Used Spohn Burkhardt Load Resistance for sale (31,149)

Year of construction: 1994, operating hours: 5,742 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 17-109-94, For sale: PROMECO GT15 turbine shot blasting machine with a rotary table. The machine is fully functional and ready for operation, and can be inspected while running. The machine has been well-maintained and upgraded over time with numerous overhauls and repairs. Sale is due solely to an upgrade to a larger machine. TECHNICAL SPECIFICATIONS: - Brand: PROMECO - Model: GT15 - Year: 1994 - Configuration: rotary table - Turbine: 1 x 7.5 kW - Power supply: 220/380 V - Total operating hours: 5742 h - Includes 325 kg of new, professional-grade abrasive media MAINTENANCE PERFORMED: - Turbine motor replacement - Fan replacement - Rotary table bearing replacement Iodpfszcwpmjx Ahnoig - Complete replacement of internal wear-resistant linings - Control panel and switchboard upgrade - Overhaul and upgrade of the pneumatic system Machine in excellent operating condition. Interior completely restored with new wear-resistant linings. Includes: - Technical documentation - Certification - Original identification plates Available: - Detailed photos - Operating video upon request - Additional technical information upon request Opportunity to inspect the machine while running. Assistance with loading and transport is available. PRICE: €18,500.00 (excluding VAT), negotiable.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) Iiedszhub Aopfx Ahnjg - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B Plananlage 125 spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min max. torque on the spindle 1410/2000 (100/40 % ED) Nm total power requirement 100 kVA Iiodpfx Ahszvm Hyonsg dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: used, Year of construction: 2010, x-travel 1.100 mm y-travel 900 mm z-travel 1.250 mm control SIN 840 D spindle turning speed - gearbox stage 1 20 - 1.333 1/min. spindle turning speed - gearbox stage 2 1.333 - 8.000 1/min. power capacity at 60% / 100 % load 50 / 37 KW tool taper SK50 B - axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 500 U/min feed X/Y/Z/-axis 1 - 60.000 mm/min rapid traverse 60 m/min feed capacity X/Y/Z 17 kN numbers of pallets 2 pallet size 800 x 800 mm table load 1,50 t tool magacine with 120 Plätzen tool length - max. 600 mm Iedpfx Asymfzrjhneig tool diameter 135 mm wotkpiece diameter with 2 vacant positions 350 mm weight of tools max. 60 kg total power requirement 150,00 kW weight of the machine ca. 35,00 t dimensions of the machine ca. 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation; Pallett-changer with 2 palletts and hydr. chuck Forkardt 3KS1000, Coolant unit KNOLL; Coolant through spindle (30 l/min 50bar);

Year of construction: 2023, condition: new, Manufacturer: TMC Transformers S.p.A. Year of manufacture: 2023 Serial number: 0059578921 Type: dry-type transformer Iiedpfx Aez Atdxehnsg Rated power: 2000 kVA Number of phases: 3 Frequency: 50 Hz Primary voltage: 20,000 V Primary side tap range: 19,000–21,000 V Primary side current: 57.74 A Secondary voltage: 400 V Secondary side current: 2886.75 A Short-circuit impedance Uk: 6.28% Connection group: Dyn5 Cooling: AN Thermal class: F/F Temperature rise: 100/100 K No-load losses P0: 2340 W Load losses Pk: 16,000 W Weight IP00: 5700 kg Weight IP34: 6350 kg Fire resistance class: F1 Climate class: C3 Environmental class: E4 Standards: IEC 60076-11:2018, EN 50588-1:2015

Year of construction: 2014, condition: used, The burner was in operation in a steam boiler from 2014 to 2023. In 2023, the burner was replaced with a dual-fuel burner. The unit was operated under load five days a week, and at base load on Saturdays and Sundays. Since its removal, it has been stored in its packaging in a dry, temperature-controlled hall. Manufacturer / Type: Garioni Naval NG 2000 Boiler medium: Steam Boiler output: 736.0 kW Burner output: 800.0 kW Firebox resistance (mbar): 8.0 mbar Firebox diameter (mm): 734 mm Firebox length (mm): 3,400 mm Type of gas: Natural gas N Heating value Hi: 10.35 kWh/m3 Relative density d (air = 1): 0.600 Gas flow rate: 77.3 m3/h Flow pressure at shut-off valve (mbar): 40 mbar Iedpfxjzwfyhe Ahnjig Installation height above sea level (m): max. 450 m

