Used eccentric presses single column 0-24t for sale (38)

Condition: excellent (used), Pressure: 10 tons Duslemnnqkshcdwysu Table size: 500x280 mm Stroke length: 155 mm

Condition: used, Eccentric Press, Köszeg (Elzett) 6.3 Tons, Used Machine Manufacturer: Köszeg (Elzett) Overall dimensions: Width: 600 mm Depth: 800 mm Height: 1600 mm Weight: 252 kg Pressing force: approx. 6.3 tons Stroke length: 130 mm Delhcdwsy R Eb Ieyjuu Table size: 280 × 170 mm

Condition: used, Eccentric Press, Crank Press, Ateliers Soenen 15T, Used Machine Manufacturer: Ateliers Soenen Type: Presse à Excentrique 15 Tonnes Dolhcjy R A Avjdwyeuu Overall dimensions: Width: 620 mm Depth: 900 mm Height: 1680 mm Weight: 581 kg Pressing force: 15 tons Stroke length (adjustable): between 10 mm and 50 mm Connecting rod adjustment: 30 mm Stroke rate: 130 strokes/minute

Condition: used, Year of construction: 1987, machine/vehicle number: 5347, pressure:10 T throat:180 mm stroke:8-60 mm no. of strokes:180 Hub/min table surface area:400 x 340 mm table height over floor:935 mm hole in the table:80 mm ram - range of adjustment:40 mm ram surface:180 x 110 mm total power requirement:1,1 kW weight of the machine ca.:0,6 t dimensions of the machine ca.:1,2 x 1,5 x 2,0 m Duelhjcxxygscdwyeu

Condition: excellent (used), functionality: fully functional, Eccentric press Inventory No. 01 Manufacturer: ter Hart Type: EP 25 Press force: 25 tons Duslhcdwszcf Hyoysu * Stroke adjustment: 6 to 60 mm * Adjustable ram: 35 mm * Table dimensions: 360 x 320 mm * Installation height: 275 mm * Overhang: 175 mm * Foot pedal operation * Connection: 1.5 kW * Weight: 850 kg * Control panel with emergency stop (2 units)

Condition: excellent (used), functionality: fully functional, Eccentric press Inv. No. 02 Manufacturer: ter Hart Type: EP 25 Pressing force: 25 tons * Stroke adjustment: 6 to 60 mm * Adjustable ram: 35 mm * Table dimensions: 360 x 320 mm * Installation height: 275 mm * Overhang: 175 mm * Foot pedal operation * Connection: 1.5 kW Djlhjzcf E Aocdwysuu * Weight: 850 kg * Control panel with emergency stop (2 units!!!)

Condition: good (used), Year of construction: 2000, pressing force: 15 t, table width: 300 mm, table length: 400 mm, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Duelhcjyc R Nmsdwysu Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment Dujlhcdoyc R Uijwyeu 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1966, condition: good (used), Machine number: 6665/66 TyP / Model: PEDV 10/II-S Pressing force: 10 t table: 450 x 300 mm ram: 190 x 140 mm ram stroke: 6 to 50 mm ram adjustment downwards: 45 mm table adjustment upwards: 140 mm Duolheh Tktiscdwyou drop-through hole: 140 mm throat: 170 mm distance table ram max.: 320 mm stroke rate: 160 /min sheet thickness single stroke: 2 mm sheet thickness continuous stroke: 1 mm power supply: 1,2 kW Accessories/equipment: Condition: good weight: 1,0 t dimensions: 900 x 850 x 2.200 mm

Condition: new, Year of construction: 2026, machine/vehicle number: 26.04.21, functionality: fully functional, Fresan FP 20P - C Frame Eccentric Press - 20 Tons (200kN) TECHNICAL DATA: Dolhcjnwfp Iodwyjuu * Power: 20 tons (200kN) * Strokes Per minute: 160 * Ram-Table Distance: 240 mm * Stroke Adjustment: 0 - 50 mm * Ram Adjustment: 40 mm * Table Dimensions: 360 x 550 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.04.21, functionality: fully functional, Fresan FP 10P - C Frame Eccentric Press - 10 Tons (100kN) TECHNICAL DATA: * Power: 10 tons (100kN) * Strokes Per minute: 200 * Ram-Table Distance: 190 mm * Stroke Adjustment: 0 - 40 mm * Ram Adjustment: 35mm * Table Dimensions: 265 x 370 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) Dujlhconvfmyodwyou * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2026, machine/vehicle number: 26.04.21, functionality: fully functional, Fresan FP 15P - C Frame Eccentric Press - 15 Tons (150kN) TECHNICAL DATA: * Power: 15 tons (150kN) * Strokes Per minute: 200 * Ram-Table Distance: 215 mm * Stroke Adjustment: 0 - 40 mm * Ram Adjustment: 40 mm * Table Dimensions: 320 x 490 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table Dolhjnvfv Nscdwyjuu * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, stroke length: 65 mm, table width: 450 mm, table length: 320 mm, ram plate width: 280 mm, ram plate length: 180 mm, total length: 1,145 mm, total width: 970 mm, total height: 1,930 mm, overall weight: 1,250 kg, Equipment: documentation/manual, Excentric Press LEN 10C. Year of manufacture: 1987 (SMERAL TRNAVA, Czech Republic). - Press force: 10 Tons, - Number of ram strokes in continuous operation: 80 or 160 /min, - Number of single strokes: 45/min and 60/min. - Adjustable ram stroke: 6–65 mm, - Adjustment range between table and ram: 45 mm, - Throat depth: 160 mm, - Distance between table and ram: 225 mm, - Table size: 450 x 320 mm, - Ram size: 280 x 180 mm, - Overall dimensions (length x width x height): 1145 x 970 x 1930 mm, - Pneumatic clutch (min. compressed air pressure: 0.4 MPa), - Motor power: 1.1/1.5 kW, Duolhcdwjy Ry Tfeyou - Press weight: 1250 kg.

