LT module Simodrive 611

Siemens Mikron 6SN1123-1AB00-0BA1

Condition: as good as new (ex-display), Year of construction: 2024, General Tool magazine : 2x chain magazine with 32 stations each Rapid traverse in X/Y/Z : 48 m/min Traverse path X/Y/Z : 800/900/620 mm Spindle Technology : Direct drive Speed : 15.000 rpm Tool holder : HSK-A63 NC rotary table Technology : Swivel rotary table with torque drive, made by Kessler Duodeur Ng Ujpfx Afwsp A-axis : +/- 120 C-axis : 360° Clamping surface : ø800 mm Table load (max.) : 1,000 kg Workpiece dimensions (max.) : ø800 x 500 mm Equipment Distance measuring system : Direct (glass scales) in all axes Chip management : Chip conveyor Coolant management : IKZ system with filter and high pressure, 18 bar Workpiece measurement : Touch probe, Heidenhain TS 740 Tool measurement : Laser, BLUM Set-up mode : Electronic handwheel Additional equipment : Spindle cooler

Condition: new, Year of construction: 2021, !Machine like new, only 600 hours! HEIDENHAIN 640 Table 1300X700 X, Y, Z: X=1220 Y=710 Z=630 Spindle revolutions 60-10000 24 positions tool changer. Machine dimesnions 3200 X 3900 X 2490 Dsdpjwx Nkcsfx Afwjup Machine weight 9500 KG

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P Dujdpfx Afjw Dud Sewop YOM: 2004 *

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 182823025, functionality: fully functional, operating hours: 2,417 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 650 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 500 mm, workpiece width (max.): 500 mm, workpiece weight (max.): 400 kg, controller manufacturer: Heidehein, overall weight: 13,000 kg, controller model: TNC640, nominal power (apparent): 60 kVA, rapid traverse Z-axis: 1,417 m/min, rapid traverse X-axis: 1,417 m/min, rapid traverse Y-axis: 1,417 m/min, workpiece diameter (max.): 500 mm, operating hours of spindle: 2,417 h, Equipment: documentation/manual, Perfect running machine, 5 axle G6 Axile. Dsdpfxsvumzxo Afwoup Can be shown in running condition.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: A.1003260.01, Machine designation: Machining center Manufacturer: Hueller Hille Model: NBH230 Year built: 2009 Serial number: A.1003260.01 Control: Sinumerik 840D Travel paths: X-axis: 1200 Y-axis: 800 Z-axis: 1200 Tool holder: HSK100 Spindle speed: 10000 rpm Feed (X-Y-Z axis): 1-60000 mm/min Rapid traverse (X-Y-Z axis): 60m/min Rapid traverse (B-axis): 15 rpm Tool palette: 630x800mm NC rotary table: 0.001 deg Tool magazine: 3 cassettes of 50 tools each Measuring system: Direct with incremental scale Position uncertainty: 0.007mm Position deviation: 0.004mm Tool change time: 2.5-4.5 sec Chip-to-chip time: approx. 6.2 sec Pallet change time: 14.5 - 17 sec Connected load: 69 kW Dusdpfx Afowpi Ucowsp Compressed air system: 5 bar Coolant system: approx. 1250l Chip conveyor with inclined discharge: 1200 mm height

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 36/47 kW -Type: 6SN1145-1BA02-0CA1 -Dimensions: 310/200/H480 mm Dodpfjwcyk Uox Afweup -Weight: 15 kg

Condition: new, Year of construction: 2025, Z-MaT U630 5-Axis Simultaneous Machining Center Siemens ONE, 15" LCD screen Dual-torque direct drive Travel (X/Y/Z): 750/800/600 mm Rapid traverse (X/Y/Z): 36/36/36 mm/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 18,000 rpm, built-in Spindle taper: HSK63 (HSK100) Spindle motor: 30 kW, Siemens Air blast through the spindle Spindle air curtain Spindle oil cooler Double-arm tool changer, 30 tools (40/60/200 optional) Max. tool weight: 8 kg Max. tool length: 300 mm mm Max. tool Ø 75/120 Table Table diameter: Ø 630 mm Max. workpiece Ø 650 mm Max. table load: 850 kg T-slot (width x number x pitch): 18H8 x 7 x 80 mm Distance from spindle center to table surface: 120-720 mm A-axis travel (tilt): +-120 ° C-axis rotation: 360 degrees Max. rapid traverse A/C axes: 60/100 rpm A/C-axis encoder Standard accessories End of operation lamp 3-color status light Electric handwheel (MPG) Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air-operated (XYZ) Automatic Tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip flushing) Full splash guard Transformer: 400V, 50Hz Heat exchanger in the control cabinet Automatic shutdown Leveling bolts and blocks Dusdswku Evspfx Afwsp Tool box CE conformity Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 2728 x 3760 x 3726 mm Machine weight: approx. 19,500 kg Subject to error and prior sale A wide range of automation options are available

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 Duodpfxorb E Hbj Afwjp -Dimensions: 290/50/H480 mm -Weight: 6.8 kg

Condition: good (used), Steel Plate Length: 3800 mm Width: 1400 mm Thickness: 130 mm 17 T-slots T-slots dimensions: 42 x 27 mm x total height 40 mm External Slots spacing: 300 mm Dodpfeu Szupsx Afwsup Internal Slots spacing: 200 mm Holes diameter: Ø 40 mm Weight: 5 T

Condition: ready for operation (used), Year of construction: 2005, Measuring range X/Y/Z: 3000mm/1800mm/6000mm, measuring accuracy: ±(2.5 + L/300)µm. On-site inspection is possible. Dujdpjtt Sgmofx Afwep