Condition: good (used), functionality: fully functional, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, overall weight: 3,300 kg, Monforts KNC5-1500 Lathe in good condition for sale. The machine operates perfectly. Included accessories comprise all documentation, a quick-change toolholder, and a chip conveyor as shown in the photos. Inspection under power is gladly possible. Loading can be arranged by forklift or crane. Working area: Distance between centers: 1,580 mm Swing over bed: 500 mm Swing over cross slide: 290 mm Cross slide travel: 265 mm Top slide travel: 140 mm Bed width: 360 mm Cross slide width: 220 mm Bed slide guide length: 615 mm Turning tool shank size: 32x25 mm Spindle diameter at front bearing: 100 mm Spindle nose as per DIN 55027, Size 8 Bar capacity: 70 mm Spindle taper (metric): 80 Main drive: steplessly variable, three-phase AC motor Drive power (50/100% duty cycle): 15/11 kW Total speed range: 2-2,800 rpm Gear stage I: 2-280 rpm Gear stage II: 7-1,120 rpm Gear stage III: 28-2,800 rpm Three-phase servo drive with mechanical safety clutch Rapid traverse speed longitudinal/cross: 10/5 m/min Thread cutting range: longitudinal and taper threads, pitch 0.001-500 mm Tailstock: quill diameter 80 mm Quill stroke 160 mm Internal taper MK5 Tool system: Multifix quick-change toolholder, size C Coolant system: pressure/delivery rate 0.4 bar / 10 l/min Machine dimensions (LxWxH): 3,330 x 1,550 x 1,790 mm Weight (transport unit): approx. 3,300 kg Bed: – Torsion-resistant bed, guideways hardened and ground Gearbox: 3-stage with limit switch monitoring Spindle: – Front spindle bearing: double-row cylindrical roller bearing with tapered bore combined with double-row angular contact bearing – Electric holding brake in main drive motor – Full-length cross slide with adjustable gib Longitudinal and cross feed driven by variable-speed three-phase AC motor via precision ball screw Feed and rapid traverse operated via cross selector lever Longitudinal and cross movements via electronic handwheels Increment selector switch in combination with electronic handwheel Additional contour handwheel Automatic central lubrication for guideways and ball screws Clampable top slide – Quick-change toolholder – Bedway clamping by excenter lever – Additional clamping via tension bolts for heavy workpieces – Quill adjustment by handwheel Iijdjypbcdopfx Ahnsg – Quill tip holder MK5 Connection voltage: 3 x 400 Volt +/-10%, 50 Hz for TN-S or TN-C networks without RCD Total connected load: 16 kVA Transistor-controlled three-phase main drive with speed monitoring If you have any questions, please feel free to contact us at any time.

Condition: used, functionality: fully functional, machine/vehicle number: T.D.B (Serial No. F9902638), For sale: High-capacity industrial load resistors manufactured by Delta Résistances S.A. Technical specifications per unit: - Power rating: 250 kW at 400 V Iiodpfx Aszl Elaohnjg - Current: 360 A - Resistance: 0.64 Ohms Ideally suited for heavy-duty applications, including generator load testing (load banks), motor braking cycles, and electrical discharge systems. Units are CE certified. Logistics: Both units are securely packed and stored together on a single pallet for easy transport. Dimensions per unit are 240 cm (width) x 35 cm (depth) x 110 cm (height). Worldwide shipping can be arranged upon request. Inspection is available by appointment.

