Used Schwan Optimal 300+200 for sale (29,469)

Condition: used, Centerless grinders SASL 125 1A, 200x300, 125x250, KCH 63 Godpfx Aocup D Njp Djkc

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: * Manufacturer: Bohm Wiedenmann GmbH * Model: Super 300 1.5 * Year of manufacture: 1998 * Working width: 1.5 m * Permissible total weight: 1450 kg * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h Godpozmhz Tefx Ap Dokc * PTO shaft * Large collection container * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos.

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. Gkodey A Ewtspfx Ap Dec 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: refurbished (used), functionality: fully functional, turning diameter over cross slide: 370 mm, spindle bore: 105 mm, turning diameter: 600 mm, center height: 300 mm, turning length: 1,500 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 20 rpm, type of input current: three-phase, GORNATI LEGOOR 300 parallel lathe Overhauled and fully refurbished Guides re-ground Guides, lead screws, bed, etc., restored New electrical system. OMAP self-centering chuck with double guide. Tool turret with 5 tool holders. Tailstock. Center height 300 mm Gkjdpjzzq Nvsfx Ap Dsc Distance between centers 1,500 mm Diameter over bed 600 mm Diameter over cross slide 370 mm Diameter in the bore 890 mm Bar capacity 105 mm 16 speeds Spindle speed 20-1,500 rpm.

Condition: used, Year of construction: 2003, Maximum pushing speed 120 mt/min Blade diameter 500/550 mm Worktop height 900+-20 mm Compressed air consumption Gjdpfjzqg R Iex Ap Djkc 1200 nl/min 6 atm Minimum installed power 10 kW Suction air velocity 2000 m3/h 45 mt/sec Output with 8 ejectors

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) Gsdjzhpg Topfx Ap Dekc delivery time: on request terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2024, load capacity: 300 kg, Equipment: foot remote control, rotational speed infinitely variable, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Gksdpevbrqxefx Ap Dec Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tools from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident lighting via LED ring light; 4 sectors and 1 ring individually switchable Precision measuring stage (X and Y axes) Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow toggle Camera-based measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and handy – high performance Rapid operation with maximum measurement precision Special features Gkedpfx Ajzpwd Nep Dsc Incl. Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels particularly with stamped parts, plastic and rubber components, milled parts, tools, profiles, and PCBs. Key highlights of the measuring microscope include camera-based measurement data acquisition, rapid operation, and high precision. Another notable feature is the precise edge detection in transmitted and incident light using smart image processing algorithms. Despite its high performance, the WM 1 300 CNC is compact and handy, measuring 900 mm × 950 mm × 950 mm. Please feel free to contact us if you have any further questions!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NL301GL1022, travel distance X-axis: 280 mm, travel distance Z-axis: 1,370 mm, overall weight: 11,500 kg, The Mori Seiki NL3000MC/2000 is a high-precision, robust CNC turning and milling center designed for heavy-duty machining and the processing of long workpieces. The model designation indicates the NL series (class 3000), and the MC version signifies that the machine is equipped with driven tools (milling) and a C-axis for milling operations. Equipment: -Single spindle, three-jaw chuck, 10-station tool turret, chip conveyor Control: -MSX-850 III (NL301GL1082) Special features: Gkodpfxoz N Emwj Ap Djc -BMT technology (Built-in Motor Turret): The tool motor integrated directly into the turret minimizes vibrations and heat generation, resulting in significantly improved milling performance. -High stability: The massive flat-bed design provides excellent damping properties for hard materials and deep cuts. Accessories: -Work bench (1-door, 4 drawers), telescopic drawer cabinet (7 drawers), standing table, shelf Contents: various hand tools, various tool holders, machine accessories

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tool from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident light illumination via LED ring light, 4 sectors and 1 ring individually switchable Precision measuring table in X and Y axes Gsdpeyuut Tsfx Ap Djkc Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow switching Camera-supported measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and portable – powerful performance Easy handling with maximum measurement accuracy Special features Including Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels especially in the measurement of stamped, plastic, rubber and milled parts as well as tools, profiles, and PCBs. Key features of the measuring microscope include camera-assisted data acquisition, quick operation, and its high precision. Of particular note is the precise edge detection in transmitted and reflected light, powered by smart image processing algorithms. Despite its powerful capabilities, the WM 1 300 CNC remains compact and handy with dimensions of 900 mm × 950 mm × 950 mm.

