Used Magraf Book Block Rounding Machine for sale (67,431)

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Hsdpfswpku Djx Al Asfi Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: new, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 2,070 mm, number of digital displays: 1, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity 2070 x 1.5 mm Hjdpfx Alevkkkie Aofi - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: new, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,070 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1070 x 3 mm Hfedpfxowhgm To Al Aji - Conical rollers - Pivoting top roller - Foot pedal control - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2024, Panel thickness (min/max) 5/50 mm Cutterhead rotation speed 30000 rpm Motor power 0,8 kW Table dimensions 320x440mm Milling axis Ø 6 mm Sufficient and constant compressed air Ø 6 mm Power 220 V/50Hz Transport dimensions 720x500x470 mm Weight 25 kg Hedpfsq Ivmuox Al Asfi Price 299 Eur (EXW Jonava, Lithuania)

Year of construction: 2023, condition: new, APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - scafa gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: - Press unit - Pallet space - Pallet feeding line Hfjdpfx Aleht Uwpe Aoi - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pallet discharge line with freshly moulded products - Hydraulic unit - Electrical control panel with PLC. TECHNICAL FEATURES: - Pallet dimensions: 1240x750x45mm - Useful surface: 1100x630mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Cycle time: 35 - 60 seconds - Total Installed power: 30,00 kW MAIN DIMENSIONS : - Width: 2,10m (without hydraulic unit and control panel) - Length: 8,00m - Height: 3,10m - The hydraulic unit and control panel are placed at the side, at a distance of 1.00m from the chassis and occupy a surface area of 2m2. - Machine mass 6,000 kg

Year of construction: 2024, condition: new, ~ SPEED 700 , SEMI AUTOMATED ~ APPLICATIONS Production of: - paving - kurbs - concrete blocks for: -masonry -foundation blocks -posts, floor slabs -chimneys, -gutters -roadway gutter covers. ADVANTEGES : - Vigorous vibration coupled with hydraulic pressing of the concrete guarantees high quality concrete products. - Vibrators mounted on the counter mold play an important role in concrete compaction. - Chrome-plated pipe guide columns - Teflon-coated sliding bearings - Our wide range of molds can provide a diverse production. - Reliable mechanical and hydraulic systems. OPERATE : ~ Mostly manual: -Drawer(back/ fort -Mold (up/down) -Counter Mold (up/down) ~ Commands executed automatically: -start/ stop vibration when reaching height -start/ stop pallet feeding exhaust line stop) COMPONENTS: 1.) the press 2.) pallet stacking space 3.) pallet feeding line 4.) concrete bunker 5.) drawer (1) for concrete mold feeding 6.) pallet discharge line with fresh products 7.) hydraulic unit 8.) lever panel for the machine operator TEHNICAL FEATURES: - Pallet dimensions: 700x670x40mm - Active surface: 640x640mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Hydraulic pump flow: 40 l/min - Cycle time: 60 -100 sec (Semi-automatic version) - Cycle time: 30 – 50 sec (Fully automated version) - Installed power: 15.50 kW - Hydraulic power unit: 7.5 kW Hfodpjhufyhefx Al Aei - Vibrating table vibrators: 6.00 kW + 0.28 kW - Counter mold vibrators: 0.80 kW - Discharge line: 0.55 kW - Supply voltage: 380V OVERALL DIMENSIONS: Width: 1.60m (without hydraulic unit and control panel) Length: 5.60m Height: 2.85m Machine mass (without mold): 4,000 kg Approx. mold mass: 250 - 300kg ADDITIONAL PRODUCTS / OPTIONAL: 1.) AUTOMATIC OPERATION : ( + 6.300 euro ) - PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation Reduces the time of a production cycle, higher productivity (30 -50sec) 2.) SECOND DRAWER (2) for finishing layer for paver and kurbs + BUNKER ( + 3.900 euro ) 3.) CONCRETE MINISTATION SEMIAUTOMATED ( + 18.800 euro) Component parts: a.) Sand bunker 2 m2 + Volumetric dosing with conveyor belt + Vibrator b.) Gravel bunker 2 m2 + Volumetric dosing with conveyor belt c.) Electric control panel d.) Concrete Mixer MX 300 ( Fluid concrete: 300 liters Semi-wet concrete: 200 liters, 2.4 cubic meters of semi-wet concrete/hour ) 4.) AUTOMATIC LIFT (elevator) ( + 4.000 euro) 5.) CONVEYOR 6M , for transporting the concrete to the machine bunker ( + 4.000 euro) - Band width: 500mm - 7mm smooth rubber mat with 3 inserts - Motor 1.5kW (380V) PLEASE FOR THE COMPLETE OFFER SEND US AN EMAIL.

