Used Busch R5 Ra0400 B for sale (40,351)

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ndjdpfx Ajzz Tm Rokmoc Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine Njdjz S Egiepfx Akmjdc NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Year of construction: 2016, condition: as good as new (ex-display), Rotary vane vacuum pump Oil-lubricated Nodpfxsc Sy Tts Akmedc Manufacturer: Busch Type: RA 0063F Includes: Oil filling Condition: Demonstration unit Warranty: 12 months Delivery time: In stock

Condition: used, Year of construction: 2003, The Manroland Roland 504-L is a high-performance four-color sheetfed offset press, manufactured in 2003 and currently operational in a printshop in Germany. With a 520 x 740 mm format and 170 million impressions, this press is built for demanding, high-volume production environments. The Roland 504-L is equipped with coating units for added versatility, and features semi-automatic plate change (PPL) for quick job turnarounds. Automatic format adjustment and non-stop devices for feeder and delivery ensure seamless operation and minimal downtime. The press also includes automatic washing devices for ink rollers, blankets, and impression cylinders, simplifying maintenance and improving productivity. Advanced features such as inking unit temperature control (Tempcontrol NT3), a powder device (Hitronic-S Grafix), and a dampening solution cooling unit (Technotrans) guarantee consistent print quality and optimal operating conditions. The integrated Grafix IR dryer further enhances drying efficiency, making this press a comprehensive solution for high-quality, high-speed printing. Format: 530 x 740 mm Min. Size: 260 x 400 mm Max. Size: 530 x 740 mm Min. Paper Thickness: 0.04 mm to 1.0 mm Max. Paper Thickness: 0.04 mm to 1.0 mm Speed: 16,000 sheets per hour Net Weight: 24000 kg Ndedpfxexnbiao Akmec Equipment: 4 Colors Offset press with Coater RCI with CCI Color Pilot Press Pilot Roland Matic Delta Dampening with Technotrans Impression Cylinders, Blankets and Rollers Washers PPL Auto. Plate Loading Inking unit temperature control (Tempcontrol NT3) Powder device (Hitronic-S Grafix) Coating Unit with Extended Delivery Air Glide Grafix IR dryer

Condition: used, input voltage: 380 V, Heavy-duty metal frame Motorized, liftable head Nedpfxe Aaq H As Akmjdc Large metal whisk with thick wires Removable bowl Bowl capacity: 500L Integrated control panel Push-button controls Digital display Large circular metal housing Voltage: 380V Used industrial mixer with liftable head This used industrial mixer is designed for mixing and whipping operations in bakeries, pastry shops, and food production laboratories. Its large design features a metal frame, a motorized liftable head, and a large-volume metal whisk. This configuration allows for working with different preparations using a tool suitable for whipping and aeration operations. Why this model stands out This professional mixer is characterized by its liftable upper head, which facilitates access to the mixing tool and frees up the space needed to position a suitable bowl. Its large metal whisk is a particularly useful piece of equipment for preparations requiring a whipping action. The robust frame and integrated control panel demonstrate a design intended for a professional production environment. The visible push buttons and digital display indicate a control interface that is directly accessible to the operator. Unlike a dough mixer specializing in dough processing, this type of mixer is primarily intended for mixing, whipping, and aeration operations. However, the exact working possibilities depend on the motor and the compatible tools. Key advantages Industrial design suitable for food production environments Liftable head for easy access to the tool and bowl placement Large metal whisk visible on the equipment Configuration designed to accommodate a suitable removable bowl Heavy-duty metal frame providing a stable working structure Control panel with push buttons and digital display Possibility of complementing existing equipment with a compatible bowl Used solution for professionals looking for an old industrial mixer

Condition: refurbished (used), Busch vacuum pump, two-stage, water-cooled. Completely overhauled, available from stock. Ndodpowv Rgasfx Akmjc

Year of construction: 2008, condition: excellent (used), Screw pump Nedpfxod Rafbe Akmedc Manufacturer: Busch Type: Cobra DS 600 E Condition: very good Delivery time: available from stock

Condition: new, Year of construction: 2025, functionality: fully functional, Busch COBRA Industry NX 0450 A LH1 SQDA screw vacuum pump Nominal suction capacity at 50 Hz: 350.0 m³/h Nsdpfszkq Tyjx Akmjdc Ultimate pressure: 0.5 mbar

Year of construction: 2013, condition: used, Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction capacity: 140 m³/h Final pressure: approx. 60 mbar (absolute) Accessories: Intake filter; Operating manual Ndjdpjcfw Ukefx Akmjc Delivery time: short notice

Condition: used, B&R Provit Controller 5C5001- removed from Ferromatik MV 200-970 3F - removed from running machine Nodpfx Aew Ah Nrjkmedc - fully functionalmanufacturer: B&R manufacturer no.: 5C5001.11 spare part no.: 10131261If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer.

Condition: good (used), Rotary vane vacuum pump Status: General overhaul; Like new Warranty: 12 months Delivery time: In stock Manufacturer: Busch Type: R5 RA 255D Motor: 400V Operating fluid: Mineral oil Nominal suction capacity: 250 m³/h Ndodpfx Akecipmuemoc Ultimate pressure: 0.5 mbar (absolute) Accessories: Operating manual; Oil fill (mineral oil); Vacuum suction filter Delivery time: In stock (subject to prior sale) If you have any questions about vacuum technology, we are happy to assist you.

Condition: good (used), Busch SE 90 Paper Pallet Turner The unit is in full working order and ready for operation. This pallet turner is manufactured by the German company Busch. It is a current production model. Technical specifications: Format: 900 x 620 mm Nodpjz S Up Tefx Akmsdc Stack height: max. 1220 mm, min. 420 mm Load capacity: 500 kg Machine weight: 750 kg Power supply: 380 V Operated via a control panel; fast performance; hydraulic drive. Quiet operation. Compact design; requires minimal floor space.

Condition: good (used), Ram Punch Busch model A Label die cutter Nsdpfxsz S Uvmo Akmjdc Professional machine, German-made. In very good condition. Busch is a market leader in the production of pallet turners and punching machines. 100% functional, ready for production. Technical specifications: Opening: 300 mm Max. format: 180 x 180 mm Cycle rate: 15/min Stroke length: 200 mm Capacity: 900,000 sheets/h Weight: 600 kg Equipped with a high-speed hydraulic power unit. Features clamps for mounting dies, with axial die adjustment. Feed table adjustable in all planes. Two operating modes: semi-automatic and manual. Includes a delivery tray (stacking tray).

Condition: used, Year of construction: 1995, max. weight 60 kg; Nedez R Dlhjpfx Akmsdc min. weight 0,4 kg.

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 5AC800.EXT1-00 keyboard + 5AC800.EXT3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ndsdpfx Akox Equ Nsmoc

Condition: excellent (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, working width: 550 mm, overall weight: 235 kg, tank capacity: 50 l, total height: 1,082 mm, total width: 663 mm, total length: 1,284 mm, water tank capacity: 50 l, The battery-powered scrubber-dryer B 50 W Bp Pack R55, manufactured in 2026, is ideally suited for efficient floor cleaning in public buildings and retail environments. Its compact design provides excellent visibility and allows for agile operation, even in hard-to-reach areas. The aluminum die-cast brush head and suction bar make this walk-behind machine extremely robust and durable. The R55 brush head ensures clean and powerful cleaning, particularly on structured surfaces. Ndodpfx Akoz Ag Nzsmjc The roller brush deck is especially well-suited for coarse dirt particles (such as wood splinters). The roller brushes “sweep” the coarse dirt particles into a separate container for coarse dirt, which is positioned directly behind the roller brushes. This prevents particles from sticking to the suction foot and affecting the suction result. The wheel drive makes operation easier and reduces the physical strain on the user. Fresh water can be easily refilled through the universal filling hose at any water tap. Furthermore, the “Machine connect” app allows for easy control of extended settings and information via smartphone. Technical data: Drive system: Drive motor Working width, brushes: 550 mm Working width, suction: 850 mm Fresh/dirty water tank: 50/50 liters Theoretical area performance: max. 3,600 m²/h Practical area performance: 2,160 m²/h Permissible total weight: 235 kg

Condition: good (used), Year of construction: 2014, Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1 Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,500 kg Dimensions according to documentation: approx. 3,741 x 1,718 mm and height approx. 2,800 mm (including operating light, which can be unscrewed). For carton dimensions: 600 x 400 x 400 mm (can be changed with a different tool). 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg Ndsdpfezbyn Njx Akmec A video of the machine is available!

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° Ndsdou Id Dbjpfx Akmsc electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Resonator power: 5 kW Working area (L × W): 4,000 × 2,000 mm Sheet metal thickness, steel: max. 25 mm Sheet metal thickness, stainless steel: max. 20 mm Sheet metal thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal edge detection 17-inch touch color display Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine Ndjdpfx Akez Npdgomoc FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine enclosure with certified viewing window, door on the right Electric roll-up roof Retrofitting capability for max. 2 additional LLK outlets

Condition: used, mileage: 1,35,000 km, power: 287 kW (390.21 HP), first registration: 10/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: orange, gearing type: automatic, loading space length: 5,400 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2014, Equipment: ABS, crane, had accident, RENAULT C 380 TIPPER 5,40 m + CRANE Imported / Damaged ? YEAR OF PRODUCTION: 2014 ? MILAGE: 135 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL MIRRORS ? POWER STEERING ? ENGINE BRAKE ? TACHOGRAPH TIPPER: 540 x 248 x 60 cm (L x W x H) CAPACITY: 13 000 kg Njdpfx Akerdufysmodc TOTAL WEIGHT: 26 000 kg WHEELBASE: 430/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: AIR CRANE: PALFINGER PK 16001 K - B TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Manufacturer: Busch Nodpfebrantjx Akmsdc Type: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: General overhaul If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, fuel type: diesel, color: yellow, Year of construction: 1999, machine/vehicle number: 1012, Product Description Used mobile crusher Manufactured by KOMATSU Model BR500JG-1 SERIAL : 1012 YEAR : 1999 Max Crushing Capacity : 120-460ton/hrs Max feed size of Trash : 1200x850x600 mm Please contact IVAN HOW JPN Industrial Trading Pte Ltd Ndodpjumtg Uofx Akmsc 13A Pandan crescent, Singapore 128478

Condition: refurbished (used), functionality: fully functional, Technical specifications: Product number: WV 1500 B 001 Year of manufacture: 2004 Capacity: 1500 m3/h Maximum vacuum: 0.09 mbar The booster pump must operate in conjunction with an oil pump with a capacity 2 to 3 times lower. The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Nodpfx Akezvrgremedc Achieves a vacuum of 0.09 mbar.

Condition: used, Year of construction: 1998, Format: 600 x 750 mm Njdpfoy D Tc Tsx Akmsdc Equipment: Max. stacking height 1200 mm Min. stack height 540 mm Platform width 900 mm Platform depth 625 mm Load capacity 500 KG

Year of construction: 2021, condition: new, Standard features New Busch pump Njdpfx Asg Hm Sqjkmedc Specifications