Used Wde Maspell Srl Vacuum Dryer for sale (7,840)

Condition: excellent (used), Year of construction: 2004, operating hours: 1,14,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 Godpfsrp D Uxex Anzjbn loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier Gjdsyzaamopfx Anzsbn YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds Gbjdpfx Aoyzr Nmonzen • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Gbodpfxsd Sm Dio Anzjn Max temperature: 700 C °

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 129801012, overall weight: 1,750 kg, total length: 7,400 mm, total width: 1,700 mm, total height: 2,130 mm, power: 4 kW (5.44 HP), input frequency: 50 Hz, input current: 12 A, We offer this very well-maintained vacuum pump FBSW 2012nac vacuum packaging machine, manufactured in 2012. Vacuum pump AM120 NAC for shrink film and vacuum packaging machines Length x Width x Height: 1x 3100x1700x2130 cm - 750kg 1x 4300x1700x2000 cm – 1000kg (on wheels) This is a shrink machine consisting of 2 parts. Location: 65451 Kelsterbach Collection: EXW Kelsterbach / Self-collection For sale is a high-quality vacuum pump, model AM120 NAC, manufactured in Italy, suitable for shrink film and vacuum packaging machines. Technical data Gjdpfszcyvvex Anzobn • Model: AM120 NAC • Drawing No.: 038501 • Year of manufacture: 2012 • Frequency: 50 Hz • Current consumption: 12 A • Power: 4 kW • Country of manufacture: Italy Condition The vacuum pump is in good used condition. The system is currently out of operation and switched off. Until it was shut down, it was used as intended. Other • Inspection possible by appointment. • Sale from the location 65451 Kelsterbach. • Self-collection by the buyer. If you are interested or have any questions, please contact us. _____ If you have any further questions or require more information, please send us a message or call us.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: B42523, Operating principle: The separator separates injection-molded plastic parts from the sprues by means of a rotating screw/roller, based on the different component sizes. Gbodpfx Anozau Uhozjn Condition: Like new!

Year of construction: 1996, condition: ready for operation (used), Installed power: 18.1kW, voltage: 400V, phases: 3, frequency: 50Hz, max. current consumption: 30.8A, protection rating: IP54, permissible water operating pressure: 6bar, max. water temperature: 65°C, refrigerant: R404A, refrigerant charge: 8.8kg, max. refrigerant pressure: 26bar, ambient temperature: 5-43°C, weight: 416kg, with CE marking. An inspection on site is possible. Godpfxszbl I Ie Anzebn

Condition: new, functionality: fully functional, Year of construction: 2022, A mobile, diesel-powered construction concrete pump used to transport and convey liquid concrete or similar materials (such as micro-concrete, structural mortar or shotcrete) on a construction site — especially where it is difficult to place the concrete manually or where the concrete must be transported over long distances to the formwork or structural site. Godpjy It Udsfx Anzebn

Condition: excellent (used), I sell the pump FEZER 016-118 94213 - Pump in bdb condition. - Capacity 16m3/H Gjdpfx Aoud Ryrjnzobn

Condition: good (used), functionality: fully functional, Year of construction: 2012, MG SRL MH 316 C 4 Roll Plate Rolling Machine- Year 2012. 4-roll plate bending machine. 3000 mm up to 16 mm. Upper roll diameter 340 mm. Lower and lateral rolls 310 mm. Gjdpfxozc Rkwo Anzsbn

Condition: used, functionality: fully functional, Year of construction: 2013, MG SRL AR 140 Profile Bending Ring Rollers- Year 2013. Specifications Shaft Ø140 mm Number of rolls 3 Resistance moment 130 CM³ Capacity flat 220 x 50 x R=2000 mm Horizontal and vertical Yes, Horizontal + Vertical . Gbedpfxszc N Rco Anzen Stroke X-Axis 400 mm Capacity Tube 180 x 4 x R=4000 Ø x mm Capacity bar 80 x 80 x R=1000 mm Capacity HEA-Profile 180 x R=1800 mm. Dimensions Length 2100 mm Width 1900 mm Height 2100 mm Weight 6500 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2018, KS Schulten glasslifter KS-280, like new. Gsdpfx Ajvx T Exjnzobn

Year of construction: 2021, operating hours: 227 h, condition: excellent (used), functionality: fully functional, The HF machine was used for welding PVC tarpaulins. Maximum welding area: 4 cm x 100 cm. Current welding stamp sizes: 2 cm x 100 cm and 2 cm x 50 cm, in use since 02/2022. Gjdpfx Aezbb Tmsnzobn

Condition: used, 85879, S1500SN, Leybold Vacuum Turbostream, vacuum pump, Rev2006 AB, SN: S30000625916 Model: 85879 Godpfx Aohc Tldjnzebn Type: S 1500 SN Condition: Used

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump with frequency converter Model: 800040V1444 Type: TURBOVAC T1600 Condition: Used Note on condition: Gbsdpfxsrfxgbs Anzon free of contamination

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- Gjdpezcf Dlefx Anzobn 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Gsdpfxswhkywe Anzobn

Condition: used, Year of construction: 2017, • Manufacturer: AGI • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor • Machine category: Prepress equipment for flexographic printing • Max. plate size: DIN A3 (297 mm x 420 mm) • Application: Processing and developing photopolymer plates Gbjdpfxowv Eazj Anzen • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops • Condition: Very well maintained, immediately ready for operation

Year of construction: 2004, condition: used, functionality: unexamined, Semi-automatic flocking system Manufacturer: AIGLE Macchine srl The system is used to coat various materials. It can also be used as a painting system. In this particular case, the interior parts of car glove boxes were coated. The glove boxes were hung on a conveyor belt and first sprayed manually with glue. The boxes were then sprayed with flocking material in the individual flocking booths. The spray direction changes depending on the station. After the 4 flocking booths there are 2 cleaning booths. The blown, unbonded fibers are then reintroduced into the coating process via the flock distribution system. Similarly, the unbonded fibers from the four flocking booths are returned to the process. Cabin dimensions: Width: 2100 mm Depth: 2300 mm Height: 3260 mm Lock door Width: approx. 880 mm Height: approx. 750 mm Productivity: 1000 - 1500 pieces in 8 hours depending on shape and materials Voltage: 400 Volt 50 Hz Installed electrical power: 26 kW Gsdpfjv Izr Ejx Anzjbn Electric power supply: 480 V 60 Hz Space requirement for chain belt flocking system approx. 16 x 5 m Machine dismantled and assembled in the warehouse. The machine was operational until the last day of operation.

Condition: used, Year of construction: 2023, New PET filling monoblock for CSD up to 15000 bph System Overview: The “Unibloc 50 50 10” model by UBL SRL is an integrated bottling system, designed to operate with a maximum capacity of 15000 BPH. Its architecture combines three main functions: rinsing, filling and closing in a single monobloc. Rotary Rinse in the New filling monoblock for CSD: The rinsing section includes 50 heads, configured to process PET bottles. The design allows for effective and rapid washing, essential for maintaining hygiene standards. Counterpressure Filling: The filling module uses 50 isobaric valves to ensure uniform and precise filling. The isobaric system is particularly advantageous for carbonated drinks such as soft drinks and sparkling water, minimizing the loss of CO2 during filling. Screw Closure: The sealing section is equipped with 10 rotary heads for applying plastic screw caps. This mechanism ensures reliable and consistent closure, operating clockwise for greater efficiency. Control and Automation: The monoblock is equipped with a PLC/HMI control system produced by Schneider, which allows precise and facilitated management of the process. The integration of an electronic BPM meter and flow sensors at the inlet and outlet further improves operational efficiency. Configuration and Adaptability: The system is configured to handle 500ml PET bottles, but its construction allows modifications to accommodate various bottle sizes. This flexibility is essential for businesses that operate with different products and container formats. Safety and Construction of the New filling monoblock for CSD: The design includes a stainless steel safety hood, ensuring operator safety and compliance with current regulations. Technical Conclusion: Gbsdpfx Aovgt U Asnzen The “New PET filling monoblock for CSD up to 15000 bph” is a complex and highly technological system, designed to maximize efficiency in bottling drinks in PET bottles. Its technical characteristics, from production capacity to automation solutions, make it an indispensable tool for companies seeking precision, reliability and adaptability in the bottling process.

Condition: new, Year of construction: 2011, overall weight: 1,250 kg, volume flow: 630 m³/h, power: 15 kW (20.39 HP), type of cooling: water, rotational speed (max.): 2,930 rpm, protection type (IP code): IP5K5, For sale is a new vacuum pump in original packaging: OERLIKON LEYBOLD VACUUM Technical data: Forevacuum pump station with dry-compressing forepump EXTRUVAC III SP630F NOS – New old stock Electric motor, water-cooled With VEGA VEGABAR 52 pressure transmitter With spring-closing valve from AMG-Pesch Manual in German and English Further technical details: see images Gbsdpfx Ansy D Rbmszen

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. Gedpfx Aex Dbkconzebn This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Model - RMC10. ✅ Serial number - 18109. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Year of construction: 2023, condition: new, APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - scafa gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pallet discharge line with freshly moulded products - Hydraulic unit - Electrical control panel with PLC. TECHNICAL FEATURES: - Pallet dimensions: 1240x750x45mm - Useful surface: 1100x630mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm Gsdpfxjht Uwpj Anzobn - Cycle time: 35 - 60 seconds - Total Installed power: 30,00 kW MAIN DIMENSIONS : - Width: 2,10m (without hydraulic unit and control panel) - Length: 8,00m - Height: 3,10m - The hydraulic unit and control panel are placed at the side, at a distance of 1.00m from the chassis and occupy a surface area of 2m2. - Machine mass 6,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 550 kg, total length: 1,737 mm, total width: 861 mm, total height: 735 mm, volume flow: 756 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 960 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath. Gedpfoftzuwsx Anzebn Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 630 m3 / h at 50Hz. Final vacuum: 0.1 mbar abs. Any doubts, do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 218 kg, total length: 962 mm, total width: 563 mm, total height: 420 mm, volume flow: 360 m³/h, power: 75 kW (101.97 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,720 rpm, warranty duration: 12 months, protection type (IP code): IP55, rotational speed (min.): 1,420 rpm, Rotary vane vacuum pump in oil bath. Available in stock. Completely new. 12 months warranty. Model: Marpa Vacuum MV 0300E Gbedpfoftzv Usx Anzon Nominal flow: 300 m3 / h at 50Hz. End vacuum: 0,1 mbar abs. Motor power: 7,5 Kw Any clarification, do not hesitate to contact us.