Used Dörries Scharmann Heavycut 1.2 Tdv4 for sale (1,093)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Nlodpfxjzqunhe Ahnjf Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New compressed air dryer KAESER TBH 14 with electronically controlled condensate drain Year of construction: 2024 Technical data: Flow rate: 1.20 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to + 50°C max. Compressed air inlet temperature: + 60° C Compressed air connection: G 1/2" Dimension (W x D x H): 462 x 525 x 548 mm Weight: 33 kg electrical supply: 230 V / 1 / 50 Hz Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space. Nedpotqm S Refx Ahnslf

Condition: new, Year of construction: 2024, 7.5 kW electric motor V-type log feeding system Set of additional rollers Set of pneumatic side discs Cutting dimensions Max. log diameter: 400 mm Min. log diameter: 100 mm Max. log length: 3.6 m Min. log length: 1.2 m Max. cutting width: 250 mm Min. cutting width: 7 cm Headstock equipment Automatic cutting width adjustment device (Setworks) Headstock adjustment: electric Blade cleaning system: LubeMizer Blade tensioning system: hydraulic Heavy-duty log clamping rollers Spiked rollers Blade Length: 4670 mm Width: 32 mm, 35 mm, 38 mm Thickness: 1.07 mm, 1.14 mm, 1.27 mm, 1.40 mm Blade guide wheels Diameter: 600 mm Type: with belt Nedpfx Ahjztnaisnolf Feeding system Speed: 0-20 m/min

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2MAZL000283, power of the servo motor: 350 W, input voltage: 230 V, clearance between the columns: 70 mm, type of input current: AC, throat depth: 120 mm, feed length X-axis: 22 mm, feed length Y-axis: 78 mm, feed length Z-axis: 10 mm, pneumatic connection: 6 bar, JUKI MOL-254 – Automatic Belt Loop Attaching Machine High-Speed Denim Production Unit – Video Verified (03/2026) Description For sale is a JUKI MOL-254 automatic belt loop attaching machine, designed for fully automated production of belt loops in jeans, trousers and workwear. This is a specialized high-speed production unit, not a standard sewing machine. The machine automatically feeds, cuts, positions and bartacks belt loops with consistent precision and strength. The unit has been used in a professional garment production environment and is offered as a complete industrial workstation. Video recorded in operation on 05.03.2026 Serviced on 27.02.2026 Production-ready condition Production performance Cycle time approx. 1.2 seconds per loop Up to 2,000–2,500 belt loops per shift Simultaneous top and bottom bartacking Consistent symmetry and reinforcement quality Key features Fully automatic belt loop feeding, cutting and attaching Integrated bartack stitching system Pneumatic material handling system Digital JUKI control panel Adjustable loop size settings Stable performance on heavy fabrics such as denim and workwear Designed for continuous industrial use Includes JUKI MOL-254 machine unit Integrated motor and drive system Pneumatic system Industrial table and stand Operator control panel Thread stand Technical details Manufacturer: JUKI, Japan Model: MOL-254 Type: Automatic belt loop attaching machine Control: Electronic JUKI control system Drive: Industrial motor with pneumatic system Application: Belt loop production Condition Nsdpfx Aey Nd Hgshnolf Used industrial production condition Fully functional Serviced 27.02.2026 Video proof available Typical signs of use from factory environment Sold as-is, where-is, without warranty Applications Jeans manufacturing Workwear production Trousers production Automated garment production lines Location Valga, Estonia Logistics Buyer responsible for dismantling and transport

Condition: ready for operation (used), Radial Drill, Used Equipment Nedew Db Nuspfx Ahnolf Brand: CSEPEL Model: R.F. 2a Description: Column Diameter: 350 mm Vertical Travel of the Arm: 1200 mm Horizontal Travel of the Drill Head: 1000 mm Vertical Travel of the Spindle: 400 mm Spindle Diameter: 65 mm 12 Spindle Speeds: 47.5 – 2100 RPM 8 Feed Rates: 0.048 – 1.2 m/min Motor Power: 9 HP

Condition: excellent (used), Year of construction: 2023, BINDER VD 56 Vacuum Drying Oven with VD-M 53 Pump Module Manufacturer: BINDER GmbH Type: VD 56 Year of Manufacture: 2023 Machine Type: Vacuum Drying Oven Internal Volume: 55 liters Maximum Temperature: 220 °C Offered is a BINDER VD 56 vacuum drying oven from 2023, including a matching BINDER VD-M 53 pump module and a BINDER VAP 1 vacuum pump. The system is designed for gentle drying of materials under vacuum conditions and is particularly suitable for laboratory, research, development, quality control, and industrial process applications. Technical Data: Manufacturer: BINDER GmbH Model: VD 56 Article Number: 9630-0002 Version: VD056-230V Year of Manufacture: 2023 Internal Volume: 55 l Temperature Range: +9 °C above ambient temperature to +220 °C Heating Time to 100 °C: approx. 80 min Spatial Temperature Deviation at 100 °C: ± 1.2 K Temporal Temperature Deviation at 100 °C: ± 0.1 K Leak Rate: 0.01 bar/h Vacuum Connection: DN 16 Measurement Port: DN 16 Rated Voltage: 200–230 V Mains Frequency: 50/60 Hz Rated Power: 1.4 kW Protection Class: IP20 Made in Germany Pump Module: Manufacturer: BINDER GmbH Type: VD-M 53 Article Number: 8012-1943 Year of Manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current Consumption: 8.0 A Phase: 1N~ Protection Class: IP20 Vacuum Pump: Manufacturer: BINDER GmbH Type: VAP 1 Article Number: 5013-0217 Year of Manufacture: 05/2023 Pumping Capacity: 2.0 / 2.2 m³/h Ultimate Pressure: < 7 mbar Voltage: 230 V Frequency: 50/60 Hz Current Consumption: 1.6 / 1.5 A Protection Class: IP40 Dimensions: VD 56 without attachments and connections: Width: approx. 638 mm Depth: approx. 461 mm Height: approx. 815 mm Internal Dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net Device Weight VD 56: approx. 96 kg Maximum Load per Shelf: 20 kg Maximum Total Load: 60 kg Equipment: Digital controller with pressure and temperature display Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measurement port DN 16 Safety glass pane with splinter protection Large viewing window Insert shelf BINDER VD-M 53 pump module BINDER VAP 1 vacuum pump Vacuum and connection hoses Connecting and mounting parts Operating and assembly instructions Further accessories as shown in the pictures Shipping Data: Weight VD 56: approx. 96 kg Due to size and weight, shipping by freight forwarder is required. Condition: Used Year of Manufacture 2023 Optical condition as shown in the pictures Nsdpfx Aszt R D Rehnjlf Nameplates are present Scope of Delivery: 1 × BINDER VD 56 Vacuum Drying Oven 1 × BINDER VD-M 53 Pump Module / Pump Cabinet 1 × BINDER VAP 1 Vacuum Pump Vacuum and connection hoses Connecting and mounting parts Connection cables Operating and assembly instructions Accessories as shown in the pictures The unit is available for short-term delivery. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Nsdpfx Aozt Ni Eohnjlf Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, functionality: fully functional, machine/vehicle number: NRX20151106, turning diameter: 150 mm, spindle motor power: 7,500 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, type of input current: three-phase, total height: 2,200 mm, total length: 5,000 mm, total width: 3,000 mm, spindle nose: JIS A2-5, overall weight: 5,600 kg, CNC - Double Spindle Turning and Milling Center DMG MORI - NRX 2000 MC Double Front Spindle Simultaneous Parallel Machining Tool Drive Portal Loading Tool-Piece Carriage 14 pos. (Ø 40 - max. 150mm) approx. 300h Spindle-hours. Technical details / additionals / accessories number of spindles 2 swing diameter max. 348 mm turning diameter max. 150 mm standard turning dia. 120 mm turning length max. 80 mm distance between spindles 670 mm control COMPACTline M73 Workspindle: number of spindles 2 max. spindle speed max. 5,000 min/-1 power capacity 7.5 / 5.5 kW spindle nose JIS A2-5 chucking diameter 200 mm C-Axis 0.001 ° turret: Number of Turret 2 number of tool positions 10 pos. Shank height for square tool 20 mm Drill shank diameter 32 mm Nedpfx Ahezuauzenslf turret change time 0.31 sec. Driven Tool Stations: driven station 10 pos. Spindle speed - driven tool stations max. 10,000 min -1 power capacity - driven tool-stations 1.5 / 1.2 kW movement areas: x-axis 1+2: 100 mm z-axis 1+2: 220 mm C - Axis 1+2: 360° feeds: rapid traverse ( X / Y / Z ) 30 m/min feed speeds max. 30,000 mm/min Tip feed 0 - 5,000 mm/min total power requirement 32 kVA weight of the machine approx. 5.6 t dimensions of the machine approx. 5.0 x 3.0 x 2.2 m Chip conveyor Coolant system electric hand wheel gantry loader Workpiece-storage Tool drive mechanism

Condition: excellent (used), Year of construction: 2015, operating hours: 1,300 h, functionality: fully functional, machine/vehicle number: NRX20151106, Machinetype: Chucking Automatic Lathe - Multi Spindle Make: DMG MORI Type: NRX 2000 MC New in: 2015 Control: CNC Location: North Rhine-Westphalia Origin: Japan Term of delivery: to be agreed Quotation: ex site Description: CNC - Double Spindle Turning and Milling Center DMG MORI - NRX 2000 MC Double Front Spindle Simultaneous Parallel Machining Tool Drive Portal Loading Tool-Piece Carriage 14 pos. (Ø 40 - max. 150mm) approx. 1,500h Spindle-hours. Technical details/ additionals / accessories Text Dimension Unit number of spindles 2 swing diameter max. 348 mm turning diameter max. 150 mm standard turning dia. 120 mm turning length max. 80 mm distance between spindles 670 mm control COMPACTline M73 Workspindle: number of spindles 2 max. spindle speed max. 5,000 min/-1 power capacity 7.5 / 5.5 kW spindle nose JIS A2-5 spindle bearing diameter - mm spindle bore - mm max. bar capacity - mm usable bar diameter - mm chucking diameter 200 mm C-Axis 0.001 ° Nsdswnyi Iopfx Ahnslf turret: Number of Turret 2 number of tool positions 10 pos. Shank height for square tool 20 mm Drill shank diameter 32 mm turret change time 0.31 sec. Driven Tool Stations: driven station 10 pos. Spindle speed - driven tool stations max. 10,000 min -1 power capacity - driven tool-stations 1.5 / 1.2 kW movement areas: x-axis 1+2: 100 mm z-axis 1+2: 220 mm C - Axis 1+2: 360° feeds: rapid traverse ( X / Y / Z ) 30 m/min feed speeds max. 30,000 mm/min Tip feed 0 - 5,000 mm/min total power requirement 32 kVA weight of the machine approx. 5.6 t dimensions of the machine approx. 5.0 x 3.0 x 2.2 m Chip conveyor Coolant system electric hand wheel gantry loader Workpiece-storage Tool drive mechanism

Condition: used, Ampere Rack Armour® shelf support protector, size M. Condition: used, good condition Manufacturer: Ampere System Product: Rack Armour® Size: M Suitable shelf support width: 88–100 mm Height: 600 mm Outer shell material: HDPE (high-density polyethylene), wall thickness > 7 mm Inner material: Highly flexible energy-absorbing foam Weight: approx. 1.2 kg Color: signal yellow Impact absorption: frontal impact up to 2.4 t Assembly: can be done without tools (assembly aid recommended), no floor fastening required Availability: we have several in stock, please inquire about the desired quantity! Accessories such as: Floor fastening Connectors Load warning signs Impact protection Guardrails Grating Back wall grating Depth stops Barrier railings and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide you with competent and personal advice as your experienced specialist dealer for new and used shelving systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net, ex warehouse. Express delivery via our own fleet is possible after individual consultation. Nledpfx Ajzux Exshnjf - Offer Status: All offers are subject to change. Items are subject to prior sale. - Reservation of Ownership: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for material defects is excluded. For new goods, the respective manufacturer's guarantees apply.

