Used Zebra Tlp 3842 Printer for sale (2,689)

Condition: excellent (used), Stratasys Objet Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D printer + cleaning glovebox Computer, monitor, software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and enable the combination of two or three base resins in a single printing process, Bsdpfxjzh Dqye Amnedd thus allowing the creation of prototypes from three materials, as well as simulating overmolding or equipping build plates with selected models. Using the triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model materials: Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Digital ABS and Digital ABS2 Wide range of light transmission values Rubber mixtures with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Tooling and fixtures Architectural models Medical models Injection molding molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the full model size (only for rigid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, SLM Solutions Type: SLM 500 Build volume (L x W x H): 500 x 280 x 365 mm (excluding substrate plate height) 3D optics configuration: Quad (4 x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm Min. feature size: 150 µm Focus diameter: 80 µm - 115 µm Max. scanning speed: 10 m/s Average protective gas consumption during the build process: 16 l/min (argon) Average protective gas consumption during the flooding process: 250 l/min (argon) Powder supply with 90 kg Electrical connection / power consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Bjdpfxjzh Dqts Amnodd We will gladly answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade fixtures, jigs, tools, and end-use parts. Designed for production environments, it prints parts that are stronger than machined aluminum, at a fraction of the cost. It combines superior surface quality, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with the adaptive manufacturing technology Blacksmith, which is only available on the X7. Technical specifications: Printer features Process: Fused Filament Fabrication, Continuous Fiber Reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm accuracy Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, Fiberglass, Aramid fiber (Kevlar®), HSHT Fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill: several geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available at extra cost) Security: 2-factor authentication, org-admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 Sale from current location Condition: used Scope of supply: (See pictures) Bdodpfxjzh Dqme Amnjd one roll each of Kevlar, fiberglass and carbon fiber, 11 partially used rolls of Onyx filament (Subject to change and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x 1987 mm (W x D x H) Weight: 2300 kg 2 lasers, 400W each Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible via 2 connections for external N2 generators (optional) Build volume: 250 x 250 x 280 Layer thickness: 20-80 μm Manufacturing speed: 2-20 cm³ (depending on material and laser power) Operating conditions: 15-35 degrees Celsius Laser usage duration: Laser 1: 501 hours Laser 2: 503 hours Bdodpfx Aszh Dp Njmnod Additional equipment: Inox 200 lifting device Weight: 102 kg Max. lifting capacity: 135 kg Protection class: IP65 Wet cutting unit NA 7-11 H CL EU Zone 22 Dimensions: 800 x 480-570 x 755-850 mm Drive type: AC Power: 1.25 kW Voltage: 230 V 9.2 A Protection type: IP65 Frequency: 50 Hz Housing: Steel sheet Airflow: 130 m³/h Continuous negative pressure: -145 mbar Short-term negative pressure: -235 mbar Liquid volume: 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder automatic sieving station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Bodpfjzh Dp Aox Amnodd Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: excellent (used), Eos Type: EOS M270 Metal Laser Sintering System Laser sintering system 200 Watt Yb fiber laser Bsdpezh Dn Ejfx Amnedd Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-Theta lens, high-speed scanner The system has been upgraded to Scanlab hurrySCAN 30 for a more accurate print result. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please refer to the manufacturer. Scope of delivery: Eos M270, cooler and software Condition: used (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2016, The Durst Rho 512R is an industrial super-wide-format UV inkjet printer designed for high-volume production of banners, mesh, textiles, billboards, and other flexible media. Four colours 5 meter UV digital printer. 600.000m² In production Decommissioning and loading on truck can be organized. Installation and training available upon request. Bdodpfjzil Naox Amnjd Very good status, under Durst service contract For further specifications please refer to enclosed data sheet. Key Technical Specifications Specification Value Printing technology UV inkjet, roll-to-roll Maximum media width 5.2 m (204.7 in) Maximum print width 5.0 m (196.8 in) Printheads Durst Quadro Array 12M Drop size 12 picoliters Resolution Up to 900 dpi (some later documentation and Plus models state up to 1200 dpi) Maximum production speed 350 m²/hour Technology Variodrop variable droplet technology Ink type UV-curable Rho Roll Ink (VOC-free) Ink channels CMYK standard; optional Light Cyan, Light Magenta, White (configuration dependent) Roll capability Up to three 1.6 m rolls simultaneously Printing mode Continuous unattended roll-to-roll production Textile option Available for mesh without liner Border cutter Integrated

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Bdodpfx Amszhr Rhensd Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Year of construction: 2019, condition: used, Used machine Year of manufacture: 2019 Printing area: 2500 x 1300 mm High speed: Prints up to 25 m²/h or up to eight sheets/h (4C color configuration) in the format 2440 x 1220 mm and up to approximately 12.5 m²/h (4C+W color configuration) with simultaneous white printing New ink supply: The 1-liter ink bottles can be easily replaced from the front – making refills much faster! Simple operation – no alignment problems: Equipped with alignment pins and a printed ruler for precise positioning of the media on the printing table. The registration pins secure the media to prevent it from slipping. Thanks to the measuring scale, the layout and RIP data can be easily adjusted to the position. More flexibility thanks to direct printing, even on thick media: Printing on boards up to a height of 50 mm. Reduced banding streaks thanks to the Mimaki Advance Pass System. Special Mimaki circulation system prevents white ink from settling. Mimaki Clear Control (MCC): For glossy surfaces – to avoid dust adhesion and the formation of small air bubbles, the drying time of the ink and the intensity of the UV light are simultaneously reduced with MCC. This creates both glossy and stylish matte surfaces. In addition, the print can be embossed with several layers of clear varnish to achieve a multi-dimensional effect. Convenient ink selection - LH-100 hard UV inks for all smooth surfaces with high scratch resistance, color brilliance, and solvent resistance - LUS-150 flexible UV inks for smooth and uneven surfaces, approximately 150% deformable and therefore suitable for various substrates - White ink for backgrounding reduces light transmission - Two-layer printing with white on clear and colored surfaces - Enhancement of prints through glossy or matte varnish finish Environmentally friendly printing: No release of harmful substances through UV printing technology. Lower power consumption and longer service life thanks to UV LED lamps. RasterLink 6 - Powerful RIP supports excellent color reproduction - Various print jobs can be easily nested together - Simple and user-friendly application - Self-explanatory icons help you find your way around quickly - Thematically related RIP settings are grouped together in one window and can be saved as favorites for recurring use - The printing process is monitored directly in the main window - The software can be updated at any time via the Internet, and profiles can be downloaded or updated. Printing process: Piezo inkjet Bdsdpsy Nugqofx Amned Print head: 2 heads in staggered arrangement Max. printing format (W x L): 2500 × 1300 mm Max. media format (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg with uniform weight distribution Print resolutions: 300, 450, 600, 900, 1200 dpi Media suction: Vacuum Number of vacuum zones: 2 sections (in the X-axis) Accuracy: Absolute ± 0.3 mm or ± 0.3% of the specified distance (whichever is greater) Repeatability: ± 0.2 mm or ± 0.1% of the specified distance

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Bodpfx Amjzhlr Esnsdd Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), color A4 printers in very good condition Bsdezh I Atspfx Amnodd

Condition: excellent (used), Year of construction: 2018, EFI Vutek GS2000Lx Pro Ultradrop Superwide-format hybrid printer (flatbed + roll-to-roll) Printing technology: UV LED (“cool cure”) Designed for industrial-scale production (signage, POP, display graphics) Colour configuration: 8 colours (CMYK Lc Lm LY Lk) + white RIP: Workstation + Fiery RIP included Mileage: less than 300.000m² Printhead status: very good. In production-demo possible Decommissioning, transport and installation possible upon request. Maximum speed (Fast-4 mode): up to 186 m²/h POP quality (600 dpi): ~70 m²/h High quality (1000 dpi): ~21 m²/h Board-to-board time: < 5 seconds Bsdpfey H I Rqsx Amnedd For further technical details please refer to attached brochure

Condition: good (used), Year of construction: 2018, UV industrial super wide format digital printer for rigid media he Inca Onset X2 is a high-volume industrial UV flatbed inkjet printer designed for display graphics, POP/POS production, packaging, and specialty printing. Developed by Inca Digital Printers (later part of Agfa), the X2 is positioned as a production-class printer that combines high throughput with excellent image quality. The system is intended for medium-to-high production environments where productivity, automation, and reliability are critical. Printer is originally X3, but was converted to X2 (two channels of CMYK ) Manufacturing Year: 2018 Colour configuration: 2xCMYK RIP: not included Automation: 3/4 automated Productivity: up to 124 beds/hour Status: fully operational, 45 printheads out of 224 are required to have high quality on high speed (can be quoted). In production, fully operational demo possible Bdodjzhv T Tspfx Amnjd Decommissioning, transport and installation available upon request. For further technical details, refer to enclosed data sheet.

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Bsdpevtftqofx Amnedd Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Bdedszg Tzlepfx Amnod Weight: 350 kg (Changes and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 268 h, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, power: 0.6 kW (0.82 HP), We offer this used Zaxe Z3 3D printer, manufactured in 2024. Product name: Zaxe Z3 3D Printer Input voltage: 100 - 120 V and 200 - 240 V Bsdpfx Aezhtilomnsdd Input current: 12 A and 7.5 A Frequency: 50 - 60 Hz Power: 600 W Printing time: 268 hours If you have any questions or require further information, please send a message or contact us by phone.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: Bodpfx Ajyvhwijmnsdd - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: new, functionality: fully functional, overall weight: 160 kg, Year of construction: 2025, The JCYP3525H is a high-performance, tower-type concrete 3D printer designed for the production of precast elements, architectural components, and construction-related additive manufacturing. Delivered new directly from the manufacturer, this machine offers industrial-grade specifications at a competitive price point, significantly lower than that of European-manufactured equivalents. Key Technical Specifications Build size: 3,500 × 3,500 × 2,500 mm Machine dimensions: 2,700 × 2,500 × 2,700 mm Nozzle diameters: 20 mm / 25 mm (interchangeable, quick-release) Compatible materials: Concrete, geopolymer, cement-based mortars Layer thickness: 3–20 mm (adjustable) Print speed: 0–200 mm/s Extruder screw: 3D curved screw design for consistent material flow Material feeding: Pump-fed system with automatic PID control Drive system: Rack & pinion with servo motors (high repeatability) Extruder: Quick-disassembly design for fast cleaning and maintenance Dust protection: Bellows covers on all linear axes Installation: Easy on-site assembly design Machine Highlights ✔ Servo motor drive system – high positioning accuracy and repeatability ✔ Automatic feeding with PID control – consistent extrusion, no manual intervention ✔ 3D curved screw extruder – superior concrete homogeneity compared to standard auger designs ✔ Quick-disassembly extruder head – downtime under 10 minutes for cleaning ✔ Compatible with standard dry-mix concrete – no proprietary materials required ✔ Dust-proof bellows on all axes – suitable for outdoor and factory environments Suitable Applications Precast concrete element production Architectural facade panels and decorative elements R&D and university / testing laboratory use Geopolymer and sustainable construction material development Small-format wall sections and structural components Bdedpfeymc Szsx Amnjd Commercial Terms Condition: New Availability: In stock / lead time approx. 6–8 weeks Delivery: DAP / CIP Central Europe available CE documentation: Available upon request Training and commissioning support: Available Warranty: 12 months on mechanical and electrical components

Condition: used, Stratasys Objet Objet30 Prime V3 + Cleaning Glovebox Technical specifications: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Model materials: Transparent, rigid (VeroClear) Rigid, opaque, white (VeroWhitePlus) Rigid, opaque, blue (VeroBlue) Rigid, opaque, black (VeroBlack) Rigid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Condition: used Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and information!) Bjdpjzgcqcofx Amnjdd We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Condition: used, functionality: fully functional, Roland VersaUV LEF-12 UV-LED flatbed printer including BOFA Base Unit (extraction/filtration unit). Sold on behalf of a customer, fully functional. Printer: Bodpszicqzefx Amnsdd - Roland VersaUV LEF-12, UV-LED technology - Weight: 85 kg - Connection: 1 phase, 100–240 V, 50/60 Hz, 1.8 A - Made in Japan Base Unit (extraction): - BOFA International Ltd, model for LEF12 - Connection: 115–230 V, 50/60 Hz, 12.5 A - Date of manufacture 08/2011 Direct printing on objects, advertising technology, gadgets, packaging, and more. Location: 6112 Wattens (Tyrol). Collection only. Payment in cash upon collection or by instant bank transfer before loading/collection. Viewing by appointment. Sold on behalf of a customer.

Year of construction: 2022, condition: like new (used), New digital label printing machine Valloy Bizpress 13R. The equipment was only used for demonstration purposes. Toner-based LED printing technology Color configuration: CMYK Printing speed: 7.3 m/min Printing resolution: 1200x1200 dpi Media width: 210 - 330 mm Printing width up to 304 mm Media thickness: 50 - 350 microns (30 - 350 gsm) Media type: paper, PP, PVC, PE Eye-mark sensor for pre-printed or cut media Unwinder & rewinder max. roll diameter 450 mm Size: 1400x850x1000 mm Features: Pneumatic expandable unwinder and rewinder Web guiding system with splice table Bdodpfowwg N Tox Amnjd Media cooling system High voltage anti-static ionizer Electric tension control via magnetic powder brake Machine inspection and testing are welcome. Installation and training can be provided for an additional fee.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,368 h, power: 26 kW (35.35 HP), load capacity: 230 kg, lifting height: 16,400 mm, Equipment: all wheel drive, Diesel-powered, all-wheel-drive articulated telescopic boom lift ATN ZEBRA 16 Year of manufacture: 2017 According to the meter: 2,368 hours Bjdpfx Ajzb Etkemnedd 16.4 meters working height 9.4 meters lateral reach 26 kW Kubota engine ALL-WHEEL DRIVE - Articulated boom - Telescopic boom - Immediately ready for use - Upon request: new Austrian inspection certificate provided before delivery! Selling price: €16,900 net Affordable delivery also possible!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 9,500 h, Keyence MK-G Inkjet Printer – black & white – approximately 2 years old Two Keyence MK-G Inkjet Printers in good condition are for sale. Bdsdpfx Aezh I Aasmnsd Available: 1 black printer 1 white printer Both units are approximately 2 years old, fully functional, and in good, well-maintained condition. The printers were in use until recently and can be made available immediately. Ideal for industrial marking, product coding, and packaging printing. Available immediately. Inspection possible by appointment.

Condition: excellent (used), 3D systems Type: DT60 Print volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in Z-axis: 1.25 microns Precision in X and Y-axis: 7.5 microns Max. extruder temperature: 500 °C Max. build chamber temperature: 120 °C Nozzle diameter: 0.6 mm Other available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 print modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7" LCD touchscreen Remote monitoring Industry 4.0 compatible: WiFi, Ethernet, HotSpot, USB MMS system - Modular Maintenance System Dual filament loading Automatic filament change Heated feeder Jam detection Sensor for detecting filament end Print recovery system Liquid cooling Double-tempered glass Base fixed by vacuum High printing speed Positioning controlled via encoder Condition: used Scope of delivery: (See pictures) Bedpfx Aozd Tugjmnodd (Sale from location!) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ coating system: Process: Replaceable coater Adjustment: Self-leveling and self-correcting Layer thickness: Minimum 0.05mm, maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5 m/s Large line detection: 25 m/s Build volume: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Bedpozd Tt Asfx Amnjdd Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.