Used Lorch 1200 for sale (5,052)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Ljdez Eht Dspfx Ab Uert Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications

Condition: used, Year of construction: 2015, functionality: fully functional, load capacity: 20 kg, arm reach: 1,200 mm, controller manufacturer: Siemens, teach pendant manufacturer: Siemens, Offered is a delta robot including frame and enclosure from Autonox. The robot was used as a trade fair exhibit. Fully functional including accessories. 1. Delta robot RL3-TS1-1200-20kg 2. Reach: 1200 mm 3. Payload: 20 kg 4. Including drive technology from Siemens 5. Including Siemens operator device Lrsdpfx Abjxdnkvs Uot 6. Including control cabinet 7. Including stainless steel frame 8. Including gripper Video of the trade fair application: youtube.com/shorts/mQa4nFcTp84?feature=share Price negotiable Inspection possible in 45659 Recklinghausen.

Condition: refurbished (used), Stable arc – for DC and AC. The V 27 is available in all power versions as a DC and AC/DC model. The V 27 is fundamentally characterized by a very stable arc. When welding with AC, the current waveform is optimized for both excellent cleaning of the aluminum oxide layer and reduced noise. Additionally, the AC/DC version features an arc spot function. Thanks to the rectangular current waveform, the V 27 excels with increased power and maximum arc stability when welding aluminum. Robust and safe: the V 27 housing. The high-end technology inside the V 27 is protected by a robust industrial housing made of metal – ideal for outdoor use. In addition, the fully load-bearing handles allow the power source to be suspended from a crane and also serve as a holder for the hose pack. The double gas cylinder securing system ensures a maximum level of safety in the production environment. Pulsing and fast pulsing up to 20 kHz. The integrated pulsing and fast pulsing function up to 20 kHz is particularly well suited for processing thin sheet metal. It also enables excellent weld pool control and guarantees perfect results – even with difficult welding tasks. Energy efficiency at full performance. The integrated standby function ensures the automatic switching on and off of individual components. Thermocontrol sensors monitor the temperature of the system and control the fan as needed. This reduces fan noise and dust levels inside the machine and also saves energy. Optimal parameters with SmartBase. Thanks to SmartBase technology, the arc is always perfectly matched to the electrode you have selected. Welding parameters, arc starting, and working range are automatically adjusted to the ideal settings. For optimal freedom, you can fine-tune the arc individually. This guarantees that you weld with the optimal arc for your needs. Technical data TIG welding Welding range 3~ 400 V:[A] 3 - 270 TIG duty cycle AC 400 V Duty cycle AC 100% (40°c):[A] 250 Duty cycle AC 60% (40°c):[A] 270 Duty cycle AC max. welding current (40°c):[%] 60 TIG duty cycle DC 400 V Duty cycle DC 100% (40°c):[A] 250 Duty cycle DC 60% (40°c):[A] 270 Duty cycle DC max. welding current (40°c):[%] 60 Electrode welding Welding range 400 V:[A] 20 - 220 Weldable electrodes:[Ø in mm] 1.5 - 4 Electrode duty cycle Duty cycle max. welding current (40°c):[%] 80 Process-independent data Open-circuit voltage:[V] 43 - 96 Power supply 400 V Power supply voltage 3~ (50/60 Hz):[V] 400 Power supply fuse 3~ (50/60 Hz):[A] 16 Lsdpfxjzibw Te Ab Uort Positive power supply tolerance 3~ (50/60 Hz):[%] 15 Negative power supply tolerance 3~ (50/60 Hz):[%] 15 Power plug Power plug: CEE 16 Standards and approvals Protection class: IP23S Insulation class: F Standard/Norm: EN 60974-01 Labeling/Certification: CE, S Cooling type Cooling type: Gas-cooled, Water-cooled Cooling Standard cooling capacity (l/min):[kW] 1.1 Tank capacity:[l] 4.3 Dimensions Dimensions (LxWxH):[mm] 1.130 × 450 × 815 Weights Weight:[kg] 92 Weight water cooling (filled):[kg] 14.7

Condition: good (used), Year of construction: 2007, functionality: fully functional, • Manufacturer: PAK-PROJEKT (Vrnjačka Banja, Serbia) • Machine type: RS-1200 • Serial number: 02 • Year of manufacture: 2007 • Application: Machine for individual cardboard packaging • Cutting cardboard sheets to size. • Scoring, i.e., creating creases to facilitate the bending of the cardboard. • Cutting corners and slits necessary for assembling the box. The machine is in fully working order. Lodpfx Abjzvdf He Usrt Output quantity depends on the size of the cardboard box – 250-800 pieces/hour.

Condition: used, functionality: fully functional, total width: 966 mm, total length: 1,184 mm, total height: 1,322 mm, empty load weight: 200 kg, input voltage: 380 V, Vertical forming machine Dough weight range: 50 to 1,200 g Maximum output: 1,200 pieces/hour 3 PETP rolling rollers Rolling adjustment via a lever Elongation adjustment via a lever Side controls on the right-hand side Lucoflex scraper blade Wool or synthetic elongation belt Quick belt change Emergency stop Mobile base with casters Power: 0.75 kW Dimensions: 966 x 1184 x 714/1322 h Weight: 200 kg Used JAC UNIC forming machine – 50 to 1200 g A vertical forming machine for dough processing The JAC UNIC is a vertical forming machine designed for professional bakers to laminate and elongate dough pieces. This configuration allows the various forming steps to be combined in a compact machine, suitable for the organization of a professional bakery. The documentation for the UNIC range indicates a working range of 50 to 1,200 g. The machine uses 3 food-grade PETP rolling rollers to gradually prepare the dough before it passes through the elongation zone. This principle is particularly suitable for forming baguettes, long loaves, and various bread formats. Ledpfxjz Eh Afe Ab Ujrt Why this JAC UNIC stands out The main advantage of this forming machine lies in its vertical architecture and the separation of the rolling and elongation adjustments. The large side levers allow the operator to mechanically adjust the dough processing to suit the desired product. In the model presented, the controls are located on the right-hand side. The machine also has a front chute and rests on a mobile base equipped with casters. This arrangement facilitates its positioning in the bakery while maintaining direct access to the adjustments.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Speed (max.): 60 rpm Ljdpfx Abszmf Rlo Usrt Dimensions (W x D x H): 1,775 x 1,720 x 950 mm Power: 7.5 kW Power consumption: 9,400 W Connection voltage: 3 x 400 V, 50/60 Hz Weight (kg): approx. 2,800 kg Suitable lapping ring, inner diameter: Ø 480 mm Cooling: no Fuse rating: 25 A, slow-blow Volume of lapping compound waste tank: 12 l Suitable lapping disc size: Ø 1,200 mm / 47" Number of roll yokes: 3

Year of construction: 2002, condition: good (used), machine/vehicle number: 3298, Offer 26206 Twin-chamber blasting cabinet with material recovery and dust extraction Technical data: - 2 blasting chambers - Blasting chamber width / blasting chamber depth: 600 / 940 mm each - Workpiece access via side doors - 2 hinged viewing windows: 400 x 250 mm Ledpfxjz Dt I Ds Ab Uert - 2 blasting guns - 2 electric foot switches - Material recovery system - Dust extraction system with cartridge filter - Power supply: 400 V / 3 kW - Pneumatic connection: 6 bar - Space requirement: approx. W 1500 x H 2200 x D 1600 mm - Weight: approx. 350 kg

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are presenting the almost brand-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Control System. HIGH CONVERSION DESCRIPTION Like New - Immediate Availability - Priced to Sell - Ready for Export Model: EyeC Proofiler 1200 DT Condition: Like New - barely used Lrjdpfxeyxfrpo Ab Ujt EyeC Proofiler 1200DT print inspection system in excellent condition, barely used and fully operational. This is a great opportunity to acquire a high-end inspection system at a significantly lower price. ✔ Print-to-Print & Print-to-File Comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing The machine is installed and can be tested. Additional photos and videos are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – ready for export ⚠️ Serious buyers only - quick decision preferred 📧 Contact now for price discussion and details ▪️ Inspection Type: Print-to-print & Print-to-file comparison ▪️ Application: Print Inspection & quality control ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line scan camera ▪️ Lighting: Integrated LED illumination system ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) ▪️ Operation: PC-Controlled System ▪️ Speed: High-speed automated inspection ▪️ Industry: Pharmaceutical, packaging, commercial printing The machine is installed and can be demonstrated upon request. If you have any questions or need further information, you can send us a message or call us. You can also reach us via email or WhatsApp.

