Used Mütek Mhz 600 for sale (10,886)

Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Crodpfx Aaegl Nlme Njb Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Cedjd Nm Sispfx Aa Norb Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity Cedpfed Hkqhex Aa Nsrb The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: Csdpfxsdwktko Aa Norb - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Cjdsd Nnwlspfx Aa Njrb Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm Crodpjtqfhxefx Aa Njb For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Benefits: + Special rotor with reduced knife protrusion, suitable for hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Rate depends on screen size and material. Significantly higher throughput with smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or according to agreement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Suction connection Ø 200 mm Feed opening: 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: plant color may differ Weight: 1920 kg Crodjx Af Rdopfx Aa Neb Standard scope of delivery includes: - Control cabinet with PLC control - Automatic star-delta start - High-speed hydraulics - Auto shut-off when rotor is idle - Speed 70–90 rpm for high throughput - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at an additional cost: - Increase shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synced with shredder) - Enlarged hopper attachment 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Feed must be free from metals and mineral contaminants. Tool damage and/or increased wear may result otherwise.

Condition: as good as new (ex-display), Year of construction: 2026, Machine available at special price Crodpfx Aajfci D Ae Nob Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine Including control cabinet with timer operation The press is switched on manually and will run until the set time on the timer (e.g. 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square), Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions (approx.): 137 x 75 x 148 cm (L x W x H), Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V, 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% ATRO - Sand, stones, metals, and minerals increase wear --- Optional upgrades (at extra cost): - Timer function + €490 net Machine is started manually and switches off automatically after preset time X. - Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt version Motor then 3 kW instead of 2.2 kW Surcharge + €690 net (delivery time approx. 8 weeks) ---

Condition: new, Welding turntable KT 500, with 100 mm through-hole Horizontal load 600 KG, tilted 300 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W Table diameter 700mm Crsdpfscat H Njx Aa Njb Height 700mm, width 800mm, length 800mm Weight 155 KG Infinitely variable electric tilt range 0 - 90° Speed 0.3 - 2.5 rpm Welding current transmission max. 500 A Incl. hand remote control foot remote control Surcharge: Quick clamping jaw chuck Diameter 400mm, 550.-€ CE mark/approval

Condition: used, Welding rotary table 600 kg load capacity, electrically swivelling immediately availableModel KT 600 / 380 V Connection AC 380V frequency control Load capacity（horizontal/vertical 600Kg/300K Rated Center Of Gravity 250mm Rated Eccentricity 150mm Table diameter 1000mm Speed from 0.1 to 1.2 rpm Rotation motor 370W Cedpo Tic Refx Aa Nerb Tilt motor 550W Mass: 1200*1100*850mm

Condition: as good as new (ex-display), Year of construction: 2024, Special-purpose machine for plastics shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between rotor and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Control: PLC Cutting chamber opening at the top: 600 x 800 mm Maximum recommended input material size: approx. 500 x 500 mm (*height less critical) Hydraulically actuated pusher Screen perforation options: 25 - 40 mm For plastics, coarser screens are recommended (30-40 mm) *For finer granulation, a two-stage shredding process with downstream granulator type MVZ (screens 5-15 mm) is recommended Exhaust port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Additional options available at extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor discharge): + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm): + €8,770 net - Overbelt magnet: + €5,980 net - Conveyor and overbelt magnet control: + €2,750 net (synchronized start/stop with shredder) - Alternatively, manual start/stop function at conveyor: + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. will result in increased wear We are happy to offer a free test using your material at our facility in Neckartailfingen. Alternatively, you may send your material to us via freight forwarder and we will document the test using photos and videos. --- * Only for brittle plastics of medium hardness. Cjdpfx Aajd H R Sxe Norb * Not suitable for elastic or extremely hard and heavy plastics – this will negatively impact the durability of the system. --- Optional: Larger machine sizes available Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening at the top: 800 x 1,000 mm Maximum recommended input material size: approx. 720 x 700 mm (*height less critical) From €39,995 net (*options subject to additional cost) Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening at the top: 1,000 x 1,000 mm Maximum recommended input material size: approx. 900 x 700 mm (*height less critical) From €49,975 net (*options subject to additional cost) Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening at the top: 1,300 x 1,200 mm Maximum recommended input material size: approx. 1,200 x 700 mm (*height less critical) From €79,975 net (*options subject to additional cost)

