Used Paint Dryer Din 1539 300°C for sale (65,969)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, immediately available - according to DIN EN 1539 for solvent-based substances - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also available as fixed connection (fuse protection 35 or 50 A required) - incl. 1 piece mesh shelf - Weight 550 kg - Documentation Inspection in our warehouse by appointment. Fpedpfxsiq Uv Nj Anzsh Oven, ovens, industrial oven, circulating air oven, chamber circulating air oven, tempering oven, heat oven, drying oven, conditioning oven, paint dryer, solvent oven

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Recirculating Chamber Furnace, electric, 12-month warranty, Program controller upgrade to the new Jumo Dicon, fan bearings newly replaced, new photos coming soon -Capacity: 8,000 liters -Tmax: 300°C -Internal dimensions (W x D x H): 2000 x 2000 x 2000 mm -External dimensions (W x D x H): 2559 x 2578 x 2665 mm -Fresh air supply and exhaust with adjustable damper -Optional exhaust fan and frequency inverter available on request -Safety thermostat -Program controller upgrade to the new Jumo Dicon Touch: 10 programs, each 50 segments, with network interface -Recirculating fan bearings newly replaced -Double doors Fpodoy Am R Ujpfx Anzeh -Heating capacity: 36 kW -Total power: 39.8 kW -Power supply: 400V, 3-phase, 50 Hz -Weight: 1,300 kg -Documentation, CE declaration -Electrically tested and supplied with current DGUV measurement protocol Inspection at our facility by appointment at any time. Oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, temperature chamber, recirculating oven, chamber furnace, preheating furnace, chamber recirculating furnace, tempering oven, chamber dryer, drying cabinet

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 48 V, total height: 770 mm, total length: 1,220 mm, total width: 500 mm, Tested forklift battery for your forklift - 48V 6PZS 930Ah - DIN C + 1 year warranty + includes Aquamatic filling system + includes end discharge cables & REMA 320 plug (other plug types can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,220 mm Width: 500 mm Height: 770 mm Weight: approx. 1,350 kg Compatible with the following models and others: Linde A (1250) - 5022-00 Linde A - 5224-00 Linde R 16 - 1120-00 Linde R 16 - 1120-00 - front battery change Linde R 16 HD - 1120-00 Linde R 16 HD - 1120-00 - front battery change Linde R 20 - 1120-00 Linde R 20 - 1120-00 - front battery change Linde R. 20 - 1122-00 Fpjdpfsy Rnttsx Anzoh Linde R 20 F - 8923-00 Linde R 20 F - 8923-00 - side battery change Linde R 20 G - 1120-00 Linde R 20 G - 1120-00 - front battery change Linde R 20 HD - 1120-00 Linde R 20 HD - 1120-00 - front battery change Linde R 20 W - 1120-00 Linde R 20 W - 1120-00 - front battery change Linde R 25 - 1120-00 Linde R 25 - 1120-00 - front battery change Linde R 25 F - 8922-00 Linde R 25 F - 8922-00 - side battery change Linde R 25 F - 8922-00 - vertical battery change Linde R 25 F - 8923-00 - side battery change Linde R 25 F - 8923-00 - vertical battery change Linde R 25 W - 1120-00 Linde R 25 W - 1120-00 - front battery change Still FM 20 Still FM-X 20 Still FM-X 25 Jungheinrich ETV 214 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV 460 Toyota/BT VR 1.25 Toyota/BT VRE 150 Crown ESR 4000-1.6 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5260 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UHX 200 Caterpillar NR2042H Caterpillar NR20NH Caterpillar NR25N2X Hyster R2.0H Hyster R2.0HD Hyster R200HD Mitsubishi RB14-25 Mitsubishi RB20NH Yale MR 25 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,214 mm, total width: 420 mm, Tested forklift battery for your forklift - 48V 5PZS 625AH - DIN C + 1 year warranty + incl. Aquamatik + incl. terminal discharge leads & REMA 320 connector (other connectors available on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length 1,214 mm Width 420 mm Height 627 mm Weight: approx. 890 kg Suitable for the following models and others: Genkinger EG30-SO Nichiyu FBRW20 Common battery sizes available, feel free to inquire. Fpodpfxey Rnpne Anzoh Transport possible.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 782 mm, total length: 1,220 mm, total width: 424 mm, Tested forklift battery for your forklift - 48V 5PZS 775AH - DIN C + 1 year warranty + includes Aquamatik (automatic watering system) + includes end connectors & REMA 320 plug (other plug types available upon request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) Fodey Rnn Djpfx Anzsph + Year of manufacture: 2024 Dimensions: Length 1,220 mm Width 424 mm Height 782 mm Weight: approx. 1,150 kg Suitable for the following models and others: Atlet REACH TRUCK Atlet UHD 250 Atlet UHS Atlet UMS 160 Atlet UND 140 Atlet UNS 200 Caterpillar N Caterpillar NR16N2H Caterpillar NR16NH Caterpillar NR20N2H Caterpillar NR20NH Caterpillar NR20NHA Caterpillar NR25N2X Caterpillar NR25NH Crown ESR Crown ESR 3020-1.4 Crown ESR 3020-1.6 Crown ESR 3020-2.0 Crown ESR 4000-1.4 Crown ESR 4000-1.6 Crown ESR 4000-2.0 Crown ESR 4500 Crown ESR 4500-1.4 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5000-2.0 Crown ESR 5260 Crown ESR 5260-1.4 Crown ESR 5280 Crown ESR 5280S-1.6 Crown ESR 5280S-2.0 Hyster R1.0 Hyster R1.4 Hyster R1.4H Hyster R1.6 Hyster R1.6HD Hyster R2.5 Jungheinrich ETV Jungheinrich ETV 214 Jungheinrich ETV 216 Jungheinrich ETV 320 Jungheinrich ETW 216 Linde A (1250) – 5022-00 Linde A – 5224-00 Linde R 14 – 1120-00 Linde R 14 – 1120-00 – frontal battery change Linde R 14 G – 1120-00 – frontal battery change Linde R 14 HD – 1120-00 Linde R 14 HD – 1120-00 – frontal battery change Linde R 16 – 1120-00 Linde R 16 – 1120-00 – frontal battery change Linde R 16 – 115-00 Linde R 16 AS – 1120-00 – frontal battery change Linde R 16 AS 1270 – 1120-00 Linde R 16 G – 1120-00 – frontal battery change Linde R 16 HD – 1120-00 Linde R 16 HD – 1120-00 – frontal battery change Linde R 16 S – 115-00 Linde R 16 S ACTIVE – 115-12 Linde R 20 – 1120-00 Linde R 20 – 1120-00 – frontal battery change Linde R 20 – 115-00 Linde R 20 G – 1120-00 – frontal battery change Linde R 20 HD – 1120-00 – frontal battery change Linde R 20 W – 1120-00 – frontal battery change Linde R 25 – 1120-00 Linde R 25 – 115-00 Linde R 25 F – 8923-00 Linde R 25 W – 1120-00 – frontal battery change Mitsubishi RB14 Mitsubishi RB14-25 Mitsubishi RB14N Mitsubishi RB16 Mitsubishi RB16NH Mitsubishi RB25N2X Still FM 14 Still FM 17 Still FM 20 Still FM-4W 25 Still FM-X 12 Still FM-X 14 Still FM-X 17 Still FM-X 20 Still FM-X 25 Yale MR 16 Common battery sizes are available – please enquire. Transport possible.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 353 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN B + 1-year warranty + Includes aquamatic system + Includes end cell connectors & REMA 320 connector (other types available on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,035 mm Width: 353 mm Height: 784 mm Weight: approx. 770 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde E 15 C - 322-00 Linde E 18 Z - 322-00 Linde R 10 BN - 1120-00 Linde R 10 CN - 1120-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal changeover Linde R 12 BN - 1120-00 Linde R 12 CN - 1120-00 Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal changeover Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 CN - 1120-00 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - frontal changeover Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 16 AS 1140 - 1120-00 Linde R 16 CN - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal changeover Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N HD - 1120-00 - frontal changeover Linde R 16 SN - 115-08 Linde R 16 SN - 115-12 Fsdpfx Aney Rnk Eezsph Linde R 20 - 1120-00 Linde R 20 W - 1120-00 Linde V - 5213-00 Linde V 10 E - 146-00 Linde V MODULAR - 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Common battery sizes available – please inquire. Transport can be arranged.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 782 mm, total length: 1,220 mm, total width: 352 mm, Tested forklift battery for your truck - 48V 4PZS 620Ah - DIN C + 1 year warranty + Includes Aquamatik (automatic filling system) + Includes end cell connector & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity test protocol included on delivery) + Year of manufacture: 2024 Dimensions: Length 1,220 mm Width 352 mm Height 782 mm Weight: approx. 960 kg Suitable for the following models and many others: Linde A (1250) - 5022-00 Linde A - 5224-00 Linde R 10 B - 1120-00 Linde R 10 B - 1120-00 - front battery change Linde R 12 B - 1120-00 Linde R 12 B - 1120-00 - front battery change Linde R 12 C - 1120-00 Linde R 14 - 1120-00 Linde R 14 - 1120-00 - front battery change Linde R 14 B - 1120-00 - front battery change Linde R 14 G - 1120-00 - front battery change Linde R 14 HD - 1120-00 Linde R 14 HD - 1120-00 - front battery change Linde R 14 W - 1120-00 Linde R 14 W - 1120-00 - front battery change Linde R 16 - 1120-00 - front battery change Linde R 16 AS - 1120-00 - front battery change Linde R 16 AS 1270 - 1120-00 Linde R 16 B - 1120-00 - front battery change Linde R 16 C - 1120-00 Linde R 16 G - 1120-00 - front battery change Linde R 16 HD - 1120-00 Linde R 16 HD - 1120-00 - front battery change Linde R 16 S - 115-00 Linde R 16 S ACTIVE - 115-12 Linde R 16 W - 1120-00 Linde R 16 W - 1120-00 - front battery change Linde R 20 - 1120-00 Linde R 20 - 1120-00 - front battery change Linde R 20 - 115-00 Linde R 20 G - 1120-00 - front battery change Linde R 20 G - 115-12 Linde R 20 S - 115-12 Linde R 20 W - 1120-00 - front battery change Still FM 14 Still FM 17 Still FM-X 12 Still FM-X 14 Still FM-X 17 Still FM-X 20 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV 216 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV C 16 Toyota/BT RRE 200 Crown ESR Crown ESR 3020-1.4 Crown ESR 3020-1.6 Fpsdpfx Anoy Rniuozeh Crown ESR 3020-2.0 Crown ESR 4000-1.4 Crown ESR 4000-1.6 Crown ESR 4000-2.0 Crown ESR 4500 Crown ESR 4500-1.4 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5000-2.0 Crown ESR 5240 Crown ESR 5240-1.4 Crown ESR 5260-1.4 Crown ESR 5260-1.6 Crown ESR 5260-2.0 Crown ESR 5280S-1.6 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UMS 160 Atlet UMS 200 Atlet UNS 140 Caterpillar NR14/16 Caterpillar NR14N Caterpillar NR14N2S Caterpillar NR16N Caterpillar NR16N2HS Caterpillar NR20NH Hyster R1.6 Mitsubishi RB14N Mitsubishi RB14N2S Mitsubishi RB16N Mitsubishi RB20N2H Mitsubishi RB20NH Nichiyu FBR14-75B OM-Pimespo-Fiat XR 14 AC Rocla REACH MAST TRUCK Yale MR 14 Yale MR 16 Common battery sizes available on request. Transport possible.

Condition: excellent (used), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Fpodpoyzzm Iofx Anzsh Load per shelf: 30 kg Maximum total load: 300 kg Interior: Stainless steel, all-around heating External dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Regulator: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side with 2 feed-throughs approx. 12 cm diameter each Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data, information is non-binding!) If you have any further questions, we are happy to assist you by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original datasheets or obtaining information directly from the manufacturer.

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm Fpsdpfswyblzex Anzsh 10000 rpm Parts shown by hand not come.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Fpodpfx Answhvrrezeh Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: new, functionality: fully functional, empty load weight: 265 kg, maximum load weight: 1,035 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,950 mm, loading space width: 1,630 mm, Year of construction: 2026, MARTZ Unilader 300 C 1.3T NEW VEHICLE Internal dimensions: 295 cm x 263 cm Gross vehicle weight: 1,300 kg Payload: 1,035 kg Braked single-axle low-loader 1,300 kg KNOTT axle with inertia brake, automatic reverse function, and handbrake Bolted and galvanized steel frame Folding drawbar With hydraulic assistance 15 mm thick, robust, and anti-slip phenolic plywood flooring 13-pin electrical system Plastic mudguards Support wheel 13-inch M+S tires Multiple lashing points Front position lights Rear lights with reversing light, rear fog light, and triangular reflectors Folding license plate holder 2x wheel chocks Optional accessories: - 100 km/h upgrade - Rear support stands - 40 cm steel side panels - Extension side panels - Mesh sides - Drive-on rear ramp - Motorcycle wheel rail - Crank handle for infinitely adjustable tipping angle - Flat tarp with or without hoops - High tarp - Coarse or fine mesh net - Spare wheel with holder Further accessories available on request! Photos are for reference only and may show optional accessories at additional cost. Plus vehicle registration document and shipping to Gera €150 net Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and immediately available for collection. Workshop open weekdays from 8:00 am - 5:00 pm for all types of repairs. Specialist for axle repairs, including caravan axles. Fpodpfxsww Eg Re Anzeh Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get professional advice by phone, visit our website, or drop by directly.

Condition: excellent (used), Binder Type: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality - Even heat distribution - Made in Germany - Ideal for professional applications Capabilities: The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C Fpsdpfxjynh E Aj Anzsh - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website Fodpfx Aeir U H Eenzjph

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: Fpsdpfx Aneyma Nwozjh at 70 °C (W) 172 at 150 °C (W) 429 at 300 °C (W) 951 max. 300°C Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: good (used), Screws, eye bolts Fsdpfx Aneyhmcaszjph -Manufacturer: Golfaro, M30 C15 eyebolts -Grade: Steel, galvanized -Quantity: 109 eyebolts available -Price: per piece -Dimensions: 150/110/65 mm -Weight 1.7 kg/pc.

Condition: used, Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm Fpodpfx Aneirukuezjh -Transport dimension: 330/260/H140 mm -Weight: 1.3 kg

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven -Manufacturer: Heraeus, drying cabinet universal oven type T 6120 with viewing window -Useful space: BTH 550/370/495 mm / 100 liters -Heating power: 2.2 kW -Nominal temperature: 300°C -Voltage: 230 V Fodpfx Aswbc U Hjnzeph -Individual components: digital temperature controller, adjustable ventilation flap -Dimensions: 940/585/H720 mm -Weight: 72 kg

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame Fsdpfxjivql Sj Anzjph -Manufacturer: Fibro stamping tool column frame -Type: 201.31.056. DIN 9822 C 100x80 -Die stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet -Manufacturer: Küppersbusch, Electrode dryer type SET-4 -Nominal temperature: up to 300°C -Usable space: WDH 140/140/460 mm -Voltage: 220 V -Power: 0.9 kW -Contents: see photos Fpsdpfx Anox Ir Trozeh -Dimensions: 385/365/H695 mm -Total weight: 19.3 kg

Condition: good (used), Year of construction: 2001, operating hours: 26,385 h, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Table size: 905 x 2,000 mm Max. table load: 1,400 kg Rapid traverse X/Y/Z-axis: 30 m/min Feed rate: 1 - 8,000 mm/min Main spindle Speed range: 10,000 rpm Spindle taper: SK 40 Main drive power: 18.5 kW Tool magazine Number of tool pockets: 30 Max. tool diameter: 80 mm Max. tool diameter with adjacent slot empty: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg MACHINE DETAILS Total connected load: 22 kVA Machine weight: approx. 10,500 kg Machine dimensions (L x W x H): approx. 4.50 x 3.50 x 3.10 m EQUIPMENT - ICS (internal coolant supply) - Manuals SOFTWARE - EIA Fpjdpowtfv Dsfx Anzeh - Spiral - Eia 3D comp. - Rotation - Geometric - Scaling - Ext-Data i/O - Shape comp. - Thread - Inverse Time - Auto TLM - Comparison Stop - G54.1 - Sync. Tap - Gebn Dsv R Ezceztw Tebn (original, unable to translate, probably software module code) - G00 Slope Const. - Variable 600 Sets - Navigation - Eia Helical Tap Cycle - Mazatrol Helical - Mazatrol Planet Tap

Condition: excellent (used), Here we offer a chamber circulating air furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 Fpsdpfxsigg Eqs Anzsh 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 13 kVA Heating power: 12 kW Nominal temperature: 300°C weight: 400 kg Type: KU 300/09-06-06 K111183701 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Heraeus heat and air circulation drying oven. Heraeus heating and air circulation drying oven up to 300 ° C Manufacturer / type: Heraeus UT 6060 Properties: Temperature: 300 ° C Net volume: 52 litres Weight (empty): 53 kg Internal dimensions: Depth 403 mm, width 340 mm, height 380 mm External dimensions: Depth 744 mm, width 535 mm, height 552 mm Nominal voltage 230 v, rated frequency 50/60 Hz, rated current 6,8A, output 1, 50kW Including 2 deposits Fpodpfxed Hpv Ae Anzsh Type: UT 66060 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: excellent (used), Thermo Scientific Vötsch Type: UT 6420 For sale is a professional laboratory and industrial drying oven / heating cabinet, Thermo Scientific / Vötsch Industrietechnik – Type UT 6420. This unit is suitable for drying, heating, tempering, and heat treating materials and components at precisely controlled temperatures up to 300 °C. Typical areas of application include laboratory, industry, workshop, research, electronics, and materials testing. The stainless steel chamber ensures uniform heat distribution and is designed for continuous operation. Chamber: Stainless steel with insertion racks External dimensions (approx.): 170 × 70 × 80 cm (H × W × D) Technical specifications: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Type: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Protection class: IP20 Weight: approx. 200–230 kg Condition: used Scope of delivery: (see photo) (Specifications are subject to change and errors; details are non-binding!) Fjdpfx Anjx Hf Uajzsph For further questions, we are happy to assist you by phone.

Year of construction: 2023, condition: as good as new (ex-display), Parker Zander Adsorption Dryer K-MT6 cold regenerated, with multitronic-plus control with pressure dew point control with pre- and post-filter Exhibit: Parker / Zander Adsorption System K-MT6 YOC 2023 Technical data: Fsdpfjm Twwbex Anzjph Compressed air supply: BSPT G 1/2" Flow: 0.93 m³/min at pressure dew point -40°C Other models and designs on request ! Max. pressure 16 bar Min. pressure 5 bar Compressed air inlet temperature: 25° to 50°C Ambient temperature 1.5°C to 50°C Installation site: frost-free indoor installation in a non-aggressive atmosphere. Mains voltage: 230 V , 50-60 Hz Protection Class: IP65 Dimension: Width: 493 mm Depth: 300 mm Height: 1203 mm Weight: 48 kg Visit our shop. We always have a large selection of compressors and dryers in stock.

Condition: used, Year of construction: 1993, functionality: fully functional, Manufacturer: Sandingmaster (Holland) Model: SCSB3-1300 Year: 1993 Material: solid wood panel Working width 1300 mm Working height 150 mm Motor contact roller 25 HP Motor fine sanding pad 15 HP Feed motor 1/1,75 HP Feed speed 7 and 14 m/min 23 and 46 ft/min Standard hardness contact roller 80° shore Dimensions sanding belts 1900 x 1330 mm Fpsdpfx Anexwwkrozoh Weight ~4000 kg