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model TNC 620 Table Table load 1500 kg Main Drive Number of axis 4 Spindle Speed 15000 RPM Tool taper SK 40 Movement X-Axis Movement 1200 mm Z-Axis Movement 500 mm Y-Axis Movement 610 mm Tools Slots in storage 32 This 4-axis EMCO Emcomill EM 1200 was manufactured in 2021. It features a TNC 620 HEIDENHAIN control, a 15,000 rpm spindle, and a SK40 tool carrier. The machine offers X-1200, Y-610, Z-500 strokes and supports a maximum workpiece weight of 1500Kg. With 32 tools and 3300 operating hours, consider the opportunity to buy this EMCO Emcomill EM 1200 vertical machining centre. Contact us for more information. Application Types Milling Lrsdpfx Asx D Dzdsb Ujt

Condition: used, functionality: fully functional, total length: 2,400 mm, total width: 1,200 mm, Demmeler 3D welding/clamping table for sale. Main item: - Manufacturer: Demmeler - Type: 3D welding/clamping table - Approximate table size: 2400 x 1200 mm - Used condition - Condition and completeness are shown in the photos. Additional welding tables are also available and can be purchased separately or as a package: Ljdpfx Abezv N Nwj Uert - Siegmund 3D welding table 2400 x 1200 mm – EUR 4,900 - Siegmund welding table 1500 x 1000 mm – EUR 2,200 - Siegmund welding/clamping table 1000 x 500 mm – EUR 800 Package price for all 4 welding tables: EUR 11,900 EXW Estonia. Used equipment, sold as is. Individual sale or package sale can be discussed. Loading: Forklift/pallet handling capability is available on site. We can load the tables onto the buyer’s truck. Transport: Transport is at the buyer’s expense.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Cotrol system Fanuc 21iB. Probe Marposs T36. Lrjdjyk D R Tjpfx Ab Ujt X ... 1200 mm Y ... 600 mm Z ... 640 mm Table ... 1300x620 mm Max. table loading ... 800 kg Taper in spindle ... ISO 40 Spindle revolutions ... 50 - 8000 rpm Number of tools in tool changer ... 24 ks Machine dimensions ... 2001 x 3641 x 3158 mm Weight ... 7000 kg

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 with separate wire feed case Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires, steel [Ø in mm]: 0.6 - 1.6 Weldable wires, stainless steel [Ø in mm]: 0.8 - 1.2 Weldable wires, aluminium [Ø in mm]: 1 - 1.6 Weldable wires, CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Continuous MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode duty cycle Lrodpfx Aoy Ia Hmob Uot Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Mains: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulating material class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Dimensions wire feeder case (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 11,500 h, load capacity: 20,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,800 mm, fork carriage width: 2,900 mm, fork length: 2,400 mm, empty load weight: 39,000 kg, total length: 6,100 mm, drive type: Diesel, construction width: 3,050 mm, Heavy-duty forklift – Diesel Load center: 1200 Fork width: 250 mm Fork thickness: 110 mm Mast type: Duplex Transmission: Clark HR32 – overhauled in 2021 Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 14.00-24 Front tire condition: 80 – 100% Rear tire type: Pneumatic Lredpfx Aoz Ecy Eeb Uet Rear tire size: 14.00-24 Rear tire condition: 60 – 80% New: forks, lifting chains, front tires

Condition: good (used), Year of construction: 1994, large shredder, ideal for pallets or waste wood rotor width 1200 mm motor 30 kW with hydraulic pusher Ledpfx Aez D Sk Rjb Uert

Condition: ready for operation (used), Brand: HERAEUS Lodjy Nlfdspfx Ab Ujrt Maximum temperature: 1200 °C Internal furnace dimensions: 390 x 200 mm, depth: 650 mm

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. Lredpfx Ajwqcrqjb Uet - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1200-5 /0.9 + Controller + TPU DEMO ROBOT, as new DEVELOPMENT OF GSG ROBOTICS Ledpfx Abezxbndj Usrt GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, offering a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 5-048.045, filter area: 84 m², filter pressure: 15 bar, cake thickness: 30 mm, total width: 1,820 mm, total length: 5,820 mm, total height: 2,550 mm, warranty duration: 12 months, year of last overhaul: 2026, number of chambers: 40, control voltage: 24 V, Equipment: documentation/manual, safety light barrier, For sale is a fully overhauled bridge-type chamber filter press from Passavant. The pictures were taken before the overhaul. Chamber filter press – Manufacturer: Passavant with plate thickness: 76 mm, made of PP cake thickness: 30 mm volume: approx. 1160 l useful length: approx. 2800 mm dimensions: 1200x1200 mm overall dimensions: 5820x1820x2550 mm (l x w x h) tare weight: 2700 kg closed filtrate discharge plate transport: electric hydraulics: electric Please let us know if you are interested in this press. Lodpfx Aoz D Eareb Uort We will be happy to provide you with a customized offer. Price upon request.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Wendelmixer Diosna W401A - machine for 400 kg of dough - 2 speeds - control panel with program memory - 4 bowls Lrsdpfoztz E Eox Ab Ust - machine after refurbishment, in excellent condition - year of manufacture 2012 + Diosna HK1200 dough tipping device with drive and bowl scraper - complete with safety cage - year of manufacture 2020

