Used Leunig Eps 4G for sale (705)

Condition: used, mileage: 4,40,000 km, power: 320 kW (435.08 HP), first registration: 02/2010, fuel type: diesel, overall weight: 26,500 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, color: green, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), MERCEDES-BENZ ACTROS 2644 6X4 THREE-SIDED DUMP TRUCK WITH HIAB CRANE, 10 M LONG? EPS GEARBOX? WITH CONTAINER? VEHICLE HISTORY ? GERMAN VEHICLE ? FROM FIRST OWNER ? VIDEO AVAILABLE UPON REQUEST ? IMMEDIATELY READY FOR USE VEHICLE EQUIPMENT ? BLUETEC 5 ? THREE-SIDED DUMP TRUCK ? 6X4 DRIVE ? SEMI-AUTOMATIC WITH EPS GEARBOX ? ENGINE BRAKE ? CRUISE CONTROL ? AIR CONDITIONING ? DIFFERENTIAL LOCK ? HILL START ASSIST ? MULTILIFT WITH ROLLER SYSTEM ? WINCH ? CONTAINER BODY ? REAR DOORS ? TRAILER COUPLING ? LEAF SPRING SUSPENSION Hjdpfey Tf Uaox Akzen CRANE ? HIAB SPACE 4000 ? CRANE TYPE: 122 BS-3 ? YEAR OF MANUFACTURE: 2009 ? OUTREACH: 10 M ? MAX. LIFTING CAPACITY: 4.6 TONS AT 2.6 M ? HYDRAULIC CONNECTIONS ? ADDITIONAL CONNECTIONS FOR GRABS ? SUITABLE FOR GRAB OPERATION ADDITIONAL INFORMATION ? WHEELBASE: 3.50 M ? TIRE SIZE: 385/65 R22.5 ? TIRES ON ALL 3 AXLES ARE THE SAME ? TIRES IN GOOD CONDITION ? VEHICLE AVAILABLE IMMEDIATELY ? PERMISSIBLE TOTAL WEIGHT: 26,000 KG ---- EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2,000 € EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2,000 € EXPORT REGISTRATION POSSIBLE IN 10 MINUTES (AUTHORIZED EXPORTER). VEHICLE RESERVATIONS SHOULD ONLY BE MADE IN WRITING. VERBAL AGREEMENTS ARE NOT BINDING. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE. LEGAL NOTICE THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER IN THE SENSE OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT SERVES SOLELY TO INITIATE A CONTRACT. ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY SUBJECT TO OUR GENERAL TERMS AND CONDITIONS.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 330, rotational speed (max.): 2,900 rpm, motor model: 5,5kW, STYROFOAM/STYRODUR GRINDER KP2 5.5 kW three-phase 400V electric motor Hedpjy Nantjfx Akzsn Circuit breaker 1:0, power cord, 5-pin 16A plug 500 mm diameter grinding drum with hopper feed two granulate outlets with rubber clamps single-direction rotary knife with double blades 13 mm diameter screens positioned around the grinding drum operating capacity min. 4 m³/h The crusher allows the resulting granules to be bagged directly into bags or plastic sleeves, which are secured to the outlets using elastic rubber straps. All our shredders come with complete technical documentation (DTR), CE certification, and professional operating instructions

Condition: used, Year of construction: 2021, - Brand: EP - Type : CPD20L2 - Year of construction: 2021 - Hours : 986 hours - Drive: Electric / Lithium - Lifting capacity: 2000 kg. - Lifting height: 4800 mm. - Clearance height: 2200 mm. - Sideshift - Freelift - Neat and tidy forklift - Lithium battery pack - Battery charger - Video on our website - Trade-in and transport possible * Brand: EP *Type: CPD20L2 * Construction year: 2021 * Hours: 986 uur * Drive: Electro / Lithium * Lifting capacity: 2000 kg. * Lifting height: 4800 mm. * Clearance height: 2200mm. Video on website: Yes Hjdpfx Aey Ti Nbjkzen

Condition: used, mileage: 6,70,000 km, power: 320 kW (435.08 HP), first registration: 02/2011, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: semi-automatic, emission class: euro5, Equipment: ABS, air conditioning, all wheel drive, Actros 2644 First registration: km 6X4 Short wheelbase 3300 mm Leaf/air suspension Retarder German vehicle from 1st owner Hjdpfxey Rg T Ej Akzon Heavy-duty axles - BIG AXLE EPS - 3 pedal system ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We are happy to assist you with financing or leasing EU sale: net price upon presentation of company documents and VAT number VAT deposit €2,000 Our service for you: - customs plates - export documents and EUR1 - worldwide transport - accommodation options - transfer from Munich Airport or Passau train station

Condition: used, mileage: 6,70,000 km, power: 320 kW (435.08 HP), first registration: 02/2011, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: semi-automatic, emission class: euro5, Equipment: ABS, air conditioning, all wheel drive, Actros 2644 !!!! ONLY CHASSIS !!!! First registration: km Hodpfxsy Rg T Se Akzsn 6X4 Wheelbase: 3300 mm Suspension: leaf/air front leaf - rear air Retarder German vehicle from first owner German truck Big axles EPS - 3 pedal ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We are happy to assist you with financing or leasing. Export within EU: net price upon presentation of company documents and VAT number VAT deposit €2000 Our service for you: - Temporary/export license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2015-26004, power: 5.5 kW (7.48 HP), 1.3 Fine Crusher System FB 1000 DS1 Fine Crusher FB 1000 DS1 FG3 Drive power: 5.5 kW + 3.0 kW Design: 1 x cutting roller with spike discs (upper) 1 x dosing roller with spike discs (lower) Maximum processable panel thickness: approx. 100 mm Maximum processable density: 50 g/liter Clear width: 1000 mm Infeed height from conveyor belt: 180 mm Additional protective cover on conveyor belt (site-installed) Screw conveyor discharge for Fine Crusher FB 1000 DS1: Drive power: 0.75 kW Intake nozzle: NW 200 mm Hsdpeyvfhwefx Akzon Incl. maintenance hatch with safety switch

Condition: used, mileage: 4,70,000 km, power: 320 kW (435.08 HP), first registration: 10/2012, fuel type: diesel, overall weight: 32,000 kg, emission class: euro5, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, all wheel drive, Actros 3544 First registration: 10/2012 470,000 km 8X4 Leaf/Leaf suspension 35-ton chassis Euro 5 German vehicle EPS with clutch Meiller tipper !!!!! BORDMATIK !!!!! Phone: We are happy to assist you with financing or leasing EU sale: net price upon presentation of company documents and VAT number VAT deposit €2,000 We speak English. We speak Serbo-Croatian. Our services for you: - Export license plates Hjdoxxggrjpfx Akzsn - Export documents and EUR1 - Worldwide transport - Overnight accommodation options - Transfer from Munich Airport or Passau train station Phone:

Condition: used, mileage: 4,70,000 km, power: 320 kW (435.08 HP), first registration: 10/2012, fuel type: diesel, overall weight: 32,000 kg, emission class: euro5, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, all wheel drive, Actros 3544 First registration: 10/2012 470,000 km 8X4 Leaf/Leaf suspension 35-ton chassis Euro 5 German vehicle EPS with clutch Meiller tipper !!!!! BORDMATIK !!!!! Phone: We are happy to assist you with financing or leasing EU sale: net price upon presentation of company documents and VAT number VAT deposit €2,000 We speak English. We speak Serbo-Croatian. Our services for you: - Export license plates - Export documents and EUR1 - Worldwide transport Hodpfx Akexxggxozsn - Overnight accommodation options - Transfer from Munich Airport or Passau train station Phone:

