Used Magraf Book Block Rounding Machine for sale (67,116)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. Predpfx Alszcqy Ejweb The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-20 concrete block machine is a fully automatic block production facility equipped with modern production technologies and a hydraulic system. Thanks to its PLC-controlled structure, it produces with high precision without the need for operator intervention. Operating at a pressure of 100-160 bar, the system has the capacity to produce 20 interlocks and 8 20x40x20 blocks per press. Furthermore, it minimizes labor requirements thanks to a collection robot that automatically stacks and packages dried products. The BS-20 offers an environmentally friendly production approach with its A+ energy-efficient motor system, EFF3 class electric motors, and low energy consumption. Prsdpfjxp Uwyjx Alweb It meets European quality standards with its ISO 9001:2008 quality management system, CE certificate, and DIN-TSEK compliant structure. It provides a user-friendly experience with its automatic/manual switching system that increases operational flexibility, remote fault detection via the internet, and forklift-compatible design. BS-20 Concrete Block Machine Technical Specifications Production Capacity: 100–110 pallets per hour Pallet Size: 1,000 x 920 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.2 m³ Hydraulic Oil Capacity: 400 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Product Height (max): 3,000 mm Product Length (max): 600 mm Machine Chassis: 10 mm Production in 8 Hours: 8,000 blocks / 18,000 interlocks Why Should You Choose the Constmach BS-20 Concrete Block Making Machine? The BS-20 Concrete Block Machine offers high efficiency, low operating costs, and long-lasting use for medium-sized businesses. Manufactured with the assurance of CONSTMACH engineering, this system delivers uninterrupted production performance thanks to its automation capabilities and robust construction. With spare parts warranty, fast service network, and 24/7 technical support, CONSTMACH ensures your investment operates reliably for many years. Therefore, by choosing the BS-20 model, you can maximize both your production quality and operational efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Year of construction: 2010, operating hours: 7,546 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04810, We are offering this well-maintained COMANDULLI OMEGA 100 edge grinding machine for round edges, manufactured in 2010. Manufacturer: COMANDULLI Model: OMEGA 100 Year of manufacture: 2010 Condition: good Category ID: 430 Machine type: Edge grinding machine for round edges Configuration: Belt running direction: left to right Pre-grinding support for end faces Thickness gauge 1+1 automatic pre-grinding supports 45° 8 end face grinding supports for straight and round edges 2 upper and 2 lower chamfering supports Swiveling device for chamfering supports for easy processing of pencil edges Finishing grinding support 2 roller tables, each 2m long The machine is currently in operation in Australia; the price includes transportation CIF to a European port of your choice. Prodpfxozyucke Alweb If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Podszyz Efopfx Alwsrb Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, KOLBUS DA 260 Case Making Machine Manufacturer Kolbus GmbH & Co KG, Rahden, Germany Production Year 2015 • Max. speed 40 cycles/min • Spine strip (roll) max. 500 mm • Mounting diameter 60 mm • • Production options: • • Book cover: • Open format min. 140 x 205 mm • Max. 390 x 670 mm • Hinge width 4 – 18 mm • Outer insert width 14 – 120 mm • Closed hinge width 8 – 15 mm • • Canvas in the spine of a book • Width 223 – 708 mm • Height 130 – 428 mm • Cover boards: • Thickness 1 – 4 mm • Width 95 – 328 mm • Height 140 – 390 mm • Spine board: • Thickness 1 – 4 mm • Width 6 – 90 mm • Spine strip (roll) • Thickness 0.3 – 0.6 mm • Width 6 – 90 mm • Availability immediately Psdez Ebbnjpfx Alwerb Sale Reason production reduction Condition of the Machine very good condition, well maintained, worn out according to its agecan be seen running

Condition: excellent (used), For sale: a professional Constantin Hang Maschinenfabrik Göppingen bookbinding machine, model 167-11, manufactured in Germany. The machine is mounted on a large work table and equipped with a pneumatic control system and a foot pedal, allowing for convenient operation during use. Psdszudblspfx Alwsrb Hang machines of this type were designed for professional bookbinding and production work. The design allows for easy handling and positioning of large sheets and other materials being processed. Specifications: Manufacturer: Constantin Hang Maschinenfabrik Model/Type: 167-11 Serial Number: 37886 Country of Manufacture: Germany Control: Pneumatic Operation: Foot Pedal Design: Stand-alone machine with work table Application: Bookbinding / Printing industry The machine is sold with the large work table shown in the pictures. Used condition. Shows normal signs of wear and tear appropriate for the age of the machine. The visual condition is consistent with the pictures. Made in Germany.

Condition: like new (used), Year of construction: 2025, Maufung MF-Smart390A Auto Book Casing In & Joint Forming Line Model: MF-Smart390A Power Supply: 380V, 50HZ Mainframe Power: 9kW Block Thickness: 2–60mm Block Size (Max): 390×297mm Block Size (Min): 100×100mm Mechanical Speed: 600 pcs/hour Machine Dimensions (L×W×H): 4950×2650×2000mm Machine Weight: 2000kg Maufung Head and Tail Banding Machine Model: MF-HBM420 Model: MF-HBM420 Power Supply: 220V, 1 Phase, 50HZ Mainframe Power: 1.5kW Air Compressor: 6Bar Machine Speed: 11 pcs/minute Book Block Thickness: 10–60mm Book Block Size (Max): 350×420mm Book Block Size (Min): 100×100mm Machine Dimensions (L×W×H): 700×850×1550mm Machine Weight: 270kg If you have any questions or need more information, feel free to send us a message or give us a call. Prjdpfx Aloy Sv Inewob

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Pjdpfx Alez Dtcbeworb Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Fully automatic, both carrier sheet and cover sheet are processed automatically. Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Max. format 1000x1400 mm Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Prsdpfx Aey D D A Dolweb Documentation & circuit diagrams available. Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck The machine is in operation and can be inspected.

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Calendar Binding Machine, Binding Size: 600 x 700 mm Fully automatic calendar punching and binding line. Automatic calendar hanger insertion. Max Punching Thickness per Stroke: 4,5 mm (depending on pitch, material and width), Standard Binding Dia: 1/4" & 5/16", Standard pitch 3:1", Variable speed: 500 to 2300 pieces/hour, depending on size, thickness and quality of materials. Complete with exit conveyor. Mechanical Condition: Very Good Power requirements: 400 V, 3-phase. External air supply required. Prsdoz E S I Sepfx Alwjb Delivery and installation service available. (POA)

Condition: good (used), Year of construction: 2008, functionality: fully functional, working width: 560 mm, type of input current: AC, infeed height: 340 mm, empty load weight: 3,200 kg, infeed width: 560 mm, Equipment: documentation/manual, Smyth 150 4D Large Thread Sewing Machine, 2008 The machine is still connected to the power supply and has very few operating hours, as it was only used for half shifts! Format ranges & performance: Maximum sheet format: 560 x 340 mm Minimum sheet format: 135 x 80 mm Maximum mechanical speed: 150 cycles/minute Number of stitches: 13 stitches Stitch length: 24 mm Feeder & opening system: Feeder type: Automatic sheet feeder (4D-Stream Feeder) Opening devices: 4 upper suction devices + 4 lower suction devices (4+4 openings) Prodpfxszpfiys Alwjb Overlap opener: Integrated LAP opening system (suction opening for signatures with overlap) Equipment & control: Operation: Computer-controlled setup via a swiveling color touchscreen display Total machine weight: approx. 3,200 kg Video available upon request!

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, type of input current: three-phase, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Podpfx Aloxtau Eswjrb Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, Equipment: swiveling upper roller, - Capacity 1050 x 3 mm - Roller diameter 90 mm - Conical bending - Swing-out upper roller - Brake motor - Foot control - Emergency stop Psdpeq H D S Rjfx Alwsrb - Documentation - 400 V

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Pjdsztpbnjpfx Alwerb Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 0/41938, BDM20 case maker (book cover machine), 1992 Podpfxjxqd I Ds Alworb

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Punching Up to 30,000 – 40,000 sheets per hour Predpfx Aletx Ux Rowsb Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA)

Condition: used, Year of construction: 1979, machine/vehicle number: 58, Rundegerät für Buchdecken / Rounding machine for book cases Schmedt PräRund Serial-No. 58 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Prjdpfxjtzc R Ej Alweb On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Bookbinding press with tapping block Predpfx Alozt H U Eswob The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure

Condition: used, Year of construction: 1998, functionality: fully functional, R-500 reamer, complete with: 3 – 1/4 – 3/8 – 7/16 inch reaming heads Pjdpfoz D Ayisx Alwsrb Hook attachment device

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 680971, BT 610 conveyor belt feeder 500, RHE 622, EP 680, 1x AS 620 heating section, 1x WR 630, Conveyor belt 2800 mm to Diamant, Automatic book block control, Head and tail band station, IR heating for book rounding, Rounding and pressing station, One glue and gauzing station, One glue and combined head and tail band backside glue station, Two automatic preheater systems for gauzing and capital stations, Pressing station, Long hard cover conveyor belt Podpfxjx Ryqdo Alworb

Condition: good (used), functionality: fully functional, Production line for sealed block bottom bags and standard paper bags. Upon request, we can sell you only the paper bag machine. The necessary parts are available. The sealing unit can also be used offline without the bridge. Pre-printed bottom sheet Self-adhesive bottom sheet In-line coding printer Material: Paper and composites Pjdpfx Alezgwniswsrb Format: Bag width: 140 mm - 320 mm Bag length: 240 – 900 mm Bottom width: 70 – 180 mm With servo drive - Block bottom standard materials: Uncoated paper: 70 g/m² and 100 g/m² Coated paper: 80 g Plastic films (LDPE): 40 µ, 70 µ and 100 µ PE-coated paper: Pa 60 g/m² + LDPE 40 g/m² airsickness bags: Pa 65 g/m² + LDPE 23 g/m² Paper-aluminum-PE composite: Alu 8/25 and Alu 8/50 PET/Alu/PE composite: PET 12 µ / Alu 8 or 9 µ / LDPE 90 µ - Possible materials Outer layer Coated paper 60–120 g/m² Over 100 g/m² only in large format Inner layer LDPE mono-film 0.03–0.10 mm (possibly needled) Alternatives: LDPE 0.08–0.12 mm OPP 20–40 µ PE-coated paper (various combinations) Aluminum foil on carrier paper with PE coating Construction from outside to inside 30 g/m² bleached kraft paper 12 g/m² PE 0.008 mm aluminum foil 25 or 50 g/m² PE Intermediate layer (only with material 21) Alternative: Bleached kraft paper 80–100 g/m² Brown kraft paper 80–100 g/m² LDPE 80–100 µ

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Kolbus SW.E 500 is a high-performance corner-cutting machine for the industrial processing of high-quality cardboard packaging. It was specifically designed for the automated production of luxury packaging and rigid boxes. The Kolbus SW.H 500 is a high-performance box-making line from the German manufacturer Kolbus Group GmbH. The machine processes pre-scored and corner-cut cardboard sheets. The Kolbus SW.H 500 applies adhesive to the pre-formed creases, erects the side walls, and precisely fixes them to create a stable, foldable rigid cardboard box. Prsdpozblxmofx Alwob

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Dust suction device ESTA DDE 8500, 7,5kW Psdpfszwlnrjx Alwsrb Including spare parts, consumables Full line has less than 2000 working hours Very good condition Available for inspection

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Solema Autoload Year: 2000 Nipping machine Pjdpfx Aoyi Emyelwjrb Sigloch NHG-60 1 Year: 1999 Description: - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Sigloch SB 3100/2 Year: 2005 Description: - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Description: - 2 pressing stations

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 123, We are selling a fully functional Kolbus DA260 casemaking machine. The machine has approximately 12 million cycles. It comes with a CD containing the software. Testing of the machine in production is possible by arrangement. Pedpfjyw Tc Tjx Alwjrb