Used Lorenz Fmp04 Filter Test Station, 2021 for sale (23,129)

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Gjdpfxsz Ndaze Ap Dsbu Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Oil-water separator for compressor condensate Filtration: Oil filter and activated carbon filter Weight: 6.8 kg (empty)

Condition: good (used), Material testing station / final inspection comprising the following main components: Keyence XG-H500M Digital 5-million-pixel B/W camera Keyence XG-7701P Multi-camera image processing system / controller Keyence CA-DC21E Lighting controller Opto Engineering TC23096 Bi-telecentric lens Gbjdpfsg Sxmfex Ap Deu Keyence XG-H500M Digital 5-million-pixel B/W camera CCD: 2/3-inch monochrome CCD, square elements, all pixels with 11x faster readout speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), line skip (40.3 ms) Interlace is a binning process that sums the odd and even lines. Model CA-DC21E Lighting controller Type: Lighting controller, for XG/CV-5000/CV-X200/CV-X100 series only Input: Forced lighting shutdown: Input voltage max. 26.4 V, min. 2 mA Output: Light control method (1) Constant voltage control method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change controller setting] Brightness levels 255 levels digital [Change controller setting] Number of connections: 2 channels (available for LED connection and terminal block connection) Voltage: 12 VDC / 24 VDC [Setting via DIP switch] Power: Max. 40 W (30 W per channel) Synchronization: Synchronization via FLASH output / continuous lighting [Change controller setting] Response time: (1) Constant voltage control: Max. 10 ms at 12V output, Max. 20 ms at 24V output (2) Pulse width modulation method: Max. 1 ms at 12V/24V output Display: LED display Supply voltage: 24 VDC ±10 % Power consumption: 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence XG-7701P Multi-camera image processing system / controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093x, C-mount Magnification (×): 0.093 Image circle Ø (mm): 11.0 Max. detector size: 2/3" Working distance (1) (mm): 278.6 wF/# (2): 8 Typical telecentricity (max) (3) (deg): < 0.06 (0.08) Typical distortion (max) (4) (%): < 0.04 (0.08) Depth of field (5) (mm): 77 CTF @ 70 lp/mm (%): > 40 Image area of the object (6): with 1/3" detector (4.8 x 3.6 mm) (mm × mm): 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm): 61.29 x 46.02 with 1/2" detector (6.4 x 4.8 mm) (mm × mm): 68.82 x 51.61 with 1/1.8" detector (7.13 x 5.33 mm) (mm × mm): 76.67 x 57.31 with 2/3" - 5 MP detector (8.50 x 7.09 mm) (mm × mm): 91.40 x 76.24 Dimensions Mount: C Phase setting (7): Length (8) (mm): 336.6 Diameter (mm): 143 Weight (g): 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelving racks, paternoster. High-quality industrial machines, lathes, grinding machines, hand tools. Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2014, A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Godpfx Aey Eg Dysp Dobu

Condition: good (used), WSM Stationary Screw Unit, Assembly Station Assembly of components for car radios and navigation systems, as well as testing of these components. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with interlocking (locking). The doors are locked in automatic mode and can only be opened when the automatic mode is stopped or in manual mode after pressing the "Doors" button on the control panel. The automatic mode cannot be started when a door is open. Functional Sequence The station is loaded with the pre-assembled unit via the conveyor belt. The following describes the work steps of the automatic station with a process flow for a WT (test object). In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled unit in Station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the WT onto the belt - Positioning the WT with the pre-assembled unit in Station 2.2 - Positioning the screwdriver and screwing in the front PCB - Lowering the WT onto the belt - Positioning the WT with the pre-assembled unit in Station 2.3 - Lowering the light shield and making contact, moving the carrier with the test sensors from below Gjdpfx Apoibichs Debu - Type-dependent testing of the lighting of the SD + CD slots and buttons - Functional test of the CD eject button - Lowering the WT onto the belt > continue If errors occur during the test, they are displayed on the display and can be corrected if possible. To do this, switch to manual mode and open the doors. After the repair and starting the automatic mode, the WT is tested again in the station. If no repair is possible (e.g., screwing error), the WT is marked as NIO (Not In Order) in the control system and is no longer processed. Manual NIO marking and removal are also possible. More new and used assembly stations - find them in our shop! International shipping costs on request!

Condition: excellent (used), For sale is a professional measurement station, the Wentworth Laboratories MP-0900, designed for testing and performing measurements on semiconductor components, circuit boards, and microelectronics. The device is equipped with a Wild Heerbrugg Epizoom 1:5 stereoscopic microscope with smooth magnification adjustment and a precise, movable measuring table. The design also features color-coded measurement ports. Gjdpfx Aozu Tnzjp Debu Data from the nameplate: Manufacturer: Wentworth Laboratories, Inc. Model: MP-0900 Serial number: 123A Power supply: 230 V Frequency: 50 Hz Weight: approximately 34.6 kg Wild Heerbrugg microscope – manufactured in Switzerland Used condition, with normal signs of wear visible in the photos.

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Gsdpfxezc N H De Ap Dsbu Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, wheel width: 200 mm, stroke length: 230 mm, feed length X-axis: 500 mm, type of input current: three-phase, total height: 2,900 mm, table load: 2,750 kg, table diameter: 1,005 mm, overall weight: 12,000 kg, input frequency: 50 Hz, total width: 3,300 mm, total length: 3,800 mm, distance table to spindle center: 640 mm, gear diameter: 1,000 mm, distance table center to spindle nose: 640 mm, workpiece diameter (max.): 1,000 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Siemens Sinamics S120, control type: CNC control, stroke rate (min.): 15 1/min, stroke rate (max.): 510 1/min, The universal machine for gearings that cannot be milled: The Lorenz LS 1000 CNC machines internal and external toothed spur gears up to 1000 mm in diameter – hollow gears for planetary gearboxes, gear rings, couplings, gears with a flange or chamfer. Completely modernized with Siemens Sinumerik ONE, new electrical system, hydraulics and lubrication, designed for maximum performance and accuracy in flexible manufacturing. Acceptance according to DIN and manufacturer's standards with a protocol. Offered by Serwema Retrofit Solutions, Chemnitz. The LS 1000 was developed as a universal machine for construction machinery, wind turbine and machine tool gearboxes, mining technology, aerospace and textile machines, and is suitable for both single parts, small series and large series. The main application is the hobbing of straight-toothed and – with a helical guide and matching cutting wheel – helical-toothed spur gears with internal or external teeth. With software options, the machine can also process non-circular gears, grooves and cams; with special cutters, couplings as well as involute and spur gears are produced. The Sinumerik ONE with electronic gear unit guides the user through workpiece and tool data using masks, without the need for programming. Gbsdpfsz E H Rnox Ap Deu

Condition: used, Concrete sample press for concrete and material testing Flexural strength test Determination of compressive strength Gbsdpoxb Nv Uefx Ap Dju

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material analysis Testing of tensile strength, bond tensile strength, and shear strength of masonry and wood connections, etc. - Nail pull-out test - Compression test on cement and mortar prisms - Bending test on cement and mortar specimens - Compaction test - Bending test on wood and concrete - Shear strength test on wood - Splitting test on wood - Scaffolding connection test - Shear strength test on walls - Tensile test on walls Gbodpfxsxmv H Ro Ap Deu - Tensile test on structural steel - Tensile test on wood - Pull-out test on structural steel - Reversal bending test on structural steel - Anchor pull-out test - Bond tensile test I have made a video demonstrating the function of the testing machine. I can send this video to a mobile number via WhatsApp or Signal! Shipping and loading are possible at my warehouse!

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Gsdpeympx Ujfx Ap Dsbu

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames Gsdozzyd Aepfx Ap Debu * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: used, functionality: fully functional, total height: 1,100 mm, table diameter: 310 mm, overall weight: 5,000 kg, total width: 2,300 mm, total length: 1,800 mm, For sale is a gear hobbing machine as shown in the attached pictures. Manufacturer: LORENZ Max. wheel diameter: 500 mm Max. module: 5 Max. gear width: 100 mm Max. gear shaping length: 75 mm Number of strokes/min of the cutter: 45 / 424 Gedezz Ilnepfx Ap Dsbu Cutting speed: 18 Screw diameter: 78 mm Max. gear shaping diameter: 500 mm Max. external shaping diameter: 500 mm Max. internal shaping diameter: 450 mm Hole diameter of the table: 125 mm Diameter of table: 310 mm Total power: 3.0 kW Voltage: 220 / 380 V