Condition: excellent (used), functionality: fully functional, NIMO KG SK800MK | Two-column lifting platform with tilting mechanism for pallet boxes and containers Manufacturer: Nimo-KG Model / Type: SK800MK (SK 800 MK) Serial number: 7936 Iodpfx Ahszzfaiensig Power supply: 380 V / 50 Hz, 3.5 A Motor power: 1.5 kW Maximum lifting capacity: 800 kg Discharge / tilting height: 3000 mm Overall dimensions: 1400 x 2000 x 4200 mm This professional, two-column lifting platform with a controlled tilting mechanism, manufactured by the renowned Swedish company Nimo-KG (model SK800MK), is an industrial device designed for the automated lifting and emptying of heavy pallet boxes, EURO containers, and bins. The equipment is designed for continuous operation in meat processing, fruit and vegetable processing, bakery, and chemical and pharmaceutical plants, where reliability and a high level of hygiene are required. The lifting platform features a stable, two-column construction made entirely of the highest quality, acid-resistant stainless steel. The device allows for efficient and safe lifting of loads up to 800 kg to a tilting height of 3000 mm. This makes the machine ideal for directly loading raw materials into tall hoppers, mixers, blending tanks, cooking vessels, or packaging lines.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Integrated Dryer Isdpfxoxx Snbe Ahnoig Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Complete meat grinding set The set on offer is a complete meat grinding station built around the NOMA NOWICKI W-130 AL angle grinder, manufactured in 2025. Besides the grinder itself, the set includes a W-130 column bin lift that makes it easy to load raw material directly from bins into the machine’s throat, W-130 tool trolleys, a complete set of sieves/plates, and spare parts, making the offer a ready-to-use, self-contained production station. How does the NOMA NOWICKI W-130 AL grinder with bin lift work? Meat raw material is placed in a tool trolley, which is then raised by the column bin lift and tipped directly into the grinder’s feed hopper, eliminating manual carrying and lifting of heavy raw material. Inside the machine, raw material is moved by a feed screw to the cutting assembly, where knives and sieves/plates (selected according to the desired grind size) reduce it to a uniform structure ready for further processing — meat batters, stuffings, sausages, or burgers. The angle design of the W-130 AL grinder allows for a compact station layout and ergonomic operation, while its solid stainless and acid-resistant steel construction makes it easier to maintain a high hygiene standard. Key advantages of the NOMA NOWICKI W-130 AL set Iedpezxf Afefx Ahnjig The column bin lift significantly streamlines raw material logistics at the station, reducing operator physical strain and shortening the time needed to load successive batches of meat. The addition of W-130 tool trolleys allows smooth movement of raw material between production stages, and the included set of sieves/plates enables quick changes to the grind size of the processed product without needing to purchase additional tooling. Manufactured in 2025, the set on offer is virtually new, and the included spare parts provide extra assurance of continuous station operation from the very first days of use. Technical specifications of the NOMA NOWICKI W-130 AL set NOMA NOWICKI W-130 AL grinder Manufacturer: NOMA Nowicki Machinery Model: W-130 AL Serial number: 08025235 Year of manufacture: 2025 Powe: 13 kW in 1st gear, 20 kW in 2nd gear Power supply: 3 x 400 V / 50 Hz Grinder dimensions (L x W x H): 1650 x 1550 x 1670 mm Construction material: stainless and acid-resistant steel Compliance: CE, Made in EU Set components W-130 column bin lift – dimensions: 1150 x 1200 x 2850 mm W-130 tool trolleys Complete set of sieves/plates Spare parts Overall set dimensions (L x W x H): 2350 x 1750 x 2850 mm Application of the NOMA NOWICKI W-130 AL set The set is used in meat processing plants, butcheries, slaughterhouses, and facilities producing stuffings, sausages, burgers, and pâtés — wherever, in addition to the grinding itself, efficient logistics of feeding raw material into the machine matter. The column bin lift makes the station well suited to working with large batches of raw material delivered in transport containers.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516327000881, Year of construction: 2007, operating hours: 15,936 h, load capacity: 4,000 kg, lifting height: 4,910 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, TECHNICAL DETAILS Lifting capacity: 4,000 kg Lifting height: 4,910 mm Free lift: 0 mm Fork length: 1,200 mm Minimum fork width: 440 mm Maximum fork width: 1,150 mm Number of wheels: 4 MACHINE DETAILS Mast type: Duplex Operating hours: 15,936 h Drive: Electric Iiedezza Stepfx Ahnsg Battery voltage: 80 V Battery capacity: 930 Ah Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,250 x 3,180 mm Shipping weight: 6,777 kg EQUIPMENT Fork adjustment Side shift Full cabin Radio Joystick Heater Work lights Documentation CE marking

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Operating voltage: 400 V Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h Iodezwmx Sjpfx Ahnjig EQUIPMENT Tool holders SK 40 Documentation Heidenhain programming manual Machine vise Clamping jaws

