Used Jewa Complete Coating Unit for sale (37,653)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: Crodpfxewzl Hxo Aa Nsb During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h Credpfx Aswfgbrea Neb ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating Codpfxswfhu He Aa Norb ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: new, Year of construction: 2025, total height: 982 mm, total length: 4,000 mm, total width: 1,100 mm, volume flow: 18,000 m³/h, warranty duration: 12 months, Extraction wall with 18,000 m3/h Max. power consumption 5 kW/h Crjdowz Ic Nepfx Aa Njb Electric motor 4 kW Air unit 18,000 m3/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Crsdpfx Aajxa Hzxo Njb Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. Crodpfxjxa Hx Re Aa Nob The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,400 mm, total height: 2,210 mm, total width: 1,505 mm, type of input current: three-phase, warranty duration: 24 months, temperature: 250 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, Equipment: emergency stop, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ PEF-2.5 ELECTRIC POWDER FIRING OVEN WIDTH (INTERIOR): 1,505 mm HEIGHT: 1,800 mm (from the air duct) LENGTH (INTERIOR): 2,500 mm ➢ The thermoblock unit measures 785 x 1,800 x 2,210 mm. The heating capacity is 30 kW/h. A circulating fan is 1.5 kW/h (1 pc.), and an exhaust fan is 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails are manufactured for trolleys in the dimensions indicated on the floor panels. ➢ Specially designed air duct ensures uniform air distribution in the curing oven. ➢ The electrical switchgear is made of Siemens and Schineider. This curing oven does not have a PLC system. PLC is available as an option. ➢ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and light signal is emitted by the buzzer. ➢ Additionally, a product transport cart with cast wheels is located inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200mm (dimensions including fan) ➢ Teflon filters: 4 pcs. ➢ Filter suction fans: 4 kW x 1 pc. (6,000 m3/h – 200 mm SS) ➢ 36 W LED lighting x 1 pc. ➢ Bottom drawer x 1 pc. ➢ Control panel for controlling air intake and pressure blasting ➢ DELTA frequency converter ➢ Heavy-duty rollers under the paint booth. ➢ An additional filter is located at the fan outlet. ♨️ Ramp heating mode (optional) Precisely control temperature progression and dwell times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault Crodpfewdtfujx Aa Njb 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: good (used), Year of construction: 2013, It was disassembled from a working machine, all is working. All cards shown in the picture are for sale. Crsdeurk E Sepfx Aa Nob

Condition: excellent (used), functionality: fully functional, Box forming Codpfxou Ivdto Aa Nsrb Inner bag thermoforming Pasta filling Top filling Sealing

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Cjdpfx Aeya Hvqja Njrb Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Crsdpfx Aashwv N Hs Neb Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Codoq N Ud Iopfx Aa Nerb Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: used, functionality: fully functional, mileage: 3,96,911 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Csdpfx Aaoy Ndk Ss Nsrb Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps.

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: BUD-MASZ Monterrey tile profile roofing sheet production line Condition: used, but fully operational. The line is currently connected to production – it can be tested on-site. Technical specifications: Manufacturer: BUD-MASZ (Poland) Profile: Monterrey Year of manufacture: 2007 Motor power: 15 kW Designed for forming steel roofing sheet with tile profile Robust frame construction ensures stable and precise operation Line purpose: Crodpfx Aoxhgl Tea Neb The equipment is intended for profiling steel sheets into roofing sheets with a tile imitation profile. Suitable for both serial production and custom orders. Manufactured in Poland, ensuring reliable quality and long service life. The machine is connected – inspection and test run are possible. If you have any further questions, we will be happy to assist you.

Condition: used, functionality: fully functional, mileage: 2,52,801 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Cedsy Ivz Tspfx Aa Njrb Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: used, functionality: fully functional, mileage: 3,04,100 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior Csdpfxey Ivzyo Aa Nerb LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: used, functionality: fully functional, mileage: 3,80,342 km, power: 331 kW (450.03 HP), first registration: 06/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Credpfx Aaey Ivztj Neb Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: used, functionality: fully functional, mileage: 3,42,171 km, power: 368 kW (500.34 HP), first registration: 09/2023, fuel type: diesel, overall weight: 8,287 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Credpfx Ajywgz Asa Njb Predictive Cruise Control: I-See. Map based topography information. Globetrotter XL Cab, extra high sleeper. Single energy battery system (2 batteries). D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Aux. cab heater: 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres - 315/60 R22.5. Rear tyres - 315/60 R22.5. SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel. Wheelbase 3800 mm. 650 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 610 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Technology Secondary colour information display. FMS gateway for Fleet Management System. Exterior LED headlamps. Static corner lights - works with indicator at low speed to light up direction. Front fog lights - white.

Condition: used, functionality: fully functional, mileage: 2,90,075 km, power: 353 kW (479.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e. MAN TipMatic Efficiency Plus driving program, without kickdown function Advanced Emergency Brake Assist (EBA). Cjdpfxey Iafvj Aa Norb Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed.

Condition: used, functionality: fully functional, mileage: 3,89,159 km, power: 338 kW (459.55 HP), first registration: 05/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Cedpfx Ajy Hu Icea Nsrb Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Exhaust brake control Side Collision Avoidance Support Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lane Departure Warning with Active Steering Active Lane Keeping Assist

Condition: used, functionality: fully functional, mileage: 4,00,369 km, power: 338 kW (459.55 HP), first registration: 04/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Exhaust brake control Side Collision Avoidance Support Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Crsdoy Hu H Sspfx Aa Nob Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lane Departure Warning with Active Steering Active Lane Keeping Assist

Condition: used, functionality: fully functional, mileage: 2,70,606 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,177 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Globetrotter XL Single energy battery system (2 batteries) NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Crsdpfx Aajy Hphqs Nsb Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21R22.5 Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive axle ratio: 2.31:1 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Fleet Management System gateway - required for telematics and Dynafleet dealer fit. Exterior LED headlamps V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor

Condition: used, functionality: fully functional, mileage: 3,97,408 km, power: 331 kW (450.03 HP), first registration: 06/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cruise control with active prediction Codpeyxn Slefx Aa Nsrb Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lane Departure Warning with Active Steering Active Lane Keeping Assist

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Cedsxmt Eqopfx Aa Nsrb

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction Cjdpfxeyc Idbs Aa Nsrb • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments