Used Silikontech Gasket, Silicone Gaskets for sale (282)

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Longitudinal seam, folding base, double edge, 4 + 6-point gluing, electronic top gluing system HHS X-tend² with 6 applicator heads, lower gluing system on the left side, mechanical overlap folding with timed/chain alignment, vibrator with compressed air at the feeder, toothed gauge at the feeder, additional center transport in the pre-breaker, pre-breakers on the right and left, kicker, counter, additional center transport in the folding section, Dünki silicone tape dispenser, pneumatic, timed press belt. Djdpfx Aeztq Ezoptocl The machine is in very good condition and can be inspected (disassembled). Max. 1100 mm, min. 126 mm.

Condition: used, Year of construction: 1993, operating hours: 9,924 h, load capacity: 2,500 kg, lifting height: 3,800 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, * STILL R 70-25 * Year of manufacture: 1993 * VW 1.6 engine * Cylinder head gasket defective Djdpezdwtysfx Aptjcl

Condition: ready for operation (used), Year of construction: 2003, functionality: limited functionality, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhein, table length: 1,600 mm, table width: 1,000 mm, controller model: Heidenhein iTNC 530, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, rotational speed (max.): 7,500 rpm, rotational speed (min.): 7,500 rpm, spindle speed (min.): 7,500 rpm, We offer this used TYC FVP 50 CNC machining center, year of construction 2003. One small need for repairment - gasket seal, otherwise completed and ready for use. Djdpoyfh Npjfx Aptscl If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Dcsdpfx Apjzi Hchstsl Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Rams: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: new, Year of construction: 2026, functionality: fully functional, MEMBRANES FOR MEMBRANE AND VACUUM PRESSES Made of silicone or natural rubber We offer high-quality silicone and natural rubber membranes for all common membrane and vacuum presses. Our membranes are available cut to your required dimensions or as roll material. SILICONE MEMBRANE MS2 Type: MS2 Material: Silicone Colour: Milky white Surface: Smooth/textured Maximum production width: 2,000 mm Shore hardness: 50 ± 3 Shore A Thickness: 3.0 mm Operating temperature: –50 °C to +200 °C SILICONE MEMBRANE MS2-50 Type: MS2-50 Material: Silicone Colour: Milky white Surface: Smooth Maximum production width: 1,800 mm Shore hardness: 50 ± 3 Shore A Thickness: 3.0 mm Operating temperature: –60 °C to +230 °C SILICONE MEMBRANE MS1 Type: MS1 Material: Silicone Colour: Milky blue Surface: Smooth Maximum production width: 1,800 mm Shore hardness: 45 ± 3 Shore A Thickness: 2.0 mm Operating temperature: –60 °C to +230 °C NATURAL RUBBER MEMBRANE MNK-R Type: MNK-R Material: Natural rubber Colour: Brown Djdpfx Aped S Efaotocl Surface: Smooth/textured Maximum production width: 2,000 mm Shore hardness: 45 ± 3 Shore A Available thicknesses: 2.5 / 3.0 / 4.0 mm Operating temperature: –20 °C to +125 °C STANDARD SILICONE SHEETING RSS Type: RSS Material: Silicone Colour: Reddish brown or transparent, other colours available on request Surface: Smooth on both sides Standard length: Cut to size or supplied as a 10 m roll, other lengths available on request Standard width: 1,200 mm, up to 1,800 mm available on request Shore hardness: 30–80 Shore A Thickness: 0.5–10 mm SILICONE ROUND CORDS RSC We also offer silicone round cords in various diameters. Type: RSC Material: Silicone Colour: Grey or transparent Standard diameters: 4–12 mm Maximum diameter: 50 mm Shore hardness: 60 ± 5 Shore A Operating temperature: –60 °C to +230 °C We will be happy to help you select the right membrane for your press and application. The stated values are guidelines and refer to normal room temperature. We reserve the right to make changes to the design and dimensions.

Year of construction: 2015, condition: excellent (used), Microglass FLY 600 Glass Lamination Furnace – a professional machine for the production of laminated glass. For sale is a professional Microglass FLY 600 lamination furnace designed for the production of laminated glass using the vacuum method. The machine is ideally suited for glassworks producing safety glass (VSG), decorative glass, glass with EVA film, and for drying coatings. The unit is equipped with a modern heating system based on infrared (IR) emitters and forced hot air circulation, which ensures uniform temperature and high lamination quality. (mitindustrial.it) Technical specifications: ● Model: FLY 600 ● Manufacturer: Microglass / MIT ● Application: glass lamination, drying of paints/coatings ● Working area: ● 1 platform 1800 × 3200 mm ● Working chamber height: 600 mm ● Number of working drawers: 1 ● External machine dimensions (closed): ● approx. 2450 × 4230 × 1350 mm ● Length with open drawers: approx. 8500 mm ● Machine weight: approx. 3100 kg ● Installed power: 45 kW ● Power supply: 400 V, 3 phases, 50 Hz ● Average energy consumption per standard cycle: approx. 27 kWh ● Lamination temperature: 130°C ● Drying temperature: 150°C ● Vacuum pump: ● two-stage ● power approx. 1.5 kW ● Control: ● touch panel ● digital vacuum gauge ● Programs: ● up to 256 programmable recipes ● possibility to set time cycles ● Heating system: ● tubular IR emitters Dcodpfxszga H Is Aptel ● hot air circulation ● Forced cooling: YES ● High-strength silicone membrane ● PTFE mesh to improve vacuum parameters ● Possibility to use an additional drawer to increase productivity (mitindustrial.it) Machine advantages: ✔ large production format ✔ high lamination quality without air bubbles ✔ economical operation for serial and single production ✔ intuitive operation via touch screen ✔ solid industrial construction ✔ ideal for VSG, decorative glass, and custom projects The machine is ready for operation. An excellent solution for professional glassworks looking for an efficient lamination furnace.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AE00003735, overall weight: 4,300 kg, input frequency: 50 Hz, input current: 126 A, input voltage: 400 V, warranty duration: 12 months, Basic information Manufacturer: SCM Group / DMC Model: DMC Eurosystem M4 1350 Year of manufacture: 2023. Condition: unused, new Operating hours: 0 h Working width: 1.350 mm Working thickness: 3-200 mm Feed speed: 2-16 m/min Power supply: 400 V, three-phase, 50 Hz Rated current: 126 A Weight: approximately 4,300 kg Serial number: AE00003735 Location: Tenja, Croatia Availability: immediately Description; For sale is an unused SCM DMC Eurosystem M4 1350 automatic wide-belt sanding and calibrating machine, manufactured in 2023. The machine has never been used in production and has 0 operating hours. It is installed at our production facility and is available for inspection by prior appointment.   Working unit configuration 1st working position - sanding roller • R 320-2620 sanding unit • Roller diameter: 320 mm • R45 rubber-coated roller, 45 Shore hardness • 15 kW motor with frequency inverter • Oscillating abrasive-belt blowing and cleaning system 2nd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 3rd working position - brush unit • BF 300 brush unit • SI 300-E helicoidal brush roller • 3 kW motor with frequency inverter • Abrasive inserts, grit 180 and 240 • Automatic electronic brush position setting • Side oscillation and reversible brush-roller rotation 4th working position - superfinishing sanding pad • S-2620 unit with superfinishing sanding pad • PE 32/L EPICS electronic sectional sanding pad • Segment pitch: 32 mm • 11 kW motor with frequency inverter • Electronic working-pressure control Dcsdpfxezyghlj Aptel • Oscillating abrasive-belt blowing and cleaning system   Outfeed finishing unit • SB/U oscillating finishing unit • SB 200 UFC Ultra Fine brush roller • Silicon-carbide fibres • Rotating blowers for final workpiece cleaning Additional equipment • Fixed working height of 900 mm • BL 32 electronic infeed panel-reading bar • EPICS electronic sectional-pad system • Vacuum conveyor system with motor up to 7.5 kW • Perforated vacuum conveyor belt • Rubber-coated conveyor belt, 50 Shore hardness • 2.2 kW conveyor-belt drive motor • Front and rear roller support tables • Eye-M industrial PC • 21.5-inch Full HD touchscreen • Maestro Pro-Sand control software • Remote service capability • Operator interface in English and Croatian • CE-compliant version Inspection and terms of sale; The machine is available immediately and can be inspected by appointment at our production facility in Antunovac, Croatia. The machine is offered ex location. Dismantling, loading, transport and installation at the buyer's site will be agreed separately. All technical information is based on the original SCM quotation and the machine identification plate. The buyer may verify the specifications and condition during inspection. Additional photographs, videos, the original technical specification and the relevant SCM documentation are available to serious prospective buyers. Price; EUR 125,000 net, plus VAT - negotiable

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake Dcjdpfxjzcmcvo Aptol ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0385, The “OSV S400G” mixing and casting machine for PUR foam gaskets. Designed for manufacturing of injection molding products from two-component polyurethane systems with their application along a given trajectory, for example electrical cabinets doors. Dcodpfoyzhbrjx Aptjl

