Used Bench Vice With Ball Joint for sale (7,466)

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Kdsdpfewhdnhsx Ahhjr Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: used, mileage: 47,950 km, power: 353 kW (479.95 HP), first registration: 07/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #342 MAN TGS 26.480 6x2 -4 BL with combined high-pressure flushing and suction pressure tank body, ADR Type K 14.0 / 28 PE Body: KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Outreach on stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Extension piston with 3 locking points Kjdpfx Aoxc Sx Ishhjdr * (3,300l water / 10,600l sludge, 5,500l water / 8,200l sludge, 7,700l water / 6,000l sludge) * Suction from open waters possible "Comfort version" via cassette boom with integrated filter * Tank wagon equipment according to ADR - type class AT/FL L4BH * DISCHARGE: by a pneumatically actuated piston * SLUDGE WATER OUTLET DN 80: for pushing the dirty water back into the sewer via the boom. * Manhole DN500 Chassis: MAN TGS 26.480 * 6x2 - 4BL * TipMatic with OMSI * 470 HP / 346 kW * EURO 6e * Fuel volume 400 l * Chassis color RAL 9010 Pure White * Cab color RAL 9010 Pure White * 2x LED rotating beacons on the cab * Rear view camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550 cbm/h at 400 bar * Drive: elastic, via universal joints, V-belts and pneumatically switchable friction clutch from the vehicle engine's auxiliary drive. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Outreach on stop side 5,200 mm High-pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via universal joints, V-belts and pneumatically switchable friction clutch. * approx. 240m HD hose DN 25 * Large HD hose reel for 240m 1" DN 25, 180° swiveling * Equipped with 240m DN25 * Small HD hose reel for 80m approx. DN 13 hydraulic * Equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely adjustable height adjustment of the suction hose hydraulically via roller guide carriage * Outrigger arm for suction hose, hydraulic and telescopic, and swiveling by 180° * ADR design L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Halogen work spotlights, removable and swiveling * LED ambient lighting * Work functions remotely controlled via CAN-BUS technology * Wireless remote control with 14 functions * Hand washing facility (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7" color monitor including day/night switch * Soundproofing panel in front of the pump compartment * WATER SHORTAGE WARNING SYSTEM: with buzzer in the main switch cabinet and automatic pump shut-down. * RESIDUAL WATER DRAINAGE: pneumatic for all water-carrying parts with connection to the truck's compressed air system. * Large equipment box * Tool box * Holder for traffic cones * Vice * Ladder * Large advertising panels left and right * Manhole DN500 Technical data GGW 26,000KG * Unladen weight 18,530 KG * Length 9,280mm * Height 3,740mm * Width 2,550mm * Wheelbase 3,900mm For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: . Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any liability.

Condition: new, Year of construction: 2026, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016A Vario bench drill is a compact and functional pillar drill for metal, designed for precision drilling operations in professional and workshop applications. Featuring stepless speed control, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Key Features Stepless speed regulation – speed range from 440 to 2600 RPM allows optimal adjustment to the material being processed. Durable cast iron construction – provides high rigidity and reduces vibrations during operation. Adjustable worktable – tiltable from -45° to +45° and height-adjustable via rack-and-pinion system. Laser guide and LED lighting – ensure maximum drilling precision and user comfort. Electronic speed display – enables full real-time control of parameters. 65 mm vice included – the machine is ready to work right out of the box. Construction and Technology The Z7016A Vario bench drill for metal is built on a solid 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine’s body and worktable are made from precisely machined castings. The MT2 taper allows a wide range of tool fittings, while the 60 mm spindle travel enables deep hole drilling. With an overall height of just 870 mm, the unit is exceptionally ergonomic and portable. Precision and Performance Thanks to its 500 W (S1) / 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill allows efficient drilling in metal up to 16 mm in diameter. No need for manual gear changes – stepless speed adjustment significantly shortens setup time. The ergonomic three-arm feed handle, depth gauge, and precise spindle guidance system ensure high repeatability and hole accuracy. Applications The Z7016A Vario is a metal bench drill recommended for: Locksmith and repair workshops Maintenance departments Technical schools Small production lines and prototyping facilities Standard Equipment 65 mm vice Laser drilling guide LED work area lighting Electronic speed display Three-arm feed handle Kjdsxbzuvjpfx Ahhjdr Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Max drilling diameter 16 mm Spindle speed range 440 – 2600 RPM Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Weight 31.5 kg

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Kedpfx Ajyuyb Njhhjdr Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 420 kg Ball-bearing rotary table Quick-release vice Large material support Coolant system Including: Infeed roller conveyor 2x2000 mm Measuring unit 4000 mm on the discharge side with digital display

Condition: good (used), Year of construction: 1977, HERA UM2 folding machine Brand: HERA Year of manufacture: 1977 Type: UM 2 Kdsdpfjzupxcjx Ahhor Control type: Conventional Sheet thickness (mm): 2 mm Working width (mm): 3000 mm Machine weight (kg): 3000 kg Length (mm): 3820 mm Width (mm): 800 mm Height (mm): 1850 mm

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Kdodpfx Aoxz Dqmjhher Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, input voltage: 220 V, laser power: 6 W, total width: 320 mm, total height: 655 mm, total length: 515 mm, overall weight: 32 kg, space requirement width: 990 mm, laser wavelength: 355 nm, We offer this as new, 1h used ComMarker Omni X UV Laser Engraver with Rotary Bundle. Machine is in perfect condition, working without problems. Purchased but never needed, so it remains assembled in as new condition. Laser comes with rotary attachment for engraving rings or glass, etc. and Cutting Panel. Manufacturer: Commaker Machine Model: Omni X UV Laser Engraver with rotary bundle Machine Power: 220 V, 6W Machine Size: About 515mm*320mm*655mm Kdjdpfx Aezf Ipuohhor Package Weight: 32 kg Working area: 5.9“ × 5.9” (150mm × 150mm) (6W) Max. Processing Height: 235mm Simple operation panel, the working temperature can be adjusted according to operation need. Improves working efficiency. Includes two brackets. These are more convenient to place and take out bottles/containers. And the circulating water system can improves the working efficiency, as seen in pictures. Made of high quality stainless steel, machine can be cleaned fast and more effectively.

Condition: new, Work and assembly table New unit Year of manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a workbench top made of selected, solid red beech wood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise – even with asymmetrical loading of the table top. Kdedpfx Ajkwhwzohhsr TECHNICAL DATA Workbench top without clamps: 1,700 x 640 x 120 mm 2 clamp keys: Front clamp made of solid cast/steel construction, rear clamp robust aluminum guide (with adjustable guide prism and plastic sliding guide) Table top thickness: 120 / 60 mm Useful stroke: 300 mm Overall height ErgoPlan: 780 mm Weight of the workbench top: approx. 95 kg Weight: approx. 240 kg The attached panel on the back serves as a protective cover against shearing and as a crush protection cover. The lifting unit is concealed in the left lifting column and is therefore protected from dirt and damage. Load capacity up to 400 kg Overall height max. 1080 mm 2 bench hooks Ergoplan, consisting of aluminum round bench hooks with ball lock 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing pin, adjustable up to 200 mm workpiece thickness, 360° swiveling Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2020, Oce Arizona 2260 XT flatbed printer Color: 6C – double (CMYK, 2 White) Speed: up to 67 m²/h Resolution: 1440 dpi, 6pl Variodot Kdodpfx Aszud Skjhher Format: 2.5m x 3.05m Roll option: 2.2m Year of manufacture: 2019, installed in 2020 New generation features: Automatic cleaning print heads Register pins New user interface Low-energy UV lamp

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. Kdjdpoxc E Trjfx Ahhsr An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Condition: ready for operation (used), functionality: fully functional, mileage: 81,186 km, power: 185 kW (251.53 HP), first registration: 07/2010, fuel type: diesel, empty load weight: 9,174 kg, overall weight: 14,000 kg, axle configuration: 4x2, wheelbase: 4,350 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2010, operation weight: 9,174 kg, Equipment: ABS, differential lock, low noise, parking heater, tail-lift, trailer coupling, Truck Doka: - Iveco - Eurocargo 120E25 - EZ: 12.07.2010 - 6-cylinder 185kw diesel, 5880ccm, Euro 5 - 81.186km - Doka, 9-seater - 6-speed manual gearbox - Dif. lock - Unladen weight: 9,174 kg; permissible GG: 14,000kg - 800cm x 250cm x 366cm (lxwxh) - Wheelbase: 435cm - el. FH Kederz Nqlepfx Ahhsdr - el. mirrors - Digital tachograph - Radio/CD - Fog lights - Comfort driver's seat - cruise control Box body: - PALKIT - Case dimensions: 436cm x 250cm x 200cm (lxwxh) - Storage boxes left / right - Retractable sliding ladders right + rear Front part: - Folding bench seat - shelf installation - Parking heater - Window left - Door with window right rear part: - DHOLANDIA LBW, 1,000kg; 160cm - Ball-type trailer hitch (3,500kg) - Storage boxes / cupboards / lashing eyes - Workbench with vice - DUFLIS electro-hydraulic ladder rack / roof rack Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, Year of construction: 2018, Horizontal bandsawing machine Make: JAESPA Model: Compact 2.8 Year of construction: 2018 TECHNICAL DETAILS: Automatic band saw - horizontal Cutting diameter 280 mm Saw blade length 5080 x 34 x 1.1 mm Cutting area flat 330 x 280 mm Cutting width 330 mm NC control Feed 460 mm Cut-off lengths 9999.9 mm Kodpoudb Sfjfx Ahhodr Speed 15 - 120 m/min Machine weight approx. 2.3 t Dimensions approx. 3250 x 1580 x 2050 mm Column design for heavy-duty, industrial use o Intuitive NC control of the machine via PLC WAGO and 7" color touchscreen. Frequency-controlled, infinitely variable belt drive Saw arm with highly sensitive feed movement via servo motor and ball screw ball screw Backlash-free linear guides in both columns Hydraulic material clamping with long-stroke cylinder in front of and behind the saw blade saw band Clamping vice and lifting jaws open on both sides with infinitely adjustable clamping pressure clamping pressure Material feed via servo motor and ball screw drive in chain dimension the repeating operation is clocked. Unlimited material feed length Fully hydraulic saw blade tensioning Automatic saw blade guide arm adjustment Fully equipped with chip conveyor

Condition: used, Mechanical NC Machine Vice BISON Precision machine vice, clamp Jaw width: 150 mm Jaw height: 40 mm Clamping range: 0 to 210 mm Clamping force: approx. 3 tons Guideway height: 52 mm Guideway length: 425 mm - Mechanical machine vice - Quick adjustment with ball-locking mechanism - Clamping range via trapezoidal spindle approx. 55 mm - Robust base body, ground on all sides Kedpfx Ahsxcbpcjhedr - Can be mounted horizontally, vertically, or laterally - Guideway with 18 and 20 mm T-slot Dimensions (L x W x H): 425 x 150 x 110 mm Weight: 27 kg Good condition

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and Kdedpozkbn Ujfx Ahhjr . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Kedpfx Aexrtluehhedr Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: used, Year of construction: 1985, functionality: limited functionality, pressing force: 400 t, stroke length: 130 mm, table width: 500 mm, table length: 500 mm, overall weight: 8,500 kg, For sale knuckle-joint press type KB8336 made Stanko, effort 400 ton, year of manufacture 1985, table dimensions 500mm*500mm, stroke 130mm, total weight 8500kg. Price is 17500 Euro CIF. Kdsdpfx Ahozugawshsr

Condition: new, Year of construction: 2026, The XZ7550ZB milling and drilling machine is the perfect tool for professionals. With a simple, uncomplicated design, this machine guarantees uninterrupted work for a long period of time. With a vertical head and horizontal spindle, the XZ7550ZB offers a wide range of machining options. The ISO 40 tool clamping cone ensures robust tool clamping, while the spindle auto-feed further increases productivity and efficiency. X- and Y-axis working feeds and fast Z-axis positioning feeds enable precise machining, while the extendable vertical head spindle facilitates access to workpieces. Mechanical feed in 3 ranges and an automatic threading option add flexibility. The vertical head swivelling from 0-90° and the upper extension and swivelling bar add extra functionality and precision. Machine description AUTOMATIC ELECTRIC FEED OF THE TABLE IN THE Y AXIS AUTOMATIC MECHANICAL FEED OF THE TABLE IN THE X AXIS AUTOMATIC SPINDLE FEED HEAVY, STABLE CAST IRON CASTING VERY PRECISELY MANUFACTURED SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES IN ALL 3 AXES QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION SWIVEL HEAD +/- 90° Technical data Max. drilling diameter 50 mm Max. horizontal milling length 100 mm Max. vertical milling diameter 25 mm Max. threading diameter M16 Kdjdpfx Ahjud Ic Dshor Max. boring diameter 120 mm Spindle taper ISO 40 50Hz spindle speed range and number (rpm) 72-1800 (8) Vertical, 60-1350 Horizontal (9) Distance between spindle and column surface 200-700 mm Distance between spindle and table 100-480 mm Distance between spindle axis and table 0-380 mm Number, width and spacing of T-slots 5 / 14 mm/44 mm Spindle travel 120 mm Table size 1000x240 mm Table travel 600x230 mm Feed of table 24-720 mm/min (8 speeds) Spindle feed 0.015; 0.08; 0.25 mm/rev. Motor (vertical/horizontal) 1.5 kW/1.5 kW Overall dimensions 1120x1060x2035 mm Weight 970 kg Scope of delivery Digital readout for 3 axes SINO ISO 40 Morse bushings Drill chuck B16 CE declaration of conformity Machine vice L - 160 mm Milling machine spindle with a set of collets for finger joint cutters Horizontal spindle support / ocular / Milling arbor long. Basic tools 24 V halogen lighting system Cooling system

Condition: new, Year of construction: 2026, The 150mm Drill Vice IW150 has been designed for stable and secure clamping of workpieces during drilling, light milling and other workshop operations. The solid steel and cast steel construction, large opening and optimised jaw geometry ensure high rigidity and repeatability of clamping. This is a reliable drill vice that also works perfectly as an auxiliary milling vice for additional workshop applications. Main advantages of the IW150 drill vice Jaw width 150mm – enables secure clamping of larger workpieces and irregular shapes. Maximum opening 150mm – allows machining of a wide range of parts without additional fixtures. Cast steel body – ensures high resistance to continuous operational loads. Stable table mounting via elongated mounting slots with 160mm spacing. High structural rigidity reducing micro-vibrations during use on bench drills and auxiliary milling machines. Construction and technology The vice features a precisely machined body made of durable cast steel, characterised by excellent dimensional stability and resistance to deformation. The key functional components – guides and jaws – are made of high-quality steel, ensuring durability and wear resistance. The screw feed mechanism is optimised for smooth adjustment, allowing quick, backlash-free positioning and consistent clamping pressure. The base of the vice includes elongated 13mm mounting slots, allowing precise adjustment to different machine table layouts. Thanks to this, the IW drill vice series guarantees compatibility with a wide range of workshop machines. Precision and performance The construction parameters of the IW150 vice ensure stable clamping even during intensive machining. The flat base surface and parallel jaw alignment minimise workpiece movement, which is crucial for maintaining dimensional repeatability. The overall weight of approx. 4.2kg helps absorb vibration, improving drilling and machining accuracy. Applications The IW150 drill vice is ideal for professional metalworking facilities and maintenance departments. Its universal design allows use as: bench drill vice – for precise clamping during drilling, reaming and counterboring, milling vice – for light milling and auxiliary operations, a general-purpose clamping fixture in mechanical and metalworking workshops for routine machining and assembly tasks. Standard equipment Cast steel body Flat steel jaws, 150mm wide Elongated mounting slots for position adjustment Reinforced screw mechanism Technical data – Drill Vice IW150 Material steel, cast steel Jaw width 150mm Jaw height 24mm Maximum jaw opening 150mm Mounting hole spacing 160mm Kdedpoycqfhjfx Ahher Mounting hole width 13mm Weight approx. 4.2kg

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display Kdedozc Rv Hjpfx Ahher * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, mileage: 2,40,035 km, power: 125 kW (169.95 HP), first registration: 12/1999, fuel type: diesel, empty load weight: 4,720 kg, maximum load weight: 2,770 kg, overall weight: 7,490 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 4,150 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, total length: 8,200 mm, total width: 2,360 mm, total height: 2,650 mm, loading space length: 5,700 mm, loading space width: 2,320 mm, loading space height: 900 mm, Equipment: ABS, cabin, low noise, seat heater, trailer coupling, Vehicle location: Bovenden, license plate house, 1x air seat, double bench seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, switch 6, ABS (anti-lock braking system), lifting+lowering, rotating beacon, leaf-air suspension, tow bar ball head, noise reduction G1, lashing eyes, environmental badge red Wheelbase: 4150 mm Body: Double deck car transporter Winch: VIME type: EL , 3000kg pulling force ! Dimensions upper platue L=4400 mm, hydraulic ram repaired for approx. 1.500,- EUR, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kjdpevhg A Aefx Ahhjdr - .

Condition: used, mileage: 54,133 km, power: 96 kW (130.52 HP), fuel type: diesel, fuel: diesel, color: other, Year of construction: 2014, Equipment list: - Co-driver’s bench seat - Digital tachograph - 5-speed manual transmission - Ball-type trailer coupling - Electric windows - Central locking - Radio Kdjdpfx Aozhl Elshhsr - Platform body 4490 mm x 2036 mm x 400 mm - Tarpaulin + bows, sliding tarpaulin (left) Other notes: - Trade-in and purchase of vehicles and machinery possible. - Sale price excluding transport. - No liability for printing and typographical errors. - Errors, changes, and prior sale subject to change. - Offer subject to availability. - Photos may differ. Price applies to the current condition. - All information without guarantee.

Condition: used, mileage: 20,000 km, power: 100 kW (135.96 HP), first registration: 05/1992, fuel type: diesel, empty load weight: 4,790 kg, overall weight: 7,490 kg, tire size: 8,5 R 17,5, axle configuration: 4x2, wheelbase: 3,800 mm, brakes: constant throttle, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 9, total length: 6,750 mm, total width: 2,380 mm, total height: 2,800 mm, loading space length: 2,900 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Equipment: additional headlights, cabin, differential lock, fog lights, trailer coupling, Vehicle location: Bovenden, steel superstructure, Doka, double bench seat, sun visor, switch 5, constant throttle, power take-off, tachograph, differential lock, fog lights, work lights, rotating beacon, leaf suspension, trailer coupling ball head Wheelbase: 3800 mm Body: Ziegler box body with roller shutters, built-in pump FP 8/8 and 600l fire water tank double cab, Ziegler box body with roller shutters, fire water tank 600L, built-in pump FP 8/8 (approx. 78 operating hours), trailer hitch, differential lock rear axle, brake hydraulic 2-circuit / compressed air 2-circuit, load-dependent brake, stabilizer rear axle reinforced, parabolic springs front and rear reinforced level II, flame start system, top speed 102 Km/h The sale to tradesmen or export is subject to 19% VAT! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kjdpfxovhhyve Ahhodr - .