Condition: new, Applications: Production of concrete blocks for wall, foundation, pillars, roofs, chimneys. Hedjiwut Tepfx Al Asfi Production of concrete pieces for water drainage Advantages: optimal distance between the mould and the over-mould ensures a comfortable position for the operator - Handling the steering wheel requires minimal effort thanks to a gear force reducer; - Simple operation and maintenance professional vibrator with low power consumption Automated stopping of the vibration once demolding occurs Wide variety of molds - there is the possibility of installing moulds for high concrete elements (maximum 370mm)* Technical specifications: Maximum mold dimensions: 800x500mm Maximum height of end product: 370mm Cycle duration: 60 seconds Supply power: 0.28kW Supply voltage: 220V Overall dimensions: 1.35x 1.55 x 1.7 m Machine weight (including a mold): 400 kg Vibrator rotation speed: 3000rpm Concrete consumption: 2 m3/hour Recommended concrete mixer: MX300L

Condition: new, Motorised concrete block machine Production of concrete blocks for use in: masonry, foundation, pillars, floors and chimneys. Powerful hydraulic pressing Operator seat Concrete bunker – 500 liters Automated lift of the counter mold Mold maximum dimensions: 1200x400mm Maximum height of concrete product: 200mm Cycle duration: 45 seconds Installed power: 5.5kW Supply voltage: 380V Hfjdpshx N Nmsfx Al Aoi Overall dimensions: 2.2 x 2.0 x 1.85m Mass (including mold): 2000kg Vibrator motor rotation frequency: 3000rpm Dry concrete consumption: 4 cubic meters/hour

Year of construction: 2023, condition: new, 1.) Applications: Production of concrete blocks for: masonry, foundation, pillars, floor, belt, chimneys; gutters and gutter covers; 2.) Advantages: - High productivity - the active surface of the mold 1200 x 800mm (12 masonry blocks 400x200x200mm) - Hydraulic actuation - Teflon bushing of the sliding bearings on the guide columns - Reliable mechanical and hydraulic systems. - Operator seat - Concrete hopper – 700 liters - Drawer for concrete supply to the mold – hydraulically operated - 2 vibrators on the punch plate - 4 electric motovibrators - mold vibration - Automatic stop of vibration when unpacking - Polyurethane coated wheels + Hydraulically actuated wheel to change the direction of travel - Large variety of molds - Allows the installation of molds with a height of 370mm - can produce roadable ditches and open ditches 3.) Technical characteristics: Hjdpjiwxrgjfx Al Aefi - Maximum mold dimensions: 1200x800mm - Maximum finished product height: 370mm - Duration of a cycle: 60 seconds - Hopper capacity: 700 liters - Installed power: 15 kW - Supply voltage: 380V - Overall dimensions: 3.30 x 2.30 x 4.00m - Mass of the machine (with mold): 4000 kg - Vibration frequency: 3000rpm - Required amount of semi-dry concrete: 8 m3/hour - Recommended mixer: SAB6MC automated concrete station

Condition: good (used), Year of construction: 1994, Electrical connection: 380V / 50Hz, 16A Air pressure: 7 bar Working height: 1005 mm Hfjdpfx Aljzaak Ue Asi Width: 1300 mm Height: 1500 mm Depth: 1200 mm Weight: approx. 300 kg Condition: good, second-hand

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 123, We are selling a fully functional Kolbus DA260 casemaking machine. The machine has approximately 12 million cycles. It comes with a CD containing the software. Testing of the machine in production is possible by arrangement. Hedpfx Aljyw Tc Ts Aofi

Condition: used, Mechanical machine vice RÖHM type 711-03 Jaw width: 120 mm Jaw height: 45 mm Clamping range: 0-115 mm Maximum opening: 117 mm Guideway height: 64 mm Dimensions (L x W x H): 400 x 200 x 110 mm Net weight: 24 kg Hfedpfx Aey E T A Njl Aoi Good condition

Condition: used, Year of construction: 2008, functionality: fully functional, Edge folding machine with stop Hodpsy Uh Uxofx Al Ajfi Programmable for up to 20 edge folds.

Year of construction: 2022, condition: new, This system operates in automatic mode. The transfer of pallets between production line and curing area is carried out by Finger Car. 1 operator supervises the production process via control panel equipped with 4 different monitor, pc system. Automation system software has user-friendly interface and can be translated into customer’s preferred language. Production line requires the construction of curing chambers with racks. Steam curing is recommended for working in one shift and is mandatory for working in two shifts. Hfodpfxsibcycj Al Aei Transfer of production pallets with green products to the curing chambers as well as the transfer of pallets with cured products to the cubing station is carried out by automatic pallet transport system known as Finger Car. Finger car consists of lower and upper electric trolleys, which move along a set of rails built perpendicularly to the concrete block production line. The upper trolley has steel forks for grabbing and holding pallets. It transfers concrete products to the curing chambers, going inside each chamber to place pallets with wet products on racks to cure. On its way back it takes a stack of pallets with cured products and loads it into the lowerator. The price given as 1.200.000 USD includes all the machine equipments, concrete batching plant and 3000 pallet rack system. It is very special offer for August 2022!

Condition: new, Year of construction: 2024, machine/vehicle number: 5182024016, Our ZIM 518 machine is an entry-level and investor-friendly machine designed for the production of double-layer paving stones. ZIM 518 comes out with low energy consumption, low investment cost and high return on investment. Our machine, which can produce 5 concrete blocks or 18 concrete paverstones in one press, is designed to produce 1000 pallets per day. However, if requested, it can also produce concrete curbstones of 1 meter length! To facilitate this production and increase quality; It has many features such as driver-controlled vibration system, special balancing system on the upper mold, and a specially designed vibration table. Our machine is designed as manual system and it is managed by the operator with a hydraulic unit and a joystick. Hfodeicap Tjpfx Al Aoi Although it is a budget-friendly machine and can be installed within hours, our ZIM 518 machine enables the production of high quality paving stones. Our machine gives you a good position in the competition! We are using “ FULLDRIVE ” frequency controlled vibration systems in our machine. This helps the life cycle of vibration engines and also decreases the total electrical consumption of vibrators. This vibration system, which we have designed using our experience from our deep-rooted past, can work for many years without any malfunction and offers you the most efficient service.

Condition: new, Year of construction: 2025, machine/vehicle number: 12302022104, ZIM 18 ULTIMATE is a high-capacity, fully automatic concrete block machine designed for industrial-scale, non-stop production. With CNC-machined body components for maximum precision, advanced automation options, and low labor requirements, it stands as one of the most durable and efficient solutions on the market. Compatible with Finger Car, U-Type, and L-Type systems, it integrates seamlessly into any high-output facility. Precision Engineering and High Efficiency Capable of producing 18 hollow blocks per cycle and 1400–1600 pallets per 8-hour shift, ZIM 18 delivers consistent high-volume output. Its entire machine body is processed on CNC machining centers, ensuring perfect alignment, zero tolerance errors, and unmatched stability even under heavy workloads. Advanced Mortar Feeding and Compaction Systems The machine features a loadcell-based mortar monitoring system, enabling precise control over mortar flow. Its proportional mortar carriage includes a highly advanced agitator system, ensuring that the mold is filled evenly and quickly. Combined with a 4-point mold balancing system and an electronic mold stopper system, the machine guarantees uniform block density and superior surface quality on every press. Hfedpfsfnz T Rox Al Aoi Fast and Automated Mold Change The pneumatic mold connection system allows mold changes in less than 15 minutes. The machine body is separated from the press unit via rails, and automatic body height calibration eliminates any manual adjustments, minimizing downtime and operator intervention. VIBROSTAR Oil-Bath Vibration Technology ZIM 18 uses the VIBROSTAR oil-bath vibration system, designed for maximum cooling and continuous operation. With 6 shaft-connected vibration motors producing a total of 33 kW, the system ensures high-frequency, uniform compaction for exceptional block durability. This vibration unit, engineered with ZİM’s decades of expertise, is built to operate for years without malfunction, delivering unmatched performance and cost efficiency.

Year of construction: 2022, condition: new, machine/vehicle number: 82002022104, ZIM 1025 PLUS Block and Paverstone Machine is special design machine for block and interlock production that works fully automatic.The movement of the machine is programmed the PLC microprocessor computer. By changing moulds all kinds of blocks, paverstones, curbstones, grass stones, lentos and precast concrete elements can be produced in a serial way. 20cm block can be produced 10, interlock paverstones can be produced 25 units in one press. Machine is able to produce the insulated block upon demand. Hfsdpfx Aoifz Ahsl Asi Thanks to special features developed by our engineers machine have very short cycle time. For example mould changing is wery easy and take short tme in new system. Automation system and operator panel which is developed and redesigned in long years become user friendly and useful. With our special design vibration table you can produce high quality products with less energy. We use pneumatic bellows in machine mould connections, due to this system vibration on mould is expanded regular and uniform. Service and maintenance is easy thank to our strong machine chassis and ergonomic design

