Used Mikron A 22/0 for sale (1,15,881)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 617 138 66, input voltage: 380 V, type of input current: three-phase, total length: 5,000 mm, total width: 3,100 mm, total height: 2,000 mm, Rotary slitter for converting rolls into sheets Cardboard and corrugated paper Nedpjzi S Agsfx Ab Uewl Slitting width from 700 to 1500 mm Maximum roll diameter: 1500 mm

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Nwsdsv Uqb Nspfx Ab Uol

Condition: used, Year of construction: 2022, PANEL SAW Manufacturer: HOMAG Type: SAWTEQ B-200 Optimat HPL200/38/22 Year: 2022 Nwodpfx Ajzkmrfsb Uel With loading system

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. Nwjdpfxjzxn Nno Ab Uol In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate Njdpfxorcnm Ns Ab Ujwl -Transport dimensions: 270/260/H60 mm -Weight: 1.5 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080092, Used CNC horizontal 5-axis twin-spindle double-table machining center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of manufacture: 2011 Machine No.: 2080092 Weight: approx. 16,000 kg Technical data: - CNC horizontal machining center - 5-axis design - Twin spindle - Double table - Travel ranges: - X-axis: 600 mm - Y-axis: 600 mm - Z-axis: 510 mm - Rapid traverse: up to 45 m/min - Tool interface: HSK-A63 - Spindle speed: up to 17,500 rpm Equipment: Machine with standard accessories. Availability: Nsdpfx Ajz E Ddfob Uewl Available in the short term.

Year of construction: 2007, condition: excellent (used), Control: STE 328-89-1 1/2" complete TOX power pack: S75.160.200.12D table size: 996 x 695 mm installation height: 600 mm total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Nwodpfx Abep Aul Ao Usl Electrical connection 230 V

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 1,500 l, Equipment: documentation/manual, BRINOX 1,500 L Main Precipitation Vessel – 316L – Double Jacket – PED Module G – FAT 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBI-1500 Tag No.: BH6724-BH1001 Package 22 Serial Number: 1003457 Year of Manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Product Type: Main precipitation vessel / process vessel Nominal Volume: 1,500 liters Total Volume: 1,785 liters Empty Weight: approx. 866 kg Product-contact Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: Stainless steel Operating Pressure (Vessel): –1 / +3 bar Test Pressure (Vessel): 5.4 bar Operating Pressure (Jacket): as per design Temperature Range: –10 °C to +150 °C Pressure Vessel in accordance with PED 2014/68/EU Module G – Individual inspection Approval by notified body 0036 FAT – Factory Acceptance Test (08/2020) The vessel underwent a complete documented FAT at the BRINOX plant. Tests performed included: • Delta ferrite test of weld seams (conforming, no deviations) • Surface roughness check (Ra internal ≤ 0.8 µm, conforming) • Visual inspection of all product-contact surfaces • Pressure test as per specification • Documentation review • GMP deviation management (only non-critical points, fully resolved) • Measuring instruments with valid calibration certificates DESIGN • Double jacket for heating/cooling Nodpfxoykn Iij Ab Uewl • Horizontal design • High-grade pharmaceutical finish • Fully constructed from 316L stainless steel in product-contact areas • Mirror-polished internal surface • GMP-compliant, documented weld seams • Large manway with swing cover • Multiple clamp and flange connections • Spray ball / CIP connections • Prepared for instrumentation (pressure, temperature, sensors) • Insulated jacket with connections • Heavy-duty flange base • Lifting lugs and transportation version • Project-specific build for CSL Behring (Project SPHINX) CONDITION • Never in productive use • Direct from project surplus • Absolutely as-new interior • No corrosion • No signs of use • Industrial as-new condition • Immediately available DOCUMENTATION Complete project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity • TÜV inspection documents • PED Module G documentation • 3.1 material certificates • Welding documentation (WPS/WPQR) • Delta ferrite test protocols • Roughness measurement protocols • Calibration certificates for measuring instruments • GMP deviation protocols • Fully signed FAT protocols • Operating and maintenance manuals All documentation is complete and well-structured. • Pharmaceutical active substance processes • Precipitation and reaction processes • Buffer and solution preparation • Sterile liquid processes • Biotechnology • GMP production facilities • Ultra-pure media SPECIAL REMARKS This is a high-quality BRINOX process vessel in true pharmaceutical project quality, built for CSL Behring, with full PED Module G individual inspection, FAT 2020 documentation, and comprehensive GMP documentation. Not a standard tank, but certified project quality for sterile applications. Immediately available.

Condition: used, Technical data: Track width: 300 mm Max cutting height: 100 mm Njdsh E R Utjpfx Ab Uewl Max saw blade diameter: 300 mm Smooth feed regulation Automatic lubrication system Antireflection protection Culaga Extraction port: 2x160 mm Safety switch Power supply: 380 V Engine power: 22 kW Producer: Gabbiani Machine dimensions: Length: 1630 mm Width: 1800 mm Height: 1450 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Njdpfx Ajzvnfwsb Uewl Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: excellent (used), Year of construction: 2017, Separator, dust separator, welding fume filter, filter system, cartridge dust extraction system, cartridge filter unit, cartridge filter -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P Nedpfxeytgrxj Ab Uowl -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled Nwjdpfxjvw Radj Ab Usl -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l feed length max. 600 mm total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Nwedpfx Aexab R Ujb Uol Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 liquid ring vacuum pump. Please read the description carefully from beginning to end! Nsdpfsigqutox Ab Uowl The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Caution! The pump does not have explosion-proof certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made of the special Alloy 59 material! This alloy is used when conventional chrome-nickel steels are no longer sufficient in terms of corrosion resistance. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to wet chlorine gas), and waste incineration plants. Primarily, 2.4605 is used in the chemical industry, the pulp and paper industry, and in flue gas desulfurization plants. Excellent resistance to mineral acids such as nitric acid, phosphoric acid, sulfuric acid, and hydrochloric acid, and especially to sulfuric acid/hydrochloric acid mixtures. Typical applications are: -Equipment components for processes in organic chemistry with chloride-containing media, especially when catalysts based on chlorides are used. -Multipurpose plants in the chemical industry -Plant parts in the fine chemical and pharmaceutical industries -Scrubbers, heat exchangers, flaps, fans, and agitators for flue gas desulfurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for ship diesel engines -Components for seawater and concentrated brines -Equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -Sulfuric acid coolers -Piping in geothermal power plants -Components in flue gas desulfurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 volts Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings are new, and the mechanical seal has been refurbished by a specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: used, minimum range for wine: 15,000 litres/hour Nodpjz Ar Rqjfx Ab Uewl

Condition: good (used), Year of construction: 2005, Gardner Denver ES 22-10 Air Compressor with Pressure Air Receiver Tank. Manufacturer: Gardner Denver Model: ES 22-10 Nwjdpfx Asx Tctgeb Uol Compressor type: Rotary screw compressor Year of manufacture: 2005 Maximum pressure: 10 bar Motor power: 22 kW Rotational speed: 2780 rpm Weight: 628 kg Electrical supply: 400 V / 50 Hz CE marked Air Receiver Tank Manufacturer: Galvanoimis Oy Location: Pirkkala, Finland Year of manufacture: 2005 Tank specifications (according to nameplate): Maximum allowable working pressure: 10 bar Test pressure: 14.3 bar Volume: 1800 liters Maximum internal temperature: +50 °C Minimum internal temperature: −40 °C CE marked General Good maintenance and service history Air dryer included. 2 similar sets available. Industrial compressor package suitable for workshop or production use. Compressor and tanks manufactured in Finland. 📩 Contact for availability and delivery options.

Year of construction: 2018, condition: used, heat-shrink tube MA47 30/8 MA47  75/22 SRH2 56-16 Njdpfx Abjvimt Ds Uswl black 1   - 10 pieces per packaging unit 9 cartons on stock - price per packaging unit - weight per packaging unit approx. 3 kg

Condition: used, machine/vehicle number: 04 897, consisting of: Rinser 15 Nozzles Vacuum filler 16 Filling valves Nwedpfx Aezx Ddnjb Uol Screw capper 3 heads 22 mm screw cap

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 31 504, functionality: fully functional, cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, overall weight: 700 kg, plate height: 80 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum vertical cutting height: 2,200 mm Maximum horizontal cutting height: 2,100 mm Maximum cutting width: 5,300 mm Maximum cutting depth: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm MACHINE DETAILS Voltage: 400 V Current draw: 10 A Fuse rating: 16 A Power: 4.4 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 6,660 x 2,070 x 3,010 mm Weight: 700 kg FEATURES Nwodez Ea Imepfx Ab Usl CE marking Horizontal cutting Vertical cutting

Condition: good (used), Year of construction: 1997, High-speed EDM drilling machine, KOTON Type: EDM-KTH-202A.. In good condition with cooling and filter unit. Machine documentation available. Nedpowmn Szefx Ab Uowl See data sheet for specifications.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, workpiece weight (max.): 170 kg, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 220 mm, clamping length: 1,600 mm, Workpiece Clamping Diameter : ø 3 – 220 mm (Optional ø 310 mm) Workpiece Diameter: ø 3 – 400 mm Workpiece Length : 20 – 1.600 mm Centre Hole Diameter : ø 1 – 60 (Optional 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Njdpfx Aeym At Seb Uswl Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0BA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 3x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.4 kg/piece Nedpfswcyngox Ab Uowl

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0AA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 7x module available -Price: per piece Nwsdpfx Aewcyq Ijb Usl -Dimensions: 290/50/H480 mm -Weight: 6.3 kg/piece

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg Nwedpfxjrb E Hqe Ab Uol

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Nwsdpfx Absx D Skmo Usl Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours