Used Zts Xonm.2000/2A-4 for sale (62,754)

Condition: new, Bernardo Hydraulic guillotine shear HSB 2000 x 4 Cutting length 2000 mm Max. sheet thickness * 4 mm Cutting angle 1° 30' Motorized backgauge 0 - 600 mm Strokes / min 12 Number of hold-down devices 8 pcs. Table height 760 mm Support arms 3 pcs. Oil tank 100 liters Motor power 4.0 kW Length 2700 mm Depth 2600 mm Height 1600 mm Weight approx. 3015 kg * Material strength 400 N/mm² Scope of delivery: - Cutting gap adjustment Kledpeqpfrmefx Ai Ejt - Cutting line lighting - Motorized NC backgauge - Front sheet supports - Lateral stop - Angle stop - Protective plate with photocells - E21S control unit - Foot pedal with emergency stop - Tool steel blade

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor Klodpfxow Da Rqo Ai Est -Manufacturer: Stöber HEW, gear motor with brake -Gearbox: Stöber Type DWO-2000-018-4 -Speed: 69 rpm -Hollow shaft: Ø 16 x 85 mm -Engine: HEW RF 63L/4-BO,4 -Power: 0.18 kW -Protection class: IP54 -Brake: 4 Nm -Dimensions: 365/140/H190 mm -Weight: 10.8 kg

Condition: used, mileage: 57,486 km, power: 75 kW (101.97 HP), first registration: 09/2014, overall weight: 4,900 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 2,450 kg, empty load weight: 2,450 kg, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: none, suspension: steel, number of seats: 2, maximum speed: 50 km/h, Equipment: additional headlights, air conditioning, cabin, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * From first owner * ONLY 57,478 km * Only 5,715 original operating hours * Condition: see photos * Hako Citymaster 2000 * Switchable four-wheel steering * 3-brush system: 2 main brushes (700mm) & 1 front brush (900mm) * Leaf vacuum at the rear * Sweeping width: 2,600 mm * Pre-spray unit – high-pressure cleaner * Track width: 1,033 mm * Ideal for pedestrian paths, walkways, cycle paths, narrow alleys, etc. * Stainless steel debris container: 1.99 m³ * Fresh water tank: 330 liters * Hydraulic high dump, tiltable up to 45° * VW 4-cylinder diesel engine * Power: 75 kW / 102 HP * Road registration for 50 km/h * 2-person full comfort cab * Air conditioning * Reversing camera * Ergonomically arranged controls * Central lubrication * Beacon lights * EasyDrive (hydrostatic drive) (SN) * Wheelbase: 1,900 mm * GVW: 4,900 kg * Curb weight: 2,450 kg * Payload: 2,450 kg * Self-propelled road sweeper, unrestricted access to all environmental zones If a new TÜV inspection is required, we are happy to provide an offer in cooperation with our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV, SP, or UVV. More trucks available on our website: We speak the following languages: German, English, Polish, Turkish Kljdpfx Aisxh Ezgj Eot Note: We offer and strongly recommend inspection and testing of the item to avoid misunderstandings regarding its condition and suitability. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is assumed for errors or inaccurate details in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: new, functionality: fully functional, Year of construction: 2026, BIKO B4 2014 Linear Four roll bending machine Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2014 Technical specifications: Number of Rolls: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 145 mm Lower roller diameter: 130 mm Side roller diameter: 130 mm Guaranteed installed power: 5.5 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 2,300 kg Length: 2,900mm Width: 900mm Height: 1,000mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 4 mm Bending performance (full working width) 3 mm from pipe diameter 725 mm Rolling capacity (full working width) 3 mm Bending performance (full working width) 2 mm from pipe diameter 190 mm Standard equipment: Linear guide system for rolls movement Extremely wide bearing blocks Needle bearing for the rolls rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Kljdpfoiinknex Ai Eet Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety trip wire with emergency stop and CE certification

Condition: as good as new (ex-display), Various bending tools for a motorized folding machine RAFAMET / OZAMECH KM 4-2000: Bending rails for the upper beam: available immediately, subject to prior sale: - KTS-20° *), Price: €485.00 net - KRN-5 *), R=5 mm, Price: €455.00 net - KRP-22.5, R=22.5 mm, Price: €495.00 net - KHT-175/30° *), H=175 mm, a=30°, Price: €1,495.00 net - Bending rails for the upper beam with delivery time: approx. 6-8 weeks after order receipt - Standard upper bar 45°, R = 1 mm, Price: €1,695.00 net Kjdobdf Ipopfx Ai Eslt Rails for the bending beam: available immediately, subject to prior sale: - Narrow bending rail for the bending beam, 20 mm, Price: €480.00 net *) These bending rails operate over 90°. Therefore, use only in conjunction with the narrow bending rail! Other bending tools for other machine sizes KM 6/2000, KM 4/3000, etc.: on request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible. Ksdpfjxxl Izex Ai Ejlt

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 1,100 kg, fork length: 1,100 mm, Forks Load Centre: 540 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Klodpfxjx N U Sms Ai Est Technical Condition: good

