Used Kastor Ws25-40 for sale (21,959)

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Bwsdpsdkbf Njfx Af Asu -Sheet metal claws -Span width: 25 to 75 mm -Load capacity: 2500 kg -Number: 1x terminals available -Price: per piece -Weight: 21 kg

Condition: used, mileage: 10,00,820 km, power: 220 kW (299.12 HP), first registration: 01/2011, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: beige, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Bwodpfx Afjz H Ecfo Aju Mercedes Benz Citaro O530 Ü 100 Km/h (40+1+3 emergency seats) with seatbelts, full air conditioning (Vehicle 729) First registration: 18.01.2011 1,000,820 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 04/2027 Permissible gross vehicle weight (GVW) 18,600 kg, unladen weight 11,760 kg, payload 6,840 kg Overall length 11,950 mm x overall width 2,550 mm x overall height 3,400 mm Tires 275/70R22.5, front approximately 90%, rear approximately 40/40% Double doors front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Electric windows 2 x electric + heated mirrors Full air conditioning Auxiliary heating + 2nd heater Stop brake 40+1+3 emergency seats Emergency exit 12-volt socket Chassis with slight surface rust 01.12.2024: Air suspension on the rear axle, left side, replaced 20.02.2024: Air conditioning compressor replaced 20.03.2024: Axle ventilation replaced ABS sensor on the rear axle, right side, replaced with sealant Rear axle hub replaced Front axle triangular wishbone replaced 06.05.2024: Rear axle, right side, sensor replaced 10.07.2024: Triangular wishbone, right side, lower arm replaced Air suspension on the rear axle, left side, rear, replaced Multi-circuit safety valve replaced 24.09.2024: Water hose for transmission cooler, thermostat, and water filter replaced 08.08.2025: Front axle brake pads replaced 08.08.2025: Rear axle brake pads replaced 06.01.2026: 6 x valve covers replaced 20.02.2026: Seal between crankshaft and flywheel replaced Stabilizer bar on rear axle replaced Various signs of wear and tear, consistent with age Last inspection on 02.10.2025 at 974,472 km, next inspection due at 1,034,472 km Price: 8,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change.

Condition: used, Year of construction: 2023, machine/vehicle number: 15718, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2023 - Serial number: 15718 Bedpez Aa Hasfx Af Aowu - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, mileage: 9,57,684 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: green, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty or guarantee, we can offer you the following vehicle, subject to availability and prior sale, until a final agreement is reached: MB Citaro O530 LE 40+56+1+1 (Vehicle No. 260) Date of first registration: 01/29/2008 Mileage: 957,684 km Engine: 11,967 ccm Bedpfxozvty To Af Aswu Power: 220 kW / 300 hp Bluetec 5 Valid TÜV (technical inspection): 12/2026 Permissible total weight: 18,000 kg / 19,000 kg Unladen weight: 11,450 kg Payload: 6,550 kg Overall length: 12,040 mm x Overall width: 2,550 mm x Overall height: 3,400 mm 40 seats, 56 standing places, 1 wheelchair/mobility scooter space, 1 driver's seat Manually folding ramp for strollers/wheelchairs Single door at the front, double door at the rear Fully automatic transmission Microwave Electric windows and mirrors Lawo Topform CU 3 Radio/CD player Tachograph Air conditioning + auxiliary heater Tire size front: 275/70R22.5, approximately 90/90% tread remaining; rear: 275/70R22.5, approximately 30/30% tread remaining Price: €5,500.00 (net) All information is provided without any warranty or guarantee. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 20,544 h, load capacity: 7,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,900 mm, fork carriage width: 1,460 mm, fork length: 1,500 mm, total length: 5,000 mm, drive type: Diesel, construction width: 2,350 mm, Side loader Load center: 600 ISO class: FEM 4B Mast type: Telescopic Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 355/65-15 Front tire condition: 20 - 40% Bwedpfsz If Drsx Af Asu Rear tire type: Superelastic Rear tire size: 2 x 355/65-15 Rear tire condition: 20 - 40% Battery year of manufacture: 2007 Additional single hydraulic circuit, integrated fork adjustment device, full cabin with heater, DPF diesel particulate filter, 2 x work lights at the front.