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Njdpfxszuyqio Ahnjlf Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: new, Year of construction: 2026, functionality: fully functional, STREET VACUUM CLEANER “ CITY ANT AQUA “ Equipment for cleaning urban areas, streets, sidewalks, parks, stadiums, railway stations, airports, parking lots, industrial areas from different waste. Street vacuum cleaner City Ant works on electrical accumulators which provide 9-hour autonomous work. It can be charged in the nighttime from the 220V. Easy-to-push vacuum cleaner can be used by one hand, noiseless. Changing the trash bag takes only 2-3 minutes. No air pollution. It can take all the waste: wood, steel, plastic, paper, carton pieces, textile waste, leaves, cigarette butt, cans and bottles (glass, plastic and metal) etc. City Ant fits different areas: concrete, asphalt, pavement, lawn, sand, etc. Technical specifications: - Electric motor - 48V / 1200W - 48V / 1200W electric drive - enabling forward and reverse travel - Waste collector type - hopper; - Vacuum power 1.2 Kw; - Maximum speed 6 km/h; - Hopper capacity 240l; - Vacuum hose Ø 125 mm; - Vacuum hose length 2,5 m; - Autonomous work time 8 h; - Charging time 10-12 h; - Wheels Ø 320mm; - Doble nebulizers; - Dust filter with an area of 16 m²; - Hill climb up to 25% - Possibility of overcoming curbs by 15 cm. - Sprayer: 2 - external and internal. - Warning lamp Price- 11500, 00 Euro + aqua function 1000 Euro netto The CITY BEETLE is a professional electric street cleaning trolley designed for the efficient and effortless collection and sorting of litter gathered from pedestrian streets, pavements, alleys, parks and the surrounding areas of various sites. It ensures many hours of uninterrupted work without physical strain, even during long shifts. Features • The trolley holds up to 20 litres of liquid and is equipped with special mounts for securing cleaning equipment. • It easily passes through turnstiles at bus and train stations. • The battery can be charged anywhere using a standard 230 V socket. • Special mounts allow tools to be easily attached to the trolley. Key benefits of the CITY BEETLE street cleaning trolley: Mobility: speed of up to 6 km/h for quick cleaning of large areas Environmental friendliness: safe for people and the environment Versatility: collects and sorts waste, washes away dirt with water Cost-effectiveness: low energy consumption and minimal maintenance Safe operation: electromagnetic brakes, optimal tyre pressure, IP54 protection Technical specifications: • Dimensions: 2300 × 1500 × 1200 mm • Weight: 410 kg (empty) • Main waste container: 1 × 240 l • Additional waste containers: 2 × 120 l • Water tanks: 2 × 10 l • Spray angle adjustment: Available • Motor power: 1.2 kW • Battery runtime: Up to 8 hours without recharging • Charging time: 10–12 hours • Wet cleaning function • Noise level: 65 dB • Wheel size: Ø320/Ø400 mm, with electromagnetic brakes for safe operation • Tilt angle: up to 10° • Protection class: IP54 (dust- and water-resistant) • Pump capacity: 3.6 l/min Nsdpfxjvriluj Ahnjlf • Maximum pressure: 0.6 MPa

Condition: new, functionality: fully functional, After the highly successful introduction of the V-Line height gauges, Trimos has developed a new instrument in its height gauge range: the V8. The mechanical design and scope of delivery of the V8 are identical to those of the V9. It features the same characteristics that have made the V9 model so successful: extreme precision and repeatability, high resolution, and Swiss Made finish. A particular highlight of this new model is the specialized fine adjustment handle. Trimos developed this fine adjustment in response to specific applications requiring precise adjustment of the carriage position. Like its predecessors, the V8 guarantees extremely simple operation with outstanding robustness, flexibility, and high precision. The large two-line "Black Mask" display of the V8 offers exceptional contrast in all lighting conditions. The display features functions that are directly accessible and represented by easy-to-understand symbols. Measuring ranges from 400 to 1100 mm Specialized fine adjustment handle Manual displacement Exceptional level of precision Wide selection of accessories All adjustments possible without tools RS232 and USB interfaces Wireless data transmission (optional) V8 Models: V8 – 400 Measuring range (mm): 406 Measuring range with extension (mm): 724 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Deviation of front squareness (µm): 5 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 22 V8 Models: V8 – 700 Measuring range (mm): 710 Measuring range with extension (mm): 1028 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Deviation of front squareness (µm): 8 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 12 Nlodpfsw R Nvhox Ahnjf Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 25 V8 Models: V8 – 1100 Measuring range (mm): 1109 Measuring range with extension (mm): 1427 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Deviation of front squareness (µm): 11 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 34

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, color: red, overall weight: 7,500 kg, operation weight: 5,500 kg, maximum load weight: 2,000 kg, Year of construction: 2025, The 825T model is the ideal machine for the most demanding construction, electrical, hydraulic, renovation companies, and service providers in related industries. It is built on a robust frame and can be operated under any conditions. The comfortable, glazed cabin ensures safe and pleasant operation. The machine boasts an impressive lifting height of 4.8 meters! PERFORMANCE: Rated load capacity: 2,000 kg Total weight: 5,500 kg Nodpfx Ajxcv Hiohnelf Rated bucket capacity: 1.2 m³ Maximum traction force: ≥34 kN Maximum breakout force: ≥51 kN Maximum climbing ability: 30° Maximum dumping height: 4,006 mm Maximum dumping reach: 854 mm Overall dimensions (L×W×H): 6,200 × 2,100 × 2,580 mm Minimum turning radius: 4,043 mm ENGINE: Standard model: YUNEI DEF20CAF4 Type: Vertical, inline engine, water-cooled, 4-stroke diesel Number of cylinders – Bore/Stroke: 4 — 100 × 125 mm Rated power: 55 kW Max. torque: 250 N·m Minimum specific fuel consumption: ≤243 g/kW·h DRIVELINE: Torque converter: YJ1—26501 Transmission: Intermediate shaft, power-shift type Gear range: 2 forward, 2 reverse Maximum speed: 20 km/h Drive axles: Main reduction – spiral bevel, single-stage Reduction type: Planetary, single-stage Wheelbase: 2,551 mm Track width: 1,650 mm Ground clearance: 310 mm HYDRAULIC SYSTEM: Operating pressure: 16 MPa Arm lift time: 4.8 s ± 0.2 s Full cycle: 9.2 s ± 0.5 s Fuel tank volume: 80 L Automatic leveling function: Yes BRAKE SYSTEM: Service brake: Disc brakes on all four wheels Parking brake: Hand brake TYRES: Type and size: 16/70-20 Front tire pressure: 0.22 MPa Rear tire pressure: 0.22 MPa PRICE: €30,500 net €36,295 gross WARRANTY: - Each machine carries a 12-month warranty, which can be extended by an additional two years. - After the warranty period, we ensure our customers have access to all spare parts. SERVICE: - We have our own mobile service team that reaches all our customers throughout Germany and abroad. KINGWAY is Europe's largest and leading importer of construction and agricultural machinery. For 25 years, we have been active in the European market, importing and selling between 3,000 and 4,000 machines annually, earning the trust of numerous customers. KINGWAY DEUTSCHLAND is the only stationary distributor of the Kingway brand in Germany. Only here can you visit and test all of our machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main Kingway branch in Germany. We have a vast selection of machines in stock, with about 100 units available at any time. We deliver throughout Germany, Austria, Switzerland, Italy and other neighboring countries. We also offer full access to parts and mobile services for our customers. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm Njdpfx Asd Ha Irohnolf strip thickness: 0,5 - 3 mm blade shaft Ø: 180 mm

