Used Microstep Mg 6001.15Prkgb+Ch500P for sale (909)

Condition: good (used), MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Iijdpfx Aoyvd Uisgyeh Current requirement: 120 A Machine type: CNC plasma cutting system CNC control: iMSNC Design: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection for extraction system: 400 volts Motor power of extraction system: 7.5 kW Compressed air generation: Screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: present Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² Ijdpfxeyzr Nme Agyeih • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Manufacturer - N&N Nadratowski. Model - MG-450/160. Iedpfx Agewplc Aeyjih Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: used, Year of construction: 2017, controller model: NEXUS, _____ Description: Year of manuf. : 2017 Material thickness : 14 mm Technical data Working length:3,100 mm Bending capacity / Folding capacity:14 / 12 mm Upper roll diameter:290 mm Lower roll diameter:270 mm Side roll diameter:210 mm Main motor power:7.5 kW Machine length:4,475 mm Machine width:1,460 mm Machine height:1,520 mm Machine weight:8,000 kg Control system:NEXUS TouchScreen DNC equipment :- NEXUS DNC control system with touchscreen interface :Programming and operation options: :1. Manual mode – all movements controlled via joystick :2. Teach-in mode – saving of positions :3. Input of values for the rollers via the screen Isdpfx Aszuikxjgyeih :Storage capacity for 300 programmes : :- Rollers made from C45 alloy steel, induction-hardened :to 50–55 HRC : :- Conical bending unit with both :side rollers set at an angle, lower roller set at an angle and :bearing with hardened guide roller : :- Calibration unit for re-rounding :welded tubes : :- Brake for the upper roller for greater precision when :positioning the material.

Condition: used, Year of construction: 2014, Manufacturer: N&N Model: MG-450EFW/160 Year: 2014 Condition: Used Serial Number: 1047 Stock Number: 3438J Mixer: double paddle mixer, intermeshing Capacity: 450 litres Mixing speed: 5 - 40 RPM, variable speed Hole plate diameter: 160 mm Iisdpfoz D Dfyox Agyjh Infeed height: 1620 mm Outfeed height: 740 mm Compressed air: 6 - 8 Bar Power: 3 x 400, 50Hz, 36.3kW Dimensions: 2350 x 1650 x 2700 mm Weight: 1815 kg With PZ-2/250 lifter for 200L tote bins, pneumatic lid and safety cover over head