Year of construction: 2020, operating hours: 300 h, condition: like new (used), functionality: fully functional, machine/vehicle number: T033, Suitable for all applications involving drying, heating, hot holding, sterilisation, component ageing, curing, or any other thermal testing… in laboratories and across all industrial sectors. 8 capacities ranging from 32 to 980 litres. Robust construction. External casing made of steel with white and blue epoxy coating. Internal chamber in polished stainless steel, corrosion-resistant. Ø 20 mm cable port with silicone plug. Easy cleaning thanks to rounded internal chamber corners. Excellent thermal insulation ensuring reduced energy consumption and rapid heat-up. Adjustable air renewal. Air outlet connectable to an extraction system. Precise and reliable electronic PID temperature controller. Temperature range: ambient +10°C up to 300°C. Accuracy: 0.1°C, stability 0.2°C. Djdpfx Aeywcaheptecl

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Dcsdpsu E U Hbofx Aptol Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Condition: used, Year of construction: 2010, Brooks Automation Wafer Front-End Module, 300mm, ASYST Spartan EFEM, Sorter Dcedsx I Ax Sspfx Aptsl Model: ASYST Spartan EFEM Type: Sorter Condition: Used Technical Data: 100-240V AC 50/60Hz 10A General: 300-mm EFEM with 3 load ports, cleanroom mini-environment, and integrated wafer transfer robot This unit is an Equipment Front End Module (EFEM) from the ASYST Spartan series, designed for fully automated handling of 300 mm silicon wafers in semiconductor manufacturing. It features three load ports, a mini-environment with ULPA air filters, internal lighting, comprehensive safety controls, and all necessary interfaces for seamless integration into production lines. In addition, it comes with a fully integrated wafer transfer robot that extracts wafers from FOUP/carrier load ports, separates them, and precisely delivers them to downstream process modules. Year of manufacture: 27.12.2010 Including CD with operating, service, and installation manuals (9701-3060-01 Rev G)

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm Dcodpsy Hmhhsfx Aptol - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2015, through-put width 580 mm working heigth 580 mm air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Description - Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges Dsdpfxew Rrcwo Aptecl - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with pressure gauge

Condition: excellent (used), functionality: fully functional, mileage: 12,00,000 km, fuel type: diesel, fuel: diesel, Year of construction: 2013, DAF XF 460 Road Tractor Year: 09/2013 Diesel Euro 6 Automatic transmission 340 kW (460 hp) Retarder Air conditioning Webasto heater Spoiler Sun visor Dcedezyl Hyepfx Aptel Electric mirrors and windows Tire size: 315/80 R 22.5 Mileage: 1,200,000 km TRUCK WITH HEAD GASKET PROBLEMS! Price: €6,900 (NEGOTIABLE) DESCRIPTION: DAF XF 460 Road Tractor Unit Year: 09/2013 Diesel Euro 6 Automatic transmission 340 kW (460 hp) Retarder Air conditioning Webasto heater Spoiler Sun visor Electric mirrors and windows Tire size: 315/80 R 22.5 Mileage: 1,200,000 km TRUCK WITH HEAD GASKET ISSUES! Price: €6,900 !!!

Year of construction: 2025, operating hours: 15 h, condition: like new (used), functionality: fully functional, input current: 230 A, machine/vehicle number: 202505, Absolutely like new! Demo unit (price incl. 19% VAT) - Speed oven with non-stick cooking chamber - Suitable for cooking and heating food - TRIAC circuit for precise power control Dcodeyxy R Tspfx Aptsl - Integrated exhaust air management from the cooking chamber Scope of delivery - Starter accessory set consisting of: - 1 × rectangular pan, smooth, 260 × 260 mm - 1 × round snack pan, Ø 190 mm - 1 × round snack pan, Ø 250 mm - 1 × tong for 50 bowls - 1 × turner, 360 mm - 1 × silicone tong, 260 mm - Power cable Housing & design - Color: Red / Stainless steel Technical data - Dimensions (H × W × D): 420 × 540 × 500 mm - Power: 3,000 W - Weight: 29.5 kg - Connection: 230 V / 50 Hz / 16 A The speed oven is a compact high-performance unit for professional use in the catering industry. It is suitable for rapid cooking, baking, and heating of various dishes, designed for efficient workflows with high output. The speed oven features a non-stick coated cooking chamber and integrated exhaust air management. Thanks to TRIAC circuitry, the device allows for precise operation and consistent power regulation. Low odor, enables roasting characteristics without fat or oils ... Functionality - Speed oven with non-stick cooking chamber - Suitable for cooking and heating food - TRIAC circuit for precise power control - Integrated exhaust air management from the cooking chamber Extensive accessories available, such as steak contact plates... (Source: Website Reamotion Delmenhorst)

