Used Zeiss for sale (116)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: ZEISS Comet®LƎD 8M, workpiece weight (max.): 5,000 kg, workpiece length (max.): 1,000 mm, workpiece height (max.): 1,000 mm, workpiece width (max.): 1,000 mm, ZEISS Comet®LƎD 8M Cedpfjzwk Nbox Abtshb

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Codpfx Abozvrmxetehb Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured

Condition: new, functionality: fully functional, Equipment: documentation/manual, type plate available, New, unused ZEISS scanning probe set, comprising: Chedpfjzuur Iex Abtjb ZEISS VAST XXT TL3. ZEISS VAST RDS head. Compatible with ZEISS PRISMO, ACCURA, CONTURA, and current-generation CMM platforms. Condition details: New, never installed/used Complete accessory set as pictured

Condition: excellent (used), Year of construction: 2020, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 800 mm, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020. Type: CMM CONTURA 9/18/8 Chjdpfjzuzf Ijx Abtsb Year of manufacture: 2020 Operating voltage: 100–240 V Frequency: 50–60 Hz We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one. The data, taken directly from Zeiss's service log (as of June 2025): - 10,284 operating hours - 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km) - Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it - Zero significant component replacements - Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it. Probe head: VAST XT Gold Software: Calypso CNC 7.2 + QS-Stat-out Included accessories: PC, monitors, sensor rack Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories. Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary) It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use. If you have any questions or need further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 111288, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 1,200 kg, total height: 2,930 mm, type of input current: AC, total width: 1,525 mm, total length: 1,740 mm, overall weight: 3,500 kg, table width: 925 mm, table height: 720 mm, table length: 1,195 mm, table load: 1,200 kg, compressed air connection: 6 bar, ambient temperature (max.): 35 °C, ambient temperature (min.): 10 °C, Equipment: type plate available, # Advertisement Description – ZEISS MPS PRISMO 7/9/5 For sale is a used ZEISS MPS PRISMO 7/9/5 3D coordinate measuring machine. The machine was manufactured in 2000 and has the serial number 111288. It is equipped with a ZEISS VAST probing system and a multi-probe changer. # Technical Data * Manufacturer: ZEISS * Model: MPS PRISMO 7/9/5 * Series: PRISMO * Year of Manufacture: 2000 * Serial Number: 111288 * Measuring Range X-axis: 700 mm * Measuring Range Y-axis: 900 mm * Measuring Range Z-axis: 500 mm * Probing System: ZEISS VAST * Multi-probe changer included * Machine-mounted operator console included * Condition: used # Optional In addition to the machine, it is possible to purchase a separate cabinet with an extensive collection of ZEISS probes and accessories. The cabinet is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe collection can be provided upon request. # ZEISS Service and Test Label The machine has a label from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to a test performed according to DIN EN ISO 10360. The following values are indicated on the label: * MPE(E0): 1.40 + L/350 * P: 1.20 * THP: 1.40 * TAU: 29.00 * Type: PRISMO * Serial Number: 111288 Chjdpfx Aezwu Alebteb * Label: 2025-10 The stated values are reproduced according to the ZEISS label on the machine. # Condition and Inspection The machine is in used condition. An inspection is possible by prior arrangement. Subject to errors, changes, and prior sale. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200412480282, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, table width: 1,000 mm, table length: 1,600 mm, year of last overhaul: 2025, Equipment: type plate available, Coordinate measuring machine Zeiss SPECTRUM 10/16/6, year of manufacture 2004, calibrated until 2025, less than 1,000 operating hours since control replacement in 2018. Condition: good, relatively little use, minor transport damage to the granite table (not functionally relevant). Year of manufacture: 2004 (date of manufacture 12/2004) Location: West Saxony Price: on request Technical data: Manufacturer: Carl Zeiss IMT GmbH / Carl Zeiss Inc. IMT Corporation Model: SPECTRUM 10/16/6, U-STONE (granite measuring table) Part No.: 623266.9803.013 Serial No.: 200412480282 Measuring range: X 1,000 mm × Y 1,600 mm × Z 600 mm Measuring software: Zeiss Calypso, Version 6.2.12 Chedpfx Abozxgmxsteb Control: replaced in 2018 Probe head: swiveling probe system with extensions/probe holders (see photos) Design: gantry measuring machine, CNC drives Condition/Use: Operating hours since control replacement in 2018: less than 1,000 hours – very little use. Calibration performed in 2025. The granite measuring table has minor, purely optical transport damage (see photos), which is not functionally relevant. Description: For sale is a Zeiss SPECTRUM 10/16/6 coordinate measuring machine with a granite measuring table (U-STONE), year of manufacture 2004. The gantry measuring machine has a measuring range of 1,000 × 1,600 × 600 mm, a swiveling probe system with extensions, and is operated with the Zeiss Calypso measuring software (Version 6.2.12). The control system was completely replaced in 2018 – since then, less than 1,000 operating hours have been logged. The machine is in good technical condition and was calibrated in 2025. The granite table has minor, purely cosmetic transport damage that does not affect its function. Inspection and functional testing at the location in West Saxony are possible by appointment. Price: please request a quote.

