Used Cormak Hinge Drilling Machine for sale (65,861)

Condition: excellent (used), functionality: fully functional, Masterwood K29S multi-spindle drilling machine Number of spindles: 29 Speed: 2800 rpm Kdsdsy Atycspfx Apdon Distance between first and last drill bit: 896 mm Number of pneumatic clamps: 4 Distance between spindle centres: 32 mm Max drilling depth: 80 mm Operating pressure: 6 – 7 bar Motor power: 3kW Technical documentation

Condition: excellent (used), Comec FMC 900 3M + CA Pneumatic Drill Automatic loading from magazine Number of spindles: 3 Maximum workpiece length: 900 mm Maximum workpiece width: 100 mm Maximum drilling distance: 800 mm Drilling capacity depending on material length: 500–1100 pcs/h Ksdpfx Apeyb R T Njdodn Designed for high-volume production of chairs, beds, cribs, and also for components of other furniture items

Condition: excellent (used), functionality: fully functional, 4-speed gearbox Kjdpeyxcu Isfx Apdodn speeds from 180 to 2000 rpm motor power 0.75 kW drilling depth stop up/down adjustment vice available at extra cost

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Kdsdpfex A Tk Sex Apdjn Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 28 Total number of tool changer positions: 31

Condition: excellent (used), Year of construction: 2003, operating hours: 3,800 h, functionality: fully functional, Good morning, I am selling a complete set ready for drilling operations: - Vermeer D7x11a horizontal drill, 2003, ~3800 operating hours. It underwent a major overhaul a few years ago, has almost a full magazine of Hunting drill rods, and is in very good technical and visual condition. - Vermeer mixing unit with a 120 l/min bentonite pump, 2003. Tank capacity: 1200 l. - Iveco Eurocargo 100E18 E5 truck, 2012, ~290,000 km. Equipped with an additional tank (1100 l), shelving, a water transfer pump, a water filling system, a Cintropur filter, tool holders, and a custom-made external aluminum toolbox. Aluminum ramps are also included. The vehicle has undergone a full service at an authorized Iveco workshop. Oils, filters, front and rear brakes, new headlights and windshield, and new batteries have all been replaced. The vehicle is in excellent condition. Kdedpfx Apezd Ribedsn - An additional D7x11a drill for parts - the machine is practically complete, missing only a few elements and parts. The engine is in working order. I will include a starting drill rod, a drilling head, a locking sleeve, and 3 reamers (90-230 mm) with the drill. The set is currently used only occasionally, but it is ready for operation at any time.

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 50 mm arm length 1.600 mm workpiece height max. 1.200 mm distance spindle/base plate 320 - 1.220 mm spindle taper MT 5 quill stroke 315 mm throat min. 350 mm throat max. 1.600 mm quill feed 0,04 - 3,20 mm/U drive capacity - spindle motor 4,0 kW spindle turning speed range 25 - 2.000 U/min Kdodpfjzcqyfox Apdjn column diameter 350 mm voltage 400 V total power requirement 6,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump

Condition: used, machine/vehicle number: 008601, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 6 No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes Ksdpfx Aezbrnhepdedn

Condition: used, The COMEC MM05/3L is a multi-spindle oscillating drilling machine equipped with seven spindles, designed for automatic drilling of holes in materials of specific dimensions. The machine features an automatic feeder that streamlines the machining process by automatically feeding and clamping the material. The MM05/3L's technical specifications include: - 7 oscillating spindles, Kodpfexrpcisx Apdjdn - adjustable oscillation, - pneumatic material clamps, - production capacity of several hundred pieces per hour. The machine features a robust construction, flexible work settings, and CE certification, ensuring safety and compliance with European standards. It is suitable for production applications requiring precise multi-point drilling on a variety of materials, typically found in the furniture and woodworking industries. The automatic material feeder, working in conjunction with the multi-spindle drilling unit, increases the efficiency and repeatability of production processes, minimizing operator involvement and improving work ergonomics.

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units - 2 vertical units Kjdpfexrmptox Apdjdn - 4 front-mounted units (two on each side)

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Operating instructions Bit Kodpeyamc Defx Apdedn This item is an unused display unit.

Condition: new, Year of construction: 2024, New machine Kedpjw Rhk Rjfx Apdsdn Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, Display unit Kdodpfx Apjv Ntb Ijdjn Condition: Like new Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Kdodpfx Aex A Hbkepdsn Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake Kedpfszabakox Apdsdn - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change)

Condition: not inspected (used), Year of construction: 1996, bore capacity in steel (diameter) 32 mm morse taper MK 4 base plate 1700 x 700 mm feed 4 m/min Kodjzb Raispfx Apdjdn weight of the machine ca. 1,5 t dimensions of the machine ca. 1800 x x1200 x 2480 m

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Brema EKO 2.2 is the new compact and versatile vertical drilling machine that supports the processing of different thickness and size formats within a reduced footprint. It is the ideal solution for “just in time” production also for more complex routing processing. Maximum machine customization depending on production requirements Maximum manufacturing efficiency thanks to the elimination of set-up times Wide range of processable panels Brema EKO 2.2 – CNC panel machining centre X working field: 3200 mm Y working field: 1250 mm Workable panels (dimensions min. - max.) Dimension MIN (mm) MAX (mm) Length (X) 200 3200 Height (Y) 35 1250 Thickness (Z) 8 60 Max. workable panel weight: 50 kg (*) Panel Height (Y) / Length (X) ratio ≤ 0.75 for panel up to L = 320 mm (°°) Panel Height (Y) / Length (X) ratio ≤ 1.5 for panel L > 320 mm On minimum panels managed with only one gripper clamping, all types of processing can be realized — except those in the gripper interference zone. In case of processing at gripper height, piece tilting may be necessary. All operations must be verified case by case depending on: panel dimensions (especially minimum values), material type, covering, and machining requirements. Working field of the tools (dimensions min. - max., referring to tool axis) Ksdpfx Apswnx Ivsdsdn X Axis Operation MIN (mm) MAX (mm) Boring 0 3200 Routing (with electro spindle) 0 3200 (^) Grooving (with saw blade in X) 0 3200 (^) Y Axis Operation MIN (mm) MAX (mm) Boring 0 1250 Routing (with electro spindle) 0 1250 Rf Grooving (with saw blade in X) 25 1250 Z Axis Operation MIN (mm) MAX (mm) Horizontal holes 0 35° Ru (^) With grippers automatic repositioning (°) Max. dimension may be reduced depending on the panel size and gripper positioning

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Ksdezcnnaopfx Apdedn Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller Kdjdpfxjx E Ings Apdon

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 50 mm, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 1,400 rpm, rotational speed (min.): 31 rpm, total width: 800 mm, total length: 1,100 mm, total height: 2,400 mm, throat depth: 335 mm, table width: 480 mm, table length: 560 mm, overall weight: 1,270 kg, Equipment: CE marking, documentation/manual, # Column Drilling Machine MTP Z5150B – New ## Description The MTP Z5150B column drilling machine is a professional industrial machine designed for drilling, reaming, countersinking and tapping operations in steel, cast iron, aluminum, brass, bronze and other metals. Its heavy-duty cast iron construction and machine weight of 1270 kg ensure excellent rigidity, stability and machining accuracy, even when working with large-diameter tools. The machine is equipped with a mechanical gearbox offering 12 spindle speeds and automatic spindle feeds, allowing the operator to select the optimal cutting parameters for various materials and tooling applications. The tapping function and integrated coolant system further enhance productivity and versatility. With a spindle speed range from 31.5 to 1400 rpm, the MTP Z5150B is suitable for both heavy-duty drilling operations and precision machining tasks. The large T-slot worktable provides secure and convenient workpiece clamping, while the robust column design minimizes vibration during operation. The machine is CE compliant and supplied with technical documentation and an operating manual. ## Standard Equipment * Mechanical gearbox * Automatic spindle feeds * Tapping function * Integrated coolant system * Adjustable worktable * Safety guard * Emergency stop switch * Technical documentation * CE Declaration of Conformity ## Technical Specifications * Model: MTP Z5150B * Machine type: Column drilling machine * Maximum drilling capacity: 50 mm * Spindle taper: MT5 * Quill travel: 250 mm * Motor power: 3 kW * Power supply: 400 V * Frequency: 50 Hz * Electrical phase: 3-phase * Spindle speed range: 31.5 – 1400 rpm * Number of spindle speeds: 12 * Automatic feed range: 0.056 – 1.80 mm/rev * Throat depth: 335 mm * Table size: 560 × 480 mm * Machine weight: 1270 kg * CE Marking: Yes * Documentation available: Yes * Condition: New * Year of manufacture: 2025 ## Suitable Materials The machine is designed for machining: * Structural steel Ksdpfxszcn A Ds Apdedn * Tool steel * Cast iron * Aluminum * Brass * Bronze * Engineering plastics Recommended cutting speeds displayed on the machine help operators quickly select appropriate drilling and tapping parameters for different materials, ensuring efficient machining and extended tool life. ## Additional Information The MTP Z5150B is an excellent choice for metalworking workshops, maintenance departments, tool rooms, fabrication shops and industrial production facilities. Its powerful 3 kW motor, wide spindle speed range and tapping capability make it a versatile solution for daily machining operations. The machine is available from stock and ready for immediate dispatch. Transportation can be arranged throughout Europe upon request.

Condition: ready for operation (used), Year of construction: 1994, quill travel distance: 170 mm, throat depth: 900 mm, power: 3 kW (4.08 HP), High-speed radial drilling machine Manufacturer: HKS, Type: HKS 34 MG Year of manufacture: 1994 Technical data Manufacturer: HKS Type: 34MG Year of manufacture: 1994 Drill spindle mount: MK 4 Overhang: max. 900 mm Drilling capacity: 32/38 mm, see data sheet Drill spindle stroke: 170 mm Distance spindle – table: 300 / 750 mm Motor power: 3 kW Clamping area with T-slots: 1050 x 420 mm External dimensions W x D x H: 1400 x 2000 x 2450/2900 Weight approx.: approx. 2000 kg Kdsdpozbr Ibjfx Apdjn Equipment - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Swivel table 510 x 310 mm All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, RADIAL CSEPEL TYPE: RF50/1600 TYPE: RF50/1250 20 AVAILABLE PIECES Ksdpfx Apsriu Eyodjdn

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Kedpfxoyyxkhe Apdedn

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Kdsdpfx Apszfwh Hedjn Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Ksdpfxjpr Uvrj Apdodn

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Kjdpfx Aey Ih Skepdsdn Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria