Used Unbekannt Locker Changing Room Different Versions for sale (24,046)

Condition: excellent (used), ALP Personnel Lift Here we offer you an ALP personnel lift. ALP Personnel Lift PHCI 800 EU 1 Working height max. 8m, payload 140kg, for indoor and outdoor use. The ALP lift, model PHC800, is a particularly compact personnel lift that impresses with its extremely small footprint and lightweight construction. The transport dimensions are also compact, with a height of 1.98m and a width of only 0.77m, allowing the model to easily pass through a standard door. Despite this space-saving design, the PHC 800 offers high performance. The working height of the ALP lift PHC800 is 8m with a maximum payload of 140kg. The robust aluminum construction and the hot-dip galvanized chassis ensure enormous stability and maximum durability. The PHC series, like all ALP personnel lifts, is available with either hand or foot control and can be used flexibly both indoors and outdoors. Knodpfxezh U Rko Afdjb Developed and manufactured in accordance with applicable safety regulations, all PHC lifts also bear the CE mark. Areas of application: The ALP personnel lift PHC 800 can be supplied with various accessories and is therefore specifically suitable for different areas of application. Working height: 8.00 m Platform height: 6.00 m Payload: max. 140 kg Height: 1.98 m Footprint (indoor use): approx. 1.41 m x 1.39 m Footprint (outdoor use): approx. 2.43 m x 2.28 m Weight: approx. 280 kg Maintenance platform for 1 person: ALP PHCI 800 Approved for indoor and outdoor use Version EU1 Drive / Motor: Single-phase AC electric motor 230V/50Hz 1.5KW Control: 12V/13V DC Power cable: 3x1.5 Protection class: IP 55 Type: PHCI 800 EU 1 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Kjdpfxszwgxrj Afdsnb (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Condition: used, working width: 1020 mm metal sheet thickness: 1 mm upper roller-Ø: 55 mm below roller-Ø: 55 mm space needed: 1370 x 570 x 1100 mm Kodpjda I Itefx Afdonb

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. Knsdjy Tqwyopfx Afdsb The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Price 8.600 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: reconditioned (used), This Duplo DBM-120 Booklet Maker with DBM-120T Trimmer provides a compact and versatile solution for producing professionally stitched, folded and trimmed booklets. With a booklet count of approximately 217,000, the system has been fully serviced, inspected and production tested by our engineers, ensuring it is ready to go straight into production. Kjdpfx Aez D H Nhefdenb This particular machine also includes a purpose-built stand, positioning the booklet maker at a comfortable working height and making it considerably easier to operate when hand-feeding pre-collated sets. Ideal for digital printers, commercial printers and in-plant finishing departments, the DBM-120 can produce booklets at speeds of up to 2,400 booklets per hour. The system can process sets of up to 20 sheets of 80gsm, producing booklets of up to 80 pages, while the integrated DBM-120T fore-edge trimmer removes the open edge after folding to give each booklet a clean, professional finish. Key Features ✅ Approx. 217,000 booklet count ✅ Stitch, fold and trim in one production process ✅ DBM-120T automatic fore-edge trimmer ✅ Purpose-built operator stand for easier hand feeding ✅ Up to 2,400 booklets per hour ✅ Produces booklets up to 80 pages / 20 sheets of 80gsm ✅ Automatic setup for quick job changes ✅ 10 preset and 3 custom programmes ✅ Saddle stitching, side stitching, corner stitching and fold-only operation ✅ Automatic adjustment according to set thickness ✅ Fine adjustment of staple, fold and trim positions ✅ Twin staple heads ✅ 5,000 staple capacity per head ✅ Can be operated standalone or inline with compatible Duplo collators Ideal for Standalone Digital Print Production One of the advantages of this particular DBM-120 is the addition of its purpose-built stand. The stand raises the system to a practical working height, making it much more comfortable for an operator to hand-feed pre-collated sets directly into the booklet maker. This makes the system particularly well suited to short and medium-run digital booklet production, without requiring a separate collating tower. Simply print and collate the sets digitally, hand feed them into the DBM-120 and the system takes care of the stitching, folding and fore-edge trimming. Simple Automatic Setup The DBM-120 has been designed for straightforward operation and fast job changes. The operator selects the required programme and the machine automatically adjusts for the job. Fine adjustments to the staple position, fold position and trim position can then be made where required and stored for future use. With 13 programme positions, repeat jobs can be recalled quickly, helping reduce setup time and waste between different booklet formats. Professional Booklet Finishing The DBM-120 automatically stitches and folds each set to produce a consistent, securely finished booklet. The connected DBM-120T Trimmer automatically trims the fore edge of the booklet as it exits the booklet maker, removing the uneven edge created during folding and providing a clean, professional finished product. System Includes Duplo DBM-120 Booklet Maker Duplo DBM-120T Fore-Edge Trimmer Purpose-built operator stand Serviced & Tested by Glendale This DBM-120 has been fully serviced, inspected and production tested by our engineers. The complete system has been checked and tested under production conditions to ensure correct operation before being offered for sale.

Condition: used, Year of construction: 1998, functionality: fully functional, USED AUTOMATIC BAND SAW, ALSO FOR ROTATING THE ARC DEGREES, MACO BSS 360 AR. • Cast iron tape-holding arch ideal for vibration-free operation • Workpiece clamping with double vise (patented) • Clamp with programmable movable position • Arc rotation system with adjustable play (patented) SOFTWARE • 5” touch HMI, can store up to 200 programs • Programming up to five different pieces per bar (length, angles, scraps) • Automatic calculation of: mirrored piece, minimal scrap in piece change, advance for scrap in multiple-cut piece cycle • Pre-set cycle for cutting non-symmetrical sections TECHNICAL DATA • Cutting capacity 90° Ø 260 mm, 230x230 mm 45° right Ø170 mm, 150x150 mm - 45° left Ø230 mm, 230x230 mm 60° right Ø120 mm, 110x150 mm • Blade size 3150x27x0.9 mm • Blade motor 1.5-2.2 kW • Cutting speed 37/70 m/min • Single feed stroke: Hydraulic version 780 mm - Brushless 1350 mm • Dimensions (without guards) 2200x3100x1300 (h) mm Kodpfxozhuk Dj Afdenb • Weight 1450 Kg

Condition: used, Year of construction: 2011, gebraucht 2011 010192 prompt, Zwischenverkauf v Deutschland 24100 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm 40 mm Knsdoyxxyaspfx Afdeb 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments) Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Kjdpezzlhaofx Afdonb Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: used, functionality: unexamined, Hydraulic workshop press in a single-column design (C-frame). Ksdpfx Afoz A Uniodjnb Hydraulic cylinder located at the top with a pressure gauge on the press head, and a robust clamping table mounted on a stand. Folding perforated sheet metal safety guards on both sides, control panel on a support column with emergency stop. Residual travel: 1 mm, residual travel time: 49 ms, safety clearance: 98 mm. Location: Homburg (Saar), Germany. Inspection possible by appointment. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: good (used), at least 3 x roller conveyor unpowered / gravity with end piece, width 0.79m. Length approx. 8.40m - 9m - used - : Knedpfoulzytex Afdeb Price per package ex location: 850.-€ (net), dismantled, packed and loaded! The roller conveyors are sold in packages / package length: approx. 9m - 2 pieces approx. 8,40m Manufacturer: unknown, could be dematic (was installed a lot at the location) Type: unknown Year of construction: unknown Element width: approx. 0.79m Roller length: approx. 62cm Channel width: approx. 73cm Length: element lengths approx. 2.40m and 2.90m Roller diameter: approx. 4.5cm Roller spacing: small Sold without feet Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: good (used), Workshop trolley, 400kg load capacity – used - : Price per unit: €550 (net) Manufacturer: unknown, probably Fetra Model: unknown Year of manufacture: unknown Load capacity: 400kg 2 fixed castors, 2 swivel castors Wooden worktop with 3-sided edge 4 drawers 1 cabinet door Wooden top width: approx. 1.20m Depth: approx. 69cm Kodpfx Afox El Hajdsnb Height incl. worktop: 93cm Length with handle: approx. 1.30m Width of steel frame: 1.04m Cabinet door width: approx. 46cm Cabinet door height: approx. 56cm Drawer width: approx. 43cm Drawer depth: approx. 55cm Condition: good Available: immediately Location: Frankenberg / Saxony warehouse

