Used Alup Largo 25 for sale (15,315)

Condition: good (used), Year of construction: 2004, ALUP screw compressor TYPE SCK 31-10/SON 3.12 volume flow 10 bar final pressure 22.0 KW with refrigeration dryer and boiler Nwjdpfswmwpijx Airen

Condition: used, Year of construction: 2017, operating hours: 26,400 h, machine/vehicle number: TRD128834, overall weight: 4,840 kg, power: 200 kW (271.92 HP), volume flow: 3,600 m³/h, operating pressure: 8 bar, TECHNICAL DETAILS Pressure: 8 bar Volume flow: 3,600 m³/h MACHINE DETAILS Voltage: 400 V Frequency: 55 Hz Nwedey Ia D Sjpfx Airsn Noise level: 79 dB(A) Motor manufacturer: ABB Motor power: 200 kW Motor speed: 2,983 rpm Total weight: 4,840 kg Operating hours: 26,400 h

Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft. Type / Model: GEMA QCS 03 25-310 (Powder coating booth) Year of manufacture: 2008 Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor) Condition: Used, good industrial condition Dimensions and capacity: - Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs) - Maximum workpiece size: 2500 x 800 mm - Conveyor line speed: High-capacity, 2 m/min - Exhaust air volume (booth): 16,000 Nm³/h - Cyclone dust collector extraction capacity: 8000 m³/h Nwsdpfx Ao Af I Hdoirjn - Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22 Main system components and technical specifications: 1. Surface Pre-treatment Tunnel (Recycolor Kft.): - Continuous multi-zone degreasing, (phosphating), and rinsing system. - Final rinse zone: DI (demineralized) water rinse stage. - Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination. - Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies. - Dehumidification / Exhaust: Fan extraction with droplet separator. - Control system: Fully automated PLC control. 2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System: - GEMA quick color-change booth with integrated overhead conveyor. - Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke. - Pre-touch manual spraying area at the inlet for complex geometries. - Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan. - Bottom cone with swing-out sieve unit for automatic or manual powder recycling. 3. Water Drying and Powder Curing Oven (Recycolor Kft.): - Fuel type: Natural gas - Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar) - Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar) - Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power) - Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air. - Operating temperature range: Adjustable between 60 – 220 °C.

Condition: used, Year of construction: 2010, operating hours: 11,658 h, travel distance X-axis: 150 mm, travel distance Z-axis: 470 mm, CNC Lathe Manufacturer: CMZ Model: TC 25 BTY Year of manufacture: 2010 Control system: FANUC Series 31i-Model A Nsdpfx Aijz St S Tjrswn Technical details: X-axis: 150 mm Z-axis: 470 mm Number of tool stations: 16 positions Operating hours: approx. 11,658 h Condition: Used Technical features & accessories: - 360° C-axis - Chip conveyor - Filtration system Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine mit Roboter und Reinraumausstattung Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2003 Schließkraft: 25 Tonnen Nwodpfj Afbwpsx Airon Holmabstand: HOLMLOS Schnecken DN: 18 mm Max. Hubvolumen: 20 ccm³ Spritzteilgewicht 18 g/PS Steuerung: CC200 Ausstattung: Roboter, Engel, Typ: ERC Reinraumkabine -1 x Kernzug -Ausblasventil

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 8,168 h, machine/vehicle number: Z4525-014046, load capacity: 227 kg, lifting height: 16,000 mm, overall weight: 6,280 kg, empty load weight: 6,280 kg, transport length: 5,380 mm, transport width: 2,130 mm, transport height: 2,000 mm, next inspection (TÜV): 01/2027, fuel type: diesel, fuel tank capacity: 64 l, tire size: 355/55 D20, tire condition: 100 %, drive condition: 100 %, wheelbase: 203 mm, ground clearance: 229 mm, color: blue, We are offering for sale a boom lift from our fleet, with a working height of 16 meters, which has been regularly maintained. Thanks to the continuous and regular maintenance, the machine is in excellent technical condition. Njdpfx Aj Aa Aqmsirswn The purchase price includes recently prepared inspection reports issued in the customer's name, and we also provide detailed information on the condition of the batteries. You can find the complete and detailed specifications of the machine on our website.

Condition: good (used), Year of construction: 2005, functionality: fully functional, 400 l vessel, 3.8 kW, 10 bar, with condensate drain, used as a backup compressor, good condition Price ex location Nsdpfxjybbfis Airjwn Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: good (used), Year of construction: 2005, Alup Allegro 24 Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped, and variable speed. Discharge pressure: 13.00 bar Motor power: 24.00 kW Free air delivery: 1.18 - 3.79 m³/min Njdpfx Ajwk Ekpeirewn

Condition: good (used), Year of construction: 2003, Alup Allegro 16 Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped, and variable speed. Nwedpewk E A Eefx Airsn Discharge pressure: 13.00 bar Motor power: 16.00 kW Free air delivery: 1.16 - 2.52 m³/min

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Njdpfj Ad Avwjx Airewn Machine type: Tool milling machine Manufacturer: Infratirea Oradea Type: FUS 25 Year of manufacture: 1986 Machine number: 2,628 WORKING AREA Travel X-axis: approx. 400 mm Travel Y-axis: 300 mm Travel Z-axis: 300 mm TABLE Table dimensions: 860 × 400 mm Number of slots: 6 SPINDLE Tool holder: SK 40 MACHINE DETAILS ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz DIMENSIONS AND WEIGHT Length: 1,500 mm Width: 1,200 mm Height: 1,800 mm Weight: 1,000 kg EQUIPMENT 3-axis digital display Mounted machine vise Vise jaw width: 160 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 5,294 h, load capacity: 2,500 kg, lifting height: 3,400 mm, fuel type: gas, mast type: telescopic, construction height: 2,300 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 23 x 9 -10, rear tire type: superelastic tires (black), rear tire size: 23 x 9 - 10, overall weight: 3,555 kg, total height: 2,300 mm, total length: 2,750 mm, total width: 1,200 mm, fuel: liquid petroleum gas (LPG), Equipment: sideshift, LINDE H 25 T – LPG forklifts TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 3.400 mm Closed height: 2.300 mm Nwodpfxj Abbngs Airjn Mast: Standard (2W340) Fork length: 1.200 mm Fork carriage: 2 A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 23 x 9 -10 (40%) / 23 x 9 - 10 (30%) Service weight: 3.555 kg Length: 2.750 mm Width: 1.200 mm Year of manufacture: 2008 Operating hours: 5.294 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Overhead guard cover ATTACHMENTS Sideshift, Fork positioner Internal no.: 1202075 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Year of construction: 2003, ALUP GE10 screw compressor with air dryer mounted on 270L tank, after full service Technical data: Nwedpfjyt Hr Sox Airsn capacity: 810 L/min; motor: 7.5 kW; max. pressure: 15 bar; total hours: 11,885 h year: 2003; compressor in full working order, net price: 10,700 PLN gross price: 13,161 PLN Video link below.

Condition: excellent (used), functionality: fully functional, ALUP SCK15-10 screw compressor Nsdjzmw A Hjpfx Airjwn Technical specifications: capacity: 1510 m3/min; engine: 11 kW; maximum pressure: 10 bar; operating hours: 12437 h; compressor is fully functional; net price: 5200 PLN gross price: 6396 PLN Video available below.

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Nwsdpfx Aj Adlx Ieiron

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Speed: 745 rpm Nwodpsxygbljfx Airsn Volume flow: 3455 dm³/min Motor power: 22 kW

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: NEFF Type: RHS 25 Year of manufacture: 1981 Machine number: 3,786 PRESS DATA Press force: 25 t Table dimensions: 600 × 360 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Connected power: 7.5 kW MACHINE DETAILS Nwsdpo Ad H Ttefx Airsn MACHINE DIMENSIONS Length: 1,600 mm Width: 1,200 mm Height: 2,100 mm Weight: 3,000 kg

Condition: used, mileage: 1,001 km, power: 22 kW (29.91 HP), gearing type: other, color: grey, first registration: 01/1964, Year of construction: 1964, driver cabin: other, Vehicle location: Bovenden, Nsdpfx Asvhl H Hjirjwn Working pressure 17 bar! Boiler diameter 775mm! 2x 4-cylinder single compressor 2-stage type HL1785 Z4! 2x 15 HP! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, TECHNICAL DETAILS General Information Year of manufacture: 2021 Operating hours: 3,269 h Condition: ready for operation Nwodpjz Scqajfx Airen Own weight: 4,113 kg Lifting Data Load capacity: 2,500 kg Lifting height: 3,670 mm Mast: Standard, 2W367 Fork carrier: FEM 2A Fork length: 1,200 mm Drive and Engine Drive: 4-cylinder diesel engine Fuel: Liquefied petroleum gas (LPG) Engine manufacturer: Doosan Engine model: PM02V Tires Front tires: Superelastic 23 × 9–10, 80% Rear tires: Superelastic 21 × 8–9, 50% Dimensions Overall length: 2,650 mm Overall width: 1,200 mm Overall height: 2,480 mm Height: 2,480 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: EHT Type: EHP 8-25 Year of manufacture: 1992 Machine type: Press brake Nwjdpfx As Adzr Rsiren Performance Data Press force: 800 kN Press force: 80 t Working length: 2,550 mm Bending length: 2,550 mm Frame width: 2,550 mm Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 22 V Rated current: 29 A MACHINE DETAILS Dimensions Length: 3,000 mm Width: 2,200 mm Height: 2,500 mm Weight Machine weight: 7,000 kg

Condition: excellent (used), Year of construction: 2010, Assembly line for cabinet bodies, consisting of: The Ligmatech press can be sold separately and was manufactured in 2010; the rest of the system was manufactured in 1996. Pos. 1: Assembly table with conveyor belt 2500*800mm and small parts shelf Pos. 2: Roller conveyor approx. 6000*800 Pos. 3: Glue application station for cabinet body sides with 1 glue gun Pos. 4: Roller conveyor approx. 4000x800mm Pos. 5: Cabinet body lowering station approx. 3000*800; adjustable from working height of 850mm to 300mm Pos. 6: Ligmatech cabinet body press MPH 510/25/09/S Profiline, manufactured in 2010 with automatic infeed and outfeed of cabinet bodies (belt conveyor), safety light curtain at the front Machine data: for cabinet bodies with Length: 250-2500 mm Width: 250-1000 mm Height: 150 -1400 mm Pressing force: 14 KN Positioning speed: 25 mm/s Working height: 300 mm Space requirement: 4000 x 750 x 2300 mm Weight: 2200 kg Pos. 7: Cabinet body uprighting station approx. 3000*800mm Pos. 8: Belt conveyor 4000*800 Pos. 9: Cabinet body discharge station 1200*800mm Nwodpfx Aiezi N Rusren Pos. 10: Cabinet body assembly station, height-adjustable, with belt conveyor 4000*800

Condition: excellent (used), Year of construction: 2017, ALUP SONETTO10 screw compressor, machine after service Technical data: capacity: 0.99 m3/min; motor: 7.5 kW; max. pressure: 10 bar; year: 2017; hours: 22,540 h; compressor fully functional, with warranty; Nodeyt Htispfx Airswn net price: 7,500 PLN gross price: 9,225 PLN Below is a link to a video.

Condition: good (used), Year of construction: 1995, Technical Data: * Manufacturer: Michael Weinig AG, Germany * Type: Profimat 23 (P23) * Year of Manufacture: 1995 Nwedpfj Aaw U Hjx Airen * Machine No.: see nameplate (not clearly legible) * Voltage: 380 V * Frequency: 50 Hz * CE Marking: present * Working Width: max. approx. 230 mm (typical for this model) * Machine Type: Four-sided planing and rabbeting machine * Number of Planing Spindles: 6 (based on image material) Equipment: * Six-spindle four-sided planing and rabbeting machine * Planing and profiling units for four-sided wood processing * Mechanical spindle adjustment * Digital setting display on the control panel * Analog setting displays * Electrical control panel with switches and operating elements * Mechanical pressure and guide elements * Feed system for continuous wood processing * Emergency stop switch * Multiple dust extraction connections * Soundproof hood with viewing window * Infeed and guide table Sales Notes: * Sale on behalf of a customer * On-site inspection is strongly recommended * Invoice will be issued * Used machine with signs of wear and tear consistent with age and use.

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,200 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, Equipment: 3rd hydraulic function, hydraulically sliding cabin, pallet forks, sideshift, Load capacity: 2500 kg Njdpo Afcimefx Airown Linde H 25 Diesel Mast type: Triplex, free-lift Year of manufacture: 2012 Operating hours: 4200 Lifting height: approx. 5500 mm Overall height: approx. 2480 mm Side shifter Are you looking for a different forklift or reach truck? Gas, electric, or diesel? Contact us, and we will find the right vehicle for you. Errors and prior sales excepted. Sale only to businesses, without warranty.

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0210.07382, turning length: 1,000 mm, turning diameter: 350 mm, spindle speed (max.): 3,000 rpm, chuck outer diameter: 315 mm, The Okuma LB 25 is a used CNC inclined-bed lathe, manufactured in 1988, equipped with an Okuma OSP 5020 control. According to the documentation we have, it can handle workpieces up to 1,000 mm in length and has an integrated Okuma Touch Setter. The machine comes with a chip conveyor and oil mist extraction system. It is located in the Düsseldorf area, along with an Okuma LB 15 from 1987. TECHNICAL DATA - Year of manufacture: 1988 - Control: Okuma OSP 5020 - Turning length: 1,000 mm - Turning diameter according to documentation: 350 mm (please verify on the nameplate before purchase) Nwedpfxez H Ugye Airon - Chuck diameter according to documentation: 315 mm - Spindle speed max.: 3,000 rpm - Measuring device: Okuma Touch Setter (integrated) EQUIPMENT AND ACCESSORIES - Chip conveyor Knoll 320 S-1 with coolant cleaning - Extraction system Filtermist F21/8 - Tool turret with holders (as shown in the photos) - Turning and clamping tools CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For shafts and turned parts up to 1 m in length, suitable for maintenance and contract manufacturing. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading, and transport are organized by the buyer. Upon request, we can provide contact information for freight forwarders in the region. Price upon request. Please contact us via the contact form.

Condition: excellent (used), Eccentric press Inventory No. 3687 Manufacturer: Ter Hart Type: EP 25 * Pressing force: 25 tons * Stroke adjustment: 6 - 60 mm * Adjustable ram: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 275 mm Nedpfs Advuaex Airown * Overhang: 180 mm * Foot pedal operation * Weight: 750 kg * Control panel with emergency stop * Newly painted!!!