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Crododubpuspfx Aa Njb Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Cjdpfx Aaschuvre Nerb Inspection door / opening: 35x18 cm Installation length may vary

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 600 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Crodpoi Ewqkofx Aa Nsb Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 600 mm surface: coated if necessary (two-part if necessary) 01x chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 600 mm Surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: good (used), Technical data for pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Material colour: blue Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Height: approx. 265 mm Pull-out: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Crsdpfxoww Im Hj Aa Nob Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, extra costs will apply, which can be provided upon request based on delivery location and order scope.

Year of construction: 2018, condition: new, Your contact person in our company: Lord: Andre Evering Lord: Marcel Brahms Lord: Simon Blank We offer you a new post protection from the manufacturer Mecalux for sale. The post protection is suitable for a frame profile width up to max. 120 mm. Included in the scope of delivery are: 01x Post protection, new Material color: orange f. Stand profile width: approx. 120 mm Total height: approx. 600 mm Total width: approx. 132 mm Inner width: approx. 126 mm Total depth: approx. 70 mm Re-dequalifications: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (middle-mite hole): approx. 400 mm Codpfx Aajd Rxyrs Nsrb Weight / pcs.: approx. 4,298 Kg 04x Hexagonal screw: M8 x 25 mm 04x Tooth nut: M8 04x Washers: M8 Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without unloading)

Condition: good (used), We offer here a used workbench frame for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data of the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used material color: sendz. galvanized stand height: 900 mm stand depth: 600 mm Cjdpfjhvmmtsx Aa Nsrb Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: gray box profile: 110/140 x 50 mm clear width: 1.400 mm 08x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), We offer here a used workbench frame for sale. Dimension: Crjdpfx Aaohvmnbo Nob Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data of the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used material color: sendz. galvanized stand height: 900 mm stand depth: 600 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 02x workbench crossbars, used Material color: gray box profile: 110/140 x 50 mm clear width: 1.400 mm 04x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank We offer here a used post protection of the manufacturer Gemac for sale. The mullion protection is suitable for a frame profile width of max. 90 mm. Included in the scope of delivery: 01x post protection, used Material colour: cream white Design: V f. Upright profile width: approx. 90 mm Total height: approx. 600 mm total width: approx. 113 mm height of deflector: approx. 60 mm Material thickness: approx. 4 mm Hole Ø: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight / piece: approx. 4.888 Kg 02x mounting plates, used Material colour: cream white Crodsfdqkaopfx Aa Njb Dimensions: 130 x 91 mm (WxD) Material thickness: approx. 7 mm 04x hexagon head screw: M10 x 35 mm 04x tooth nut: M10 04x washers: M10 Our services at a glance: (prices on request) Mounting, construction our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet (without unloading)

Condition: good (used), clear span: 2,700 mm, load capacity: 3,000 kg, Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Installation Technical Data: Number of racking rows: 01 piece Length per racking row: 16,900 mm Number of bays per row: 06 pieces at 2,700 mm each Number of levels plus ground level: 05 pieces Volume Technical Data: Pallet spaces per bay: 18 pieces Pallet spaces per row: 108 pieces Total pallet spaces: 108 pieces Assumed specifications: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Scope of supply includes: 07x pallet racking frames, used Material finish: sendzimir galvanized Frame type: P113 Profile dimensions: 100 x 100 x 2 mm Including horizontal and diagonal bracing, frame protectors and base plates Frames are pre-assembled (bolted truss structure) Height: 8,000 mm Depth: 1,100 mm 60x pallet racking beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Bracket: 5 HK (Hooks) Maximum load per pair of beams: 3,000 kg (uniformly distributed load) Note: The functionality of the beams is ensured despite the holes SSI project with heat dust shields that, according to the manufacturer's information, were bolted on! 120x Safety pins, used Material finish: sendzimir galvanized For securing the cross beams against unintentional lifting 28x expansion anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Design: completely galvanized For leveling the frames installed on uneven floors 01x Load sign With specifications for bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Csdpfxex Ebrpj Aa Nsrb Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to extra costs, which can be requested separately from us depending on the place of delivery and scope of delivery.