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m Iiodpfog N Nlvsx Agyjh MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Iijdpfx Agsz Ad Rcoyjh Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Year of construction: 2008, condition: good (used), functionality: fully functional, Complete Industrial Recycling Line for Plastic and Non-Ferrous Metal Separation A presentation video is available. A presentation video of the complete recycling line, recorded before dismantling, is available and can be provided to interested buyers upon request. The video shows the complete configuration of the installation prior to disassembly. A complete industrial recycling line, suitable for processing rigid plastics and other recyclable materials, is offered for sale. The installation is in good overall condition, featuring a robust industrial design and high-quality European components. Main components: Feed hopper MEM 46 MG Hammer Mill (Italy) IFE Vibrating Feeder / Vibrating Screen Eddy Current Separator Conveyor belts Electrical control cabinets Steel supporting structure Technical information Hammer Mill Manufacturer: MEM – Società Generale Macchine Edili S.p.A. (Italy) Model: MEM 46 MG Year of manufacture: 2008 Hammer Mill Weight: approx. 7,080 kg Suitable for processing: Rigid plastics (PVC, PE, PP, ABS, PC, etc.) Plastic profiles Iedjznmgqepfx Agyoih Plastic containers Mixed recyclable materials Non-ferrous metal recovery Aluminum separation Advantages: Complete recycling line Heavy-duty industrial construction European manufacturers Robust and reliable equipment Ready for installation Ideal for recycling companies looking to increase processing capacity The line can be inspected by appointment. Additional photos and videos are available upon request.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1289892, FREWITT MG-800 OSCILLATING SCREENING AND GRANULATING MACHINE Pharmaceutical version – Stainless steel – Comprehensive documentation DESCRIPTION For sale is a Frewitt MG-800 oscillating screening and granulating machine in high-quality stainless steel/pharmaceutical version. The machine is in very good and well-maintained condition and is fully functional. The MG-800 is suitable for the controlled crushing, granulation and screening of products, especially in the pharmaceutical, chemical and food industries. The oscillating operating principle, in combination with interchangeable screen inserts, allows for adaptation to different products and desired particle sizes. PHARMACEUTICAL/STAINLESS STEEL VERSION The original Frewitt specification documents a high-quality stainless steel design: - Machine body stainless steel 1.4401 - Product-contacting parts stainless steel 1.4301 - Product-contacting interior surfaces polished - High-quality, hygienic design - Enclosed machine design The system was designed for professional use in demanding production environments. TECHNICAL DATA Manufacturer: Frewitt, Switzerland Model: MG-800 Machine No.: 1289892 Machine type: Oscillating screening/granulating machine Voltage: 380 V Frequency: 50 Hz Current consumption: 4.4 A Version: Stainless steel / Pharmaceutical version EQUIPMENT - Frewitt MG-800 granulating machine - Stainless steel feeding system - Stainless steel discharge system - Rotor - Screen basket - Extensive selection of various screen inserts - Infinitely adjustable speed control - Protection and safety devices - Separate operating/control unit - Sturdy stainless steel base - Extensive stainless steel piping and connections Iisdpfsvt Sywsx Agyjh The various screen inserts available allow for flexible adaptation to different products and desired granule or particle sizes. DOCUMENTATION Extensive original Frewitt documentation is available for the machine, including: - Technical documents - Original drawings - Design drawings - Specification and material specifications - Spare parts/component information The available original documentation is particularly advantageous for use in pharmaceutical and industrial environments. CONDITION / FUNCTION The machine is in very good used condition and is fully functional. Inspection and test run are possible by arrangement at our premises. Price on request. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Iodpfoz Eq Epjx Agysih Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Iodpfozc D Enex Agysih Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, Rotary table 1,250 x 1,400 mm (interference circle 1,700 mm) Heidenhain 530 Diagonal milling head with 1° x 1° indexing Speed up to 5,000 rpm Tool holder SK50 Tool changer with 40 positions Internal coolant supply with 19 bar Chip conveyor in longitudinal direction Isdpfx Ajx Iuccegysih

Condition: like new (used), Year of construction: 2025, operating hours: 778 h, functionality: fully functional, machine/vehicle number: 4152034870, overall weight: 610 kg, fuel type: electric, pressure (max.): 10 bar, noise level: 73 dB, type of cooling: air, Equipment: documentation/manual, type plate available, | Manufacturer | Schneider Druckluft GmbH | | Model | AMG 37S MEAA | | Type | Screw compressor | | Year of manufacture | 2025 | Iijdpsz Tcl Ejfx Agyoh | Product number | 4152034870 | | Motor power | 37 kW | | Power supply | 400 V / 50 Hz / 3 phases | | Operating pressure | 10 bar | | Maximum pressure | 10 bar | | Air flow rate* | 5,700 l/min or 5.70 m³/min | | Weight | 610 kg | | Dimensions (W × D × H)* | 1,330 × 830 × 1,555 mm | | Noise level | 73 dB(A) | | Air connection* | 1¼″ | | Maximum ambient temperature | 40 °C |

Condition: good (used), Year of construction: 2010, operating hours: 912 h, functionality: fully functional, Well-maintained and little-used Gabbiani / SCM Galaxy 105 horizontal panel dividing saw. In TOP condition!! Only 912 operating hours. Iedpfx Agjz Evm Ssyeih Year of manufacture: 2010 Cutting width: 4,500 mm Fence depth: 4,100 mm Cutting height: 105 mm Saw blade: 380 mm The machine can be inspected while running.