Condition: used, mileage: 3,89,000 km, power: 300 kW (407.89 HP), first registration: 11/2006, fuel type: diesel, overall weight: 26,000 kg, Equipment: air conditioning, all wheel drive, Actros 2641 Hodpsy Hzh Aefx Akzen First registration: 11/2006 389,000 km 6x4 Leaf spring/air suspension - front, steel-backed air bellows EPS - 3-pedal system German truck Delivery to port... Hamburg/Antwerp/Rotterdam/Amsterdam... Please visit our website:

Condition: good (used), CRUSHER / GRINDER / SHREDDER / MILL for polystyrene (EPS) waste. Power: 15kW The unit comes with an automatic control cabinet. It is prepared (has outputs) for a mill, a fan, and a conveyor belt. It has both manual and automatic functions. In automatic mode, it regulates the material feed by itself. The machine has been designed to prevent motor overload (“clogging” or “stalling”): Load monitoring: The system continuously measures the mill’s current draw (amperage). Automatic stop: When too much material is fed and the current rises above the set limit, the conveyor belt feeder stops automatically. Hsdpeumk Nmsfx Akzsn Automatic restart: Once the mill processes the accumulated material and the load decreases, the system automatically restarts the feeder to supply the next batch of material. Tag: EPS, crusher, grinder, foam shredder, mill, polystyrene recycling machine, foam crusher, compactor, foam densifier, volume reducer.

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. Hedpfegd Uifex Akzsn ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: used, functionality: fully functional, mileage: 2,84,891 km, power: 320 kW (435.08 HP), first registration: 11/1987, fuel type: diesel, empty load weight: 10,960 kg, maximum load weight: 10,750 kg, overall weight: 21,710 kg, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,500 mm, next inspection (TÜV): 12/2026, fuel: diesel, fuel tank capacity: 300 l, color: red, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, total length: 8,550 mm, total width: 2,470 mm, total height: 3,400 mm, loading space volume: 16 m³, loading space length: 5,700 mm, Year of construction: 1987, Equipment: ABS, additional headlights, compressor, differential lock, fog lights, power assisted steering, retarder, seat heater, soot filter, trailer coupling, Model: MERCEDES BENZ SK 2244 V8 EPS 6x2/6x4 Robson Pump 2xTank 10 cubic foam tank First registration: 03/11/1987 Mileage: 284,891 km (original) Engine power: 320 kW (435 HP) Water tank capacity: 9.00 m³ Foam tank capacity: 1.00 m³ Water cannon Equipped with ROBSON Drive, switchable to 6x4 drive EPS Hsdpfey D Rwujx Akzsn 3 pedals Auxiliary heater Antennas Radio/Cassette/CD/MP3 Air conditioning Adjustable exterior mirrors Sun visor Work lights Fog lights High beam Hazard warning lights Tow hitch Transmission: Manual gearbox Tank: Diesel (300 liters) Drive configuration: 6x2/6x4 Robson Drive Differential lock Wheelbase between axles 1 and 2: 4,500 mm Wheelbase between axles 2 and 3: 1,350 mm Tire size axle 1 (front): 315/80R22.5 Tire size axle 2 (rear): 315/80R22.5 Tire size axle 3 (rear): 315/80R22.5 Leaf suspension front/rear Wheel arch covers Curb weight: 10,960 kg Payload: 10,750 kg Permissible total weight: 21,710 kg Vehicle overall dimensions (L x H x W): 855 cm x 340 cm x 247 cm Superstructure dimensions (cargo length): 5.70 m With new TÜV and AU upon agreement, extra charge applies! You can also contact us for further information and pictures via WhatsApp, Telegram, Viber, and Signal. We speak German and English, but feel free to send us a message in your language! Trade-in possible! Price is net!!! We can deliver your vehicle directly to the port of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates available on request! We support you with export, original data confirmation for country homologation, supplier declaration, preparation of export documents and customs plates production if required. Viewing and test drive possible at any time, including weekends, by prior phone arrangement! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and equipment of the goods/vehicles. All information is provided without guarantee. Subject to changes, prior sale, and errors.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz Hjdjw Ryt Depfx Akzon - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: used, Press height 140 mm Hodpfsyvgm Ajx Akzen Press force 70 kN (7 t) Hydropneumatic drive Compressed air connection 7 bar Air consumption per operating cycle 35 l Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump Hjdpfxjyw Tmlj Akzjn 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Year of construction: 1993, condition: ready for operation (used), This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine. Machine Benefits Hsdpsx Nr Ncjfx Akzsn Technical Machine Benefits • Comprehensive set of welding and cutting machines, compressors, handling, and assembly equipment. • Includes a range of machine types such as cutting machines, milling machines, saws, compressors, and various handling and assembly equipment. • Ideal for large-scale manufacturing operations due to the variety and capacity of equipment. • The equipment list includes machines built between 1989 and 2014. Extra Information Includes diverse equipment such as plasterers, drills, screwdrivers, extractors, tables, sorting carts, shelving, and cabinets, enhancing flexibility and operational capability.