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Setup technical data: Number of rack rows: 01 pcs Length per rack row: 27,990 mm Number of compartments per rack row: 10 pcs Number of levels plus floor level: 03 pcs Volume technical data: Pallet locations per compartment: 12 pcs Pallet locations per rack row: 120 pcs Total pallet locations: 120 pcs Assumed configuration: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack frames, used Material colour: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, frame guards, and baseplates Frames are pre-assembled (bolted truss design) Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Material colour: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg (evenly distributed load) Note: The functionality of the beams is not affected by the holes; SSI project with heat-dust plates that were bolted on as per manufacturer’s instructions! 120x safety pins, used Material colour: Sendzimir galvanized To secure the crossbeams against unintentional lifting 44x anchor bolts, new Manufacturer: Hilti Model designation: HST2 V3 M12x105 5-25 Version: carbon steel, galvanized Approved for: cracked concrete 44x shims, used Version: completely galvanized For leveling the rack frames standing on uneven ground 01x load capacity sign With specifications for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Codsyay D Ijpfx Aa Njrb General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data of the Installation: Number of racking rows: 01 pcs Length per row: 22,500 mm Number of bays per row: 08 pcs Number of levels incl. ground level: 02 pcs Volume Specifications: Pallet spaces per bay: 09 pcs Pallet spaces per row: 72 pcs Total pallet spaces: 72 pcs Based on: Load carrier: Euro-pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. weight per pallet: 1,100 kg Scope of delivery includes: 09x pallet rack uprights, used Material finish: Sendzimir galvanized Upright type: P113 Profile dimensions: 100 x 100 x 2 mm Incl. horizontal and diagonal braces, upright protectors and foot plates The uprights are pre-assembled (bolted truss construction) Height: 4,000 mm Depth: 1,100 mm 32x beam pairs, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5-hook Max. load per beam pair: 3,300 kg (with evenly distributed load) Note: The load-bearing capacity of the beams remains functional despite the holes— SSI project with thermal dust panels as per manufacturer's specifications screwed on! 64x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 36x anchor bolts, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x levelling plates, used Design: fully galvanized For levelling uprights standing on uneven floors Crjdpfxeyaxmhj Aa Njb 01x load capacity sign With information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. Any requested transport or shipment of this item will incur additional costs, which can be requested separately from us depending on delivery location and scope.

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the setup: Number of racking rows: 01 unit Length per racking row: 14,040 mm Number of bays per row: 05 units Number of levels plus ground level: 02 units Volume data: Pallet locations per bay: 09 units Pallet locations per row: 45 units Total pallet locations: 45 units Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum pallet weight: 1,100 kg Scope of delivery includes: 06x pallet racking frames, used Material finish: Sendzimir galvanized Frame type: P73 Profile dimensions: 90 x 75 x 2.5 mm Incl. horizontal and diagonal bracing, frame protectors, and base plates Frames are pre-assembled (bolted truss design) Height: 3,600 mm Depth: 1,050 mm 20x pallet racking beams, used Material color: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,300 kg, with evenly distributed load Note: Functionality of the beams is ensured despite holes (SSI project with heat protection plates bolted as per manufacturer’s specifications) 40x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintended lifting 24x wedge anchors, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Material: Carbon steel, galvanized Approved for: Cracked concrete 12x shims, used Material: fully galvanized For leveling racking frames placed on uneven floors 01x load sign Codpfx Aajyapf Ij Nsrb With specification of bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Additional transport or shipping of this item is subject to extra costs, which can be quoted separately depending on delivery location and scope of delivery.

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Crsdpfxegbkkre Aa Nob Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Codpjv Rpxljfx Aa Njrb Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.