Used Torni Tacchi Ftc Model 51 for sale (18,843)

Condition: new, mileage: 873 km, power: 375 kW (509.86 HP), driver cabin: other, gearing type: other, Reversing camera, heated windscreen, hands-free system, 7-inch touch display for bed control, turn assist system, front axle load 8.0 t, axle ratio 2.31, start-up warning system, Apple CarPlay & Android Auto, dark dashboard, attention assist, ComfortPlus equipment package, exterior color Frozen White, tires 385/55 22.5 make Continental / rear axle 315/70 R22.5 make Continental, CB radio antenna, DAB radio, dark interior flooring, ECOTORQ engine – 510 HP, EURO 6e, electric parking brake, electric tipper control, electrohydraulic steering with three driving modes (Comfort, Balance, Direct), ready for alcohol interlock installation, driver’s seat – premium high-grade Alcantara fabric, vehicle model Ford F-Max GEN 2.0, suspension: front leaf, rear air suspension, Ford Ecotorq OD transmission – 16-speed automatic – ratio 14.107–0.823:1, rear axle 13 t, including upper bunk, instrument panel 9-inch color display, Intelligent Speed Limit Assist (ISLA), keyless start, automatic climate control – 3 comfort modes (ECO, Standard, Comfort), LED headlights, multimedia system with 12.4" touchscreen, truck-specific navigation system, new safety assistance systems: "GSR package" (General Safety Regulation), emergency brake signal, premium Alcantara upholstery black, wheelbase/variant 3600 mm, tire pressure monitoring system, spare wheel omitted, steel wheels, fifth wheel coupling with coupling height 1100 mm, entry shoe compartment with rubber seal, sun blind, sun visor, standard mirrors, spoiler package with roof spoiler and side flaps etc., auxiliary air heater, sockets (12V/24V), fuel tanks: 600 + 450 liters (F-Max Series), tanks with side covers, Technology Package 5: automatic high-beam control, active brake assist with pedestrian detection, ACC with stop & go function, active lane keeping assist, USB ports type A and C, hidden step in bumper for window/sun visor cleaning, Voith Retarder VR 115CT. Djdsy N Syuspfx Abzech Note Despite meticulous checking of all our price labels, errors can still occur. Some may arise from transmission errors in the systems of different platform providers. Mistakes on our part cannot be fully excluded either. Therefore, we wish to point out that all information is provided without guarantee and does not constitute any legal claim. A price declaration cannot be considered a contractual component. If you place special value on a particular feature stated in our listing, please inform us at the time of contract conclusion. Thank you for your understanding!

Condition: used, turning diameter over bed 660 mm turning diameter over slide rest 450 mm turning length 2000- 2880 mm throat Ø 1200 x 880 mm Height of centres 330 mm spindle passage 85 mm turning speed range 10- 700 U/min tail stock MK 5 transmission ratio 24 tool holder Multifix "C" dimensions 3,5/4,4 x 1,45 x 1,1 m weight of the machine ca. 4,2 t konv. lathe with movable bed for long gap. - movable bed 880 mm - swing Ø in gap: Ø 1400 mm - 3- jaw chuck Ø 315 mm - facing plate Ø 800 mm - facing plate Ø 500 mm - rapid travers - some tool holders Dsdpfx Asyyqd Tobzjch

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Dedpfx Abew D E Rvszsch Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: not inspected (used), Year of construction: 1996, turning diameter over cross slide: 1,000 mm, turning length: 4,000 mm, turning diameter: 1,450 mm, spindle bore: 150 mm, rotational speed (max.): 560 rpm, overall weight: 20,000 kg, CNC NUM T Plus Capacity 4000 x 1450 mm on bed 1000 mm on cross-slide 4-jaw chuck 1200 mm Steady rest Automatic turret Set of tool holders Weight 20,000 kg Dcedpfxsyzhrke Abzjh