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, table load: 20,000 kg, spindle speed (max.): 3,500 rpm, number of axes: 3, This 4-axis Burkhardt-Weber MC100 was manufactured in 1998. It features a working range with an X-axis travel of 3,000 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 1,500 mm. The machine has a maximum table load capacity of 20,000 kg and a spindle speed of 3,500 RPM. If you are looking to get high-quality milling capabilities, consider the Burkhardt-Weber MC100 horizontal machining centre we have for sale. Contact us for further details. • B-axis (NC rotary table): 360° continuous • Tooling standard: High-torque configuration for large-scale milling • Additional notes: • Retrofitted in 2008 Technical Specification Taper Size BT 50 Iodpfx Ahjzg Il Eonjig

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Model: VR-5200 Type: Measuring Head Light Sources Observation light source: LED ring light (red, blue, green) Measurement light source: White LED Control Unit: VR-5000 Observation and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Iiodpeyc Nmwefx Ahnjg Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38×: Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50×: Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40×: Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80×: Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120×: Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160×: Horizontal 1.9 mm Vertical 1.4 mm Zoom: 1× to 4× Height Measurement Measurement resolution: 0.1 µm Height Measurement Range Without Z image composition Macro mode: 10 mm Micro mode: 1 mm With Z image composition Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without Z image composition: 0.4 µm With Z image composition: 1.0 µm Measurement Accuracy Without Z image composition: ±2.5 µm With Z image composition: ±4.0 µm Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement Accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Composition Fully automatic measurement (automatic XY control + automatic Z focus), automatic assignment, automatic area setup Measurable XY range: 206 × 104 mm Object Table XY travel: 184 × 88 mm (motorized) Z travel: 73 mm (motorized) Load capacity: 4.5 kg Working distance: 75 mm Image Sensor 4-megapixel CMOS, B/W Transmitter Lens Dual telecentric lens ×2 Receiver Lens Dual telecentric lens Data Processing Dedicated PC as per KEYENCE specifications (Operating system: Windows 11 Pro) Power Supply Voltage: 100 to 240 V AC, 50/60 Hz Power consumption: Max. 200 VA Environmental Resistance Operating temperature: 15 to 30°C Relative humidity: 20 to 80% RH (no condensation) Weight: Approx. 28 kg (net measuring unit weight approx. 11 kg)

