Drying cabinet / heating cabinet

Thermo Scientific Vötsch UT 6420 300 °C

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) Kedsx Dkmgspfx Ahaodl • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control System | Excellent Condition | CE-Compliant! Technical Data: - Year of manufacture: 2015 | Machine No. 610398 - Milling table clamping surface: 800 x 425 mm - Clamping slots: 6 - Slot width: 14 H7 - Slot spacing: 63 mm - Maximum load: 300 kg - Spindle speed range: 1 – 4500 rpm - Infinitely variable feed: 0–2000 mm/min - Rapid traverse (X and Y axis): 5000 mm/min - Z axis: 4000 mm/min - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Power rating at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control system - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: Offered here is a tool milling machine Kunzmann WF 600M equipped with a Heidenhain TNC 128 control system. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for quick and easy data entry, such as various drilling cycles, tapping, bolt circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface facing. Kedpfxowz Eu No Ahajdl This universal milling machine is in like-new condition. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal is very simple by swiveling the vertical head to the side. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested at our facility. You are welcome to view and test the Kunzmann under power on-site.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Multivac T300 Traysealer year of construction 2013, 2x moulds 1x 258 x 173 mm 1x 177 x 138 mm. Including tool racks spareparts and built in vacuum pump. Ksdpfoxrnnwox Ahasdl

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Kodjiknv Eopfx Ahaodl

Condition: excellent (used), Heraeus Incubator Incubator Here we offer an incubator. Volume 30 litres Manufacturer: Heraeus Outer dimensions: height 552 mm x width mm 552 x depth 610 mm Interior dimensions: height 231 mm x width mm 352 x depth 370 mm Nominal temperature: 50 °C Connection: 220V 50/60 Hz 1,00 A 0,22 kW Weight: approx. 41 kg Type: B 6030 Condition: used / used Scope of delivery: (see picture) Kodpfx Ahog Aiq Noajdl (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Kdjdepu R Ncspfx Ahaol Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: excellent (used), 3-phase direct current spot welding machine DALEX type PMS 11-4 G 3 Rated power at 50 % ED: 96 kVA Sec. short-circuit current: 44.5 kA Sec. open-circuit voltage: 4.72 V Electrode force: 100-600 daN arm reach: 550 mm with add-on control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 weight: 740 kg Kdedehmvawspfx Ahaol

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine type PMS 11-4 G3 in 3-phase DC version - Specifically designed for welding aluminum sheets - Low usage, completely checked and cleaned - Fully functional, ready for demonstration - Rated voltage 400V/50Hz - Rated power 96 kVA - Welding current 23 kA - Connection cable cross-section 10 mm²/phase Kdjdpeh N Sc Ejfx Ahaol - Fuse protection 63A - Throat depth 1050 mm (!!) - Electrode arm diameter 60 mm - Electrode holder diameter 30 mm - Electrode force 600 daN - Stroke 65+25 mm - Electrode taper MK2 - MPS 8043/1 control unit from Harms & Wende with current rise and pulse function – operating manual included - 2-stage foot switch according to regulations (UVV) - Main machine switch - Pneumatic service unit - Weight approx. 830 kg - Complete documentation available: wiring diagram, compressed air diagram, and cooling-water circuit - VAT deductible - Delivery ex stock Dresden approx. 4 days within Germany – export may take longer! On-site commissioning available for a fee, billing based on actual effort. The unit is located in Dresden, near the A17 motorway, and can be inspected and demonstrated by appointment.

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Kdodpfxsuk I Etj Ahajl

Year of construction: 2025, condition: as good as new (ex-display), ENR 008 – Air-cooled Chiller Kjdpfxjfy Rykj Ahasdl Cooling capacity: 7.9 kW at supply/return temperatures of 7/12°C and an ambient temperature of 35°C Compact design with coaxial evaporator for efficient heat transfer Internal P3 pump for reliable circulation of cooling water Buffer tank with 50 l water volume for short-term load balancing Speed-controlled fans for demand-based cooling and reduced energy consumption Control: compatible with common control systems, ideal for easy integration Suitable for smaller cooling applications, such as the plastics industry