Condition: good (used), Year of construction: 1997, Well-maintained, used column drill from Alzmetall. Bwedpoz H T Euefx Af Aju Model: Alzstar 40 Capacity: 40mm.

Condition: used, mileage: 11,54,633 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: green, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: MB Citaro O530 LE 40+56+1+1 (Vehicle 255) First registration: January 29, 2008 1,154,633 km Engine: 11,967 cc 220 kW / 300 hp Bluetec 5 Bodpfx Aezvtygjf Aswu MOT valid until: 12/2026 Permissible gross vehicle weight: 18,000 kg / 19,000 kg Unladen weight: 11,450 kg Payload: 6,550 kg Overall length: 12,040 mm x Overall width: 2,550 mm x Overall height: 3,400 mm 40 seats, 56 standing places, 1 wheelchair/walker space, 1 driver's seat Manually folding ramp for strollers/wheelchairs Single door at the front, double door at the rear Fully automatic transmission Microwave Electric windows + mirrors Lawo Topform CU 3 Radio/CD Tachograph Air conditioning + auxiliary heater Tire size front: 275/70R22.5, approximately 60/50% tread; rear: 275/70R22.5, approximately 90/90% tread Skirts will be installed Price: €5,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, No. 04554 Granulator / cutting mill Alpine RO 40/63 Used Bwsdpfxoz Iav Ao Af Aju Robust granulator / cutting mill for the size reduction of plastics, blown film and cables Motor power 22 kW Rotor width 630 mm Rotor diameter 400 mm Rotor knives: 5 rows with 3 knives each Stator knives: 1 row at the front and 2 rows at the rear, with 3 knives per row Maximum permissible speed of the drive shafts 560 rpm 2 inspection openings Screen hole diameter approx. 12 mm Feed opening approx. 630 x 300 mm LW Feed hopper dimensions approx. 850 x 600 mm LW The hinged screen holder allows easy screen changes and facilitates access for cleaning the machine and replacing the knives. Ideal for recycling applications (blown film, cables, plastics, etc.) and food processing (tea, spices, dried vegetables, etc.). Machine ready to plug in, incl. power cable and 63 A plug Transport dimensions machine approx. 1600 x 1500 x 1800 mm LWH, hopper approx. 1400 x 1200 x 800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 3,000 h, SCM Accord 40 fx – CNC Machining Center for Timber Construction (Complete description available in the attachment) Used Machine, Year of Manufacture: 10/2022 Consisting of: - R21431 Accord 40 fx – Working field X-Y = 9000 x 1905 mm, Z = 350 mm, quantity: 1 - OF0158 Usable pass-through height Z = 350 mm (with H50 vacuum cups), quantity: 1 - OF0165 Traversing speed on all axes, Accord 40 fx (PRO-SPEED version), quantity: 1 - OF0168 Pendulum operation, quantity: 1 - OF0169 Automatic axis lubrication, quantity: 1 - OF0299 TELESOLVE remote maintenance via Internet, quantity: 1 - 450328 eye-M PRO operation console with integrated PC, quantity: 1 - 450291 Additional fixed operator panel, quantity: 1 - 870068 TECPAD – remote control for machine functions, quantity: 1 - 560058 No. 10 MATIC support rails, L1825, quantity: 1 - 230237 MAXI working unit – Prisma T, quantity: 1 - 870031 Chip hood on the electric spindle, adjustable, quantity: 1 - 870109 Preparation for angle gear "Prisma T-S", quantity: 1 - 470014 Air nozzle for tools, quantity: 1 - 870119 Tool length measuring device, quantity: 1 - 870016 BRC working unit, quantity: 1 - 510014 Jaw preparation H145 for worktable with 10 support rails, quantity: 1 - 480178 Front stop row H110 for worktable with 10 support rails, quantity: 1 - 480105 Rear stop row H110 for worktable with 10 support rails, quantity: 1 - 480137 First lateral stop row H110 for worktable with 10 support rails, quantity: 1 - 480005 Vacuum cup H110 145x145 mm, quantity: 12 - 480006 Rotatable vacuum cup H110 145x55 mm, quantity: 8 - 480018 Rotatable vacuum cup H110 145x30 mm, quantity: 5 - 480049 Rotatable vacuum cup H110 200x40 mm, quantity: 5 - 480149 First lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480153 Second lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480107 Round pneumatic clamping cylinders H145, quantity: 8 - 480108 Square pneumatic clamping cylinders H145, quantity: 30 - 480111 No. 6 lifting devices with double stroke H145, quantity: 1 - 450289 Laser and reference stop H145 for arcs (left), quantity: 1 - 350016 Vacuum pump 250 (300) m³/h – 50 (60) Hz, quantity: 1 - 190046 PRO-SPEED safety system, quantity: 1 - 210057 TRC 48 – rear-side tool magazine, quantity: 1 - 210190 MACH 5 – quick-change system, quantity: 1 - 870236 RTCP setting – self-calibration system for Prisma working unit, quantity: 1 - Air conditioning for the control cabinet, quantity: 1 - 450288 Safety enclosure with vertical ON-OFF adjustment, quantity: 1 - 210852 SCM angle head HSK 63E – underfloor milling unit, quantity: 1 - OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE, quantity: 1 - OF0543 Operating system Windows 10 embedded 64 bit, quantity: 1 - OF0422 Machine control interface software Maestro cnc, quantity: 1 - OF0435 Hardware dongle for Maestro cnc, quantity: 1 - 524309 Maestro 3D-Advanced module, quantity: 1 - 630359 Additional hardware dongle for Maestro cnc (for USB port), quantity: 1 - 523687 ProView simulation software, quantity: 1 Bwsdpfxoyzgxcj Af Aou - 109993 MACHINE LANGUAGE: German, quantity: 1 - SPEC01 Special design – Special Accord 9 meter processing in X - SPEC02 Special design – 2 pieces push-in double-stroke aids H145 - SPEC03 Special design – Spare spindle Maxi-Prisma-T