Condition: used, Year of construction: 2023, Integrated CompAir L45RS Workstation Manufacturer Gardner Denver Deutschland GmbH (Main Compressor Package), with integrated components from Parker Hannifin Manufacturing S.r.l. (Refrigeration Dryer) and Cordivari S.r.l. (Galvanized Pressure Vessel). Type Variable-speed rotary screw air compressor workstation driven by an integrated frequency inverter system, fully integrated with a downstream refrigeration dryer and a vertical galvanized air receiver tank. Industrial Applications Engineered for continuous, energy-efficient plant compressed air generation in manufacturing, industrial engineering workshops, packaging facilities, and automotive assembly plants. This system relies on variable-speed control to match precise downstream air demands, significantly reducing energy overheads under fluctuating load profiles. Key Technical Specifications * Core Compressor Unit: CompAir L45RS-13A (Version V2) - Technology: Oil-injected rotary screw with frequency inverter (Regulated Speed) - Installed Motor Power: $45 \text{ kW}$ (Max speed: 4,250 R.P.M.) - Volume Flow Rate (Capacity): Up to $8.02 \text{ m}^3\text{/min}$ max - Operating Pressure: $13 \text{ bar g}$ maximum stage pressure - Electrical Supply: $400 \text{ V}$ | 3-Phase | $50 \text{ Hz}$ | Full load current: $97 \text{ A}$ - Control Unit: DELCOS XL touchscreen graphic controller showing 55,404 total running hours and 55,366 hours loaded - Refrigeration Air Dryer: CompAir F95HS (Parker Hannifin), using eco-friendly R407C gas, max pressure $14 \text{ bar}$ - Air Receiver Tank: Cordivari $986 \text{-Liter}$ vertical vessel, maximum allowable pressure $10.67 \text{ bar}$, hot-dip galvanized finish for long-term corrosion resistance Machine Utilization The main CompAir L45RS rotary screw compressor serves as the mechanical core of this processing package, drawing raw air and compressing it via its high-efficiency $45 \text{ kW}$ screw element. The integrated inverter matches motor speeds directly to factory demand to avoid wasteful start-stop cycles. During continuous operations, the CompAir F95HS refrigeration dryer strips moisture out of the compressed air stream to safeguard downstream pneumatic components and tools from rust and water carryover. Finally, the standalone $986\text{-Liter}$ galvanized storage tank acts as an expansion buffer volume to smooth out pressure spikes and handle natural consumption peaks without stressing the main drive. System Highlights * Compressor-Centric Production Station: A complete utility layout engineered to maximize the operational lifespan and performance of the core $45 \text{ kW}$ screw compressor. Iiedpfszcatbex Ahnjg - Smart Variable Demand Matching: The inverter regulation ensures optimal energy savings, matching actual air consumption rather than running a constant fixed-speed overhead drain. - Robust Diagnostic Integrity: The premium DELCOS XL interface monitors air station diagnostics, recording exact usage metrics, load profiles, and service intervals directly from one integrated control panel.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,044 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, laser power: 6,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details. • Working format/area: 3,000 x 1,500 mm; X 0–3,000 mm / Y 0–1,500 mm / Z 0–115 mm • Machine design: Closed machine frame; gantry drive with direct linear drives; automatic longitudinal pallet changer; integrated control cabinets and storage cabinet; working-area lighting; machine status light; water/air machine and laser chiller; CE compliant; ambient temp 5–35 °C • Dynamics/accuracy: Max simultaneous axis speed 280 m/min; Ps 0.03 mm; Pa 0.05 mm; min programmable increment 0.001 mm • CNC control: Siemens SINUMERIK 840D sl with 21.5" color MultiTouch; MultiTouch HMI; USB and RJ45; integrated technology data; programmable cutting gas/pressure; production planning; multi-sheet processing; automatic shutdown; Remote Support interface; Condition Guide; Cutting Guide; Central Link; Online Update Manager • Laser source: TRUMPF TruDisk 6001 (6 kW) solid-state disk laser; fiber-optic beam delivery; one LLK output; closed beam guidance; high back-reflection resistance; stable output over service life • Cutting head: Universal cutting unit; single cutting-head strategy; adaptive lens system; protective glass with online condition monitoring; auto nozzle centering; collision protection; capacitive height control; automatic focal position; pilot laser • Standard cutting functions: AdjustLine; BrightLine fiber; ControlLine; FastLine; FlyLine; FocusLine; NitroLine; PierceLine; Performance package; Highspeed cutting package; Copper and Brass cutting packages; Micro-weld • Additional cutting package: Highspeed Eco (fusion cutting, medium-thickness stainless steel) with up to 70% cutting-gas reduction and up to 100% sheet throughput increase • Automatic nozzle changer: 21 positions; automatic change/cleaning/re-setting tied to material/process; reduces setup/handling Iijdpozuzwdofx Ahneg • Drop&Cut: Integrated camera; assigns live image of residual sheet to part geometry; live cutting preview; no separate programming needed for basic use • Process monitoring camera: Front-area monitoring (~2.5 m); remote observation; preliminary result assessment; video stream output to external monitor • Pallet/material handling (machine-integrated): Automatic longitudinal pallet changer; loading/unloading parallel to machining; pallet access from three sides • 1 x license TruTops Boost Additional equipment • LiftMaster Compact 1530 (AL34) automatic loading/unloading system • Type 1530; max sheet 3,000 x 1,500 mm; min sheet 1,000 x 1,000 mm • Max sheet thickness 25 mm; max sheet weight 900 kg; max unloading weight 900 kg • With rake lifter: max thickness 25 mm; with rake lifter + belt system: max thickness 15 mm • Minimum part size with rake lifter: 150 x 150 mm • LiftMaster equipment/options • Storage connection; extended pallet travel out of machine • Sheet separation device; double-sheet detection; synchronous loading • Thin-sheet separation (0.8–2.0 mm); loading station for 90 mm stack height • Structural-steel loading grippers, 67 mm pitch, replaceable tines