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. Dcedpjzxt Snjfx Aptsl The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: used, functionality: fully functional, machine/vehicle number: H2X386D04603, Year of construction: 2013, operating hours: 16,350 h, load capacity: 2,000 kg, lifting height: 4,625 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork length: 1,200 mm, empty load weight: 3,579 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X386D04603 Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: As new Technical condition: Very good Front tyre type: Non-marking Front tyre condition: 80 - 100% Rear tyre type: Non-marking Rear tyre condition: 80 - 100% Battery voltage: 48V Battery capacity: 690Ah Battery type: PzS Battery year: 2016 Battery condition: 60 - 80% Description: Workshop-inspected with UVV safety approval and refurbished: hydraulics checked and gasket sets replaced; various hydraulic hoses replaced; seat and backrest upholstery new; steering wheel and various attachment and cover parts replaced Sideshift, fork positioner, Dcedjxy Ttbjpfx Aptol 3rd valve, 4th valve, rear working light, front working light, full free lift, CE certificate, Blue Spot safety light rear

Condition: excellent (used), Year of construction: 2015, working width: 3,000 mm, total height: 1,000 mm, cutting height (max.): 10 mm, The ATOM FlashCut EASY 888 L30 plotter is an advanced digital knife cutting machine designed for precise and rapid cutting of a wide range of materials, including leather, textiles, foams, and plastics. It is especially valued in the footwear, leather goods, and technical gasket/component manufacturing industries. ⸻ 📐 Technical Specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Key Features • Versatility: The plotter enables cutting of various materials, from soft leathers to rigid plastics. • Ergonomics: Its compact and ergonomic design ensures ease of operation and space savings in the production facility. • Vacuum system: The dual-zone vacuum system ensures stable material hold during the cutting process. • Cutting head: Supports various tools, including oscillating knives and crease tools, enhancing production flexibility. ⸻ 🏭 Industrial Applications The ATOM FlashCut EASY 888 L30 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising materials production Dedpfsy D Sa Dsx Aptscl ⸻ 🛠️ Additional Information The L30 model is particularly recommended for companies seeking a solution that combines high cutting precision with production efficiency. With the ability to process large material formats and support multiple cutting tools, this plotter is suitable for both serial manufacturing and individual project tasks.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: E0062793, Design Dedpfszhmkpjx Aptecl Semi-automatic self-cleaning permanent magnet Pneumatic cleaning Stainless steel design CE compliant For continuous industrial applications Performance data Maximum flow rate: 65 m³/h Minimum separable iron particle size: 30 µm Maximum particle size: 10 mm Maximum operating pressure: 2 bar Maximum product temperature: 60 °C Ambient temperature: -10 to +60 °C Materials Product-contact parts made of stainless steel AISI304 / AISI316L Housing made of stainless steel AISI316L Food-grade silicone seals (FDA / EC1935/2004) Connection Flange size: 300 × 300 mm Installation length: 145 mm

Condition: used, Year of construction: 2009, The *Alfa Laval M10-MBASE* is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. *Technical Specifications* *Type:* M10-MBASE *Heat transfer area:* 2.6 m² *Plate material:* Stainless steel Alloy 316, thickness 0.50 mm *Gasket material:* NBRFF Clip-On (Nitrile rubber) *Plate pack thickness:* 63 mm *Total weight:* 232 kg Dcedpfxjzx A Avj Aptol *Total volume:* 13 liters *Dimensions:* Height 672 mm, width 618 mm, depth 530 mm *Connection standard:* DIN NW100 *Bolts:* M20 *Expandable:* up to 17 additional plates *Operating Data* *Design pressure:* 10 bar *Test pressure:* 14.3 bar *Design temperature:* up to 120 °C *Minimum temperature:* 0 °C *Typical flow examples (according to datasheet):* Wine: 2,000 L/h (heating 12 → 17 °C, Δp = 47 kPa) Hot water: 2,000 L/h (cooling 30 → 24 °C, Δp = 22 kPa) Fruit juice: 240 L/h (heating 21 → 75 °C with 90 °C hot water, Δp ≈ 40–50 kPa) *Design Features* *Plates with parallel flow channels* ensure high efficiency and low pressure drop. *Clip-on gaskets* for easy maintenance and cleaning. *Robust frame and pressure plate construction* with M20 tightening bolts (length 360 mm). *Flexible capacity expansion*, up to 17 additional plates can be installed. *User-friendly assembly* with clear A/B plate markings. *Typical Applications* Beverage pasteurization (e.g., wine, juice, beer) Hot water and cooling water circuits CIP cleaning systems General process heat transfer in industrial applications

Year of construction: 2007, condition: used, functionality: fully functional, Hello, we are selling our epoxi mixer and applicator Wagner colora. The machine is in working condition but it needs some cleaning and small repairs. We use it for the mixing of the A component Tenax RESINA 5030 and B component Indurente BB30H and use it for the stone slabs reinforcement. The machine is mounted on the mobile steel plate with wheels. For the working it needs 2x 240V power supply for the heating belt for both components and compressed air for working. In the offer is also a lot of spare parts like an extra application gun, a lot of mixers for the resin, one way valves, set of gaskets for the both dosing cylinder. I can send an video of working. Best regards, Dcedpfx Aeym Uubjptel

Condition: used, mileage: 8,28,776 km, power: 324 kW (440.52 HP), first registration: 03/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2027, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGX 18.440 4x2 BLS-EL | XLX | Retarder | Auxiliary Air Conditioning VIN: 705265 MAN invoice dated 04/2026 for €6,300 net is available. The following were renewed, among other things: main bearings/connecting rod bearing shells of the crankshaft, all connecting rod bearings, intercooler, cylinder head cover gasket, engine oil filter, oil pan gasket, and various seals/O-rings. In addition, the engine oil was changed, valve clearance adjusted, engine diagnostics and functional testing were performed. CHASSIS / COMPONENTS * 4x2 * Leaf/air suspension * Wheelbase: 3,600 mm * ABS * 2-line air connection * ABS connection * 15-pin electrical connection * Aluminum rims * Full spoiler ENGINE / TRANSMISSION * 324 kW (440 hp) * 12,419 cm³ displacement * Euro VI A * Automatic transmission * Retarder * Differential lock CAB / DRIVER'S CAB * XLX cab * Automatic climate control * Auxiliary heater * Auxiliary air conditioning * Navigation * CD radio * Hands-free system * CB radio * Distance cruise control * Lane departure warning system * Collision warning / Emergency braking assistant * Refrigerator * 2 bunks TIRES * Axle 1: 315/70 R22.5, remaining tread approximately 30% / 30% * Axle 2: 315/70 R22.5, remaining tread approximately 70% / 70% WEIGHTS * Permissible total weight: 18,000 kg * Technically permissible total weight: 20,500 kg * Unladen weight: 7,550 kg * Payload: 10,450 kg OTHER * German vehicle * MOT (TÜV): 06/2027 * Inspection (AU): 12/2026 New MOT/inspection and weight adjustments are possible upon request. We will also not leave you alone after the purchase: we will help you obtain export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to assist you! We speak German, English and Russian. All information is subject to change without notice. Errors, omissions, printing and spelling errors and prior sale are reserved. About us Leible Nutzfahrzeuge is a family-run company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of purposes. We don't just focus on the vehicle, but also on the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! Our services for you Dsdpfx Aozirpasptocl Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in the organization of special transports. Export and short-term license plates We will help you obtain export or short-term license plates. Customs formalities We will also assist you with customs matters. Vehicle transport On request, we will arrange for the transport of your vehicle within Germany.

Condition: used, Year of construction: 2014, functionality: fully functional, Processing material: 1K silicone – Single-component silicone for sealing glass. Silicone application: Sealing the glass. Application along the glass/profile contour. Dcedpfx Apoznbv Totel Processing position: Vertical workpiece guidance and processing.

Condition: excellent (used), Year of construction: 2008, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine designed for precise and fast cutting of a wide range of materials, such as leather, textiles, foams, and plastics. It is particularly valued in the footwear, leather goods, and gasket/component manufacturing industries. ⸻ 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Main features • Versatility: The plotter enables cutting of various materials, from soft leathers to hard plastics. • Ergonomics: Compact and ergonomic design ensures easy operation and space-saving installation in production facilities. • Vacuum system: Dual-zone vacuum system ensures stable material hold-down during cutting. • Cutting head: Supports multiple tools, including oscillating knives and creasing tools, providing greater production flexibility. ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used for: Dodpfx Ajy D E R Njptjcl • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising material production ⸻ 🛠️ Additional information The 3010 model is especially recommended for companies seeking a solution that combines high cutting precision with production efficiency. Thanks to its ability to process large-format materials and support for various cutting tools, this plotter is suitable for both serial production and custom projects.