Condition: used, mileage: 8,72,108 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: green, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty or guarantee, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typos, and prior sale: MB Citaro O530 LE 40+56+1+1 (Vehicle No. 269) First registration: January 29, 2008 872,108 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 MOT valid until: 12/2026 Permissible total weight: 18,000 kg / 19,000 kg Bwsdpfxezvtyts Af Asu Unladen weight: 11,450 kg Payload: 6,550 kg Overall length: 12,040 mm x Overall width: 2,550 mm x Overall height: 3,400 mm 40 seats, 56 standing places, 1 wheelchair/pram space, 1 driver's seat Manually foldable ramp for prams/wheelchairs Single door at the front, double door at the rear Fully automatic transmission Microwave Electric windows and mirrors Lawo Topform CU 3 Radio/CD Tachograph Air conditioning + auxiliary heating Tires: front 275/70R22.5, approx. 90/90%, rear 275/70R22.5, approx. 30/40% Price: €5,500.00 (net) All information is provided without any warranty or guarantee. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Condition: used, mileage: 7,92,972 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty or guarantee, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typos, and prior sale: MB Citaro O530 LE 40+56+1+1 (Vehicle 250) Registered: 01/29/2008 752,972 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 MOT valid until: 09/2026 Permissible gross vehicle weight: 18,000 kg / 19,000 kg Unladen weight: 11,450 kg Payload: 6,550 kg Overall length: 12,040 mm x Overall width: 2,550 mm x Overall height: 3,400 mm 40 seats, 56 standing places, 1 wheelchair/walker space, 1 driver's seat Manually folding ramp for strollers/wheelchairs Single door at the front, double door at the rear Fully automatic transmission Microwave Electric windows + mirrors Lawo Topform CU 3 Radio/CD Tachograph Bwsdpszvtymsfx Af Aeu Air conditioning + auxiliary heater Tires, front: 275/70R22.5, approx. 40/40%, rear: 275/70R22.5, approx. 30/30% Price: €5,500.00 (net) All information is provided without any warranty or guarantee. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties up to a dispute value of €10,000 is the district court of Ludwigslust; for dispute values exceeding this amount, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, functionality: fully functional, Year of construction: 1990, color: beige, loading space length: 5,500 mm, Roll-off container, 17 m³, 5.5 m, €1,500.00 net Roll-off container, 20 m³, 6 m, €1,700.00 net Bedez E R Ttjpfx Af Aowu Roll-off container, 36 m³, 6.5 m, €1,800.00 net Roll-off container, 40 m³, 7 m, €2,200.00 net Additional containers available. Loading possible.

Condition: good (used), Column drill press, without table. Bwedpfjz Ih Dzjx Af Aju

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm Bodpfxey Hl Iyo Af Ajwu 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: good (used), Year of construction: 2010, Used 6-meter CNC drilling machine by CMA Bwodpfxezz N T Te Af Aou Type: TRD 40 CNR 6000 Table length: 6000 mm Table width: 600 mm Max. drilling diameter: 40 mm Flow drill option Cooling system Year of manufacture: 2010

Condition: used, Year of construction: 2012, 2012 MultiWeigh HDW 20-40-60 TWIN multihead weigher with 20 weigh hoppers – used 20-head multihead weigher in TWIN configuration, built for frozen meat. The MultiWeigh HDW 20-40-60 TWIN is a multihead weigher with twenty weigh hoppers, made by HD-Wiegetechnik in Wetzlar. Thanks to the TWIN configuration the machine can run as two weighers and discharge two portions at once, or use all twenty hoppers for one heavy portion. The range runs from 230 grams to 5 kilos per weighment, with a 5-gram scale interval. The machine was built for frozen meat (product range 0 to -15 °C): dimpled stainless steel contact parts the product does not stick to, a wash-down IP65 build and an IPC controller with colour touchscreen. Built in 2012, complete with dispersion cone, feed pans and accessories. It is in Emmeloord and can be viewed and tested with your product. Key features - Twenty weigh hoppers in TWIN configuration: two portions at once or one heavy portion - Weighing range 230 grams to 5 kilos, 5-gram scale interval - Built for frozen meat, product range 0 to -15 °C - Dimpled stainless steel contact parts, wash-down (IP65) - IPC controller with colour touchscreen and a programme per product - Complete with dispersion cone, feed pans and accessories Why a TWIN weigher For every weighment a multihead weigher picks the combination of hoppers that comes closest to the target weight. With twenty hoppers the controller has plenty of combinations to choose from, and in TWIN mode the machine splits them over two outlets. One weigher then feeds two packaging machines or two lanes. For large portions you run all twenty hoppers to a single outlet. That makes the machine suitable for small retail packs as well as foodservice portions of up to 5 kilos. Refurbishment if you want it Take the machine as it stands here, or let us go through it first in our own workshop: inspection, replacing wear parts, cleaning and testing with your product. Exactly what is done is agreed per customer. Bwedpoz Hqzgjfx Af Aju Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Multihead weigher, TWIN configuration Condition: Used Number of weigh hoppers: 20 Weighing range: 230 - 5,000 grams Scale interval: 5 g (dw) / 10 g (d), accuracy class X1 Product: Frozen meat, 0 to -15 °C Controls: IPC611-W1200 with colour touchscreen Construction: Stainless steel, dimpled contact parts, IP65 Connection: 400 V, 50 Hz; compressed air 6 bar

Condition: excellent (used), operating hours: 8,640 h, Maximum height 260 mm Turning length 600 mm Max. swing diameter over bed 400 mm Max. swing diameter over cross slide 225 mm Cross travel 260 mm Longitudinal travel 660 mm Spindle head DIN Size 140 h5 Spindle bore 68 mm Speed range 25 – 4000 rpm Feed rate range, longitudinal and cross 0.5 – 5000 mm/min Rapid traverse, longitudinal and cross 9 m/min Tailstock taper MK 4 Tailstock quill travel 100 mm Main drive 22 kW Dimensions L x W x H approx. 3600 x 1720 x 1650 mm Weight 3200 kg Bodpfx Asz Icuzsf Aewu Accessories / Special features: • CNC control GILDEMEISTER EPL 2 • Electronic handwheel • RS 232 interface • Hydraulic 3-jaw chuck, diameter 200 mm • 12-station tool turret, manufacturer SAUTER, internal coolant supply, VDI 30, mounting bore Ø 30 mm, DIN 69880 • Articulated chip conveyor with coolant system • Electr. foot switch for hydraulic 3-jaw chuck and hydraulic tailstock quill • Various tool holders • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Bjdpfxjwcqw Se Af Aswu Max. mechanical speed (cycles): 30,000 cycles/h

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Bjdpfxezq Hwne Af Aowu Technical data X-axis travel 560mm Y-axis travel 410mm Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg

Condition: good (used), Year of construction: 1997, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 415 x 350 mm turning speeds 160 - 2.250 U/min column diameter 115 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1920 mm Features: - Heavy-duty column drill press - Continuously variable speed control (V-belt) Bsdpfezl E T Rox Af Ajwu - Pole-changing motor - Fixed drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - User manual (PDF)

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table width: 584 mm, table length: 1,321 mm, table load: 1,815 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details. • X-axis rapid traverse: 18.0 m/min • Y-axis rapid traverse: 18.0 m/min • Z-axis rapid traverse: 18.0 m/min • Distance spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Max spindle torque: 122.0 Nm @ 2000 rpm • Table T-slot width: 14 mm • Table T-slot pitch: 80 mm Additional equipment Bwedpfx Afsz Erwto Aju • Included documentation: Manuals and CE Declaration of Conformity Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2023, Used Machine Year of Manufacture: 2023 Condition: Like new; only a few drill holes have been made Features and Technical Specifications: - Spindle speed: 3,000 rpm Bedezk Ni Topfx Af Aswu - Drilling width: 240 mm - Max. drilling depth at 90°: 180 mm - Drill head height adjustment: 160 mm - Tool clamping range: 0–20 mm - Work table rotation: ±60° - Work table length: 565 mm - Work table width: 315 mm - Exhaust port diameter: 90 mm - Output power: 2.2 kW - Supply voltage: 400 V - Power frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: Available shortly Location: Röllbach

Condition: good (used), Used pillar drill from Bimak Model 40 Capacity 40 mm Bodpsz H Uz Djfx Af Aowu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 990 h, machine/vehicle number: Z40N08-509, load capacity: 227 kg, fuel type: electric, total length: 6,530 mm, total width: 1,500 mm, total height: 1,980 mm, working height: 14,320 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 14,320 mm Platform height: 12,320 mm Platform load capacity: 227 kg Movement: Solid rubber tires MACHINE DETAILS Bwedpfx Asz Eaflsf Aeu Fuel type: Electric Operating hours: 990 h Dimensions & Weight Dimensions (L x W x H): 6,530 x 1,500 x 1,980 mm Unladen weight: 6,908 kg EQUIPMENT Half cabin Non-marking tires User manual CE marking

Condition: used, filter Plates maximum: 100 Plate formats: 400x400 Platefilter features: Electric-Hydraulic press dimension ca. 300x60x110 cm Distance between first plate and spindle approx ca. 160cm Bwsdoz Icadepfx Af Aeu