information without guarantee.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 4113, functionality: fully functional, operating hours: 4,109 h, overall weight: 6,600 kg, Hydraulic press brake Nsdpfxjzyanls Ab Uslg Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Max. working width: 2500 mm Max. clamping force: 100 t Back gauge: 750 mm with 2 stop fingers Condition: good Die: Multi V 7 angle Tools

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes Nledpfx Abjx Ry Nys Ueg • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: excellent (used), I sell a Lukas baler in very good condition. Nlsdpfeum Htzox Ab Ueg

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Nedjz Afhpspfx Ab Uolg Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, pressing force: 1,250 t, stroke length: 630 mm, table width: 1,270 mm, table length: 1,250 mm, overall weight: 70,000 kg, working height: 900 mm, Equipment: safety light barrier, Dieffenbacher P0-F 1250A press A press in very good technical condition, available for sale from a stamping shop that is being closed down in Poland. Modernized in 2016. Nlsdpfx Ajv E Rihob Ueg Features a new Simatic S7 control system and a new electrical cabinet. Optical barriers have also been installed.

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Nodsumk Naopfx Ab Ujlg Model: 7092513 Type: HES16MP General: Display: 0-400kp/cm2 / 0-25Mp

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 500 t, table width: 1,500 mm, table length: 2,000 mm, oil tank capacity: 1,200 l, total length: 3,500 mm, total width: 2,400 mm, total height: 6,000 mm, overall weight: 45,000 kg, installation height: 1,000 mm, Equipment: safety light barrier, HIDROLIKSAN HCFP – 500-ton Hydraulic Tryout/Testing Press for Toolmaking and Forming Technology The machine is a tryout/testing press for tools in the field of forming, deep drawing and toolmaking. It is fully functional, ready for operation and can be inspected and tested while powered on. The press frame consists of a 4-column construction, a generous working area and a hydraulic system with REXROTH pump technology. The control system is a SIEMENS S7-1200 with a touch panel and extensive parameterization options. Scope of delivery & Accessories Tool sliding and lifting ball system GÜTHLE Hydraulic foot pedal (GÜTHLE) Roller bolster/carrier console 10 t (GÜTHLE) 4-channel tool clamping system (length 1500 mm, 2 t per channel) Complete REXROTH hydraulic unit Air cooler Condition of the machine Fully functional Hydraulic system is leak-free and runs smoothly Control system & electrical components in good condition Mechanically sound, no visible damage The machine is in assembled condition and can be demonstrated while powered on. Press force: Nominal force: 500 t Max. press force at 250 bar: approx. 510 t Dimensions & Weight: Overall dimensions approx.: 3500 × 2400 × 6000 mm Total weight: approx. 45,000 kg Working area: Table area: 2000 × 1500 mm Column spacing (internal): 2000 × 900 mm Installation height: 1000 mm Stroke: 800 mm (linearly adjustable via linear measuring system) T-slots available (mounting positions to be defined by customer) Hydraulic system: Nledox D Tv Djpfx Ab Ueg Main cylinder Number: 2 Piston Ø: 340 mm Rod Ø: 280 mm Auxiliary/planing cylinder Number: 2 Piston Ø: 120 mm Rod Ø: 70 mm Draw cushion Force: 150 t Cylinder: 2 × Ø 310 × 210 mm Stroke: 400 mm Pumps and tank Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min Hydraulic tank: 1200 L Oil system: 1000 L filling capacity Speeds Forward stroke: 120 mm/s Return stroke: 150 mm/s Working/pressure stroke: 12 mm/s Control & Safety: Control system SIEMENS S7-1200 + ET200S 12" Touch Panel Schneider Electric Operating modes: Two-hand automatic mode Setup mode Single stroke Stroke without draw cushion Deep drawing mode with draw cushion Measuring & safety components Linear measuring system Novatechnik (63 Bit) for ram and draw cushion Light barriers SICK at the front and rear (height: 1050 mm) Side protective grilles with limit switches Remote maintenance via Ethernet possible Mobile control panel International Note Block (DE/EN) German Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel or loading assistance. Collection only by prior appointment. English Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony/ Germany

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, stroke length: 400 mm, table width: 600 mm, table length: 600 mm, Equipment: documentation/manual, OZKOC 300 tons hydraulic press monoblock frame New in 2025, almost new Table 600x600 mm Stroke 400 mm Nsdey Szm Njpfx Ab Ujlg

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Nlodpfx Abovbdyfj Usg Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, stroke length: 500 mm, table width: 800 mm, table length: 800 mm, Equipment: documentation/manual, HURSAN 300 tons hydraulic press Year of manufacturing 2021 Table 800x800 mm Nedpfxjy Szqnj Ab Uelg Stroke 500 mm

Condition: used, Year of construction: 1966, Technical details: pressure: 16 t Njdpfez Dgczox Ab Uelg distance between columns: 450 mm stroke: 350 mm total power requirement: 3 kW dimensions of the machine ca.: 1,2 x 0,8 x 2,5 m

Year of construction: 2026, condition: new, functionality: fully functional, The new KORPLEG PS range: • Multi-axis press brakes (X, Y1, Y2, R, Z) for greater precision and productivity • A robust and durable mechanical design • Very quick and easy operation • Ultra-comprehensive standard equipment • An affordable budget with no hidden costs or surprises Machine equipped with an ESA 630 CNC control system with a 10" graphic display, controlling the 4 axes X, Y1, Y2 and R, plus two external axes, for controlling the machine pressure and the crowning table. • High-precision digital rules for bending (Y1, Y2 axes, controlled by CNC). • CNC-controlled bending pressure regulation • Hydraulic crowning table with CNC-controlled pressure • A complete set of punches, 135 mm height, standard (deer foot), straight or gooseneck (to be specified) • A multi-V die with chain-driven reversal or single-V dies (to be specified) • Quick-release clamps for punches with a push button for quick removal of segmented tools • 2 front part support arms, mounted on linear guides for easy movement Machine equipped with an ESA 630 CNC control system with a 10" graphic display, controlling the 4 axes X, Y1, Y2 and R, plus two external axes, for controlling the machine pressure and the crowning table. THE MECHANICS AND HYDRAULICS DEDICATED TO BENDING • High-precision digital rules for bending (Y1, Y2 axes, controlled by CNC). • CNC-controlled bending pressure regulation • Hydraulic crowning table with CNC-controlled pressure • A complete set of punches, 135 mm height, standard (deer foot), straight or gooseneck (to be specified) • A multi-V die with chain-driven reversal or single-V dies (to be specified) • Quick-release clamps for punches with a push button for quick removal of segmented tools • 2 front part support arms, mounted on linear guides for easy movement THE REAR MECHANISM: BENDING STOP ASSEMBLY • Rear stop (X-axis), driven by a servomotor and mounted on high-precision (0.05 mm) ball screw linear guides • Height-adjustable rear stop (R-axis), driven by a servomotor and controlled by the CNC. Nsdpezcyx Defx Ab Ujlg • 4 retractable bending stops that can be moved transversely (Z-axes): 2 manually and 2 with a joystick (Option Z1, Z2 digitized with CNC 640 or 650) OPTIMIZED OPERATOR SAFETY WHILE MAINTAINING GOOD ERGONOMICS: • Side guards with safety barriers and a Class 4 safety module • Rear protection with safety barriers • Assembly with 2 up/down pedals and an emergency stop. • All emergency stops and barriers are connected to a safety module that must be reset in the event of a stop. NUMERICAL CONTROL WITH TOUCH SCREEN: Thanks to the graphics and touch screen, programming and operating a press brake has never been so simple and intuitive. • Making a complex part becomes straightforward • Making simple parts becomes accessible to everyone

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Hydraulic Frame Press HESS LUX 2000 Nlodpfx Absxl Dv De Uog The machine is fully operational and in good condition Maximum working dimensions: 4300 x 2600 mm 3 top and 3 side cylinders Electric dimension adjustment from the control panel.

Condition: new, pressure 200 t stroke 400 mm daylight longitudinal/sideways 1300 /450 mm dayligth 900 mm tank capacity 75 l liter capacity 22 l feed down 6,9 mm/sec feed up 12,6 mm/sec Motor output 7,5 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,5 x 1,1 x 2,6 m Presses can be operated both by hand and by motor. Nlodpfx Absfm T Hgo Usg Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee