Used Wide Belt Sander Heesemann 135 for sale (15,486)

Condition: used, Year of construction: 2004, functionality: limited functionality, machine/vehicle number: AE/026727, feed rate X-axis: 9 m/min, total width: 1,640 mm, total height: 2,300 mm, total length: 2,200 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,900 kg, table height: 900 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt speed: 18 mm/s, type of input current: three-phase, grinding belt length: 2,150 mm, workpiece height (max.): 170 mm, compressed air connection: 8 bar, grinding belt width: 1,115 mm, table length: 2,100 mm, table width: 1,150 mm, power of feed motor: 2,000 W, air demand: 40 m³/h, operating pressure: 6 bar, workpiece width (max.): 1,100 mm, The machine is operational except for the sectional shoe, which requires repair or replacement. The machine will be in service until August 15, 2026. Iisdpfxey R Er Te Aqwod

Condition: excellent (used), CATALOGUE NUMBER: 6916 TECHNICAL DATA - Max. width of workpiece: 200 mm - Max. height of workpiece: 150 mm - 2 sanding units: upper – metal roller + backing pad + metal roller lower – metal roller + backing pad + metal roller from above: - metal pressure roller - sanding unit - slip metal pressure roller - cleaning brush - conveyor belt from below: - conveyor belt - 2 slip metal rollers, smooth - sanding unit - metal pressure roller - cleaning brush - output roller - electrically adjustable sanding height - pneumatic oscillation of sanding belts Iijdpfxozh H Twe Aqwjd - stepless feed rate adjustment - feed motors: 0.55 kW - main motors: 2 x 4 kW - air consumption: 6-8 bar - diameter of dust extraction nozzles: 3 x 80 mm, 1 x 120 mm - overall dimensions (L/W/H): 1800 x 2070 x 2000 mm, weight: 1422 kg - Made in Germany - Unpainted - Very good condition, used sander Net price: 22900 PLN Net price: 5452 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change if the exchange rate fluctuates significantly)

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 1 automatic belt sander with combination unit with electronic articulated pressure beam For sanding soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier plates Sanding off defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro and polyester coatings Grinding of barrier films with graphical operator terminal NC-controlled thickness adjustment from 3–150 mm Activation of the calibration roller via terminal With patented CSD articulated pressure beam for compensating for workpiece tolerances of up to 2 mm Sanding width 1100 mm Grinding belt length: 2150 mm Grinding belt speed, frequency-controlled: approx. 2–18 m/sec Grinding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt discharge 490 l/min Extraction connection: 180 mm Air requirement for grinding unit: 1,800 m³/h Required air velocity: 20 m/sec Total power requirement approx. 17 kW Weight approx. 2,000 kg Dimensions WxDxH 1840x1670x2200 mm Iisdjzk N Ddepfx Aqwsd The machine is yet to be fitted with a new feed belt Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1976, Second-hand machine Year of manufacture: 1976 Iijdpfxszk Nyro Aqwjd Features and technical specifications: - grinding from below - Material feed via rubber rollers - Non-contact control of oscillation - Quick-change pressure bar - Electric motor-driven adjustment of tool thickness with an easy-to-read display Digital display - Push-button control with contactor control - Sanding width 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width 1360 mm - Sanding belt length 1900 mm - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption approx. 180 NL/min Motor power 17.5 kW Dimensions W x D x H 1800 x 1100 x 1520 mm Weight: 2,600 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1998, Second-hand machine Year of manufacture: 1998 1 automatic belt sander with combination unit with electronic articulated pressure beam For sanding soft and hard veneers Iisdpfxszk Nxzs Aqwjd Calibration and fine sanding of solid wood Calibration of workpiece carrier plates Sanding off defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro and polyester coatings Grinding of barrier films with graphical operator terminal NC-controlled thickness adjustment from 3–150 mm Activation of the calibration roller via terminal With patented CSD articulated pressure beam for compensating for workpiece tolerances of up to 2 mm Grinding width 1350 mm Grinding belt length: 2150 mm Grinding belt speed, frequency-controlled: approx. 2–18 m/sec Grinding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt discharge 490 l/min Extraction connection: 180 mm Air requirement for grinding unit: 1,800 m³/h Required air velocity: 20 m/sec Total power requirement approx. 17 kW Weight approx. 2,500 kg Dimensions WxDxH 2090x1670x2020 mm The machine is yet to be fitted with a new pre-lift belt Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 1983, Second-hand machine Year of manufacture: 1983 Condition: fully inspected and serviced, Includes new feed belt Features and technical specifications: - Includes combination unit with contact roller and sanding shoe - with height-adjustable contact roller for calibration - with an air-cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - with pneumatic belt tensioning device - fitted with a rotating cleaning brush on the outlet side of the machine - Belt oscillation controlled by a photoelectric sensor for automatic monitoring and control of the lateral belt position to ensure even belt wear - with roller table at the inlet - with digital display for the electrically driven workpiece thickness adjustment - with additional veneer sanding beam - Includes 2 spare grinding shoes - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Clearance height: 150 mm - Main motor: 15 kW - Feed speed continuously adjustable from 2.5 to 12.5 m/min - Extraction connections: 2 x 200 mm Iijdpfx Aqszk Npmowed Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2,300 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Features and technical specifications: Grinding width: 1,100 mm Abrasive belt length: 1,900 mm Workpiece thickness: 3–150 mm Feed speeds: infinitely variable 2.5–13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 grinding shoe unit: with air-cushion grinding shoe Drives: 1. Grinding unit: 15 kW 2nd grinding unit: 15 kW 3. Grinding unit: 11 kW with table extension at the inlet with table extension at the outlet Iiedpfx Aozk Nm Soqwod Total power rating: 43 kW Extraction capacity: approx. 6,750 m³/h Air velocity: 20 m/s Compressed air connection: 6–8 bar Air consumption: approx. 30 l/min Dimensions: 1,750 x 2,740 x 1,890 mm Weight: 3,100 kg Availability: at short notice Location: 65439 Flörsheim