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Lrjdpfx Ajwugczob Ujt Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Year of construction: 2019, condition: like new (used), machine/vehicle number: 1810001-01, DARTEK TAR 1200/5000 vibrating screen, designed for the efficient sorting and separation of bulk materials in industrial recycling and material processing applications. The unit is equipped with a separation system using a bar-type screen, allowing for flexible separation in multiple stages. • Type: vibrating screen system • Configuration: finger screen (bars) • Application: size-based sorting and separation of mixed bulk materials • Status: available for inspection Ljdpfx Aszcm T Uob Uort • Current condition: in industrial condition (or disassembled/stored, if applicable) The system is designed for high-capacity screening operations, allowing for efficient separation of materials according to their size and type. The finger screen is suitable for coarse separation and the handling of bulky or irregular materials. The vibrating system ensures a constant flow of material and optimal screening efficiency, reducing blockages and improving performance in demanding recycling and sorting environments. The equipment is suitable for recycling plants, quarries, and material recovery facilities where reliable and continuous screening performance is required.

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Cost of delivery Client cover startup type Lrjdjcudizspfx Ab Ujt negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: good (used), Sandblasting system, blasting system, sandblasting cabinet, sandblasting device -Manufacturer: Joisten & Kettenbaum, Sandblasting system, Sandblasting cabinet Lrodpfx Asz Dukmjb Uot -Type: 1200 -Operation: with foot pedal -Dimensions: 1400/1060/H2000 mm -Weight: 542 kg

Condition: refurbished (used), functionality: fully functional, This excellently maintained Agilent 1200 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Lredpfozy Hldox Ab Ujt Annual preventive maintenance has been performed by certified Agilent Service Engineers. The final maintenance and qualification were performed in July 2026, during which the system successfully passed the inspection (PASS). Configuration: Agilent 1200 Solvent Tray Agilent 1200 Vacuum Degasser G1322A Agilent 1200 Quaternary Pump G1311A Agilent 1200 Series Standard Autosampler G1329A Agilent 1200 Thermostatted Column Compartment G1316A with integrated switching valve Agilent 1200 Series Diode Array Detector (DAD) G1315B PC with Windows 10 Agilent ChemStation CDS software included 6-month warranty Enjoy 25% off your first service when you sign up for a maintenance contract with us.

Condition: excellent (used), Year of construction: 2013, We offer a used KROMA GUTMASTER 1200 mackerel gutting and injecting line from 2013. This industrial processing line is designed for the automatic gutting, cleaning, waste extraction, and brine injection of mackerel in fish processing plants. The machine is suitable for fish weighing 200–500 g and combines several operations in one continuous workflow. The fish is manually placed in special conveyor pockets, head-first and belly-up. As it moves through the line, the machine measures the fish and automatically adjusts the knives to its size. The system opens the belly, separates the gills, removes the entrails using the VACMASTER 200 vacuum system, cleans the inside of the fish, removes kidney blood, and then transfers the product to the brine injection section. The line is equipped with the BRINEMASTER automatic brining module, located directly after the cleaning section. A special injection head with 50 needles, each 2 mm in diameter, injects brine into the fish. After brining, the product is transported by conveyor to an inspection table or directly into containers. The KROMA GUTMASTER 1200 is made of acid-resistant materials and AISI 304 stainless steel, ensuring durability, hygiene, and resistance to demanding production environments. The machine is also equipped with CIP and CWS cleaning systems, helping to reduce cleaning time and improve sanitary working conditions. If there is no fish in a conveyor pocket, the working units are automatically deactivated, which reduces wear and energy consumption. Technical specifications: Manufacturer: KROMA Model: GUTMASTER 1200 Year of manufacture: 2013 Application: mackerel gutting, cleaning, and brine injection Fish size: 200–500 g Capacity without brine injection: up to 50 pcs/min Capacity with brine injection: up to 35 pcs/min Total power: 8 kW Control: microprocessor-based PLC Vacmaster 200: automatic vacuum gut-removal system Brinemaster: 50 needles, 2 mm diameter Outfeed conveyor: yes Ljdpfx Aszkizvob Usrt CWS cleaning system: yes CIP cleaning system: yes Basic spare parts kit: included in the price Operating staff: 2–3 people Weight: approx. 1000 kg Dimensions: 5100 / 6100 mm with conveyor x 600 x 1600 mm Main advantages: automatic gutting, cleaning, and brine injection in one line, high capacity of up to 50 fish/min without brining and up to 35 fish/min with brining, suitable for mackerel weighing 200–500 g, VACMASTER 200 vacuum system for entrail removal, BRINEMASTER brine injector with 50 needles, stainless steel and acid-resistant construction, CIP and CWS cleaning systems, PLC control, basic spare parts included in the machine price.