Condition: used, mileage: 1,500 km, power: 110 kW (149.56 HP), first registration: 11/2025, fuel type: diesel, color: orange, gearing type: mechanical, Equipment: ABS, air conditioning, all wheel drive, soot filter, Your MULTICAR – authorized dealer with expertise, service, and advice – offers you the following: Nlsdpfx Aezvtfiohnef MULTICAR M31 C Weight reduction to 3,500 kg gross vehicle weight possible! Net price: €109,900.00 Equipment: - 3.0-liter Iveco turbo diesel engine, low-emission according to Euro VI OBD-E, 110 kW / 150 hp - short wheelbase (2,450 mm) - 4x4 drive including crawler gear - fully synchronized 5-speed manual transmission (90 km/h) - 10 forward gears and 2 reverse gears - newly developed tilting comfort cab - mobile hydraulics with 2 control circuits / 1 working circuit - 2nd pivoting function at the front - 3-pin socket at the front - mounting kit for equipment panel 1 - quick-change front mounting bracket SWV 500 - three-way tipper 2,060 x 1,495 x 400 mm with angled steel front wall extension - light bar on the cab roof with dimmable LED auxiliary headlights - telescopic LED warning beacon - red/white warning markings, 1 set = 4 pieces - tires 285 / 65 R16 C M+S - AIR CONDITIONING - electrically heated and adjustable exterior mirrors - electric windows - CD radio with MP3 function, FM, RDS, mute, Bluetooth - driver's suspension seat - interior mirror - ball hitch – trailer coupling (3.5 t trailer load) Manufacturer's warranty until 11/2027 Snowplow and fertilizer spreader available as optional extras for a net additional price of €15,110.00: Snowplow SIMED Type PMS 170 (New unit with 12 months manufacturer's warranty) Overall width 2.00 m, clearing width in angled position approx. 1.70 m, blade height 0.60 m lightweight design, hydraulically pivoting, quick-change mounting, overload protection by spring deflection, rubber scraper strip, warning markings, warning flags Fertilizer spreader SIMED Type SVS 1.2 E (New unit with 12 months manufacturer's warranty) Filling volume 1,200 liters equipped with a conveyor screw and a rotary spreader Spreader and discharge chute made of stainless steel including folding roof, protective grid, and spreader lighting adjustable spreading rate and spreading width via a control panel in the cab Spreading width adjustable from 1-6 m, spreading stop when the vehicle stops 4 support legs Errors, changes, and prior sale reserved. Our general terms and conditions apply. Benefit from our many years of experience in sales + service and have us create your individual offer. Also, take advantage of our leasing and financing options. We promise you competent advice and support from our qualified staff. You can find more offers from the commercial vehicle manufacturers MULTICAR and ISUZU, as well as a comprehensive range of attachments, at: Tel.:

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Nledpfxjzwvtxe Ahnjf Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: used, For inquiries about the attachment, Mr. Herden is happy to assist you (on Tel. ...). DMS RL70120 Rotator Bucket / incl. Rotator / MS03 Mount / NEW item / in stock & immediately available Price: €6,990.00 net / €8,318.10 gross - Weight: 217 kg - Cutting width: 1,200 mm - Volume: 220 l - Max. output speed: 9 – 10 rpm - Max. torque: 6,960 Nm - Recommended oil flow (rotation): 35 – 45 l/min - Max. operating pressure (rotation): 210 bar - Excavator class: 4 – 7 tons Optional: - MS03 Mount: €560.00 net - MS08 Mount: €890.00 net We have a very large selection of various DMS products in stock and immediately available! Mr. Herden (Tel. ...) is at your service. Upon request, we are happy to provide you with a financing offer. We are an official distributor and service partner for DMS. We are an official distributor and service partner for Westtech. We are an official distributor and service partner for Gierking GMT. We are an official distributor and service partner for OilQuick. We are an official distributor and service partner for Weber MT. We are an official distributor and service partner for Holp. We are an official distributor and service partner for Seppi M. We are an official distributor and service partner for Magni telehandlers. We are an official distributor and service partner for JCB construction machinery. We are an official distributor and service partner for Mercedes-Benz. We are an official distributor and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer you the complete DMS product range! Subject to errors and prior sale. = Further information = New: Yes Intended use: Construction Empty weight: 217 kg Contact Marius Herden for more information. Nlodeyxadaepfx Ahnef

Condition: used, Three-phase motor, electric motor with 2 speeds -Power: 1.25/4.2 kW -Speed: 970/1460 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -pole changing -Dimensions: 440/350/H265 mm Nljdpfx Ahjctq Nhjnef -Weight: 62 kg

