Used Multi-Material Injection Molding Machine for sale (76,370)

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Podpsvygh Njfx Abpora Screw diameter: 30 mm Weight: 3,200 kg Available immediately from stock

Condition: excellent (used), Year of construction: 2006, ARBURG 320 C 400-170 injection molding machine Year of manufacture: 2006 Prjdpfx Abszw A Ehjpsa Clamping unit Clamping force: 400 kN (40 tons) Distance between tie bars (H × V): 320 × 320 mm Injection unit Screw diameter: 30 mm Maximum injection volume: 85 cm³ Maximum injection shot weight (PS): 77 g Maximum injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle clamping force: 40.6 kN Heating power: 9.4 kW Drive and power Pump drive power: 11 kW Total installed power: approx. 20.5 kW Dimensions and weight Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg Additional information The machine is equipped with a new screw, which is covered by a warranty.

Condition: excellent (used), Year of construction: 2010, ARBURG 370 U 600-290 injection molding machine Year of manufacture: 2010 Clamping unit Clamping force: 600 kN (60 tons) Distance between tie bars (H × V): 370 × 370 mm Dimensions of mounting platens (H × V): 510 × 510 mm Pjdpfx Aozw Azvobpora Minimum mold height: 200 mm Maximum daylight opening: 600 mm Opening stroke: 400 mm Ejector stroke: 125 mm Ejector force: 30 kN Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Injection shot weight (PS): 132 g Maximum injection pressure: 2000 bar Screw L/D ratio: 20 Screw torque: 450 Nm Maximum injection speed (PS): 140 g/s Number of heating zones: 4 Nozzle stroke: 240 mm Dimensions and weight Machine dimensions (L × W × H): 3.80 × 1.45 × 2.12 m Total weight: approx. 3,500 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN - Opening force: max. 120 kN - Opening stroke: max. 300 mm Prjdpszlfmksfx Abpea - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: excellent (used), Year of construction: 2015, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, injection pressure: 1,212 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Clamping force: 420 t Year of manufacture: 2015 Injection shot volume: 1,100 g Injection unit: 2300 Screw diameter: 70 mm Specific injection pressure: 1877 bar Injection volume: 1212 cc Injection shot volume: 1,100 g Pump motor power: 51 kW Cylinder heater power: 27 kW Screw L/D ratio: 20 Clamping force: 420 t Tool plate dimensions: 1200 x 1200 mm Distance between tie bars: 820 x 820 mm Ejector force: 96 kN Tool height: 380 - 825 mm Opening stroke: 770 mm Maximum platen distance: 1595 mm Psdpfx Abszwdzkspjra Ejector stroke: 230 mm Oil tank capacity: 78 kW Weight: 21000 kg Dimensions (m) L x W x H: 8.02 x 2.21 x 2.57 m Year of manufacture: 2015 Control system: NC5 Equipment: - Hydraulic core pull: 4 (+ 2 additional connections on the fixed platen) - Hydraulic cascades: 4 - Hot runner adjustment points (zones): 40 - Servo-drive hydraulic pump activeDrive (energy-saving) - Adjustable p+v injection in a closed-loop system - Wear-resistant screw, bimetallic cylinder - Automatic mold height adjustment - Clamping force adjustment - activeProtect mold protection - Switchover to pressure-based clamping (WID) - PDE process data logging, 100% monitoring - 8-circuit cooling water regulator - EUROMAP 67 interface - World Connect - remote service - DR 832 CNC robot and safety fencing included

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, clamping force: 27,000 kN, screw diameter: 60 mm, clearance between the columns: 6,30,570 mm, injection weight: 760 g, MACHINE IN PERFECT CONDITION, AVAILABLE FOR ANY INSPECTION. Pjdpjzw D Eijfx Abpsra

Condition: used, Year of construction: 2010, operating hours: 80,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, injection pressure: 1,946 bar, mold height (min.): 660 mm, ejector force: 69 N, ejector stroke: 180 mm, total length: 5,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 10,950 kg, The machine is currently in production, but it will need to be relocated soon as it is being replaced. Psdpfjzub Ntex Abpsra

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: VICTORY 330/80 TECH Baujahr: 2012 Pjdpsztp Ihefx Abpsra Schließkraft: 80 Tonnen Holmabstand: HOLMLOS Schnecken DN: 35 mm Max. Hubvolumen: 110 ccm³ Spritzteilgewicht 100 g/PS Steuerung: CC200 Ausstattung: -Roboter, Hersteller: SEPRO, Typ: AXESS -2 x Kernzüge -Ausblasventil -Förderband -Sicherheitszaun

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 173340, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, plate length: 715 mm, plate height: 715 mm, total length: 5,360 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,900 kg, Equipment: documentation/manual, ARBURG ALLROUNDER 520 C 2000-675, hydraulic injection molding machine for plastics, year of manufacture 1998. The machine has a clamping force of 2,000 kN (200 tons) and an injection unit with a 50 mm diameter screw. Technical data: Manufacturer: ARBURG Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN / 200 tons Injection unit: 675 Screw diameter: 50 mm Prsdpfxszw Hnye Abpja Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Condition: The machine was dismantled in perfect working order and is sold in its current condition. Operating hours are not available. The machine is available for viewing/inspection by appointment. Sale includes the injection molding machine only. The Cartesian robot and other components of the cell can be purchased separately.

Condition: excellent (used), Year of construction: 2008, JSW J350AD Injection Molding Machine Electric injection molding machine Year of manufacture: 2009 Type: Electric injection molding machine Total installed power: 30 kW Clamping unit • Clamping force: 3440 kN • Distance between columns (H × V): 730 × 730 mm • Minimum mold height: 300 mm • Maximum mold height: 670 mm • Maximum mold opening stroke: 700 mm Prjdpjzvwwvofx Abpja • Maximum ejector stroke: 152 mm • Maximum ejector pin height: 365 mm • Diameter of centering ring: Ø 160 mm • Dimensions of mold mounting plates (H × V): 1085 × 1085 mm Injection unit • Screw diameter: Ø 66 mm • Maximum injection shot weight for PS: 890 g • Maximum injection shot weight for PP: 767 g • Maximum injection speed: 160 mm/s • Maximum injection pressure: 1770 bar • Nozzle orifice diameter: 6 mm

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm Predpfszvwl Tex Abpja • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) Prsdpfszvwirsx Abpea • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. Podpfx Abszvm T Tepora MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Pjdpfx Abjzvm E Aepera Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Predpfxszvm Dls Abpoa Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 850-8100 MX injection molding machine – with servo drive Year of manufacture: 2013 Control system: MC5 Clamping system: hydraulic-mechanical, two-platen Drive: hydraulic with servo drive Design and control Pedpozvm A Ijfx Abpora Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions and 4 adjusting units mounted on the moving platen. PV – injection unit adjustment. MC5 PC (Pentium) control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with wear-resistant coating. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 8500 kN / 850 t Opening force: 560 kN Mold mounting plate dimensions (H × V): 1600 × 1600 mm Distance between tie bars (H × V): 1140 × 1140 mm Mold opening stroke: 1600 mm Minimum/maximum mold height: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force, front/rear: 200 / 100 kN Injection unit 8100 Screw diameter: 105 mm Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 4137 g Injection rate: 805 cm³/s Screw speed, standard / optional: 121 / 153 rpm Electro-hydraulic equipment Servo drive for the hydraulic system: YES Rated power of the pump motor: 110 kW Number of dry cycles according to EUROMAP 6: 965 cycles/h Oil tank capacity: 1500 l Dimensions and weight Machine dimensions (L × W × H): 10.81 × 2.92 × 2.57 m Net weight with control cabinet: 43.5 t

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s Prjdpfx Abozvmx Njpoa PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Psdozvmxpopfx Abpjra Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Psdpfxszvmpne Abpsra Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: used, Year of construction: 2008, operating hours: 37,000 h, For sale is an ARBURG ALLROUNDER 630 S 2500-800 ECO injection molding machine from 2008 with extensive automation and peripherals. Manufacturer: ARBURG Type: ALLROUNDER 630 S 2500-800 ECO Year of manufacture: 10/2008 Clamping force: 2,500 kN / 250 t Injection unit: 800 Control system: ARBURG SELOGICA The machine is equipped with an original ARBURG Multilift V select with a load capacity of 15 kg. The system also includes a complete safety enclosure, conveyor technology, and other peripheral devices. The machine is connected to the power grid and is currently in operation in a production facility. An inspection can be arranged by appointment. Technical specifications / Design: ARBURG ALLROUNDER 630 S 2500-800 ECO Year of manufacture 10/2008 Clamping force 2,500 kN / 250 t Injection unit size 800 Spindle diameter: 55mm Control system ARBURG SELOGICA Operating voltage 400 V / 3~ / 50 Hz Control voltage 230 V / 50 Hz Total connected load 81 kW Total rated current 145 A Automation: ARBURG Multilift V select Year of manufacture 10/2008 Load capacity 15 kg Control via SELOGICA pneumatic design X-/Y-/Z-axes complete safety enclosure part removal via conveyor belt Additional equipment / Peripherals: Piovan material conveying unit material hopper conveyor belt additional conveyor belt on the machine side several temperature control / tool circuits ARBURG temperature control unit extensive media connections complete automation cell. Psdpfxjzw D Hme Abpera An inspection of the machine is possible after prior appointment. Location: Greater Thuringia area _____ In addition, the following machines, not listed here, are also available: DEMAG Ergotech 50-270 – Year 2002 DEMAG ViVa 100-400 – Year 2000 DEMAG Extra 200-840 – Year 2007 DEMAG Ergotech 80-200 – Year 1995 DEMAG Ergotech 80-200 – Year 2001 ENGEL Victory 80/40 – Year 2006 DEMAG Ergotech 35/320-120 concept – Year 2002 _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are appropriate for their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Predpfszvgu Dox Abpea Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Predpfjzvdbuox Abpsa Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Power supply Voltage: 400 V Frequency: 50 Hz Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: unknown, type of input current: AC, nominal power: 100 kW (135.96 HP), Machine data: Machine type: Rubber - Injection molding machine Manufacturer: “RUTIL” (Italy) Type: RS “6300.600” First assembly and trial work performed in Dimitrovgrad (Ex Yugoslavia), in late 90s. Condition: Operational Note: Since the commissioning, the machine has not been used. Technical details: Input voltage: 380V Frequency: 50Hz Pjdpfx Abjzupp Ijpjra Power: 100kVa Filling volume: 8l

Condition: excellent (used), Year of construction: 2010, Engel Victory 1050/220 Tech with Wittmann W721 robot Year of manufacture: 2010 Injection unit: Screw diameter: 55 mm Shot weight: approx. 480 g Injection pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 0x0 mm Platen size: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Prodpfx Ajzpaukebpea Control: CC 200 - Touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 3 Control system with hot runner system x 30 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 12200 kg Length/Width/Height: 5.66x1.88x2.10 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic mode Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic mode Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the stationary platen Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic cooling water regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 21000 kg Prsdpszpat Tjfx Abpoa Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: Upon request