Used Screw Feeder For Compounds for sale (10,771)

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available Bdsdpfx Ash Eydusf Aeh

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Bsdpfsxf Up Uex Af Ajdh Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Bdedpoq Nf U Eefx Af Ajh Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Bdsdpfow D Ev Eox Af Aoh Ready to ship worldwide More pictures and videos available upon request

Condition: new, functionality: fully functional, Year of construction: 2026, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Gearbox: Heavy-duty type Walking Platforms: Available Steel Feet: Available Why Choose CONSTMACH Wobbler Feeders? CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. Bedjxpvh Tspfx Af Aedh What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 900 mm, feed rate X-axis: 40 m/min, overall weight: 900 kg, roll diameter: 35 mm, total width: 6,000 mm, total length: 2,500 mm, total height: 1,200 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, roller diameter: 140 mm, transport height: 1,200 mm, transport length: 2,500 mm, transport width: 1,250 mm, input frequency: 50 Hz, power of feed motor: 1,500 W, This video demonstrates the feeder of a four-side planer processing an oak board. Bjdpfjyftgaox Af Ajdh Technical specifications: Feeding speed: 5-60 m/min Minimum board length: 1.2 m Maximum board length: 6 m Minimum board width: 40 mm Maximum board width: 300 mm Minimum board height: 10 mm Maximum board height: 120 mm Number of feed rollers: 2 Feed drive power: 1.5 kW each Chain conveyor drive power: 1.1 kW Feeders can be equipped with chain conveyors featuring various numbers of chains, different chain spacings, and conveyor lengths to suit specific requirements. ARBOR also offers design and manufacturing services for sawmill and woodworking lines of any complexity.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Bdedpfsy Ufk Rex Af Ajh Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, Coperion ZSK 45 Mc18 Twin-screw Extruder system (2023) Drive motor Elin Bedpfsz Eh Dvsx Af Ajdh 400V IP55 122kW drive power 611 Nm 62.4Hz; 1906 1/min Gear drive Eisenbeiss Chiller 100kW cooling capacity side feeders ZS-B 58 Busch R5 RA 0025 F Vacuum pump/0.1mbar pabs/30m/h Vmax

Condition: new, Spare parts category: safety mat for CNC Allen Bradley Lignum 1600x 800 Brand: safety mat for CNC Allen Bradley Lignum 1600x 800 Model: safety mat for CNC Allen Bradley Lignum 1600x 800 Description: safety mat for CNC Allen Bradley Lignum 1600x 800 Allen Bradley Lignum CNC safety mat new, thickness: [value missing] series: 440-F, range: MatGuard, length: 1.5m, width: 1m, thickness: 16mm, Plastisol vinyl, IP67 Allen Bradley protective mat, length 1.5 m, width 1 m - 440F-M2030BYNN The Allen Bradley series MatGuard safety mat from Rockwell Automation is a safety device that detects human presence in hazardous areas. It can be connected to the control circuits of industrial machinery in hazardous environments, creating a protected area of 1.5 m (length) x 1 m (width). When the mat's detection surface senses a person, it sends a signal that shuts down the machine, preventing injury and increasing workplace safety. The durable vinyl material is resistant to bleach, acids, and other industrial chemicals, making it a suitable choice for use in demanding industrial settings. This mat is commonly used to restrict access to hazardous areas in factories. Features and advantages: • Hardened sheet steel construction increases durability. • 4-wire open and short-circuit detection system for enhanced electrical safety. • Can withstand a high static pressure of 4,500 psi (pounds per square inch) for use in heavy-duty applications. Standards and certifications: • CSA (Canadian Standards Association) • ISO13849-1 (International Organization for Standardization) • IEC/EN60204-1 (International Electrotechnical Commission) • TÜV (Technischer Überwachungsverein) Is this mat safe to use in damp or wet areas? IP67 rating CE certified TUV certified CSA certified cULus approved EN1760-1 EN954-1 ISO 13849-1 IEC/EN60204-1 ANSI RIA R15.06 ANSI/B11.19 AS4024.5 The mat is rated IP67 (ingress protection), meaning it is protected against dust and can be water-resistant for up to 30 minutes. This makes it safe for use in humid environments. Technical specifications: Attribute Parameter MatGuard Range 440-F series Protected area 1500 x 1000mm Length 1.5m Width 1m Thickness 16mm Mat material Plastisol vinyl IP rating IP67 Year: Bdodpfx Afjz Eggvo Ajh 2023

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MPC45.2, Stock No.: 2789 Bedpfx Asz A S S Sef Asdh 1 used, partially overhauled, and functionally tested compounding line Berstorff / Compex Type MPC 45, throughput up to approx. 150 kg/h, material-dependent. The system consists of: Co-rotating twin-screw extruder with barrier screw, segmented screw and cylinder Temperature control unit for cylinder / processing section (connection and water chiller on the customer side) Compex/Berstorff Type MPC 45, drive 34 kW Screws 2 x Ø 45 mm – 40 L/D with screw speed up to 450 rpm 2x Side feeder extruder ZSB 34 (twin-screw) (e.g. for glass fiber feeding - formulations) 3x Degassing zone including vacuum pump Melt filter / screen changer, hydraulic (for processing ground material) Strand granulation, complete with: strand head / nozzle Strand cooling trough and strand granulator, e.g. A-SG 60 (NEW CONDITION), IPS 60E, Alphatec, Scheer, ... Control system: Siemens HMI screen, new in 2022 OPTIONAL: Gravimetric differential dosing system with control Price on request, depending on the design and number of dosing stations. Alternatively equipped with underwater granulation, stock no. 2758 MAAG Rieter Sphero 50, with separate control Start-up / training at your plant by our technician is possible, details on request. Test run / sampling / function test with your material mix can be carried out in the short term, details and date on request. Please send us your material data sheets in advance. Further compounding extruders / lines are available for demonstration at our Wuppertal plant.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm Bdodpfxez Dvrrj Af Aoh • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages. Bjdpfxstz Dkae Af Asdh

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Bedscr Ru Dopfx Af Asdh Pick your own Cost of delivery Client cover startup type negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Bdedpfx Afob Umtko Aeh

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? Bdjdpfxjq Nw Uqj Af Ajh An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: used, functionality: fully functional, Year of construction: 2018, screw conveyor diameter: 52 mm, Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder (2018) comprising Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder with 2x 52.2 mm diameter screws 48:1 L/D ratio, co-rotating 12-barrel housing section, electrically heated and water-cooled Side feeder 1200rpm max.imum screw speed 350kW motor with Eisenbeiss ZE-042.5-16.0 gearbox Bdedpfoz Atiuex Af Aeh

Condition: used, machine/vehicle number: SN: R050A-24E0011, I-PULSE F2 Feeder F2-44mm___1 piece F2-32mm___2 pieces F2-24mm___4 pieces Bjdpfsww Etwox Af Ajdh F2-16mm___5 pieces F2-12mm___6 pieces F2-84mm___39 pieces F2-82M_mm___6 pieces Feeder Stick____1 piece

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Bdsdpjyy U Shjfx Af Ash Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), Year of construction: 2003, Feeder Caps 8006 automatic disc feeder, sorting machine Fully automated, variable dosing speed, manual height adjustment. Stainless. Bdodpfx Afeg Rkwme Aoh Year of production: 2003 Power: 0.55kW max. dosing capacity: approx. 1000 pcs / min Diameter: 1400mm Siemens control. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: new, PRICE: 5000 EUR Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Bdsdpfx Asvtz U Rjf Ash Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz Bsdpfxsvtzzkj Af Aedh

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Year of manufacture: 2018 Condition: used Operating hours: 6000 The supply includes: - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control - Electrical control panel with HMI touchscreen and existing connection cables Bsdpfjzf Adgex Af Ajdh - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) - 1 set of spare rotors with new blades installed - Other spare wear and replacement parts If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Bdedpfoz A Sz Hex Af Ajh Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Bodpfjz A Sxljx Af Ajdh Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZE60 A- Econ EUP 600, Stock- No.: 2858 1 used, partly overhauled and tested compounding-pelletizing line, consisting of: Berstorff ( Krauss Maffei ) compounding extruder Type ZE 60 A - 34 L/D twin-screw co-rotating extruder Bodpfsy At N Rox Af Aedh Extruder drive 160 kW AC Degassing with vacuum pump Laser separating head / melt filter Eprotec Melt x10 melt pump ECON EUP 600 underwater pelletizing system, complete with Start-up polymer diverter valve incl. hydraulic Water system, complete incl. pellet spin-dryer / centrifuge Control boards with Siemens Touch panel >> 12-month PLASTICO warranty OPTIONAL at extra cost: Material conveying Gravimetric loss-in-weight dosing-blending Granule classification Pellet filling station for Big Bags or Octabins Start-up in your factory by our Technicians We have more complete compounding extruders, pelletizing systems, loss-in-weight gravimetric blenders & more in Stock. Visit us in D 42329 Wuppertal or send us your inquiry, you´re welcome.