Condition: like new (used), Year of construction: 2005, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2500 x 2000 mmTable construction: Continuous rotation with a hydraulic breakNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mmY axis traverse: 1500 mmZ axis traverse: 1300 mmVertical capacity (VC): -5 / 1295 Milling head Auto-indexing Orthogonal 90º - Bodies B C (1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 5000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 20000 mm/min Weight and dimensions Machine weight approximate: 39000 kgMaximum weight on table: 13000 kgMachine dimensions approximate: 7980 x 8000 x 3750 mm Accessories Guarding: Peripheral without roofAutomatic tool changer: ATC-60Chip conveyor: 1 rear longitudinalElectronic handwheel: HR-410Coolant: External internal high-pressure coolant through spindleCoolant filter: Paper strip filter Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Iisdpfey Az H Djx Agyjh

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, replacement drive components, and an Extract DUO two-bag dust extraction unit. The machine has seen limited operating hours and has undergone annual brand-name servicing. The machine can be inspected while in operation. The selling price includes professional disassembly and crane loading onto a truck. The organization and costs of transport are the responsibility of the buyer. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 Iodpfx Agez E Rinjyoih 14 tool storage spaces on the moving part, and an additional 8 on the fixed part. Extract Duo dust extraction unit technical specifications: Fan power kW: 5.5 Filter area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Delivered air volume m3/h: 6000

Condition: used, - Bongard 8.64 MG Series 4 - External dimensions: W 1440 x D 2700 x H 2600 mm - Baking chamber: W 680 x H 1900 mm - Rotating rack: 600 x 800 mm, 19 levels - Baking capacity: Up to 152 baguettes per batch - Rack rotation diameter: 1120 mm - Total baking surface: 9.1 m² - Heating capacity: 70 kW - Connection power: 0.18 kW - Maximum temperature: 280°C Iiedpswr T Edefx Agyjh - Lifting mechanism: Rack with automatic lifting - Gas burner included for fast and even baking - Opticom electronic controls for precise baking parameter management - Pulsed steam injection, ideal for crispy and golden breads - Ergonomic handles and controls positioned on the right for easy operation - Fresh air intake at burner for optimal performance - Voltage: 400 V / 3-phase - Weight: 1390 kg - Serial number: 930000015837 - Year of manufacture: 2014 Bongard 8.64 Series 4 Rotary Rack Oven – Gas or Oil Fired – Used A Compact Solution for Efficient and Uniform Baking Lrjy Tdewr T Edjxugsr Discover the Bongard 8.64 Series 4 Rotary Rack Oven, an outstanding second-hand solution offering both compactness and high performance. Designed to meet the needs of demanding professionals, this oven is ideal for maximizing production efficiency while optimizing your bakery space. Superior Performance for Even Baking The Bongard Series 4 Oven stands out thanks to advanced technologies that ensure uniform and top-quality baking: - Soft Flow Ventilation: This technology provides gentle, uniform air circulation, perfect for baking delicate goods such as fine pastries and rolls. Thanks to even heat distribution, your creations will remain intact and achieve ideal baking results. - Efficient Steam System: Equipped with structured cast iron gutters, the oven produces high-quality steam to improve the development of your bakery goods. For greater needs, optional ESG steam units can boost steam production capacity, ensuring optimal performance. Durable and Practical Design The Bongard 8.64 Series 4 Oven is built to withstand the rigors of intensive production environments while providing excellent user comfort: - Robustness and Longevity: Fitted with a high-performance refractory stainless steel heat exchanger and a reinforced base, this oven is engineered for outstanding durability. Electric elements are rigorously selected for maximum service life. - Simplified Maintenance: The seamless stainless steel baking chamber facilitates cleaning. Features such as the raised-edged floor and retractable steam units minimize residue accumulation. The listing was translated automatically. Translation errors are possible.

Condition: excellent (used), Column Drilling Machine Inventory no.: 3719 Manufacturer: Huvema Model: HU MG 40 S * Drilling capacity in steel: 40 mm * Thread cutting: M24 * Spindle taper: MK 4 * Throat: 350 mm * Drilling stroke: 180 mm * Table: 500 x 450 mm * Column diameter: 150 mm * Speed range: 50 - 1450 rpm * Automatic feeds * Thread cutting unit M24 * Coolant system * Machine lamp * Tool ejector * Safety guard * Table swivel and tiltable Iijdpfjyzkbbox Agyeh * Total power requirement: 1.5 kW * Machine weight approx. 440 kg * In very good condition!

Condition: as good as new (ex-display), Year of construction: 2021, UZMA MG-R 2504 Cutting length: 2560 mm Cutting capacity for steel: 4 mm Back gauge controlled via the control panel Return to center function Sheet support Cutting line illumination CE Iodpfxsignz Aj Agyjih

Condition: used, functionality: fully functional, empty load weight: 3,340 kg, maximum load weight: 14,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 03/2027, suspension: air, tire size: 265/70 R 19,5, tire condition: 95 %, color: black, Year of construction: 2024, Equipment: ABS, center pivot plate, Object number #31145 BPW axles Tire size 265/70 R 19.5 Disc brakes Tank volume 5,000 - 7,000 mm Pneumatic locking system, 4-way 50mm drawbar eye Adjustable tank stops Wabco Smart Board Twin tires Toolbox Tire pressure monitoring system Foldable side underrun protection Lifting/lowering ABS/EBS Axle load indicator Iisdpfoz R Adpex Agyeh Toolbox LED work lights Leasing or financing available upon request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 2,00,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Iisdpfxjyzim Ao Agyjh Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Condition: Very good – In perfect working order Availability: Immediate Technical description: Cable granulation line including: Isdpfx Agox It N Ujyoih • Pre-shredder, completely overhauled recently o All rotor bearings are new o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper • Feeding conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: • Pre-shredder: 1 set of knives + counter knives • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: • Photos and further information available upon request 📩 Contact us for more information.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1009456, total height: 1,350 mm, total width: 600 mm, total length: 700 mm, overall weight: 30 kg, type of input current: AC, input voltage: 230 V, input current: 6 A, Equipment: documentation/manual, Audion PANDYNO Bag Filling and Sealing Machine Isdpfez Hyr Ijx Agysih For sale is an Audion PANDYNO bag filling and foil sealing machine on a mobile stainless steel frame. This system is suitable for filling and sealing bags with powders, granules, and similar products. The machine is in good condition and is offered with documentation. It has only been used for food products.

Condition: good (used), machine/vehicle number: 13131, Year of construction: 2013, operating hours: 14,340 h, load capacity: 1,400 kg, lifting height: 3,400 mm, free lift: 1,570 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,130 mm, battery voltage: 24 V, fork length: 1,200 mm, front tire size: 18x7-8, rear tire size: 15x4,5-8, overall weight: 3,097 kg, Equipment: 3rd hydraulic function, enginetype: Electric, manufacturer: Still Serial Number: 516209D00196 Iedpeyld Rpofx Agysih Battery Details: 24V 5PzS 625Ah (aus 2015)

Condition: used, Year of construction: 2024, _____Basic equipment: Frame with ploughshare Hydraulic swivel device left-right Hydraulic installation with quick hydraulic couplings in accordance with DN10-ISO7241-1A Curbstone deflector left-right Three-point attachment plate CAT 2N, 2 and 3N in two mounting heights / for MG-150 to -210 CAT 1N, 1 and 2N OR municipal attachment plate F1, F2 in accordance with EN15432-1:2011 (formerly DIN 76 060, size 3) with lifting system for tension-free lifting and lowering Pressure relief valve Cylinder in strong design, double-acting Pendulum compensation up to 18° Adjustable skids Attachment device screwed Warning flags with holder Parking foot Municipal paint RAL 2011Special equipment:Equipment subject to surcharge:Euro mountWheelsLED lightingPU scraper barsAlso available as a three-point attachment!Price from 7,013.00 (net)The picture serves as an example, can contain special equipment.,Storage location:null Iiodpfx Agou Ebkmsyjh