Condition: good (used), functionality: fully functional, GATTI SHEAR Kodpsyi Ehdofx Ai Ejlt 2000 x 3/4 USED MACHINE INTERNAL CODE: SVR 375

Condition: used, 4 pcs. Pallet roller tracks by Torwegge, new, for sale due to incorrect purchase. #0040329 Profile: 65/130/65x3 mm Pitch: 66 mm Installation height: 80 mm Load capacity per roller: 160 kg (NR200/60/10) Profile made of galvanized steel sheet U-65/130/65x3 Length: 2000 mm Storage location: Rieth Kjdpfxex Hwrwj Ai Ejlt

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Kedpfxstylguo Ai Eolt Technical data: - max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 024.0468, Offer 22569 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - bending angle approx. 0 - 135 ° - motorized stroke upper beam - max. stroke upper beam 85 mm - max. adjustment bending beam 80 mm - manual bending process is supported by eccentric weight - connection 400 V Kjdpfxjp Atvms Ai Ejlt - space requirement approx. W 3700 x H 1250 x D 450 mm - weight approx. 1700 kg

Condition: good (used), Year of construction: 1976, machine/vehicle number: 01-6262, Offer 25246 Technical specifications: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 - 135° - Bending angle lockable with end stop - Upper beam operated via lateral hand crank Klsdpfx Aew Uhamoi Eet - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending process assisted by eccentric weight - Space requirement: approx. W 3250 x H 1250 x D 450 mm - Weight: approx. 1700 kg

Condition: ready for operation (used), Fanuc A16B-3200-0042 / 02A - A16B-3200-0042/02A CPU Board, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Kodpfji D U D Rjx Ai Eelt

Condition: excellent (used), For sale: Professional lifting set: DEMAG chain hoist + VETTER travelling beam – complete kit High-quality German-made equipment, designed for industrial use. TECHNICAL DATA: Lifting capacity: 2000 kg (2 tons) Beam length: approx. 242 cm Hoist manufacturer: DEMAG Beam manufacturer: VETTER Fördertechnik Power supply: 400V, 3 phases, 50 Hz Ksdpoy A Tgcofx Ai Eelt Year of manufacture: 1997 Lifting speeds: 2-speed (slow + fast) Control: pendant remote (up/down + STOP) Chain: original, in good condition Trolley: manual (moves along the beam) DEMAG hoists are known for their industrial durability and reliability. SET INCLUDES: ✔ DEMAG chain hoist ✔ VETTER travelling beam (approx. 2.4 m) ✔ Manual trolley ✔ Control pendant (remote) ✔ Wiring ✔ Safety hook TECHNICAL CONDITION: unit in working order normal signs of use ready for operation without additional investment APPLICATIONS: workshops warehouses production halls service stations assembly work

Condition: used, mileage: 2,66,856 km, power: 250 kW (339.91 HP), first registration: 05/1997, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: yellow, gearing type: mechanical, emission class: euro2, loading space volume: 5 m³, loading space length: 4,200 mm, loading space width: 2,300 mm, loading space height: 600 mm, Equipment: ABS, all wheel drive, crane, * ABS * Analog tachograph * Heated mirrors * Roof hatch * Rear window Kedpfxsy Rbn Ro Ai Eolt * Air-sprung driver's seat * Transfer case * Off-road reduction gear * AP axles * Amber rotating beacon * Exhaust behind cab * Trailer coupling * 2-line air connection * EDC (Electronic Diesel Control) * Cruise control * Electric window lift, right side * Seat heating * Front axle differential lock * Rear axle differential lock * Steel bumper * Air dryer * Hydraulic connection for trailer * Passenger bench seat * 16-speed gearbox * Suspension: leaf spring * Payload: 6505 kg * Continuous brake: engine brake ----Special superstructure: Crane: MKG HLK 105, foldable, 4x hydraulic extension (working height approx. 14.8 m), control on both sides (right/left), 6th and 7th hydraulic circuits for rotary drive and grab operation. Read load chart: Lifts at 2.66m - 3.55t, 4.36m - 2.32t, 6.16m - 1.55t, 7.96m - 1.14t, 9.76m - 0.91t, 11.56m - 0.75t.----Body: 3-way steel tipper body, raised front wall, spring-assisted side boards left and right, lashing eyes.---- Sale exclusively to tradespeople. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see legal notice) are the basis for all purchase agreements, invoices, proforma invoices, orders, and sales discussions.

Condition: used, mileage: 2,66,856 km, power: 250 kW (339.91 HP), first registration: 05/1997, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: yellow, gearing type: mechanical, emission class: euro2, loading space volume: 5 m³, loading space length: 4,200 mm, loading space width: 2,300 mm, loading space height: 600 mm, Equipment: ABS, all wheel drive, crane, * ABS * Analog tachograph * Mirror heating * Roof hatch * Rear window * Air-suspended driver's seat * Transfer case * Off-road reduction gear * AP axles * Amber rotating beacon * Exhaust behind cab * Trailer coupling * 2-line air connection * EDC * Cruise control * Electric window regulator, right * Seat heating * Front axle differential lock * Rear axle differential lock * Steel bumper * Air dryer Klsdpjy Rbpbjfx Ai Eet * Hydraulic connection for trailer * Passenger bench seat * 16-speed * Suspension: leaf spring * Payload: 6,505 kg * Permanent brake: engine brake ----Special body: Crane: MKG HLK 105, foldable, 4x hydraulic extension (working height approx. 14.8 m), right/left operation, 6th & 7th hydraulic circuit for slewing and grab operation. Load chart reading: Lifts 3.55 t at 2.66 m, 2.32 t at 4.36 m, 1.55 t at 6.16 m, 1.14 t at 7.96 m, 0.91 t at 9.76 m, 0.75 t at 11.56 m. ----Body: 3-way steel tipper body, raised headboard, spring-assisted sideboards left & right, lashing eyes.---- Sale exclusively to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT & ACCESSORIES. All purchase agreements, invoices, pro forma invoices, orders, and sales discussions are subject to our terms and conditions (see imprint for details).

Condition: used, mileage: 13,597 km, power: 159 kW (216.18 HP), first registration: 10/1989, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,100 mm, loading space length: 5,000 mm, loading space width: 2,450 mm, loading space height: 1,650 mm, Equipment: ABS, all wheel drive, very well-maintained MB 1222 AF 4x4 as a fire hose truck SW2000 with only 13,608 km on the clock A vehicle from the NG series - extremely robust and easy to repair The cabin and body are almost rust-free - an ideal base for a long-distance travel/expedition vehicle ABS, servo, differential lock center and rear axle, tow bar ring eyelet 1.5t, 5-speed manual transmission Driver's cab with 3 seats and roof hatch Dimensions: 5000 x 2450 x 1650 (LxWxH in mm) Wheelbase (axle distance): 3600 mm Klsdpfx Ajvrapqji Est fully functional and ready to drive on request with new TÜV and H certificate +++ Errors, changes and prior sale reserved

Year of construction: 2011, operating hours: 7 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659360, From our demonstration tool inventory, tested and fully functional: Desoutter low-voltage screwdriver SLB012-A2000-S4Q-NE shut-off with push start Idle speed: 1000 / 750 min-1 Torque range: 0.20 to 1.18 Nm / 1.76 to 10.4 in.lb Output: 1/4" Length: 245 mm Kedpfx Aijv Ipx Hs Ejlt Weight without battery: 0.83 kg Other tools for industrial production and maintenance on request.

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Kedpfx Ajk Eakvsi Eelt Electrical data: -230 V -0,7 A -50 Hz -IP 65

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V Kedpjlatz Dofx Ai Eelt - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Kodpfsy Tif Nex Ai Ejlt Drive motor 22 kW

Condition: used, Hollow body granulator and secondary granulator for pre-shredded material. Rotor diameter 450 mm Rotor width 600 mm Klsdpfx Aoy Th Hfoi Ejt 3 rotor knives (diagonal cut), 2 stator knives Drive motor 22 kw

Condition: used, Year of construction: 1971, functionality: fully functional, turning diameter over bed: 900mm turning diameter over slide rest: 800 mm Kodpfx Aisy Snkns Eolt Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 min-1 dimensions (LxWxH), approx.: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements The main spindle box was completely overhauled approx. 10 years ago. The vibration-damping elements are included in the scope of delivery. The machine is from the original owner.

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of technical data to list, so I have uploaded several photos with the basic specifications for you to get an overview of the saw’s capabilities. This is a rare model equipped with a feeder (individual lengths) from 0-2000mm, and for repeat operations from 2000-9999mm. Automatic zeroing before cutting. The CNC saw head features automatic rotation of +/-60 degrees, two types of lubrication (emulsion and direct spray application). You can select between ejection of cut pieces via a small parts ejector or by a chain ejector with a drop-down function for longer and heavier sections. The safety fence assembly with IC barriers and numerous spare parts are included with the saw (not shown in the pictures as it is not currently mounted). All original documentation is provided and corresponds to the machine's serial number, ensuring straightforward installation without guesswork. Klodpfx Asyk Inpoi Eot Explanation of the issue: the saw is connected to electrical power and every individual function (of which there are many) works perfectly. The problem occurs during automatic operation, most likely due to program parameter issues (it uses the Windows platform). I have not found a suitable programmer willing to learn on my machine. Possible solution: I have contacted the saw manufacturer and they referred me to their authorized service provider, whose contact details I can supply to the prospective buyer. Estimated repair costs in Serbia range from €3000 to €5000; if you are closer to Germany or the Czech Republic, the expenses are significantly lower. Therefore, there are two price categories: if you purchase the machine as is, the listed price applies; if I resolve the issue, the price will be considerably higher. The listed price includes professional dismantling and loading onto the truck (a significant cost factor that is far from negligible); transportation is at the buyer’s expense. I hope this clarifies the current condition of the machine to some extent. Wishing you a successful purchase.

Condition: new, Forklifts and pallet trucks Jungheinrich – EFX 413 / AM 2000 X / EMC 110 / TMX 10 / BT SPE 125 Ksdpfx Aijy H Evke Eolt