Year of construction: 2022, condition: new, ZIM 820 Concrete Pavers and Block machine can operated semi automatically with the control of the operator. Upon request, it can be manufactured fully automatic with PLC control. By changing moulds all kinds of pavers stone , curbs, block and precast concrete elements such as grass pavers series can be produced in a serial way. 20cm block can be produced 8 units in one press with the machine,or 20 interlock stones can be produced in a press. Machine is able to produce the insulated block upon demand. Hedoia N Idepfx Al Aofi Our company’s special production vibrator is used. Thus, it can produce smoothly and quickly. Collector Robot (cuber) can be used to empty the dried products on the production pallets. A model with a single hopper, ZIM 8, is also available for manufacturing single layer bricks/pavers, hollow block, and for special blocks/pavers.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 18,972 h, machine/vehicle number: 363/11, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 150 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of upper roll: 130 mm Diameter of lower rolls: 150 mm MACHINE DETAILS Control: CNC Drive: Hydraulic Number of rolls: 4 Number of driven rolls: 4 Hodpfjy Hhwqsx Al Asfi Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,200 x 1,200 mm Transport weight: 2,000 kg Transport packages: 2 Operating hours: 18,972 h EQUIPMENT Cone bending CE marking

Condition: new, Year of construction: 2026, - Capacity: 700 x 4 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical rollers - Rotatable upper roller - Brake motor - Foot switch - Emergency stop - Documentation - 400V Hodpfxjh Rbvge Al Ajfi

Condition: new, Year of construction: 2026, number of rollers: 3, - Capacity: 700 x 4 mm - Conical rollers Hedpfx Alsh Rayto Asfi - Removable top roller - Brake motor - Foot pedal control - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 12 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. Rolling bruh rotation speed: 8-26 m / s Rolling brush public speed: 1-15 rpm machine thickness servo adjustment precision: 0,01 mm Length: 3800 mm Width: 2300 mm Height: 2400 mm Machine weight: 5500 kg Electrical connected load: 49,5 kW Standard configuration Machine configuration:1st station: Sanding belt2nd station: Brush elements Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Extended machine accessories Hfsdpsygx A Nsfx Al Aei Optional feeding mode:1. Feeding with strong permanent magnet adsorption transport (suitable for steel workpieces. Workpiece size ≥ 30 mm × 30 mm)2. Feeding with vacuum negative pressure adsorption transport (suitable for stainless steel plates, copper plates, aluminum plates, etc.) that cannot be magnetically adsorbed. Workpiece size ≥ 50 mm × 50 mm)

Condition: new, Year of construction: 2025, Case Maker with Robotic Hand – High Efficiency Book Cover Machine We are offering a high-quality case making machine designed for the production of book covers, notebooks, and similar hardcover products. Equipped with a robotic hand, this machine ensures precision, consistency, and efficient handling during the production process. Hsdpfx Aljy Dqx Ss Aefi It is suitable for working with a wide range of materials, including gray board, MDF, wooden boards, mirror board, as well as various cover materials such as art paper, specialty metallic papers (gold/silver), fabric, and velvet. Ideal for print shops, binderies, and packaging manufacturers looking to improve productivity and product quality. Working speed: 15-28 pcs/min Max hardcover size: 460x300mm Min Hardcover size: 55x60mm Case Thickness range: 1-12mm Cover Thickness range: 100 -250 g/m2 Case materials range: Gray board, wooden board. mdf, mirror board Cover materials range: Art paper, Silver/gold paper, Fabric, Velvet Machine dimension: 1150x1500x1700mm Machine weight: 650kg

Condition: as good as new (ex-display), functionality: fully functional, type of input current: AC, SWIGRAPH - MARLON 5000 PVC Coil Forming Machine. Hodpfx Aev Ifc Isl Aofi Automatic PVC/PET forming machine for plastic coils. Coil diameter range: 6mm to 56mm Cut lengths: 7.62cm to 122cm Coil pitch: 4;1 Power supply: 230 vac + external air supply

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P5-0174, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 175 kg, space requirement height: 1,097 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, table width: 1,070 mm, input frequency: 50 Hz, empty load weight: 105 kg, Equipment: safety light barrier, Double Loop closing machine for books and calendars. Hjdpfx Alsrzulue Aofi Adjustable sizes for all diameter rings up to 25 mm Footswitch controlled. Light beam safety guard. Power requirements: 380-415 v 50/60 Hz