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 4 kg, input voltage: 230 V, Equipment: documentation/manual, type plate available, For sale is a ZEISS GOM Scan 1 MV400, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research. Fast setup, easy operation. Condition: Like new, little used, primarily used for trade shows, exhibitions, and training. Scope of delivery: ZEISS GOM Scan 1 MV400 Original accessories according to standard configuration Power supplies and cables 10 m cable Transport case available Tripod and PC are not included in the offer and will not be provided, but can be offered separately upon request. ZEISS INSPECT OPTICAL 3D Free Open and edit new and existing projects Import of point clouds, polygon meshes Creation, editing, and processing of polygon meshes Element construction: regular geometries, points, sections, curves, surfaces, dimensions CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY Application of common alignment methods Chsdpfx Abszypzuotjb Comparison against CAD with colored deviation display Dimensional and form/position evaluations according to ISO GPS and ASME Y14.5 Report module Note: The device has only been used for demonstration, training, and presentation purposes. A new 3D acceptance certificate will be provided upon purchase. Furthermore, we would offer to take in used optical GOM or Zeiss systems in part exchange upon purchase of the Zeiss GOM Scan 1 MV400.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Including control panel, control PC, and software as shown in the pictures. EXW – self-collection on site. The purchasing company must sign a sales contract and disclose/confirm its beneficial owners. Furthermore, the signatory must complete a Postident identification. Chsdpfx Aeyam S Sobteb

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Mass Navigator VAST GOLD Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm In technically and visually like-new condition The machine was located in an air-conditioned precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation Cjdpfxszr I R Ee Abtjhb VAST GOLD sensor system 9-position probe changer magazine Reference probe Temperature probe Probe changer turret, 7 positions Calibration sphere HP Z4 workstation with monitor Calypso Basic 2022 software Options: Navigator, Curve, QDAS Converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 1 kg, Equipment: documentation/manual, type plate available, For sale is a ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research, especially when measuring components in challenging environments. Fast application, easy operation. Condition: Lightly used, primarily for trade shows, exhibitions, and training purposes. Scope of delivery: · T-Scan Hawk 2 Lite · Blue Class 2 laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS calibrated) · Sensor cable · Transport case · Incoming inspection at our facility with sphere bars according to ISO 10360 · Acceptance certificate with proof of traceability · ZEISS INSPECT OPTICAL 3D Free · Sensor driver T-SCAN Hawk 2 ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing and processing of polygon meshes · Element construction: regular geometries, points, sections, curves, surfaces, dimensions · CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · Comparison against CAD with colored deviation display · Dimensioning and form/position evaluations according to ISO GPS and ASME Y14.5 · Report module Csdpfx Abozyp Stjtohb Sensor driver T-SCAN Hawk 2 · Setup and calibration · User-guided calibration · Measurement data acquisition and project management · Configurable workflow assistant

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 Chsdpfx Aouq Nfhobtsb PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Possible services: delivery, commissioning