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation Gbedsyb Tw Ropfx Ap Dsu The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, König Combiline KCL 6 / 800 mm with WK-RR and Donut station – 2022 Automatic König Combiline line for the production of small breads and shaped products, equipped with a Classic Rex Futura, a WK-RR shaping station, and an original König Donut station. Features: – Manufacturer: König – Model: Combiline KCL 6 – Year: 2022 Gbjdpoz I U Tcsfx Ap Dsu – Working width: 800 mm – Dividing and rounding head: Classic Rex Futura – Type: Futura T5/4/3S – Drums: SK51 + SK65 – Weight range: 22 to 115 g – Operation in 3 / 4 / 5 rows – Maximum capacity: up to 7,500 pieces/hour – Control via touchscreen with programmable settings Line composition: – König Classic Rex Futura, divider-rounder – Pre-elongator – Proving chamber / pre-fermentation – Shaping station with WK-RR coiler – Moistening and seeding system – Automatic depositing system – Donut cutting / stamping station The WK-RR station allows, in particular, the processing of elongated and coiled products and significantly increases the versatility of the line. The Combiline enables the production of a wide range of products: – Round small breads – Hamburger buns – Hot dog buns – Elongated small breads – Flattened products – Coiled products – Various shaped products – Donuts König Donut station: – Width: 800 mm – Bottom-side center cutting – Centering device for precise cutting – Automatic removal of cut dough – Stainless steel construction Condition: Line in very good condition and always well-maintained. It is currently still installed in a bakery in the UK and can be viewed before dismantling. Dismantling is scheduled soon, and the line will then be available in our warehouse in Belgium. Video available upon request.

Condition: used, Industrial Computer Work Station. Lockable cupboards with cable routing apertures Slide out keyboard tray Lockable and ventilated monitor housings 3 available. £490.00 each Keyboard, monitor and mouse NOT included. Gbsdpfx Apsz Iytus Deu

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine -Well-maintained machine with extensive accessories -1 pallet / Change gears -1 pallet / Hobbing cutters -1 pallet / Clamping arbors Godozv Ed Depfx Ap Dsbu DOCUMENTATION -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Errors and omissions excepted.

Condition: good (used), Hardness tester, fully functional Upon request, transport and loading can be organized throughout Europe at an additional cost. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your equipment? Gbedpfx Apszvfd Rs Dou For further information or contact options, please reach out via the contact form.

Condition: used, Year of construction: 1988, machine/vehicle number: 14411, stroke length: 220 mm, table diameter: 730 mm, For sale is a Lorenz LS 630. A robust and precise machine, renowned for its high build quality. The machine requires technical refurbishment due to the control system, but is in very good mechanical condition. It can process components up to module 12. A stable and high-quality Lorenz LS 630 that can be made fully operational again with some effort. Gbjdoxrcmbopfx Ap Deu

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Xerox Service Station’ finishing station Item for sale: 1x Xerox Service Station Gbedpfx Asz Ar D Dep Dsu Condition: This offer is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Year of construction: 2025, condition: used, Pall Emflon PFR 30” Filter - 1 of 19 available Gsdpfx Apjxv Azyo Djbu Unused and in Original Packaging Expiry date 23rd Feb 2026 hence the price Overview & Purpose - The Emflon® PFR / PFRW filter cartridges from Pall are sterilizing‑grade hydrophobic PTFE membrane filters designed for air and gas (vent & compressed gas) sterilization applications. +2 - They are used to provide a sterile barrier by removing microorganisms (bacteria, phages) and particulates from gas streams that contact sensitive process equipment or product. +2 - The filters are designed for repeated use, in situ steam sterilization, and validation / integrity testing