Condition: used, functionality: fully functional, machine/vehicle number: 651 (4531040), Year of construction: 2008, For sale is a Palfinger work platform made of GRP (manufacturer: GFK‑Technik, M. Langer), ideal for maintenance, assembly, and service work, especially in electrical environments. The platform offers insulation protection up to 1,000 V and is therefore suitable for work near electrical installations. Note: The Z 147 platform exchange system is required for use. Only for vehicles > 7.5 tons. Features & Advantages Material: GRP (glass fiber reinforced plastic) – corrosion-resistant, lightweight, durable Access: Folding ladder with safety handrail for safe entry Iodpfx Aozhkwgjhneig Optional equipment: Aluminum tool tray (700 x 100 x 90 mm) Technical Data Manufacturer: GFK‑Technik, M. Langer (Palfinger) Manufacturer's part number: 651 (4531040) Year of manufacture: 2008 Dimensions (L x W x H): approx. 1,630 x 900 x 1,100 mm Load capacity: 300 kg Insulation protection: up to 1,000 V Required system: Platform exchange system Z 147 Access: Folding ladder with safety handrail Condition Used, well-maintained, functional. Inspection possible by arrangement.

Condition: new, Year of construction: 2026, 60 Ton Transport Roller Set – Heavy-Duty Industrial Solution for Moving Massive Loads The 60-ton transport roller set is an industrial-grade tool designed for efficient and safe movement of massive objects such as production machinery, structural components, and industrial equipment. The set consists of transport platforms and steering bars, creating a system that enables precise maneuvering even under demanding operating conditions. Its construction meets the highest standards of strength and stability, making it an essential solution for industrial, logistics, and construction applications. Main advantages of the 60-ton transport set Working load capacity up to 60,000 kg – enables safe and controlled movement of extremely heavy equipment. Heavy-duty steel construction – provides resistance to high loads, impacts, and intensive industrial operation. 30×65 mm transport rollers – made of wear-resistant material, leaving no marks on the surface and operating in a tracked roller system. Anti-slip pads – increase friction between the load and the platform, preventing unwanted movement during transport. Compact dimensions and low loading height (140 mm) – allow easy maneuvering in confined spaces and technical corridors. Steering bar with ±90° turning angle – ensures precise guidance of the set even in areas with limited maneuvering space. Construction and technology – optimized for extreme loads The set has been designed with durability, safety, and ease of operation in mind. The main components are manufactured from thick steel profiles, providing long service life and resistance to bending and twisting under heavy loads. The transport rollers ensure low rolling resistance, while their precise mounting in the support system minimizes vibrations and guarantees smooth movement of the load. Key components: Transport platform – equipped with a Ø150 mm load-bearing surface and 30×65 mm rollers, ensuring optimal load distribution. Steering bar (880 mm) – enables directional control and precise maneuvering of the load even in areas with limited operating space. Connecting bar – 1000 mm long, allowing adjustment of the trolley spacing to match the width of the transported load. Precise maneuvering and maximum transport safety Thanks to precise manufacturing, the 60-ton transport set enables stable, smooth, and safe movement of even the most demanding loads. The anti-slip surface reduces the risk of load shifting, while the compact geometry of the set makes operation easier in confined spaces. The integrated steering system provides the operator with full control over every movement, even in conditions with limited visibility or difficult surfaces. Ijdpfozh E D Ujx Ahnsig Standard equipment 2 × transport platforms with 16 rollers (30×65 mm) 2 × steering bars, length 880 mm 2 × connecting bars, length 1000 mm Technical specifications – 60 Ton Transport Set Parameter Value Roller size 30×65 mm Load capacity 60,000 kg Loading height 140 mm Load-bearing surface per element Ø150 mm Support points 1 Steering bar length 880 mm Steering angle ±90° Dimensions (L × W) 320×155 mm Platform dimensions (L × W) 130×130 mm Connecting bar length 1000 mm Trolley spacing width 120–665 mm