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine Chodpfsyzmbdex Abtsb ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: like new (used), Year of construction: 2025, ZEISS ScanBox 5110 D – Automated 3D Measuring Machine Manufacturer: Carl Zeiss GOM Metrology GmbH Model: ZEISS ScanBox 5110 D Revision: Rev. 01 Year of manufacture: 2025 Version: D / Door Codpfx Abjzypy Rstjhb Machine type: Automated optical 3D measuring machine For sale is a virtually new ZEISS ScanBox 5110 D from 2025, complete with a robot system, motorized rotary table, optical 3D measuring system, ATOS Plus 45M photogrammetry, high-performance workstation, and extensive accessories. Measurement and component data: Max. component size: Ø 1,000 mm Max. component height: 2,000 mm Max. component weight: 2,000 kg Door opening width: approx. 950 mm Sensor compatibility: ATOS 5 for Airfoil / ATOS 5 ATOS Plus 45M: 45-megapixel GigE CMOS camera Image field: 1,000 × 667 mm² or 2,000 × 1,333 mm² Dual-reflector LED flash illumination Integrated controller Software: ZEISS INSPECT Optical 3D – Pro VMR – Virtual Measuring Room CAD import / CAD nominal-actual comparison Form and position evaluation according to ISO GPS / ASME Y14.5 Automated measurement sequences and reporting Robot simulation and offline teaching Smart Teach / path optimization Automatic collision detection Direct robot control Image processing computer: 7875.L Workstation AMD Ryzen Threadripper PRO, 32-Core / 4.0 GHz 256 GB RAM NVIDIA RTX 4000 Ada, 20 GB GDDR6 2 TB SSD Windows 11 64 Bit GOM memory expansion: 10 TB RAID1 Electrical data: 371–418 V AC / 50–60 Hz / 3-phase / 16 A Connected load: 6.4 kVA Dimensions / Transport data: W × D × H: approx. 2,200 × 2,850 × 3,050 mm Machine weight: 2,635 kg Shipping / special transport Equipment: Robot system, motorized rotary table, safety / measuring cell, ATOS Plus 45M, 7875.L workstation, 10 TB RAID1, operator station, measuring / inspection accessories, Transport / accessory case and documentation as shown in the pictures. Condition: Used – Year of manufacture 2025 Virtually new, very well-maintained optical condition as shown in the pictures. Scope of supply: ZEISS ScanBox 5110 D complete system with robot system, measuring technology, computer, memory expansion, accessories and documentation as shown in the pictures. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, • Used device with upgraded cathode systems o LAB6 cathode o Tungsten cathode • EDX (Energy Dispersive X-ray Spectroscopy) allowing direct chemical analysis in the SEM • Lens-mounted 5-channel BSD • Infrared camera mounted on the chamber door • Maintenance by manufacturer (Zeiss and Oxford Instruments) until 2024 • 2x 19” flat screen monitors • Joystick controller for stage movement • Ergonomically designed control console • Software module for automatic centering of any image detail • Stage base plate, motorized X+Y axes • Stage assembly includes tilt, rotation, and Z-axis; removable Accessories • Transport lock and transport castors • 2x Wehnelt + anode + 3 tungsten filaments • Table spacers (3 pieces, different heights) + tools • 1x 9-position sample holder for rods o Collimator shorts 150 o Collimator long etc. 150 o Collimator long 50/80 mm² MK2 • 1x fixed aperture holder • 2x 100 μ VP – aperture • 1x 750 μ VP – aperture • 2x 20 μ aperture • 1x 30 μ aperture Cjdpfxey Ep S Rj Abtshb • 1x 100 μ aperture • Various tools (tool kit) and sealing rings • 1x Lens-mounted 5-channel BSD (1 EVO BSD DIODE 5 CH Standard, low light sensitivity. With signs of use, possibly for replacement) AZtec Adv Rec. 3.2 + Update 2024

