Used Compactsystem Martina 55 for sale (6,185)

Condition: defective spare-parts repository (used), Year of construction: 1993, operating hours: 40,042 h, functionality: limited functionality, machine/vehicle number: 1009, turning diameter over cross slide: 345 mm, turning length: 1,000 mm, turning diameter: 550 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 285 mm, travel distance Z-axis: 1,070 mm, spindle motor power: 34 W, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 3,150 rpm, total height: 2,180 mm, total length: 5,755 mm, total width: 2,350 mm, type of input current: AC, overall weight: 7,500 kg, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Manufacturer: TRAUB Type: TND 550 Year of manufacture: 1993 Operating hours: approx. 40,000 hours Condition: defective / not operational For sale is a TRAUB TND 550, manufactured in 1993. The machine was in use at our facility until recently. Currently, the control system does not start, meaning the machine is not operational at this time. We have not investigated the cause of this issue further. Therefore, no statement can be made as to whether the cause lies in the control system itself, the power supply, or another machine component. Itsdpfxozd Udio Agpek The following defects were already known prior to the current failure: Gear shifting not functioning. The machine was permanently in gear 2, with a speed range up to approximately 3,200 rpm. Driven tools not functioning. Tailstock operation is performed via an added toggle switch. The turret moves or shifts only in slow motion. The ball screw of the X-axis causes running noises. The running noises of the ball screw of the X-axis have been present since we purchased the machine in 2021. Despite these running noises, the machine was able to reliably produce H7 fits until the current failure. The causes of the aforementioned defects, as well as the current failure, have not been fully investigated. The machine is therefore explicitly sold as defective, non-operational, and in need of repair, and is suitable, for example, for repair, as a source of spare parts, or for reconstruction. Inspection is possible by appointment. Sale in the existing "as is" condition. All information is provided to the best of our knowledge, but without warranty. Sale with exclusion of any warranty for the mentioned and possible further, currently unknown, defects.

Condition: used, Year of construction: 1975, functionality: fully functional, power: 33.1 kW (45.00 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 60 t, stroke length: 140 mm, throat depth: 280 mm, We are offering this used Osterholt EXPA 60 eccentric press, manufactured in 1975, for sale. Machine number: 873368 Type: EXPA 60 Itedpfx Aozlgz Njgpjk Pressing capacity: 60,000 kg Stroke length: 280 mm Minimum ram height: 100 mm Adjustable ram: 60 mm Adjustable stroke: 10–140 mm Motor power: 45 hp Mains voltage: 380 V If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: P260302015, total height: 350 mm, total width: 300 mm, total length: 800 mm, overall weight: 80 kg, machine base height: 180 mm, STOCK STATUS: 3 UNITS For sale is a professional, multi-section process module manufactured to hygienic standards, designed for the food, brewing, or chemical industry. Main components of the set: • Pumps: Series of centrifugal pumps in stainless steel housings (protection against flooding/hygienic standard). • Flow measurement: Integrated electromagnetic flowmeters (visible control units with LCD displays, e.g., from Endress+Hauser or a similar class). • Construction: The entire unit is mounted on a stable stainless steel frame (skid type), which facilitates transport and installation in a new production line. • Piping: Complete acid-resistant piping with flanged and hygienic connections. Key advantages: • Precision: Thanks to the flowmeters, the system allows for very accurate liquid dosing or media transfer monitoring. • Hygiene: Stainless steel construction allows operation in CIP (Cleaning In Place) systems. • Ready for operation: Complete module ready to be integrated into an existing technological installation. Technical condition: Very good, regularly serviced, operating in a clean production environment. A pump without an electromagnetic flowmeter can also be purchased for 15,000 PLN. Itodpezrmvasfx Agpek This description may have been translated automatically. For further information, please contact us. The information contained in this advertisement is for informational purposes only. We suggest verifying the details with the seller before making a purchase.

Condition: excellent (used), Year of construction: 2014, operating hours: 11,065 h, functionality: fully functional, machine/vehicle number: 03001212-03.14, The ALPHA LASER ALM 200 laser welding machine was manufactured in Germany by Alpha Laser GmbH in 2014, but it has been in operation since 2017. This mobile laser welding machine is equipped with a 200 W laser source (9kW laser beam power), enabling the repair and modification of various components such as dies, molds, injection molds, tools, and machine parts in any selected location. Welding is performed in a semi-automatic mode. The mobile laser welding system features a narrow laser head, allowing access to the interior of the welded component. It is controlled via a computer, joystick, and foot switch. The machine is in very good technical and visual condition and has been regularly serviced. The machine comes with a table. Price: 170,000 PLN net (VAT invoice provided). Technical parameters of the ALPHA LASER ALM 200 laser welding machine: – Power: 200 W – Wavelength: 1064 nm – Travel speed (X, Y, Z): 0-25 mm/s – Travel range (X, Y, Z): 140 x 120 x 1300 mm – Pulse energy: 90 J – Pulse duration: 0.5-20 ms – Pulse frequency: 100 Hz – Laser beam power: 9 kW – Laser beam diameter: 0.2-2.0 mm – Operating mode: Pulsed – Focal length: 150 mm – Power consumption: 380 V/ 50-60 Hz / 16 A/8kW – External dimensions: W-1410 x D-730 x H-1585 mm – Machine weight: approx. 320 kg – Operating hours: 11065 – Serial number: 03001212-03.14 Iedpfx Astqtrfegpotk Additional parameters and equipment of the ALPHA LASER ALM 200 laser: – Optics: LEICA microscope mount, 10x magnification, optionally 16x – Display with keyboard – Multifunctional foot switch – Joystick – Adjustable laser arm – Complete workstation with table – Option to purchase spare parts for the machine and accessories at a good price, e.g., lamps, hoses, wire guide holders, spheres/bases for parts, magnets, etc. – Option to purchase various types of welding wires at good prices – Option to purchase a fume extraction system

Condition: ready for operation (used), Year of construction: 2009, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China. Itsdpfx Agoxf Ii Uepok

Condition: ready for operation (used), Year of construction: 2011, A modified MECO internal keyway slotting machine is available. Keyway width range: 4mm-45mm, max. square keyway diameter: 36mm, max. hexagonal keyway diameter: 36mm. The machine was modified and can now slot square and hexagonal keyways. Documentation available. An on-site inspection is possible. Iodpoy Hvqrsfx Agpetk

Condition: good (used), functionality: fully functional, battery capacity: 700 Ah, remaining battery capacity: 55 %, battery voltage: 48 V, total length: 1,225 mm, total width: 425 mm, total height: 785 mm, overall weight: 1,118 kg, fuel type: electric, Forklift battery 48V 5PzS700, battery tested, 55% remaining capacity Year of manufacture: unknown Dimensions (l x w x h): 1220mm x 425mm x 785mm Weight: 1118kg Battery was serviced and tested by a specialist company. Capacity test (C5 discharge test): 390/700 Ah battery Remaining capacity: 55% Equipped with an Aquamatik filling system (BFS) Itsdpfxozl Dn Te Agpjk Includes terminal bolts, but WITHOUT end connections.

Condition: ready for operation (used), Year of construction: 2007, power: 55 kW (74.78 HP), Fully functional single-shaft wood shredder - currently in operation in our factory. Including electrical control system (PLC), switch cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Technical data Rotor working length: 1,500 mm Rotor diameter: 485 mm Iodpsra Ex Esfx Agpstk Motor: 55 KW Rotor speed: 100 RPM Rotor knives: 76 pieces concave / 35x35 mm 4-fold rotating cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg Further details on request. Errors and omissions excepted.

Condition: used, functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: electric, Equipment: electrical contact length stop, emergency stop, foot remote control, Rebar bending machine Peddinghaus Spezial 55. Completely overhauled machine with tooling. Iedpfx Aoydfwuogpotk

Year of construction: 2008, condition: ready for operation (used), Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible. Itsdpfox S Rbpsx Agpsk

Condition: used, Year of construction: 1974, machine/vehicle number: 4139, functionality: fully functional, pressing force: 80 t, stroke length: 140 mm, table width: 530 mm, table length: 750 mm, ram plate width: 335 mm, ram plate length: 440 mm, Equipment: documentation/manual, For sale is a robust eccentric press from Beutler Maschinenbau with approximately 80 tons of pressing force. The machine is ideally suited for punching and forming operations. Specifications: • Table area: approx. 750 x 530 mm • Ram area: approx. 440 x 335 mm • Ram adjustment: approx. 150 mm • Stroke: adjustable from 20 – 140 mm • Max. installation height: approx. 320 mm • Table opening: approx. Ø 230 mm Itodpfozb Eaqox Agpsk Sold without warranty, ex works. The machine will be delivered without electrical power and compressed air connection. Payment before collection.