Condition: used, DC motor, servo motor, gear motor, electric motor, direct current gear motor Nodpfxechfb Nj Ahnslf -Manufacturer gearbox Sigl type: 65.1GE/SP126 -Manufacturer Motor Sigl Type: G1250 NM100 TDG 60-10 B14 -Speed: 14 rpm adjustable -Power: 1.25 kW -Construction: angle -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 660/192/H250 mm -Weight: 38 kg

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! Nodjfivg Rspfx Ahnelf 1 shelf unit with 4 stands € 4.115 (net)! Transport costs within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 6,300 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 4,000 kg per stand with 4 stands per arm level 4 x 500kg = 2,000 kg Profiles: frame: IPE220, arms: IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: used, Gearboxes, pinion gears, angular gears, transmission gears -Translation: 1: 11.21 -Drive shaft: Ø 16 x 45 mm -Output shaft: Ø 25 x 50 mm -Dimensions: 315/145/H155 mm Nljdpsfl Unuofx Ahnef -Weight: 9.7 kg

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Nodpfx Aeu Agh Sehnolf Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Year of construction: 2001, condition: good (used), Manufacturer: Zeppelin Silo- und Apparatetechnik GmbH Type: Stainless steel silo Year of manufacture: 2001 Volume: 70 m³ per silo Nedpfxozqkfpj Ahnolf Material: Stainless steel Filling material: PA/PP granules Bulk density: 0.6 kg/dm³ Silo height: 12,500 mm Silo diameter: 3,000 mm Max. operating overpressure: 45 mbar Permissible underpressure: 5 mbar Max. operating temperature: 50 °C Max. insertion depth: 11,000 mm Wall friction coefficient: 0.3–0.4 Horizontal load ratio λ: 0.5–0.7 Bottom load factor cb: 1.5 Discharge factor eh: 1.2 Bulk material coefficient βG: 0.4 μH: 0.2–0.4 Available quantity: 3 silos

Condition: new, Year of construction: 2026, CORMAK RGE30PW Electric Tapping Machine The CORMAK RGE30PW electric tapping machine is an innovative industrial tool that revolutionizes the process of thread cutting in various materials. Using the latest technologies, the RGE30PW enables fast, precise, and efficient tapping in both large production facilities and small workshops. Thanks to the servo drive and modern control system, this machine significantly accelerates the entire tapping process while ensuring exceptional reliability and high-quality threads, making it an essential tool in any production environment. Main advantages of the CORMAK RGE30PW Electric Tapping Machine High efficiency: Equipped with a powerful servo drive, the CORMAK RGE30PW provides fast and accurate tapping, significantly reducing operation time compared with traditional manual methods. Precise thread cutting: The rotating arm and easy adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth guarantee excellent thread quality while maintaining a precise 90° working angle. Wide range of applications: The tapping machine can process various materials, including steel, stainless steel, aluminium, and non-ferrous metals, making it suitable for many industrial sectors. Intuitive control panel: The machine features a modern touchscreen control panel that allows easy programming of operating parameters, with menu languages available in Polish and English. Rotating tapping arm: This function enables easy and precise thread cutting at any angle, significantly increasing flexibility in various applications. Nlsdpfsycdalox Ahnof Cooling and chip removal system: The integrated micro-spray lubrication system cools the tools, extending their service life, while the chip blow-off system effectively removes chips and improves visibility of the workpiece. Design and Technology The CORMAK RGE30PW electric tapping machine was designed with a focus on efficiency, precision, and durability. It is a robust device providing long-term, trouble-free operation even under intensive working conditions. Key components, including the tapping arm, have been engineered to ensure exceptional stability and accuracy during tapping operations. Standard Equipment of the CORMAK RGE30PW Tapping Machine Touchscreen control panel: Allows easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Enables thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long service life. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE30PW Tapping Machine Parameter Value Power 1.2 kW Power supply 230 V Weight 50 kg Maximum arm reach 1200 mm Maximum spindle speed 200 rpm Included in the set: Tap holders covering the range from M5 to M30. The machine is supplied without a workbench, vice, and taps.