Condition: good (used), Year of construction: 2004, operating hours: 18,000 h, EPS block molding machine: Erlenbach Y2004 EBV 3080x1040x1040, price €77,000. Automatic operation, automatic weighing, with mixing of fresh and recycled material. Reliable, in daily use with 18,000 operating hours. Hodpfeyuuvnex Akzen

Condition: good (used), Year of construction: 2008, operating hours: 18,000 h, functionality: fully functional, EPS Erlenbach Pre-expander EVD 1000 Batch EPS foam pre-expander unit with automatic weighing system and fluidized bed. Regularly maintained, currently operational, and in daily use. Year of manufacture: 2008 Hsdsyuudfjpfx Akzsn

Condition: like new (used), Year of construction: 2021, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: VIRO HV Q-4, inner dimension height: 1,300 mm, inner dimension width: 1,100 mm, pipe length (max.): 4,010 mm, Complete EPS Production Line for block cutting and packaging, Model: VIRO HV Q-4, Year: 2021, Price: €459,000 Includes extractor, side scrap handling unit, packaging system, bale-marking unit, stacking, and a separate dust compactor. Equipped with weight measuring unit, automatic block tipper, automatic cutting wire adjustment, and manual unloading. Designed for producing bales with a sheet size of 50x100 cm, with color marking of bales, as well as for forming stacks—semi-automatic equipment group. Suitable for handling blocks 3-4 meters in length. In daily use, 5,000 operating hours. Like new condition. EPS Block Moulding Machine: Erlenbach Y2004 EBV 3080x1040x1040, Price: €77,000 EPS block production unit, fully automatic operation, can mix virgin and recycled material. Reliable, in daily use, 18,000 operating hours. Hedpfx Asyucyuekzon EPS Pre-Expander: Year 2008, Erlenbach Pre-expander EVD 1000, Price: €42,500 Batch pre-expander with automatic weighing system and fluid bed. Reliable, in daily use, 18,000 operating hours. Steam Boiler: Year 2008, Manufacturer VASFA Kft Szolnok, Type AKH 1/12 EU, Price: €51,000 1 t/h, 660 kW Operating pressure: 12 bar Tested pressure: 19.4 bar Reliable, in daily use, 18,000 operating hours.

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Hodpov Hm A Tefx Akzsn Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Year of construction: 1999, condition: used, Technical Data Connection Data Power supply: 380 V Drive: three-phase motor, 0.75 kW, with electronic brake Hjdpfoxcuqaox Akzsn Processable cables Cross-section: up to 6 mm Motor speed: 1420 rpm, fixed Pressing force: 20 kN Stroke length: 40 mm Stroke time: 0.3 s Top dead center (TDC) infinitely adjustable Variable bottom dead center (BDC)

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Hsdpfx Akswf Dvajzjn Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: Hsdpfxeft S Eas Akzsn 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Technical Data - Siemens control system - Max. material size: 1500 x 1250 mm Hjdpfx Aksxlzqfszjn - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features - Top heater with 5-zone HTS control (700ºC) - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding Hodpfxexlzrce Akzon - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width