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Kodpfxez Duvpo Afdjnb

Condition: good (used), Flange connection, V-flange -Weld neck flanges. 183 pieces -Type: DIN2633 / EN1092 26 different versions see photos parts list Kodpfx Asq N E Rqofdjnb -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock -Transport dimensions: 1200/800/H540 mm -Weight: 533 kg

Condition: good (used), Approx. 40–50 adjustable-height feet for conveyor technology – used – Ex-works price: €50 (net), dismantled, packaged and loaded! Kedpfx Aex Ebytofdjnb We reserve the right to require a minimum purchase quantity! Additional conveyor feet available on request! Manufacturer: unknown Type: unknown Year of manufacture: unknown Type 1: Profile support EL = 450 FH = 720 External width: approx. 50.5 cm Current height approx. 61 cm – adjustable in height Mounting rail: length approx. 15 cm Type 2: Lateral mounting plates Height approx. 1.45 m – height adjustable Width approx. 50 cm Condition: good Available: immediately Location: Frankenberg / Saxony warehouse

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Knsdpfoz Aquhsx Afdob Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Knjdpfx Afjzrd Tvsdsb

Condition: good (used), 8 pieces, mobile aluminium dock levellers, – used – : Price per unit ex location: Knedpfxsx R Duyo Afdsb Type 1: standard (approx. 5 pcs) only €650 (net)! Type 2: with two lateral tread plates (approx. 3 pcs) only €850 (net)! Manufacturer: unknown, possibly Altec Type: unknown, possibly HF 09 Year of manufacture: unknown Width approx. 1.50 m Length including movable ramp flaps at the ends: approx. 2.35 m Load capacity: unknown, possibly 1,800 kg Dead weight: unknown, possibly 107 kg New price approx. €1,900 (net) Condition: good Available: immediately Location: Niedernberg near Aschaffenburg

