Used Wmw Blema-Gotha Pee Ii 250 for sale (13,233)

Year of construction: 1985, condition: good (used), 21 rolls, diameter 60 mm plate width: max. 2.000 mm plate thickness: 0,8 - 3,15 mm Rcsdpfx Ajgq Dz Ujfhod

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Rcedpfohz Ua Sex Afhod

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Rsdpfxjykl Ias Afhocd Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: used, functionality: limited functionality, Year of construction: 1982, Maximum Cutting Thickness: 16 mm (approx. 5/8") for mild steel. Maximum Cutting Width: 3150 mm (approx. 10.3 feet). Total Machine Weight: Approximately 24,000 kg (24 tons). Rcedpfx Afsykl Nkjhod Cutting Angle: Fixed at 2°. Drive Type: Mechanical drive with a robust, rigid frame construction. Hold-down System: Typically features hydraulic hold-downs to secure uneven sheets during the cutting process.

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm Rcsdov U Un Hopfx Afhsd center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 Rodpfx Afod Irazohjcd -Throughout: Ø 80 mm -Weight: 25.9 kg

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Rcedpodrwlxefx Afhod -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm Rjdpfsd Ew T Aox Afhscd -Through hole: Ø 80 mm -Weight: 18 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm Redpfsdq Tt Hsx Afhocd -Weight: 24 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Rohm, three-jaw chuck Chuck size: Ø 250 mm -Type: DH-B / 8-250 x 3 TGL 30-2332 -Throughout: Ø 40 mm - Hole circle: Ø 171 mm -Shot: short taper 8 Rjdpfjg Rcy Tex Afhscd -Weight: 24 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm Rcodpfx Aod Itcqofhod -Weight: 20.7 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg Rcjdpfxob Encco Afhsd

Condition: good (used), Year of construction: 1994, pressing force: 250 t, stroke length: 500 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Rsdpfjzlnndsx Afhscd Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, Year of construction: 1978, x-travel 820/850 mm y-travel 300/330 mm z-travel 485/505 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1670 x 1620 x 2500 m Further techniscal detals please consider pictures Rodjxxb Htjpfx Afhecd

Condition: used, functionality: fully functional, Maximum diameter with counter support Maximum tooth width for axial milling Straight-tooth gearing Outer diameter 250 mm Outer diameter 50 - 100 mm Outer diameter 100 - 250 mm Helical gearing up to 45° Tooth helix angle Outer diameter 35 - 100 mm Outer diameter 100 - 250 mm Maximum tooth width for radial-axial milling Maximum module Maximum tooth helix angle Smallest number of teeth to be milled 190 mm 200 mm 140 mm 200 mm 240 mm 5 mm Any Tool Maximum diameter Maximum length Max. tangential feed movement of the milling cutter Max. vertical feed movement of the milling cutter Indexing table Distance between the center of the milling cutter and the center of the indexing arbor Rcodezhhcajpfx Afhod Diameter of the indexing table 140 m 165 mm 100 mm 260 mm 50 - 250 mm 300 mm 110 mm 350

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° Rcsdpfx Aju Ic Ewjfhsd *

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm Rjdpfx Aeu N E Abefhocd *

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm Rcsdpfxexna Uzo Afhod max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm Rcedpfx Afsu N A Uuohjd ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Technical details: weight of the machine approx.: 160 kg dimension machine xH: 0,58 x 0,50 x 0,3 m swivable: nein ° rotation movement: 360 Grad Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Rjdpfxeu N E Dxj Afhscd *

Condition: used, Technical details: travel -y axis: Schlitten auf Balken: 200 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 90° ° quill stroke: 80 mm turning speed range: 90 - 900 / 5 step U/min distance table - lower edge spindle: min./max.: 50 / 400 mm table surface area: Anbaufläche:760 x 200 mm table surface area: Spannfläche: 630 x 200 mm max. table load: 100 kg x-travel: Tisch längs: 320 mm z-travel: Tisch vertical 350 mm table swivelabel +/-: re/li je 30° distance table - lower edge spindle: min./max.: 50 / 400 mm feed:: Tisch: stufenlos 14 - 71 mm/min total power requirement: 4,0 kW weight approx.: 1.200 kg dimension machine xH: 1,3 x 1,5 x 1,8 m Equipped with Heidenhain DRO for X and Y travel Swiveling work spindle The feed works via variator gear. The table is swivelable. Spindle speeds operate in 3 levels via gears and in 2 levels electrically. Cooling device diverse tool holders SK40 Der Fräsbalken ist um ca. 350mm ausfahrbar. Rcjdsu Ndb Aepfx Afhjd The machine vise is not included in the delivery scope (see picture), but can be purchased additional! *

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Rodev U I Slepfx Afhscd Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm *

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 250 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 110 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 750 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 2,200 mm, total width: 1,250 mm, total height: 3,700 mm, overall weight: 8,000 kg, Hydraulic press PYE 250 SS. Manufacturer: WMW VEB Zeulenroda (Germany), year 1985. Specifications: Maximum pressing force 250 tons. Working pressure 18.6 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Downwards speed 200 mm/s. Upwards speed 220 mm/s. Power requirement 24 kW. Weight 8,500 kg. Height 3,680 mm, length 2,200 mm, width 1,250 mm. The machine is in very good technical condition. Fully overhauled. Rsdpfsvcb Tlsx Afhocd

Condition: ready for operation (used), machine/vehicle number: 13214814, functionality: fully functional, power: 11 kW (14.96 HP), type of input current: three-phase, pressing force: 250 t, year of last overhaul: 2010, Equipment: documentation/manual, Hydraulic press, 250 tons – fully functional, manufactured in former East Germany (DDR), model VEB Wema Zeulenroda. Rjdpozbyxnjfx Afhecd

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Rcsdpfxjv T Nqaj Afhod Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm