Used Cold Room for sale (2,120)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing Csdpfx Asy Hkd Hsa Nsrb - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2003, Max. saw blade diameter: up to 300 mm Machine head tiltable: 45°-90°-45°-30° Cutting diameter at 90°: 100 mm Square tube: 85 x 85 mm Codpfjy E Ullox Aa Norb Flat profiles, hollow: 130 x 85 mm Speed range: 40 / 80 rpm Drive power: 1.0 / 1.2 kW Machine dimensions (L x W x H): 650 x 600 x 1650 mm Weight: 185 kg Accessories / Special Features: • Vertical guidance of the saw head • Continuously adjustable mitre facility 45°-90°-45°-30° • Infeed/outfeed roller conveyors, each approx. 1 m in length • Manual feed • Coolant system • 1 saw blade included • CE compliant This very good VMS 300 is from a training workshop. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, We would be happy to advise you! Here we offer from our own inventory: 10x Filter Fan Unit (FFU) controllers together with digital control units. New price: €1,000 each. We also offer a cleanroom setup according to your requirements. See pictures for an example. The room elements are each 2.05 meters x 3.2 meters. The pictures are of a room we built for a Dutch customer. Crodsrlm Rvopfx Aa Njb New cleanrooms have a guide price of €500 per square meter of floor space with a height of 2,500 mm and glazing. Example: 4x4 meters 4x4 = 16 * €500 = €8,000

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Very well-maintained Behringer VMS 370 A, including infeed and outfeed roller conveyors. The machine is now in stock, refurbished, and available for immediate delivery. Crsdpfx Aey Edcyoa Neb

Year of construction: 2008, condition: ready for operation (used), A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible. Csdpfxey Nm Umo Aa Nsrb

Condition: used, Year of construction: 2007, saw blade diameter: 350 mm, Blade tilt -45° / +45°. Maximum vise opening 180 mm. Maximum length 385 mm. Blade diameter 350 mm. Blade rotation speed 1700 / 3400 rpm – 2 speeds. The machine comes from a factory closure. After switching on, all axes function, the machine calibrates, and the blade operates at two speeds. I am not familiar with its programming, therefore the automatic cutting function has not been tested. The set includes several additional blades for different materials. Cedpfoywvrqox Aa Nerb The machine is located in Poland – 33350. Inspection possible by prior arrangement. Our company is located 120 km from Kraków Airport (KRK). Transport possible. Export price.

Condition: good (used), Year of construction: 1974, Offer 26003 Technical Data: - Saw blade diameter: up to 370 mm - Cutting capacity at 90°: - round: 110 mm - square: 100 mm - rectangular: 280 x 40 mm or 240 x 85 mm - Cutting capacity at 45°: - round: 110 mm - square: 100 mm - rectangular: 220 x 40 mm - Mitre adjustment left and right: each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 380 V / 1.2 / 1.8 kW - Saw blade feed rate hydraulically, steplessly adjustable - Coolant system Crjdpey Nlnxefx Aa Nob - Required space approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

Condition: used, functionality: fully functional, very robust gearbox, motor 1.0 / 1.8 kW Credpsy Iv Hijfx Aa Nob Saw blades: 360 mm Slow-running model with 6 cutting speeds: 8 / 10 / 12.5 m/min 16 / 20 / 25 m/min Test cutting at our facility with the following specifications: Cutting capacity at 90 degrees with blade size 360 mm: Round profile: 110 mm Solid round material: 80 mm Flat profile: 200 x 80 mm Weight approx. 560 kg

Condition: not inspected (used), functionality: unexamined, total width: 1,200 mm, total length: 3,000 mm, total height: 1,500 mm, overall weight: 2,000 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Overall length: 3,000 mm Overall width: 1,200 mm Overall height: 1,500 mm Codpoy D Tl Uofx Aa Norb Machine weight: 2,000 kg External reference: 41

Year of construction: 1970, condition: not inspected (used), functionality: unexamined, overall weight: 2,000 kg, total length: 3,000 mm, total width: 1,200 mm, total height: 1,500 mm, machine/vehicle number: 779, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Credjy D Tkdspfx Aa Nsb Diameter: 5.4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,200 x 1,500 mm Machine weight: 2,000 kg External reference: 40

Condition: not inspected (used), Year of construction: 1958, functionality: unexamined, machine/vehicle number: 202, wheel diameter: 885 mm, production capacity: 4,200 unit/h, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Maximum bolt diameter: 7.7 mm Maximum thread: M8 Maximum shank length: 90 mm Minimum shank length: 20 mm Output: approx. 35/53/70 pcs/min Flywheel diameter: 885 mm Cedpfx Aoy D Tfhsa Norb MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 1,500 mm Machine weight: 2,500 kg External reference: 42

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 75385, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 80 mm, spindle speed (max.): 2,500 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect within the period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Spindle speed: 50 - 2,500 rpm Feed rate X/Y/Z-axis: 5 - 1,000 mm/min Rapid traverse X/Z-axis: 4 m/min Rapid traverse Y-axis: 2 m/min Tool holder: ISO 40 Quill stroke of horizontal and vertical working spindle: 80 mm Table dimensions: 730 x 410 mm Number of T-slots: 8 MACHINE DETAILS Control: HEIDENHAIN TNC 135 Operating voltage: 380 V Frequency: 50 Hz Connection rating: 10 kW Rated current: 50 A Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,100 x 2,200 mm Crodpfx Aoy D Swija Nsb Machine weight: 2,000 kg EQUIPMENT Workshop drawer cabinet with SK 40 holders Clamping devices External reference: 13

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1616, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 450 m/min, spindle speed (max.): 2,500 rpm, No reserve price - guaranteed sale to the highest bidder! Placing a bid commits you to collect the item within the scheduled period between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Spindle speed range: 40 to 2,500 rpm Table dimensions: 600 x 210 mm Number of feeds: 16 Feed rates: 28 to 450 mm/min Number of slots: 4 Tool holder: SK 40 MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,000 x 1,200 x 1,700 mm Machine weight: 1,000 kg Codpfx Aey D Shnea Norb EQUIPMENT Mounted vice (jaw width: 110 mm) Set of tool holders Milling cutters Collets Three-axis digital readout (manufacturer: FAGOR) External reference: 10

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Crsdpfx Asy I Rakea Nob Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this as-new Heidinger I-1751 refrigeration cell, year of manufacture 2023. Type: I-1751 Year: 2023 Double refrigeration cell 2-8°C (unused) Each unit features a Viessmann double door (2m x 2.7m) Redundantly designed Internal dimensions per cell approx. 16m (L) x 5.15m (W) x 4.85m (H) Walls made of 100mm sandwich panels No dedicated floor, thus accessible by forklift Cjdpeykrtpefx Aa Njrb Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigeration cell was set up for the storage of pharmaceuticals and has never been commissioned after manufacturer inspection. The pallet racking shown is not included in the offer. If you have any questions or need further information, please feel free to send us a message or give us a call.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Hettich CombiDancer Infrared Vortex-Evaporator with PoleStar Cold-Trap System (2005) For sale is a complete Hettich CombiDancer high-speed evaporation system (Hettich AG, Switzerland) — a premium parallel evaporator for rapid, gentle, and reproducible solvent evaporation, from light volatile ethers to high-boiling solvents such as DMF and DMSO. Decommissioned from a chemistry laboratory in fully functional condition with no known faults. Formally decontaminated (written certificate included). Never used in a biological or isotope environment. Highlights • Complete, ready-to-run system: CombiDancer + PoleStar cold-trap + diaphragm pump + rotary vane pump • 3–10× faster than conventional rotary evaporators; no sample balancing, no rotating parts in the chamber Crodpfx Aoy Nmi Rea Njb • Accepts large tubes, HPLC vials, Falcon tubes (15/50 ml), Eppendorf tubes, scintillation vials, microtiter/deep-well plates • Three independent heating zones (halogen IR, compartment heater, heated shaker plate) • PoleStar freezes solvents to –45 °C; rotary vane pump reaches 0.01 mbar for high-boiling solvents • Original paper manuals (CombiDancer & PoleStar) included CombiDancer Specs • Vacuum chamber: V4A stainless steel, Ø 360 × 180 mm • Vortex: 200–1,000 rpm • Temp: 20–80 °C • Vacuum: DN25 • Gas fittings: 2× 6 mm Swagelok • RS232 (VP, CT, PC) • 230 VAC / 1,800 VA • 765/930 × 695 × 470 mm / 78 kg PoleStar Cold-Trap Specs • Capacity: 3.3 L • Cooling: –45 °C • Vacuum: 0.01 mbar • Vessel: aluminium FEP-coated • Coil: V4A stainless steel • 230 VAC / 660 VA • 520 × 430 × 530 mm / ~45 kg Pumps Included • Vacuubrand PC2003 VARIO + CVC 2000 controller (oil-free diaphragm, auto vapor sensing) • Vacuubrand RZ 6 (rotary vane, deep vacuum) Scope of Delivery • CombiDancer unit • PoleStar cold-trap • both vacuum pumps • mobile cart • original manuals • decontamination certificate Typical Applications • Analytical chemistry / SPE • combinatorial chemistry / HTS • pharma R&D • natural product & botanical extract workflows • food, cosmetics & life sciences