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Knjdpfx Afozudfdedob Control cabinet colour: RAL 7035 Length: 6200 mm Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Cable routing: In floor ducts Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: good (used), operating hours: 20,080 h, functionality: fully functional, machine/vehicle number: Kf262 622 E35, overall weight: 720 kg, load capacity: 12 kg, arm reach: 2,665 mm, pivoting range: 300 °, Equipment: documentation/manual, Complete automated glazing and handling solution For sale is an automated robot glazing cell with a Kawasaki 6-axis glazing robot, a Yaskawa handling robot, a CeramDetect 3.0 workpiece recognition system, a base cleaning machine, and a feeding and transport system. System overview: - Complete automated robot glazing cell for ceramic sanitaryware - Automated material flow from the feed conveyor, via workpiece recognition and carousel, to the glazing, base processing, and transfer to the transport system - Designed for different sanitaryware models - Sold as a complete process solution with robotics, recognition, and handling Glazing robot: - Manufacturer: Kawasaki Robotics. Type: KF262, 6-axis industrial robot, used for automated glazing/coating of sanitaryware Handling/transfer robot: - Manufacturer: Yaskawa Europe GmbH - Series: Motoman ES165D - Robot type: YR-ES0165D-B00 - Controller: Yaskawa DX100 - Date according to nameplate: 03.10.2013 - Power supply: 3-phase, 400 / 415 / 440 V, 50 / 60 Hz - Average power: 5.0 kVA - Full load current: 14.4 A - CE marking present - Function: automated transfer between carousel, base cleaning station, and transport system Workpiece recognition – CeramDetect 3.0: - CeramDetect 3.0 for automatic workpiece and position recognition - CeramDetect laser module and camera - Recognition in the area of the transfer from the feed conveyor to the carousel - The existing CeramDetect software is offered together with the system Base cleaning machine: - Automated base cleaning machine as part of the robot cell - Transfer and removal are carried out by the Yaskawa handling robot Other system components: - Feed conveyor for workpiece feeding - Automated transfer device from the feed conveyor to the carousel - Carousel for positioning and transferring the workpieces - Transport system for receiving the finished workpieces - Protective and safety devices - Control and electrical components of the entire system Material flow: 1. Feeding of the sanitaryware via a feed conveyor 2. Removal of the workpieces from the feed conveyor via an automatic transfer device 3. Transfer of the workpieces to the carousel 4. Workpiece recognition takes place at the transfer position using CeramDetect 5. Type and position of the workpiece are recorded for the automated glazing process 6. Transport of the workpiece on the carousel to the glazing position 7. Automatic glazing by the Kawasaki 6-axis glazing robot 8. Transfer of the workpieces by the Yaskawa handling robot to the base cleaning station Knsdpfszz Ra Ujx Afdjb 9. Transfer to the base cleaning station and subsequent removal 10. Placing the workpieces on a transport system Special advantages: - Automatic workpiece recognition and position determination - Flexible processing of different sanitaryware models - Combination of glazing robotics, automated handling, and base cleaning - Complete process cell instead of individual robot components Scope of supply and notes: - The sale includes the existing components of the described robot glazing cell - Technical documentation, circuit diagrams, robot programs, and existing software versions will be provided with the system, subject to availability - Dismantling, loading, and transport need to be coordinated Further technical details can be provided.

Condition: used, Year of construction: 2001, gebraucht 2001 010191 prompt, Zwischenverkauf v Deutschland 22100 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Kjdpfx Afjyxxygjdsnb • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 4514927-4514928, Printed manuals are available both for the SLAU 80-60 shrink wrapper and the TR 65-150 shrink tunnel. Automatic “L” sealer packaging machine, brand ULMA, model SLAU, equipped with a shrink tunnel, designed for packaging all types of products using either shrink film or non-shrink film, reaching outputs of up to 45 cycles/min. Highly versatile machine: its simple adjustment systems allow for rapid adaptation to different products to be packaged. Produces seamless packages on both the top and bottom of the product, ensuring high product visibility, whether shrink wrapping is applied or not. The SLAU was specifically designed to facilitate frequent size/format changes, and therefore features systems that enable all changes to be carried out easily and quickly, with no need for additional tools. Automatic in-line feeding via conveyor belt, featuring product separation and alignment, as well as manual belt width adjustment. Motorized 90° film reel holder, with mechanical perforation system and end-of-film detection. Kjdpfeykqhfex Afdsnb Manually adjustable former triangle height. Horizontal and vertical photocells for product detection. Three film sealing and cutting options: STD: by nichrome wire, OPC: knife or hot bar for PE films. The latter two feature electronic temperature control. Jaw opening adjustment by pneumatic actuator in three positions, increasing output with low-profile products. Sealing die equipped with safety end-pieces to prevent products from getting stuck should obstacles be encountered along the path. Belt closure system facilitates the transfer of small and/or unstable products. Sealing center alignment via jaw height adjustment. Easy-access automatic film waste rewinder with film break detector. Function and parameter control and adjustment via programmable PC. Sturdy frame built from painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Full accessibility to all components. Ventilated electrical cabinet. Guards and safety systems compliant with CE regulations. Available in both painted and stainless steel versions. --- ULMA TR 65-150 hot air tunnel, designed for film shrink-wrapping of products discharged from side-seal wrappers, bundlers, flow packers, overlap, and other types of packaging machines. High thermal efficiency tunnel, low consumption, and minimal heat loss. Robust frame built from painted rolled steel. Easily integrated into existing production lines. Fitted with wheels and adjustable-height feet. Right-to-left working direction. Electronic adjustment of temperature and conveyor speed. Homogeneous distribution system of hot air flow inside the chamber to ensure significant energy savings. Maximum insulation minimizes heat loss.

Condition: used, Year of construction: 2006, Lot of seven sturdy, used rack pallets, stackable. Dimensions approximately 320 x 120 x 120 cm (L x W x H), individual weight approximately 125 kg. Fitted with 12 mm vehicle construction board; the racks can be stored on the pallet, see photos. Payload 1.3 tons, stacking load 3.9 tons, year of manufacture 2006. Transport dimensions approximately 320 x 120 x 200 cm (L x W x H). Weight approximately 900 kg. Sold only as a complete package; the price is for all 7 pallets together. Knedpfx Aoz Dw Hkofdob

Condition: good (used), Flange connection, V-flange, pipe flange -Pipe flanges/welding neck flanges: 81 pieces -Type: DIN EN1092-1 16 different versions see photos / parts list -Material: P235 GH -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock Knodpeq Rhaqefx Afdjb -Transport dimensions: 1200/800/H200 mm -Weight: 467 kg

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets Kedpozz Rpcefx Afdjnb - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,500 h, control type: CNC control, controller manufacturer: Beckhoff, laser type: fiber laser, laser source model: MaxPhotonix, laser hours: 1,700 h, laser power: 12,000 W, sheet thickness (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, type of cooling: water, overall weight: 10,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser for sale: Machine: Songu Mach 3015 Year 2023 - Put into operation 2024 Power: 12kW MaxPhotonix laser source Size: 3x1.5m Working area Working Hours: Total run time - 105days (2520h), Total NC run time 73days (1752h) Operating system: Beckhoff PLC operated from Windows 10 CAM system: Lantek CAM, postprocessor for the machine. Easy to use and conventient. Gas system: Hoerbiger with 3 gas inlets (O2, N2 and compressed air 16BAR/Or anything else) Fully enclosed and with CE marking Safety systems: Opening the door stops the machine and changing table light barriers stop the table changing process (does not stop the machine while working) Table changer: Hydraulic table changer with two pallets. Pallets in the machine remain in the same height, tables are chain driven. Hydraulic liftin capacity 1410kg Alpha direct drive servo drivers for axises with Alpha reducer gears. Laser head: Precitec ProCutter2.0 - spares and consumables available in EU Automatic lubrication of axises and guideways Fume extractor: Donaldson - has big panel filters with automatic cleaning function. Starts when machine starts cutting. Laser frame has sectioned fume extraction system - flaps open up where the laser head is moving. Positioning speed: 100m/min, acceleration 2.4g Accuracy: Positioning +-0,05, Repositioning +-0,03 Weight: Main frame ~8800kg, loading table ~2500kg Camera inside the working area Side access from two doors, front access Elecrical cabinet mounted to the machine Cuts materials like: Mild steel, stainless, aluminium, copper, brass. Example, 20mm mild steel - cutting speed 4m/min (O2), 3mm cutting speed 28m/min (N2) High pressure air compressor: 16Bar compressor for Air cutting, cheaper function for cutting mild steel Uses NC code for cutting, part size is determined from NC and cutter compensation parameter that can be changed from the machine Machine cutting parameters - Fly cut, film burn, small contour, etc. One single parameter consists of 9 different adjustable parameters. Option for nozzle cleaning while cutting and programmable nanojoints (extra small breakaway point for part removal) Automatic focus control Automatic sheet location measuring system Kedpfsyk Uuiex Afdonb Part Stop, Contour Stop, Crash sensor, Low pressure sensors, etc MDI mode for simple sheet trimming funcion Machine bed protected from heat Waste trolleys under the main cutting area and loading table Graphical visualisation on cutting plan Alarm log files Under power, can be tested Location: Tallinn Estonia