Used Wmw Blema-Gotha Pee Ii 250 for sale (13,621)

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm Godpfx Apou Nfino Dsbu surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device Gbodju Nfklepfx Ap Dsu *

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm Gedpfeu N Dfhex Ap Dsbu adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: good (used), Year of construction: 1975, pressing force: 250 t, stroke length: 140 mm, throat depth: 400 mm, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Gbjdpfxsz Rnnyo Ap Dju Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm Gedpfeu N Ddwex Ap Dobu *

Condition: used, Year of construction: 1965, Technical details: grinding length: 250 mm centre height over plate: 120 mm workpiece length - max.: 600 mm grinding spindle - swivable: 350 ° grinding head adjustable: 230 - 250 mm grinding diameter: 200 mm spindle revolutions per minute : 2200/3500/5200 U/min work table:: 120 × 950 mm table movement: 500 mm table - inclinable: 45 Grad dimensions of grinding wheel: 160 mm total power requirement: 0,5 kW weight of the machine ca.: 0,65 t dimension machine approx.LxWxH: 1.5 × 1.2× 1.65 m The SWU 250 is designed for sharpening and grinding various types of tools. Thanks to the adjustable tool holders and the swivelling grinding head, different tool geometries can be machined. Gsdpfsz E Hdzex Ap Djbu *

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, pressing force: 160 t, overall weight: 10,500 kg, punching force: 160 t, height adjustment type: electric, Eccentric Press ERFURT PEE(II) 160 for Sale Gsdpfoyvzzzsx Ap Debu For sale is an Erfurt PEE(II) 160 eccentric press in good condition, ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Erfurt machines are renowned for their durable construction, solid design, and dependable performance. Therefore, this model is an excellent choice for metalworking companies, workshops, manufacturing businesses, or fabrication shops seeking a proven and high-performance press. Technical specifications: - Type: Erfurt PEE(II) 160 - Design: Eccentric press - Condition: Good - Operational status: Ready for immediate use This machine impresses with its heavy-duty build and reliable functionality in industrial applications. It is perfectly suited for daily use in production and can be put into operation immediately after purchase. If interested, further information, technical details, and additional photos can be provided upon request.

Condition: used, Technical details: pressure: 160 t throat: 760 mm slide stroke: 32...140 mm distance between table / ram: 400 mm ram adjustment: 100 mm no. of strokes: 50 Hub/min table:: 760x1000x95 passage opening in table: 400x350 mm clamping surface ram: 630x850 mm clamping plate: 760x1010x92 mm total power requirement: 15 kW weight of the machine ca.: 6,2 t dimension machine xH: 2,9x1,2x3,4 m dimensions electric cabinet LxWxH: 0,8x0,45x2,1 m - via two hand control - copy of documents digital available Machine can be demonstrated under power. Gsdju Nfhqjpfx Ap Debu *

Condition: used, Year of construction: 1980, number of straightening rollers: 16, working width: 1,250 mm, sheet thickness (max.): 12 mm, overall weight: 24,825 kg, Manufactured by BLEMA GOTHA (Germany) Max sheet thickness, mm 12,5 Gjdpfxszap Rwo Ap Djbu Max sheet width, mm 1250 Number of straightening rollers: 16 Straightening speed, m/min 16 Motor capacity, kW 54 Machine weight, kg 24825 Sheet leveling machine BLEMA GOTHA UBR 12,5 x 1250 / 1-16 The WMW UBR 12.5 x 1250/1-16 is an industrial multi-roller sheet straightening machine. Machine is complete and could be prepared for immediate shipment.

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. Gbodpfju N A U Ijx Ap Dju *

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Gbedevbhv Rspfx Ap Deu Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Gbodpsz Rn A Djfx Ap Deu Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° Gedpfx Apeu Ng Nps Dsbu grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Gedpfx Apemi Rpio Debu 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: used, rated capacity 23 kW rated current 43 A voltage 400 V For sale is an electrical control cabinet, which originally belonged to the a single-column eccentric press, make Erfurt, type PEE III/160 Gbsdpfjucgniex Ap Dju

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm Gjdoz Rn Aqepfx Ap Djbu diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Year of construction: 1984, condition: good (used), 21 rolls, Ø 60 mm Gsdpsrrl Ujfx Ap Djbu strip width: max. 1.250 mm strip thickness: 0,6 - 4 mm

Condition: good (used), Year of construction: 1978, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Gbsdsz Iyy Iepfx Ap Dju Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, Technical details: intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m conrods for mechanic press PEE 250 trapezoid thread dia. 146x14mm Godpfxju Nurxj Ap Debu *

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit. Gsdpfxjzaz Uze Ap Dobu

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock Gsdpfx Aevbh N Rjp Dsbu with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250X800 No. 262122/42 Long thread and spline milling machine, also for gear hobbing. (Thread milling and spline shaft hobbing machine) Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm over the bed/support) Gbodpfxozxqbys Ap Dou Milling length (Z-axis): 800 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Machine weight: Approx. 3,400 kg

Condition: good (used), Universal tool grinding machine Stock number: 3136 Manufacturer: WMW (Gotha) Year of manufacture: 1976 Type: SWU 250-I Machine number: 201/76 Working area Maximum workpiece length: 600 mm Maximum workpiece diameter: 250 mm Maximum disc cutter diameter: 360 mm Maximum grinding length: 450 mm Table Table travel, longitudinal, manual: 500 mm Table travel, longitudinal, automatic: - Table swivel: 0-90° Working surface: 120 x 950 mm Taper in the universal chuck: MK 5 Taper in the tailstock: MK 2 Grinding spindle Grinding spindle head height adjustment: 250 mm Cross travel: 230 mm Rotatable: 350° Tiltable: 15° Maximum disc diameter: 160 mm Grinding spindle speeds: 2200/3500/5200 rpm Power consumption: 1.8 kW Condition: good Accessories/Equipment: extensive accessories – see pictures Godpozx D U Tjfx Ap Dsbu Dimensions and weights Space requirement: 1,300 x 2,000 mm Machine weight: 0.9 t

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Gbsdpfx Apozil S Is Dou Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2007, Make: MAZAK Type of machine: QuickTurn Nexus 250-II Gedpsy I Uviefx Ap Dobu Year of manufacture: 2007 Control system: Mazatrol Matrix Nexus Machine's weight: 5.200 kg Tool holder: BMT Speed range: 4.000 1/min Cutting diameter: 380 mm Turning length: 500 mm Tool turret - slots: 12 Pl. Spindle opening: 76 mm