Condition: used, functionality: fully functional, mileage: 9,80,500 km, first registration: 11/2016, fuel type: diesel, tire size: /80, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: sleeper cab, emission class: euro6, Year of construction: 2016, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, Single-owner vehicle, always and exclusively maintained by authorized DAF workshops, with invoices and complete certified documentation. MANUAL GEARBOX!!! Equipped with: High-roof cab, full aerodynamic kit, manual gearbox, Retarder + MX, alloy wheels, stationary air conditioning, double fuel tanks, air horns, practical accessories, spoilers, side skirts, retarder, white color, built-in refrigerator, front leaf springs. SERVICED REGULARLY. MILEAGE CERTIFIED AND GUARANTEED. Financing options available up to 60 installments with the best rates on the market. Possibility of additional warranty covering drivetrain and/or comprehensive coverage for 12 months. The description may mistakenly contain features that differ from the actual vehicle and should be verified on site. This listing does not constitute a contractual commitment in any way. Dodpfxjyk Trms Abzoch For further information and clarifications, please call the indicated numbers, also available via direct WhatsApp contact: Mr. Paolo Antonio Gorgoni The photo book is done on-site at our locations; therefore, the pictures are real and represent the current state of the vehicle. Please note, the system adds equipment and accessories automatically, so occasional discrepancies may appear. To ensure greater accuracy, we invite you to always verify the listed features directly with us.

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Dcsdpfxjkv Urws Abzeh Material color: yellow box profile: 80|53 x 45|25 mm Type of truss: 4 BST Step profile: H 28 mm, W 20 mm agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 900 kg, with evenly distributed load 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Further information about the pallet rack traverse: The traverse type 4 BST is used to insert chipboards, steel panels or similar, which then finish +/- flush with the upper edge of the shelf traverse. This means that there is no loss of height, and the front of the step crossbar protects the shelves or the insertion segments from damage. The crossbars are not used for pallet storage, but as picking levels; i.e. storage of cartons, small parts or similar.

Condition: good (used), Here we offer you a used shelf connectorf. Link 51 double shelving rows for sale. The shelf connectors are designed for a shelf distance of approx. 400 mm. Technical data to the shelf connector:Manufacturer: Link 51Type: Boltless XLIncluded in delivery:01x shelf connector used(consisting of 2 profiles)Usable for: Double shelving rowsMaterial colour: anthraciteOverall length: approx. 515 mmShelf spacing: approx. 400 mmU-profile: approx. 27 x 30 mmWeight/unit: approx. 1.321 kg /unit 04x hexagon screws, M8 x 4504x hexagon nut, M804x washers, M8 Djdpfx Asd Tyizobzsch

Condition: good (used), Here we offer you a used shelf connectorf. Link 51 double shelving rows for sale. The shelf connectors are designed for a shelf distance of approx. 300 mm. Technical data for shelf connector:Manufacturer: Link 51Type: Boltless XL Included in delivery:01x shelf connector used (consisting of 2 profiles)Suitable for: Double shelving rowsMaterial colour: anthraciteOverall length: approx. 415 mmShelf spacing: approx. 300 mmU-profile: approx. 27 x 30 mmWeight/unit: approx. 1.092 kg /unit 04x hexagon screws, M8 x 4504x hexagon nut, M804x washers, M8 Dcsdpfxed Tymds Abzjh

Condition: good (used), Here we offer you a used shelf connectorf. Link 51 double shelving rows for sale. The shelf connectors are designed for a shelf distance of approx. 650 mm. Technical data for shelf connector: Manufacturer: Link 51Type: Boltless XL Included in delivery:01x shelf connector used (consisting of 2 profiles)Suitable for: Double shelving rowsMaterial colour: anthraciteOverall length: approx. 765 mmShelf spacing: approx. 650 mmU-profile: approx. 27 x 30 mmWeight/unit: approx. 1.878 kg /unit 04x hexagon screws, M8 x 4504x hexagon nut, M804x washers, M8 Dcjdpfx Abed Typyjzsh

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow box profile: 80|53 x 45|25 mm Type of truss: 4 BST Step profile: H 28 mm, W 20 mm agraffe: 3 HK (hooks) clear width: 2.700 mm max. load per truss pair 900 kg, with evenly distributed load 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Further information about the pallet rack traverse: The traverse type 4 BST is used to insert chipboards, steel panels or similar, which then finish +/- flush with the upper edge of the shelf traverse. This means that there is no loss of height, and the front of the step crossbar protects the shelves or the insertion segments from damage. Dsdpfx Abskvnm Aozoch The crossbars are not used for pallet storage, but as picking levels; i.e. storage of cartons, small parts or similar.

Condition: new, Technical data for the base plate: Manufacturer: Link 51 Type: Boltless XL suitable for frame profile: M,H,E and S Dcederg D Awjpfx Abzeh Included in delivery: 01x base plate, new Material color: sendzimir galvanized Material thickness: 4 mm Total width: 96 mm Total depth: 137 mm Number of drill holes: 3 pcs. Drill hole Ø: 14 mm Weight: approx. 0.480 kg | pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Dcjdpfolwuw Usx Abzsh Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow type of truss: B120ZC box profile: 120x50 mm agraffe: 3 hooks clear width: 2.700 mm max. load per truss pair 2.700 kg, with evenly distributed load 02x safety pins, new execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is offered for pickup only. A desired beyond that Transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, Year of construction: 2002, Tacchi HD-1450 CNC 725 x 4000 Heavy Duty Centre Lathe (2002) with Siemens Sinumerik 828D, 1000mm Diameter 4 Jaw Double Chuck, Chuck Bore Diameter 515mm, Barrufaldi Ban 400/4 4 Way indexing Tool Post (2) x 3 Point Steadies, Tailstock, Swarf Conveyor, Centre Height 725mm, Max Swing 1450mm Distance between Centres 4000mm, Main Motor 60kw, Max Workpiece Weight 15,000kg. Country of Origin: Italy Dodpfx Asx T Ddaebzoch Location: This lot is located in Aberdeen, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: new, AEG Modicon S975 - 100 Model AS-9305-002 Processor for 984, unused, 100% functional Dcodpfx Aoi D Tu Rjbzsh

Condition: excellent (used), Labotek Type: FMD-M-M-15-15-V Model 101134 Dcedpfxewwh Evs Abzeh The Labotek FMD-M-M-15-15-V model is part of the FMD-M series by Labotek, a leading manufacturer of material drying, dosing, and conveying systems for the plastics industry. The FMD-M series comprises modular dryers designed for processing plastic granules. Technical Specifications of the FMD-M Series Model designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are specifically designed for processing plastic granules and are characterized by their modular construction, allowing flexible adaptation to a wide range of production requirements. Voltage: 3x400 Vac+PE Current: 10.4 Amp Overcurrent protection: 16 Amp Power: 2.6 kW Frequency: 50/60 Hz The Labotek AVR3G is an industrial vacuum conveyor with a 1-liter capacity, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical factors. Technical data for Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed material: Free-flowing, granular raw material (minimum grain size 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80°C Alarm function: Low material level Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data. Details are provided without obligation!) If you have further questions, we are happy to assist you by phone.

Condition: used, Four wins - The building blocks of success from DLK - Lagertechnik | Levelmaker® | Logistik | Lösungen WE OFFER Pallet rack Link 51 Partial sales of pallet frames and beams are possible. Large quantities available. Starting bay - 1 bay - length: 2,960 mm 2 frames: approx. 6,450 mm x 1,000 mm x 80 mm 8 crossbars: 2,800 mm x 90 mm x 50 mm 6 fixed anchors 16 safety pins Net price 377,75 € 2 bays - length: 5,840 mm 3 frames: approx. 6,450 mm x 1,000 mm x 80 mm Dedpetpmmijfx Abzjch 16 crossbars: 2,800 mm x 90 mm x 50 mm 9 fixed anchors 32 safety pins Net price 642,63 € 3 bays - length: 8,720 mm 4 frames: approx. 6,450 mm x 1,000 mm x 80 mm 24 crossbars: 2,800 mm x 90 mm x 50 mm 12 fixed anchors 48 safety pins Net price 907,50 € 4 bays - length: 11,600 mm 5 frames: approx. 6,450 mm x 1,000 mm x 80 mm 32 crossbars: 2,800 mm x 90 mm x 50 mm 15 fixed anchors 64 safety pins Net price 1.172,38 € 5 bays - length: 14,480 mm 6 frames: approx. 6,450 mm x 1,000 mm x 80 mm 40 crossbars: 2,800 mm x 90 mm x 50 mm 18 fixed anchors 80 safety pins Net price € 1,172.38 Other different variants possible. This is a used item. PROJECTION Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We will be happy to help you with the transportation and assembly of your goods. TERMS OF PAYMENT Terms of payment must be agreed in the event of an order. The price is understood to be the unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile warehouses and machines for trade, industry and crafts. We constantly offer you interesting second-hand offers from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES SPINDLE SPEED: 1–720 rpm CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 EXTRAS Dcjdpsyhrnujfx Abzjh OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5

Condition: good (used), AFOS Defroster Model T1000 Defrost Twin Chamber Fully stainless steel Djdpfx Absx Ey Ufszsch Complete with refrigerator unit 400 v / 80 amps

Condition: refurbished (used), Year of construction: 2020, operating hours: 144 h, functionality: fully functional, machine/vehicle number: 03, overall weight: 1,400 kg, type of input current: three-phase, temperature: 90 °C, power: 7.5 kW (10.20 HP), rotational speed (min.): 6,700 rpm, rotational speed (max.): 6,700 rpm, input voltage: 220 V, Equipment: documentation/manual, oil mist separator, rotational speed infinitely variable, GEA Westfalia Self-cleaning Separator Capacity: 100 TPD Model: RTB 45-51-076 Condition- Rebuilt Along with Control Panel & VFD Dcjdpfxsw Ralto Abzeh Tools and foundation frame (new), Pipe line fittings like Back pressure valve, Pressure switches, Pr Gauges, Sight Glass, etc (new), Commissioning Spares (new)

Year of construction: 2016, condition: excellent (used), 2016 MODEL * Capable of easily processing even tough industrial plastic waste while preserving the material's properties * Output capacity of up to 1,000 kg per hour, depending on the type * Start and stop operation with a single button Dcsdpfx Aezblm Rsbzoh * Quick and easy start and stop functionality * Saves space due to its small footprint Not only does it process all types of plastic waste, but it also easily handles bulky materials such as large bales and carpet padding without pre-sizing. It is also at the highest level in terms of efficiency. Thanks to the shredding unit that preserves the material and the optimized extrusion process, you can sustainably achieve your zero-waste goals with X (all production waste is recycled). Plastic waste is processed by a heavy-duty shredding unit that operates at a low speed to minimize loss of material properties. In this process, a hydraulic piston pushes the material to be shredded towards the shredding shaft. The shredder and extruder drives are controlled separately and automatically, depending on the load. After the shredding process, the shredded material is transferred directly to the extruder via a feed screw. In the extruder, the material is brought to a homogeneous melting temperature and, if necessary, degassed. All components are positioned close to each other to prevent oxidation of the material and to make the best use of the heat generated during the shredding process. In a single process step, the slow-rotating shredding blades grind the plastic waste, and the shredded material is continuously transferred to the extruder via the feed screw. Large, thick, or bulky waste can be processed directly, as long as it fits into the hopper, without requiring a shredding process. The control system ensures the smooth start-up of the equipment components. After an unexpected stop, it can be restarted in less than two minutes with a full hopper and a full extruder. The material level in the hopper is continuously measured, and the feed is adjusted accordingly. Uneven filling of the conveyor is possible – the NGR control unit takes care of the rest.

Year of construction: 2016, condition: excellent (used), 2016 MODEL * Capable of easily processing even tough industrial plastic waste while preserving the material's properties * Output capacity of up to 1,000 kg per hour, depending on the type * Start and stop operation with a single button Djdpfx Abszblirozoch * Quick and easy start and stop functionality * Saves space due to its small footprint Not only does it process all types of plastic waste, but it also easily handles bulky materials such as large bales and carpet padding without pre-sizing. It is also at the highest level in terms of efficiency. Thanks to the shredding unit that preserves the material and the optimized extrusion process, you can sustainably achieve your zero-waste goals with X (all production waste is recycled). Plastic waste is processed by a heavy-duty shredding unit that operates at a low speed to minimize loss of material properties. In this process, a hydraulic piston pushes the material to be shredded towards the shredding shaft. The shredder and extruder drives are controlled separately and automatically, depending on the load. After the shredding process, the shredded material is transferred directly to the extruder via a feed screw. In the extruder, the material is brought to a homogeneous melting temperature and, if necessary, degassed. All components are positioned close to each other to prevent oxidation of the material and to make the best use of the heat generated during the shredding process. In a single process step, the slow-rotating shredding blades grind the plastic waste, and the shredded material is continuously transferred to the extruder via the feed screw. Large, thick, or bulky waste can be processed directly, as long as it fits into the hopper, without requiring a shredding process. The control system ensures the smooth start-up of the equipment components. After an unexpected stop, it can be restarted in less than two minutes with a full hopper and a full extruder. The material level in the hopper is continuously measured, and the feed is adjusted accordingly. Uneven filling of the conveyor is possible – the NGR control unit takes care of the rest.

Condition: excellent (used), Year of construction: 2013, load capacity: 235 kg, arm reach: 2,550 mm, controller model: IRC5 M2004, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Dedpfx Aewrayusbzjch The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Payload: 235 kg Arm Reach: 2550 mm Model Type: IRB6640 Controller: IRC5 Model Year: 2013 Condition: Tested & Not Painted & Battery Changed Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teach Pendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, load capacity: 180 kg, arm reach: 2,550 mm, controller model: IRC5, IRB 6600 series, with the flexible bending backwards concept, the very high wrist torque, the service friendly modular built up and the availability, significant for ABB’s robots, with focus on high production capacity, compact design and low weight, simple service and low maintenance cost. Specifications Payload: 180 kg Arm Reach: 2550 mm Model Type: IRB6600 Controller: IRC5 Condition: Axis comp and controller issue Dcodswp Irtopfx Abzeh Model Year: 2009 Operating Hours: 34.000h apprx. Included: Manipulator + IRC5 Control Cabin + All Wire Sets We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Year of construction: 2023, condition: new, INTERSONIK is established in 1988 and since then manufacturing industrial cleaning machines both ultrasonic type and sprayed type. INTERSONIK always has high standards and aims to provide solid and durable products to its customers. Ultrasonic washing machines are designed and manufactured with the 30 year of experience and engineering that belongs to INTERSONIK from A to Z. K model ultrasonic cleaning devices are perfect parts washing systems for degreasing and precise cleaning. Some Details About Ultrasonic Machines: -28 Khz ultrasonic frequency -AISI 304 or AISI 316 Stainless Steel -Automatic fill valve -Liquid level control -Pump filter Dcedpfed Iz Dnox Abzjh -Unlimited basket options -Unlimited size and number of tanks -Many other options and extras ultrasonic washing machine, ultrasonic cleaner, ultrasonic degreaser, ultrasonic for automotive, ultrasonic for coating industry, 28 Khz ultrasonic cleaner Please feel free to contact us for details and other choices.

Year of construction: 2023, condition: new, Ultrasonic filter cleaning machine, provides perfect cleaning for any type of filters. Easiest, safest and quickest method for cleaning your filters. Tailor made design for tank capacity and basket size. Constructed with AISI 304 stainless steel (AISI 316 is also available on demand) Timer for ultrasonic power. Automatic or manual liquid fill / discharge Electrical heating with resistances. 28 Khz ultrasonic power. A lot of extras and options are available. Dsdpfod Izzzox Abzsch Ultrasonic filter cleaning machine Please feel free to contact with us for other details.