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Features and technical specifications: Constant working height with combined unit with steel contact roller and electronic CPS articulated pressure beam with 25 mm pitch Sanding width 1100 mm Abrasive belt length 1900 mm Workpiece thickness min./max. 3–150 mm Feed speed: infinitely variable 2.5–13 m/min Grinding unit 11 kW Paint package: - infinitely variable belt drive speed via frequency converter - Belt blow-off device - Vacuum conveyor belt with blower Control system: - Terminal with 50 programme memory slots - simple menu control via plain-text display - visual display of the active elements in the processing line - Fully automatic PLC-controlled start-up sequence for all drives - digital time and attendance recording with cleaning brush Isdpszk Nlbsfx Aqweid Roller table at the inlet Roller table at the outlet Extraction capacity 1850 ³/h Extraction connections: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection 6–8 bar Air consumption 10 l/min Weight 2,200 kg Availability: by arrangement Location: Röllbach

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS Isdpfozhvymjx Aqwsid - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: excellent (used), CATALOG NO. 7773 TECHNICAL DATA - max. working width: 900 mm Iiodezhvcnspfx Aqwed - max. working height: 160 mm - from above: - metal feed roller I unit – grooved rubber calibration roller II unit – 2x metal calibration rollers + pad - from below: - conveyor belt - pneumatic oscillation of belts - electric table lift - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6–8 bar - extraction port diameter: 2x200 mm - dimensions (LxWxH): 1850x1950x2040 mm - weight: approx. 3000 kg ADVANTAGES - Italian production - calibration sander + pad - used sander, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on 4.2 EUR exchange rate (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 2005, Number of belts: 2-belt max. Passage height: 150 mm max. Working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller, sanding shoe 1st unit: electronic individual segments 35 mm Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1370 mm Sanding belt speed of 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubber-coated contact roller 65° Shore, sanding shoe 2nd unit: electronic individual segments 35 mm Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1370 mm Sanding belt speed of 2nd unit: continuously variable 2 - 18 m/sec Belt blowing device: for 2nd unit Cleaning brushes: Yes Finish sanding possible: Yes Ijdszkh Syepfx Aqwjid Vacuum carpet: Yes Feed rate: continuously variable from 2.5 - 13 m/min Control: Touch screen, electric/pneumatic Belt oscillation: yes Infeed height: fixed (top part moves) Table display: digital Working height or table height: 900 mm Motor power: 36 kW Storage location: Nattheim

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS Iiedpfxoxqggcs Aqwed 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Iiodpfeudxchex Aqwod Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Iodpetwzyfofx Aqwjid Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2026, Perfect-2 1350 RED-L Wide belt sanding machine incl. sanding version for intermediate sanding of coatings Special price for showroom machine - in-house trade fair machine - - Robust, space-saving W-wide belt sanding machine for the highest demands. - Constant working height thanks to adjustable upper part - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level can be adjusted continuously according to a sanding grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit can be tilted 10 degrees - Parallel, spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 kW and 11 kW, 400 volts, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Belt tension, control and oscillation are pneumatic - Compressed air consumption approx. 2 l/min - Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum device for the entire work table with additional perforations of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Over-thickness protection for workpieces with feed emergency stop and lifting mechanism - Continuously adjustable chip removal rate - Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Pass height 210 mm up to 18.5 kW - Sanding belt dimensions 1350 x 2000 mm Perfect - Equipment: High-quality, swiveling acrylic glass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and saving of sanding pad elements - Electronic compensation of sanding belt grit size Iedpfx Aek Dpp Soqweid - Operating and running hour counter Coating equipment: - Continuously adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included in the machine: Foldable outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Iijdpfxegf Sw Ne Aqwjd Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Isdpfx Ajcr S Ecoqwsid Min. / max. working height 4 / 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with a negative profile Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: From stock in Bitburg - at a special price

Condition: excellent (used), functionality: fully functional, SCM Sandya 10 wide belt sander Iedszggzrjpfx Aqweid Working width: 1100 mm Working height: 3-160 mm Number of sanding units: 2 1. Metal calibrating roller 2. Combi unit with shoe Combi unit with abrasive belt blowing system Two feed speed settings Material thickness gauge Main motor power: 11 kW Dust extraction connection: 2 x 160 mm Machine weight: 1620 kg Machine dimensions: 165 x 186 x 206 cm (H)

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Iiodpozkvd Rjfx Aqwed Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: A20611RM1, working width: 1,150 mm, feed rate X-axis: 3 m/min, type of input current: three-phase, sheet thickness (max.): 150 mm, overall weight: 3,900 kg, input voltage: 400 V, nominal power (apparent): 86 kVA, compressed air connection: 6 bar, input frequency: 50 Hz, workpiece width (max.): 1,150 mm, grinding width: 1,150 mm, height adjustment type: pneumatic, input current: 400 A, The COSTA MSA 2 CCCS 1150 is an industrial wide belt sander with three working units, designed for professional deburring, calibration, and superfine finishing of metal parts. It is intended for high productivity and excellent surface quality when processing steel, stainless steel, and aluminum. The machine offers adjustable speed, robust industrial design, central extraction, and the option for fine-tuning the working process to meet the needs of any metalworking company. Iiodoxugxaopfx Aqwsd

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection Ijdpfxezi Hwfs Aqwsid • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: excellent (used), Working width: 110 cm First unit: steel roller Second unit: combination – rubber roller plus pad Pneumatic belt cleaning Pneumatic oscillation with photocells Electric table height adjustment (up/down) Pneumatic belt tensioning Two feed speeds Abrasive belt size: 2200 x 1130 mm Isdpfxow Drb Ue Aqwjid Voltage: 400 V Motor: 12 kW Weight: 1542 kg Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine with two sanding belts and a cutterhead for milling Iodpjwmxh Tofx Aqwoid

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, grinding belt length: 2,150 mm, input current: 39 A, Wide belt sander SCM suitable for calibration/sanding of solid wood, veneer and lacquer base. Model: Sandya 600 RCS Working width: 1.100 mm Working thickness: 4-170 mm Main motor: 15 kW (invertor) Abbrasive belts speed: 3-16 m/s (inverter) Feeding speed: 3-18 m/min (inverter) Abbrasive belts length: 2.150 mm Aggregates: 1. Steel calibrating roller R (diam. 140 mm) 2. Combinated unit CS: - rubber coated roller (diam. 160 mm, hardness 30Sh) - elektronic sectional pad (segments width 30 mm) 3. Sanding brush ScotchBrite (diam. 150 mm) Other equipment: - 5 idle supporting rollers at infeed - 5 supporting rollersat outfeed (1st roller motorized) - version C-Plus - pneumatic exclusion of the 1st roller - pneumatic exclusion of the 2nd roller and the pad - electronic programmator LOGIC TS with LCD touch screen 10,4" - motorized height adjustment Stat of the machine: very good Isdpfx Asygddlsqweid Production year: 2016 Weight: 1.400 kg El. power: In=39A Machine availability: cca April 2026

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Industrial cross-sanding machine for high-quality surface finishing of wood, veneer, and painted workpieces. The combination of a cross-sanding and longitudinal-sanding unit enables efficient and precise processing in a continuous flow. Iiedpfjzinviox Aqwsd Processing units: 1 × Cross-sanding unit with pressure pad belt 1 × Longitudinal-sanding unit 1 × Brushing unit Technical data Technical data: Sanding width: 1,300 mm Maximum workpiece thickness: 140 mm Working height: 780–920 mm Feed rate: 4.5–22 m/min Cross-sanding belt: 4,900 × 150 mm Pressure pad belt: 4,650 × 140 mm Longitudinal-sanding belt: 2,620 × 1,350 mm Brush roller: Ø 150 mm Workpiece vacuum clamping system: 7.5 kW Total connected load: 44 kW Machine weight: approx. 3,850 kg