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm Iijdpfx Ahjv Iflpjneg • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,395 h, travel distance X-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis POSmill H 500 U was manufactured in 2020. It features a Heidenhain TNC 640 control system and includes additional equipment such as a chip conveyor and an external cooling unit. With a nominal power of 60 kVA and extensive operational hours, this machine is well-equipped for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the POSmill H 500 U vertical machining centre we have for sale. Contact us for further details. Iedpfxez Ayklj Ahneig - Control Type: Heidenhain TNC 640 (NC Software: 340590 09 SP2)- Nominal Power: 60 kVA- Full Load Current: 80 A- Max. Load Current: 115 A- Short Circuit Resistance: 25 kA- Voltage: 400 V, 50 Hz (3-Phase)- Control On Hours: 24,470:15:33- Machine On Hours: 22,600:24:22- Program Run Hours: 14,169:52:59- Hydraulic Hours: 22,633:39:41- Axis Hours: 11,234:28:24- Spindle S1 Hours: 11,395:56:49- Additional Equipment: Chip conveyor, external cooling/chiller unit, handheld pendant control unit

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Isdpfxjxx Tigo Ahneig Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Ijdjytrufjpfx Ahneig Includes calibration set for table speed and applied load sensor.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 100, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 0.4 kW (0.54 HP), input frequency: 50 Hz, electrical fuse: 16 A, Product distributor with 8 outlets and cutting system for kebab strips For sale: complete stand-alone product distributor/splitter with 8 outlets, designed for the even distribution, extrusion, and cutting of kebab strips or similar meat products. The unit is sold as a stand-alone machine, complete with a support frame, pneumatic cutting system, and product conveyor belt. A vacuum filler or other dosing machine is not included. Technical specifications: Product distributor with 8 outlets Splitter model: 160/76/8/DN32 Separate eccentric impeller pump system per outlet Rotors interconnected via a central drive shaft Main housing and impellers made of stainless steel Rotors and rings made of wear-resistant technical polymer Standard product connection: DN65, length approximately 500 mm Outlets equipped with DN32 swivel couplings Outlets at an angle of approximately 30° Shape and dimensions of the extrusion outlets depend on the existing design Includes tools for disassembling the rotors Mobile stainless steel frame Stainless steel C-frame Suitable for positioning above a conveyor belt or packaging machine Mobile on wheels Height adjustable by approximately ±30 mm Robust and hygienic design for use in the food industry Pneumatic cutting system Cutting system for all 8 outlets Isdjzqc U Nspfx Ahnsig Pneumatically driven cutting mechanism Mounted on the front of the outlet manifold Stainless steel cutting blade Equipped with a safety guard Includes a safety microswitch Cutting cycle can be synchronized with an external vacuum filler or dosing machine Product conveyor belt Stainless steel construction Variable belt speed Length: approximately 1,000 mm Working height: approximately 900 mm ±50 mm Width adjusted to the 8 product outlets Includes an electrical and pneumatic switch cabinet Equipped with a safety guard and safety switches Suitable for: Kebab strips Meat strips Ground meat and meat products Production across 8 uniform lanes Automatic loading onto a conveyor belt or packaging line

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical specifications of the DOOSAN LYNX 220A metal lathe swing over bed: 510 mm maximum turning diameter: 320 mm recommended turning diameter: 170 mm maximum turning length: 322 mm bar diameter: 45 mm X-axis travel: 175 (160+15) mm Z-axis travel: 160 mm rapid traverse rate in X/Z axis: 30/36 m/min spindle speed: 6000 rpm spindle bore diameter: 53 mm spindle bearing diameter: 90 mm spindle nose: A2-5 spindle drive power (30 min/continuous power): 15/11 kW chuck diameter: 6″ tool diameter: 25×25 mm boring bar diameter: 40 mm tailstock quill diameter: 65 mm tailstock quill stroke: 80 mm tailstock quill taper: MT4 X,Z axis drive power: 1.8 kW coolant pump motor power: 0.18 kW rated power: 23.68 kVA power interruption resistance: 17 kA full load current: 62.15 A short-circuit resistance: 65 kA power supply: 3x 200/220 VAC; 50/60 Hz dimensions (L x W x H): 2325 x 1600 x 1600 mm weight of DOOSAN LYNX 220 A machine: 2900 kg Equipment of the DOOSAN CNC lathe Iodpfx Ahszx S A Eonsig CNC control unit: DOOSAN FANUC i Series 12-position turret tailstock lubrication system cooling system foot switch control hydraulic unit tightly sealed work area enclosure with a lock for the front door work area lighting