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SERVICES Djlhcdwjfrzlmjyouu - EBU H 12 FT Eccentric press - Siegfried SPC control unit 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Nominal force: 120 kN Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg stroke adjustment range: 30 mm ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, power: 1.15 kW (1.56 HP), Equipment: CE marking, documentation/manual, SANGIACOMO T15 TECHNICAL SPECIFICATIONS: Press Model: T15 CE Serial Number: 11637 Year of Manufacture: 2003 Nominal Force: 150 kN Nominal Stroke: 1.8 mm Adjustable Stroke: 7÷60 mm Stop Position: TDC (Top Dead Centre) Ram Adjustment: 40 mm Stopping Time: 79 ms Strokes per Minute: 165 Safety Distance (1.6 m/s): 127 mm Maximum Die Area: 260 x 360 mm Maximum Shut Height: 226.5 mm Minimum Shut Height: 200 mm Upper Die Mass: 25 kg Duolhcey Nx Ncjdwyou Flywheel RPM at 1st: 165 Max Insertions at 1st: 70 Installed Power: 1.15 kW Voltage: 400 V Auxiliary Voltage: 24 V Working Air Pressure: 5.5÷6 bar Weight: 630 kg • Work table reconditioned on CNC machine. Complete with user manual, CE conformity certificate, and 6 months warranty (excluding electronic parts). INSTALLED NEW COMPONENTS: • Magnetic safety sensors on guards; • Flywheel bearings; • Electrical panel with touch screen;

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Accessories / Special features: Dujlhcdwey D Abfjyju • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 28800 € Duslhcswiry Uodwyou 550.08 € 20 to 1.7 mm 360 mm 550 mm 140 mm 1 - 50 mm 160 1/min 4 40 mm 35 mm 200 mm 240 mm 2.2 kW 1360 mm 1100 mm 1860 mm 1250 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations OPTION: Vibration pads € 132,--

Condition: new, Year of construction: 2025, neu 2025 070095 ca. 14 - 16 Wochen ab Auf Türkei 20100 € 385.92 € 10 to 1.4 mm 270 mm 370 mm 100 mm 1 - 40 mm 200 1/min 4 35 mm 25 mm 160 mm 180 mm 0.75 kW 1170 mm 1180 mm 1700 mm 590 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: Duolhcdwjwirqgsyeu * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations OPTIONS: vibrations pads € 132,- bolster plate € 220,- Symbolic photos, picture incl. optional available bolster plate

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 25700 € 490.87 € 15 to 1.4 mm Dslhcdewirldjwysuu 320 mm 490 mm 130 mm 1 - 40 mm 200 1/min 4 40 mm 30 mm 210 mm 215 mm 1.5 kW 1160 mm 1180 mm 1730 mm 922 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Technical data approx: - Compressive force 10 t - throat 150 mm Duslhcdoktg Dhewyou - Table size . 520 x 320 mm - Table height adjustable 160 mm - drop-through hole in table 165 x 125 mm - gr. installation height 220 mm - ram surface 240 x 150 mm - mortise in ram 30 mm - ram adjustability 40 mm - stroke adjustment 4 - 60 mm - stroke rate 130 1/min - hydr. actuated clutch - Two-hand operation - E. foot switch - separate switch cabinet - drive 380 V / 1,1 kW - space requirement approx. W 1000 x H 1800 x D 1100 mm - weight approx. 1300 kg

Condition: good (used), Year of construction: 1995, For sale Eccentric press PSM 40 T Dujlhsv Uxt Hocdwyeu The price given in the advertisement is a net price to which VAT should be added

Condition: good (used), Year of construction: 1986, Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press Dslhcoi Agynedwyouu -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Dslsv Tp D Hehcdwysuu Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: good (used), functionality: fully functional, Offered is a knee lever press/foot press including a set of calibration tools. The machine was used in the manufacture of wedding rings. The calibration tools have European ring sizes from 82-39. The press and the tools are used, but in fairly good condition. The press weighs approx. 150 kg. Djlhcdjvy Dutowyouu

Condition: good (used), Year of construction: 1965, machine/vehicle number: 951065, - pressing force: 22 t - nosing: 175 mm - stroke: 120 1/min - tappet adjustment: 50 mm - stroke adjustment: 8-80 mm Duolhcdjd Atnvjwyou - no accident prevention regulation - weight: ca. 2.000 kg