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 110 kg, usable tank capacity: 30 l, machine/vehicle number: DPF-995, Equipment: CE marking, TECHNOMAKS DPF-995 Professional Diesel Particulate Filter Cleaning Machine – 12V – Automatic – Test & Report Gjdpfxjz D Hrie Ap Debu Thanks to the TECHNOMAKS Mobile Diesel Particulate Filter Cleaning Machine, DPF cleaning can be easily performed on vehicles manufactured to Euro 5 and Euro 6 standards. It tests the fill level and performs cleaning without removing the diesel particulate filter. It easily removes soot and ash from vehicles through the oxygen temperature sensor and differential pressure sensors. It operates with a special cleaning fluid, water, and a generator, providing cleaning in a maximum of half an hour without removing the DPF filter. Using hydrogen-based chemicals, it dissolves soot, ash, and oil residues that have accumulated on the DPF and catalytic converter, and then removes them through the exhaust system with the help of water. After the liquid cleaning, a drying process is performed, and the cleaning process does not damage the DPF. It performs result-oriented measurement and cleaning operations on the vehicle. After the Diesel Particulate Filter Fill Level Test, the cleaning rate results can be reported on a receipt. Compared to other devices, it saves time because the DPF does not need to be removed. It offers DPF fill level testing and result-oriented operations. In terms of price/performance, it is more advantageous than other devices. In workshop use, operations can be completed quickly without the need to send vehicles elsewhere.

Condition: excellent (used), For sale: a complete set of professional measuring stations from the renowned German brand ULTRA Germany, models: • ART. 27484-032 – POS. 12 • ART. 27484-033 – POS. 10 • ART. 27484-030 – POS. 8. The devices are designed for precise positioning, inspection, and calibration of mechanical and measuring components in production and quality control processes. An ideal solution for measurement laboratories, quality departments, research centers, or tool shops requiring high repeatability and accuracy. • Construction made of high-quality steel and aluminum – robust, stable, and durable • Precision linear guides ensure smooth movement and high measurement accuracy • Height adjustment and holder locking for quick adaptation to the tested component • Capability to mount dial indicators, holders, and other measuring accessories • A reliable solution for series measurements and part positioning in production processes. Condition: used, in very good technical and visual condition – devices are fully functional, sourced from a quality control department. Price refers to Gbjdpfxexltn As Ap Dju

Condition: ready for operation (used), Year of construction: 1990, total width: 3,900 mm, total height: 3,400 mm, travel distance X-axis: 360 mm, travel distance Z-axis: 154 mm, overall weight: 9,000 kg, product length (max.): 5,300 mm, table load: 1,000 kg, number of axes: 3, This 3-axis LORENZ LS 424 shaping machine was manufactured in 1990. It features a maximum wheel diameter of 420 mm and a stroke rate of 32 - 800 strokes/min. The machine has an impressive X-travel of 360 mm and a Z-travel of 154 mm, with a maximum table load of 1000 kg. If you are looking to get high-quality shaping capabilities, consider the LORENZ LS 424 machine we have for sale. Contact us for further details. - Control Defect: Control unit reported as defective - Wheel Diameter Max.: 420 mm- Wheel Width: 120 mm- Module Max.: 8- Module Min.: 0.5- Control Unit: BWO CNC- Stroke Rate: 32 - 800 strokes/min (infinitely variable 25 - 800 strokes/min)- Total Power Requirement: 50 kW- Machine Elevation: 200 mm- X-Travel: 360 mm- Z-Travel: 154 mm- L-Travel: 137 mm- External Gear Cutting Max. Outer Diameter: 420 mm- Internal Gear Cutting Max. Inner Diameter: 370 mm- Workpiece Outer Diameter: 420 mm- Max. Stroke Length: 130 mm- Wiring Diagram: E8 Additional Equipment: Straight Guide, Leveling Feet Gbedoz Hk Iyopfx Ap Dju

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Gedpfxorfcpmj Ap Debu Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 1987, functionality: limited functionality, machine/vehicle number: 63526, overall weight: 1,200 kg, operating temperature: 220 °C, year of last overhaul: 2022, For sale: Pfaudler Balfour filtration Nutsche, volume 300 L. Glass-lined reactor, jacketed, in working condition. Sales price 24,000 Euro, ex works. Can be inspected onsite in Zofingen, Switzerland. Gbodpfjy Igzkox Ap Deu