Condition: used, first registration: 06/2016, empty load weight: 1 kg, maximum load weight: 17,999 kg, overall weight: 18,000 kg, tire size: 385/55 22,5, tire condition: 70 %, axle configuration: 2 axles, color: silver, driver cabin: day cab, emission class: none, suspension: air, Year of construction: 2016, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, Equipment: ABS, truck registration, Vehicle number for inquiries: 41707 Fliegl, ZWP * Year of manufacture: 2016 * ABS, Anti-lock Braking System * EBS, electronic brake system * Air suspension * Air connection, coupling head (red + yellow) * 15-pin connector * Lifting and lowering mechanism * Galvanized * Suspension: Air * Total weight: 18,000 kg * Tare weight: 1 kg * Payload: 17,999 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 60% - Tire size: 385/55 R22.5 * Tire condition 2nd axle: 70% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Trailer has seen little use * Rotating beacon at the rear * Lifting range: 1080 mm to 1430 mm * Highlight * Galvanized / Standard / 1 previous owner Disclaimer: Subject to changes, prior sale, and errors excepted. More photos and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents Isdpfx Agezvlmfepotk * Ordering of export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration services * Transportation of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Drive: Itodpezc Nfyefx Agpok Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, machine/vehicle number: UC 2109/29604202, power: 55 kW (74.78 HP), rotational speed (max.): 1,500 rpm, input voltage: 415 V, input frequency: 50 Hz, input current: 93 A, type of input current: three-phase, type of cooling: air, protection type (IP code): IP55, Siemens drive motors 55 kW Itsdpfx Aox Hizdjgpek Speed controllable via frequency inverter As-new motors, never used

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). Ijdpfx Agsyw Rzaspstk A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of tilt adjustment Hinged hood with aluminium guides Adjustable table top opening via table slide System for quick tool change with long tables and extendable workpiece support Table size 2500 x 780 mm Spindle adjustment – 45° to +45° Spindle diameter 30 mm Spindle stroke 230 mm Max. table opening: 300 mm 5.5 kW motor with automatic star-delta start with clockwise and anti-clockwise rotation Speeds: 3000/4500/6000/8000/10000 rpm Electronic programming of spindle height, spindle tilt and stop position (milling stop) Extraction at top and bottom: 120 mm Dimensions 2570 x 1450 mm Weight approx. 670 kg Availability: at short notice Storage location: Röllbach Isdpfx Agjzk Nq Rspjtk

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Itedpfx Aov Rmmmogpek

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394B03266, Year of construction: 2011, operating hours: 8,433 h, load capacity: 4,500 kg, lifting height: 4,100 mm, free lift: 2,111 mm, fuel type: gas, mast type: duplex, construction height: 2,875 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,100 mm Free lift: 2,111 mm Load capacity: 4,500 kg ISO class: 3 Isdpfx Aozu Nfcjgpotk MACHINE DETAILS Mast type: Duplex Drive type: Internal combustion engine Rated power: 55 kW Overall height: 2,875 mm Unladen weight: 6,620 kg EQUIPMENT 3rd valve 4th valve

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, operating pressure: 160 bar, total length: 1,310 mm, high-pressure hose length: 50,000 mm, total height: 1,030 mm, total width: 1,020 mm, type of input current: DC, empty load weight: 320 kg, input voltage: 12 V, fuel: regular/benzine 91, overall weight: 320 kg, water tank capacity: 500 l, power: 17.7 kW (24.07 HP), volume flow: 3.3 m³/h, pressure (max.): 160 bar, We are offering this like-new Dirojet Whale Built-In Plus 55/160 high-pressure cleaner, manufactured in 2024. Dimensions (L × W × H): 1310 × 1020 × 1030 mm Gross weight: 320.000 kg Net weight: 320.000 kg Serial number: 23-260 Year of manufacture: 2024 Water flow rate: 55 l/min Maximum operating pressure: 160 bar Engine power: 17.7 kW Engine power: 24 HP Engine type: Gasoline engine (Honda GX690) Voltage of the high-pressure hose reel: 12 V DC High-pressure hose length: 50 m High-pressure hose diameter: 1/2" Fill hose length: 35 m Fill hose diameter: 3/4" Water tank volume: 500 l Country of manufacture: Italy If you have any questions or require further information, please do not hesitate to send us a message or call us. Ijdpfezg Adiex Agpjtk

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,662 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 620 mm Travel range, Y-axis: 520 mm Travel range, Z-axis: 460 mm C-axis: 360° B-axis: -50° / +110° Rotary table diameter: 500 mm Spindle speed (max.): 12,000 rpm Itedjzr Nmbepfx Agpek Spindle type: SK40 Number of spindles: 1 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Operating hours (see image) Control system operating hours: 38,569 h Machine operating hours: 37,263 h Spindle operating hours: 15,662 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Scraper-type chip conveyor Workpiece measuring probe Coolant system Compressed air via M-command Heidenhain handwheel Kinematic optimization cycle Note: The machine is sold without tools, vise, and clamping plate.