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Kdedjq Nf U Ejpfx Ahhsr Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: used, mileage: 1,21,459 km, power: 100 kW (135.96 HP), first registration: 09/2021, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 4, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 195 Mercedes-Benz Vito 114 CDI MIXTO KOMPAKT. Single owner. Fully dealer-maintained exclusively at Mercedes-Benz (last service scheduled for 08/2025 at 116,646 km). Paint Code: * 9147 Paint color Arctic White MB 9147 Interior: * VF4 Caluma fabric, black Equipment: * 9147 Paint color Arctic White MB 9147 * BB7 CO2-optimized braking system * C447 - * C70 Pedestrian protection * CF9 Basic chassis Plus * CL4 Multifunction steering wheel with trip computer * E07 Hill-start assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for starting process * E3C Audio 30 * ED4 Fleece battery 12V 92 Ah * EL8 Two-way speakers, front * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F447 - * F61 Interior mirror * F66 Lockable glove compartment * F68 Heated and electrically adjustable exterior mirrors * FF1 Center console with storage compartment * FKB Combi variant * FR1 Non-retractable rear view camera * FR8 Reversing camera * GC9 6-speed manual transmission Fsg 350 * H00 Warm/cool air duct to passenger area * H20 All-around heat-insulating glass * HH9 Semi-automatic climate control Tempmatic * HI1 Climate zone 1 (cold/comfort) * IB6 Model series C447 Vito/V-Class * IG5 Basic Kdsdpfxox Rtaxs Ahher * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IN1 Wheelbase 3200 mm, short overhang * J55 Seat belt warning device for front passenger seat * JA1 Warning lamp for windshield washer fluid level * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel matrix display * JW8 Attention Assist * JX2 Service interval 40,000 km * KB5 Main fuel tank 70 liters * KP6 SCR emission control generation 3 * L Left-hand drive * LA2 Light assistant * LD9 Rear compartment interior lighting * LE1 Adaptive brake light * LX2 3-month market rule * LX5 Europe * M44 Alternator 14 V/185 A * MG9 Generator management * MJ8 ECO start/stop function * MK8 Speed limitation 210 km/h * MS1 Cruise control * MT2 Emission class Euro 6D-TEMP N1 * MX0 BlueEFFICIENCY Package * MX8 Engine OM622 DE 17 LA 100 kW (136 HP) * Q22 Fixed-ball trailer coupling * R21 Wheel size group 1 * RF1 Tire brand Continental (10) * RG6 Tires 195/65 R16 * RM7 Summer tires * RS3 Steel wheels 6.5J x 16 * S00 Airbag control unit generation AB12 * S04 Adjustable passenger seat * SA6 Passenger airbag * SB1 Driver comfort seat * T14 Active retainer sliding door * T70 Child safety locks in passenger compartment doors * U60 Passenger compartment seating: 2-seater bench, 1st row * V30 Paneling of side wall in cargo/passenger compartment * V43 Wooden floor * VD2 Standard roof lining * VF4 Caluma fabric, black * VV9 Fixing points in roof frame * W16 Fixed window front left in side wall/sliding door * W17 Fixed window front right in side wall/sliding door * W65 Tailgate * W70 Tinted windows in rear compartment, privacy glass * WA0 Factory control code * WL9 Factory control code * WM0 Model update control code * WN7 Factory control code * X30 Registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XC9 COC documents * XG6 Weight variant 2,800 kg * XI1 Change year G1-I * XM0 Model update * XM8 Ste...

Condition: used, Year of construction: 2021, 1 unit of METALLKRAFT HSBM 2020-20 SB press brake Color: as shown in the pictures, according to the images and inspection Year of manufacture: 2021 Machine number: 3772920 Dimensions L/W/H: 260 x 60 x 145 cm Ksdpfxszvc Hvj Ahhodr Condition: used Payment method: prepayment by bank transfer Shipping: Self-collection only – No shipping is offered for this item!