Year of construction: 1978, condition: excellent (used), I sell the top router for copy milling Žičnica FPŽX 300/200, Made in Jugoslavia in Ljubljana, Slovenia. Godpfed Nzfcex Ap Dskc

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Gkjdpfx Apetu T I Ue Dec Loading possible Request more information

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). The visual condition is very good, with only minor signs of normal use. Technical specifications: • Manufacturer: DELO • Model: DELO-UNIPRO • Part number: 95 200 01 • Serial number: 1501 UNI 648 • Power supply: 100–240 V AC • Frequency: 50–60 Hz • Power consumption: 40 W Gkodpfx Apozrv Hze Dsc • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Godpfx Apowm Iy Eo Dskc Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - Main spindle 7.5 Kw / 11kw - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Year of manufacture: 2008 Technical data - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit Gkedpfx Apezux Tis Dsc - Vertical drilling unit - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats - IMA Wop software + office license

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside Gsdpfx Aeymf Rtop Dekc • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 2300-12000 MX Injection Moulding Machine Year of manufacture: 2019 🏭 Manufacturer: Krauss Maffei Machine type: KM 2300-12000 MX Clamping system: fully hydraulic Control: MC5 – industrial computer with integrated 19” colour touchscreen display Gedpfxewxdrbj Ap Dokc 🔧 Clamping unit Clamping force: 23,000 kN Maximum mould opening force: 1,610 kN Platen dimensions (W × H): 2,850 × 2,450 mm Tie bar clearance (W × H): 2,020 × 1,620 mm Opening stroke: 3,000 mm Mould height (min.–max.): 800 – 1,800 mm Maximum daylight: 3,800 mm Ejector stroke: 400 mm Ejector force: 400 / 200 kN 🧩 Injection unit Screw diameter: 105 mm Injection pressure: 2,296 bar Shot volume: 5,195 cm³ Shot weight (PS): 3,689 g Screw speed (standard): 103 rpm Plasticising rate (PS): 241 g/s Nozzle radius: 28 mm Nozzle orifice: 8 mm ⚡ Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 93 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 8.2 s Oil tank capacity: 2,440 l 📐 Dimensions and weight Net weight with control cabinet: 121 t Machine dimensions (L × W × H): 14.42 × 4.39 × 3.44 m

Year of construction: 2004, condition: good (used), Spritzgiessmaschine bis 5.000 KN Machine type: Krauss Maffei KM 2300-12000 MC Year: 2004 Control: CNC MC4 Working hours: 93.900 h SPECIFICATIONS Closing unit Closing force: 23,000 kN Maximum tool opening force: 1,420 kN Thrust force of the movable plate (opening): 227 kN Clamping force of the movable platen (closing): 203 kN Tool clamping area (H x W): 2,830 mm x 2,400 mm Stand spacing (H x W): 2,000 mm x 1,600 mm Tool opening stroke: 2,600 mm Gkedpfx Aozi Sfzop Dec Min. tool height: 1,100 mm Maximum tool height: 1,800 mm Maximum tool spacing: 3,700 mm Hydraulic ejection stroke: 350 mm Ejector force (forward/reverse): 415/115 kN Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,389 bar Displacement: 8,588 cc Projectile weight (PS): 7,815 g Injection capacity: 1,019 cc/s Screw speed: 113 rpm Maximum plasticizing capacity: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Rated power of the pump motor: 132 kW Installed heating capacity: 997 kW Adjustable cylinder heating zones: 7 Number of drying cycles: 350 per hour Tank capacity: 2,500 L Dimensions and Weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total weight of the machine: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 Robot X-Axis: 2.000 mm Y-Axis: 3.000 mm Z-Axis: 5.000 mm

Year of construction: 2000, condition: used, Punching machine Premium quality Gsdpfx Aog Dgyxep Djkc HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²

Condition: used, Year of construction: 2002, Overview This SMI TF 300 tray forming machine, manufactured in 2002, is designed for the automatic forming of trays in beverage packaging lines. The machine was previously used for packing 4x6x0.5L sixpacks into trays and achieves a capacity of up to 23 packs per minute, making it suitable for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production, the machine was dismantled in calendar week 11/2026 and is currently in storage. Gkodpfx Ajy Hi U Dsp Dec Technical data - Manufacturer: SMI - Model: TF 300 - Machine type: Tray forming machine (tray erector / tray packer) - Year of manufacture: 2002 - Capacity: approx. 23 packs per minute - Application: Tray packing of multipacks (e.g. 4x6x0.5L sixpacks) Equipment - Automatic tray forming system - Suitable for beverage multipack tray applications - Integration capability into existing packaging lines

Condition: excellent (used), Year of construction: 2006, Arburg 570C 2200-1300 / Hybrid Machine Year of manufacture: 07.2006 Injection unit: Screw diameter: 55 mm Shot weight: 469 g Godpfx Aoz Ip U Usp Dskc Injection pressure: 2380 bar Dosing volume: 558 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of the platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Controller: SELOGICA Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Controller with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving The injection unit is driven by a servo motor, which is controlled by an inverter Dimensions: Weight: 9300 kg Length/Width/Height: 5.16x2.06x2.39 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Gedpfxoz Rmrdo Ap Dskc Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.

Condition: used, Year of construction: 2009, Colour: White - Details: - └ Description: Exclusive Makor Gkjdpewnh I Eefx Ap Dec - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MKR30029343 - Rail present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Gjdpfxetu True Ap Dekc Output: 311Kw Мы говорим по русски! Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Gkodpfsz I A Ubox Ap Dsc Weight: approx 3 T