Condition: used, Year of construction: 1990, machine/vehicle number: 90-10-175, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, saw blade diameter: 450 mm, height adjustment type: mechanical, actuation type: manual, Equipment: saw blade guard, Altendorf table saw, model F-90, as shown in the photo. Year of manufacture: 1990. The saw is being sold because it has been replaced by a new one. It is still in perfect working order. It will be transported on a wooden pallet and can be loaded onto a truck using a forklift on site. Sold as is, no warranty. Isdjzq Srqopfx Agpotk

Condition: used, Year of construction: 2018, saw blade diameter 550 mm Under-table saw for aluminum and PVC Iodpfx Agszvhm Uspetk Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 200 h, machine/vehicle number: 31015, control type: PLC-controlled, degree of automation: manual, actuation type: manual, controller manufacturer: 4JET, laser type: fiber laser, laser hours: 200 h, laser power: 200 W, laser wavelength: 1,064 nm, power: 200 kW (271.92 HP), type of cooling: water, compressed air connection: 5 bar, overall weight: 350 kg, total length: 1,310 mm, total width: 525 mm, total height: 1,454 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, We offer a non-contact, mobile laser cleaning system, model 4JET M200, which was used solely for demonstration and testing purposes. We also offer a wide range of accessories, including: fiber extension cables (3m to 10m), 5 pieces; laser safety goggles; and a mobile laser protection curtain with frame. Itodpozlrzzsfx Agpok

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center Iodpfx Agjzdkhqspjtk The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: used, machine/vehicle number: PST37, Used pasteurizer for tomato juice 400 CPMTechnical Specifications & Performance DataThis BOND four-module tunnel pasteurizer-cooler is designed for the thermal treatment and controlled cooling of tomato juice containers. Built primarily in stainless steel, the machine combines pasteurization and cooling stages on a continuous Intralox plastic mesh conveyor, providing a robust solution for industrial packaging and beverage production applications requiring extended thermal processing.Maximum production speed: For tomato juice 400 containers per minute (24.000 unit per hour) for beer 600 container per minut (36.000 unit per hour).Alternative operating condition: 300 containers per minute ( overhauled, in excellent condition )Thermal length: 27,400 mmUsable width: 3,200 mmUseful processing area: 80 m²Total internal capacity: 22,000 piecesProduct weight used for the thermal calculation: 450 gContainer format indicated: 2.0LAdvanced Automation & Control SystemsThe pasteurizer is supplied with an electrical control panel for management of the thermal treatment and conveyor process. Water tanks, recirculation pumps, heat-exchange equipment and the continuous conveyor are integrated into a coordinated operating system. The design includes recirculating-water circuits serving the pasteurization and cooling sections.Thermal performance data indicate pasteurization water at 95°C, with a cooling-tower temperature difference of 10°C. The documented recirculating-water volume is 80 m³/h, with additional pump references of 65 m³/h and 165 m³/h.Production Line Integration CapabilitiesThis tunnel pasteurizer is suitable for installation in a used bottling line or industrial packaging line where filled containers require pasteurization before downstream handling, labeling or secondary packaging. Its continuous mesh conveyor configuration supports inline product flow between upstream filling equipment and downstream cooling, inspection or packaging machinery.The machine was originally engineered for tomato juice, a product requiring longer pasteurization times and higher pasteurization temperatures than beer. The system can therefore be evaluated for beverage production and food-processing applications with comparable thermal-treatment requirements. The cooling section includes a 20 m² buffer conveyor to support controlled product discharge and line balancing.Machine Condition & Maintenance HistoryPresented as like new and fully operational, the machine is complete with the accessories required for operation. The all-stainless-steel construction supports durability and hygiene in demanding production environments, while the Intralox mesh belt provides continuous container transport through the thermal and cooling zones.Operational Performance & VersatilityAt 400 containers per minute, the maximum documented thermal cycle lasts 55 minutes. Pasteurization represents 25% of the cycle, with 14 minutes at 95°C water temperature, followed by 41 minutes of cooling using cooling-tower water. At 300 containers per minute, a revised 60-minute cycle is indic... Itodpfxjzvl S Io Agpek