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Crodpfx Aajy Iycbo Njb Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Condition: refurbished (used), Year of construction: 1980, For sale is a Kaltenbach cold circular saw The machine has been technically and optically refurbished Gearbox naturally free of play! Type: KKS 400 H Crjdpsy Iybdjfx Aa Nsb Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 313026, saw blade diameter: 450 mm, total length: 10,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 2,000 kg, KALTENBACH SKL 450 H Semi-automatic Cold Circular Saw Cjdpfey Dcr Dox Aa Norb - Operating voltage: 3 x 400 V - Frequency: 50 Hz - incl. roller conveyors Attention: The item must be collected on a binding date between 07 and 09 July 2026, to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119349, saw blade diameter: 450 mm, total length: 12,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 1,500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) - Saw blade diameter: 400/450 mm - Saw blade mounting: 50/4 x 14/80 - Working range, round material 90°: 135/160 mm - Square 90°: 125/145 mm Codoy Dcrwopfx Aa Norb - Profiles 90°: 300 x 40 mm / 320 x 50 mm - Profiles horizontal 45°: 220 x 60 mm / 250 x 40 mm - Profiles vertical 45°: 60 x 130 mm / 100 x 150 mm - Saw motor: 3.7 / 4.7 kW - Cutting speed: 1950 / 3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring system L45E, one starter section: 2000 mm, horizontal clamping system SKL 450 Note: The machine has been completely overhauled! Note: The item must be definitively collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt - loaded onto truck

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H cold circular saw automatic (completely overhauled) - Max. cutting width: 4 mm - Saw blade arbor bore: 50 mm - Number of mounting bolts: 4 pcs - Bolt circle diameter: 80 mm - Saw blade feed rate: 0 - 3000 mm/min Crsdpfxsy Dcqye Aa Nob - Rapid return: 4500 mm/min - Adjustable travel of workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - Stepless manual rotary table adjustment: 90° This is a completely overhauled machine. Specification: Dosing system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with L45D length measuring device Note: This item must be collected on a binding date between July 7th and July 9th, 2026 (exact date to be coordinated). FCA D-71263 Weil der Stadt - loaded onto truck

Condition: used, Year of construction: 2013, functionality: limited functionality, saw blade diameter: 370 mm, cutting height (max.): 100 mm, feed length X-axis: 1,000 mm, total length: 2,450 mm, total height: 1,900 mm, total width: 1,750 mm, overall weight: 1,060 kg, cutting diameter: 100 mm, cutting length (max.): 99,999 mm, working height: 1,000 mm, The machine can be tilted to 45°. Further technical details are provided in the user and maintenance manual, which is included with the sale. If you have any further questions, please feel free to contact us by phone or email. Kind regards, Weber Geländersysteme. Cjdpfx Aasx Di S Us Nerb

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm turning speeds: 5 - 5000 U/min quill stroke: 90 mm total power requirement: 9 kW feed range: 0-10.000 mm/min weight of the machine ca.: 3260 kg dimensions of the machine ca.: 2200x2800x2000 mm spindle: 6 kW Accerories vertical milling head SK 40 CNC universal milling machine (without toolchanger), Equipped with CNC-Heidenhain TNC 407 Crjdpey A Rmgsfx Aa Njb dwheel coolant device *

Condition: excellent (used), saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm mitter cutting - all-position +90°/-90° ° cutting speed 10/20 m/min voltage 400 V feed speeds infinitely variable 0 - 1000 mm/min Cjdpfxoy Aytvj Aa Njrb total power requirement 3,4 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1,10 x 0,9 x 1,50 m

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Crodpfeyfnpijx Aa Neb Electrical specifications: 400 V Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: • 1st gear: 11 m/min • 2nd gear: 22 m/min