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200008301032, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 350 mm, table width: 680 mm, table length: 855 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Measuring range, X-axis: 400 mm Measuring range, Y-axis: 500 mm Measuring range, Z-axis: 350 mm Maximum workpiece weight: 280 kg Table width: 680 mm Table length: 855 mm Chodpfozu Ixuox Abtsb MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,100 x 1,100 mm Total weight: 500 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SK02UXKP0579, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, overall weight: 1 kg, repeat accuracy: 0.02 mm, Equipment: documentation/manual, ZEISS T-SCAN hawk metrology laser 3D scanner with accuracy 0,02mm + 0,035mm/m with 3 scanning modes (Standard - 7 red crosses, Fine - 5 blue lines, Single red line for deep holes). Manufacturing year 2022. Fully functional and ready to use. Included: 3D scanner Calibration panel Powerful Dell mobile workstation still under Dell Pro Support Warranty Software GOM/ZEISS Inspect 2021 licence on USB drive Rigid travel case Laptop bag All original documentation included Inspection under working conditions possible. ZEISS INSPECT 2021: • Opening and editing new and existing projects • Import of point clouds and polygon meshes • Creation, editing, and processing of polygon meshes • Construction of elements: basic geometries, points, sections, curves, surfaces, dimensions • Import of CAD data in standard formats: IGES, VDA, STEP, JT Open, STL, PLY • Use of common alignment methods • CAD comparison with color deviation mapping • Dimensioning and evaluation of form/position according to ISO GPS and ASME Y14.5 Chjdpjyxy Sdofx Abteb • Reporting module Delivery

Condition: used, Year of construction: 2006, X-axis: 1600mm, y-axis: 1800mm, z-axis: 1000mm, max. workpiece weight: 3.5t, noise level: less than 70dBA, compressed air connection: 6-8bar, connected load: 2500VA, control: CALYPSO 7.6.08 software, length: 2940mm, width: 2450mm, height: 3800mm, weight: 8.5t, operating hours: 38,996h, with documentation. An on-site inspection is possible. Cedpfxezuz Aas Abtjhb

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo 9/15/7 MASS VAST GOLD - RDS+VAST XXT Year of manufacture: 2004 Retrofit 2024, last calibration 01/2025 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition. Chedpfx Abjzk Id Aotsb Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system RDS sensor system with VAST XXT Probe changer magazine MSR 10-position VAST Gold Probe changer magazine 3-position VAST XXT Probe changer plate 8x VAST Gold Probe changer plate 3x VAST XXT Reference probe Temperature probe Probe accessories Calibration sphere HP Z4 workstation WIN11 with monitor Calypso Basic 2024 software Curve and QS-Stat options Calypso upgrade and other options possible Further accessories and options possible Available for short-term delivery.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: Ser. Nr. 151041, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Multisensor Coordinate Measuring Machine O-Inspect O-Inspect O-I 442 Measuring range: X = 400 mm, Y = 400 mm, Z = 200 mm Chodpozg Ef Njfx Abtjb Length measuring deviation according to ISO 10360-2 with VAST XXT: MPE_E = (1.9 + L/250) µm, MPE_P = 1.9 µm Scanning performance according to ISO 10360-4 with VAST XXT: MPE_THP = 3.5 µm in 68 s Length measuring deviation according to VDI/VDE 2617 Sheet 6.1 for Discovery Zoom objective: MPE_E2D(OT) = (1.9 + L/250) µm Permissible temperature range for specifications: 19–21 °C Machine features, equipment:  Gantry-type measuring machine with a moving machine table  Table height approx. 850 mm  Path measuring system, 0.1 µm resolution  Integrated vibration damping  PC-based scanning control (ISC) integrated  Prepared for optical camera system Discovery Zoom sensor and tactile scanning probe VAST XXT TL1  Integrated through-light system  Numerical control panel, standard with rotatable tray  Calibration sphere D = 25 mm  Calibration ring  Regularly calibrated by ZEISS  Last calibration: April 2025  Complete calibration history available  Comprehensive accessory package including VAST XXT TL1, Discovery Zoom sensor, RT-OI Horizontal Complete, grid plate, glass frame, and Calypso software  Original ZEISS documentation available The machine has been regularly calibrated and inspected by ZEISS. Corresponding calibration protocols are available. Calibrations performed:  October 2009  November 2011  November 2013  January 2015  January 2016  January 2017  January 2018  February 2019  January 2020  March 2022  April 2023  April 2025 Note: The regular calibrations by ZEISS document the continuous maintenance and proper operation of the measuring system. The corresponding calibration protocols can be made available for review upon serious purchase interest.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 100 kg, total width: 320 mm, total length: 640 mm, total height: 540 mm, Axioplan 2 Imaging, a universal all-in-one solution adaptable to any application. A flexible, future-oriented microscope system, controllable via computer or manually, capable of digital image capture and storage, and able to communicate with other systems – truly a digital microscope from A to Z. Eight filter positions with a full 25 mm field of view, easily accessible in a compact reflector turret: This means top performance without compromise and offers space for a wide range of filter combinations, Optovar modules, multi-channel fluorescence, and a DIC analyzer. Includes attachment for the AXIOPLAN photomicroscope. Chedpfx Aoytr Acjbteb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo 9/15/7 VAST GOLD Year of manufacture: 2000 Retrofit 2024, last DAkkS calibration 12/2021 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition Device features, equipment: C99 control system with BP26 operating panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine MSR, 10-position VAST Probe changer plate, 8x VAST Reference probe Temperature probe Chodszq U Rcspfx Abtsb Probe accessories Calibration sphere HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software Options: Curve and QS-Stat Calypso upgrade and other options possible Further accessories and options available Available for immediate delivery

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo VAST GOLD Year of manufacture: 2001 Retrofit in 2024 and 2026, last calibration 11/2023 Measuring range: X = 900 mm, Y = 1800 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: C99 control system with control panel Automatic temperature compensation VAST GOLD sensor Probe changer magazine, 17-position Probe changer, 20 positions Probe accessories Calibration sphere Chjdpfx Aezkhzhjbtjb Reference probe HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software QS-Stat option Calypso upgrade and other options available Further accessories and options possible Available on short notice

Condition: used, functionality: unexamined, Equipment: lighting, Used ZEISS AXIO Zoom V16 microscope servo-controlled setup. Microscope inspection setup consisting of AXIO microscope and camera (Zoom V16), and ZEISS control system with servo-driven XYZ positioning and lens. Manufacturer: ZEISS | AXIO Models: AXIO Zoom V16, ICc5 camera | Zeiss EMS 3 controller, CL 9000 LED microscope lighting, SYCOP3, MA-R-C Cjdpfjyybkwex Abtshb Voltage: 4x 220-230V (50/60Hz) Includes computer with installed software, monitor, mouse, keyboard. Frame made of aluminium and stainless steel.

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, type of input current: AC, input voltage: 220 V, Zeiss CONTURA CMM ( As good as NEW ) !!! Quick sale price Csdpszwuk Aefx Abtehb

Condition: like new (used), Year of construction: 2013, measuring range X-axis: 1,600 mm, measuring range Y-axis: 4,200 mm, measuring range Z-axis: 1,500 mm, workpiece weight (max.): 5,000 kg, Equipment: type plate available, CARL ZEISS CNC coordinate measuring machine ACCURA II MASS 16/42/15 Year of manufacture: 2013, Overhauled: 2025 Measuring range: X = 1600 mm, Y = 4200 mm, Z = 1500 mm Control system: C99 SR VII Control panel: BP26_SE Sensor: VAST XT GOLD and RDS-CAA with VAST XXT Probe changing magazine: Multi Sensor Rack MSR Automatic temperature compensation Accuracy: VAST XT GOLD / RDS-CAA XXT MPE-E 3.6+L/300 4.9+L/200 R0 2.4 5.5 MPE-P 3.6 4.9 MPE-THP 3.7/68sec 4.7/68sec RONt 3.5 5.5 Chedpfx Aoydnzcsbtsb HP Z4 WIN11 workstation with 27" monitor Calypso Basic, current version Any further option possible Accessories: Calibration sphere Exchangeable probe tips XT and XXT Exchangeable magazine slots Probe accessories Documentation Further accessories