Used Evotec -Airtech Sr for sale (924)

Condition: good (used), Year of construction: 1992, machine/vehicle number: 921602-3, Offer 25341 Technical specifications: - Maximum load capacity per compartment level: 2000 kg - 6 pull-out compartment shelves - 1 upper storage compartment - Compartment dimensions: approx. W 2600 x D 1350 mm - Maximum extension of the compartment shelves: approx. 100% - Distance between the compartment shelves: 240 mm Iodpfxezdrqgs Acrjth - Space required: approx. W 2950 x H 2250 x D 2480 mm - Space required in depth when extended: 2980 mm - Weight: approx. 1800 kg

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 74500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ Itodpfx Acjy Umklerjh 📌 Inspector's Comment: Machine for concrete pile drilling, soil improvement, and vibrocompaction. Carrier device Sennebogen SR25BT (manufactured in 2008) with drilling attachment Delmag RH18 (manufactured in 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Feed winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT PRESENT, PURELY A SOIL IMPROVEMENT DEVICE, drilling gearbox MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, automatic alignment. Hydraulic telescopic undercarriage with a width from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at BH 3.304. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m3/h), conveyor screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of the operating hours. At the time of inspection in 2023, the machine was running/functioning without any abnormalities. As of October 2024, storage damages have occurred to valves, control, and hydraulic hoses. It is not possible to operate the machine with 2 attachments at the same time. The machine shows wear and tear appropriate to its age, mileage, and purpose of use on pins and bushes as well as signs of use (dents, abrasions, etc.). The machine was not tested under load. The machine was used with 55 and 80 paddles. After service and maintenance of the storage damages, the device is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40844 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 Itjdpfx Acsy Dim Iorjh SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 107555 [h] - Number of working hours : 91025 [h] - Number of spindle hours : 54783 [h] EQUIPMENT - CNC : Fanuc 300is-model A - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : FMB turbo 3-26 / 3200 A

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 6 END ATTACHMENT - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1102 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 94549 [h] - Number of working hours : 76096 [h] - Number of spindle hours : 57727 [h] EQUIPMENT - CNC : Fanuc 18i- TB - Rotating guide bush - Parts catcher - Parts conveying strip Iedjy Dimzopfx Acreth - Ejection of workpiece - Coolant tank * with high-pressure pump - Bar loader : FMB TURBO2-20/3200A - Electric transformer

Condition: used, maximum load weight: 26,700 kg, overall weight: 32,500 kg, axle configuration: 2 axles, first registration: 02/2013, * Schmitz Cargobull Gotha SKI 18 SL Iodpfx Acolhp Rzoreth * Rear tipper (half-pipe) * 2-axle * VIN: WSK000001270258 * Unladen weight: 5,800 kg * Payload: 26,700 kg * Gross weight: 32,500 kg * Kingpin load: 26,700 kg * Axle load: 9,000 / 9,000 kg * Trailer length: 8,775 mm * Trailer width: 2,550 mm * Trailer height: 3,280 mm * Tyres: 385 / 65 R 22.5 * Price on request * All information subject to change, errors excepted * Internal number: 0376 Tel./WhatsApp:

Condition: ready for operation (used), Chain Hoist, Rema SR Star 090/55, 8 Meters, 3200 kg, Used Machine Manufacturer: Rema SR Model: Star 090/55 Overall Dimensions: Width: 650 mm Depth: 350 mm Itodjxxiivjpfx Acreh Height: 460 mm Electrical Data: 400V; 2.2 kW; 4.8A Load Capacity: 3200 kg Lifting Height: 8 m In the condition shown in the pictures!

Condition: good (used), axle configuration: 2 axles, first registration: 08/2001, total length: 13,730 mm, total width: 2,550 mm, suspension: air, tire size: 425/65R22.5, wheelbase: 7,940 mm, color: blue, Year of construction: 2001, Equipment: ABS, tail-lift, = Additional Options and Accessories = Itsdpfx Aezd E E Rocrjh - Tail lift = Additional Information = Axle configuration Tire size: 425/65R22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 2: Steerable; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 4,700 kg Payload: 27,300 kg GVW: 32,000 kg Functional Tail lift: D'HOLLANDIA, rear door, 2,500 kg Cooling: 20 °C to 20 °C Cooling engine: Diesel Condition Technical condition: good Visual condition: good Damage: none

Condition: used, mileage: 1 km, power: 470 kW (639.02 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2012, GVW: 68.000 kg Itodpjzcx T Tsfx Acrsh Please contact Emal Jaweed for more information

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units Iodpov Rpnmefx Acroth - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF 3-Axle Tipper Semi-Trailer SKM 36/3 SR Membrane ? Steel Half-Pipe Body (50.4 m³) New Vehicle Availability: Expected February 2026 ----Technical Specifications Type: KEMPF SKM 36/3 SR Membrane * Design: 3-axle tipper semi-trailer with steel half-pipe body * Permissible total weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Loading length: approx. 9,500 mm * Loading width: approx. 2,350 mm * Body height: approx. 2,400 mm * Body volume: approx. 50.4 m³ * Total height: approx. 3,830 mm to the top edge (loaded) * Nominal coupling height: approx. 1,200 mm (technically 1,200–1,260 mm) ----Superstructure / Body Steel half-pipe body in durable off-road design * Material: highly wear-resistant HARDOX steel (HB 450 / HB 500) * Floor: continuous 5 mm HARDOX steel, reinforced * Side walls: 4 mm HARDOX steel * Front wall: 20° inclined, 4 mm HARDOX steel * Rear wall: double-leaf (1/3 left, 2/3 right), grain-tight, with pneumatic 2-hook locking system and integrated slide (400 x 400 mm) * Cover plate: removable, protects slider from dirt and damage * Air vibrator: rear left, operated by switch * Catwalk with ladder and guardrail according to accident prevention regulations (UVV) * Internal access via step system in the front wall * Shovel and broom holder on the front wall ----Chassis and Superstructure KEMPF welded construction made of fine-grained steel, sandblasted and hot-dip galvanized Isdpfx Aexn Ebmocrjth * Off-road version, conically tapered * Chassis color: Deep Black (RAL 9005) * Body color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Attachments: hot-dip galvanized and black powder-coated * Robust and high-quality overall construction ----Axles, Tyres, and Suspension SAF INTRADISC plus Integral off-road axles with disc brakes (Ø 430 mm) * Axle with automatic lift axle and forced lowering * Tyres: 385/65 R 22.5 (brand according to Kempf's choice) * Rims: Alcoa Ultra ONE aluminum rims, Dura-Bright EVO * Air suspension system with lift/lower function and quick release * Load gauge with scale display at the front left * Chassis laser-aligned (optimized tire wear and fuel consumption) ----Hydraulics and Tipping System HYVA front tipping cylinder, single-circuit hydraulic system (190–250 bar) * Edbro 1" closure coupling, high mounted * Hard-chromed piston, robust design ----Brake and Safety Systems Knorr EBS with RSP (Roll Stability Program) * ABS with 4-channel configuration (4S/2M) and brake light connection * Tire pressure monitoring system in accordance with ECE R141 * Trailer Info Module TIM G2 with brake wear indicator and diagnostic data * Acoustic reverse warning system * Folding underrun protection to ECE R58.03 with spring-assisted lifting ----Lighting and Electrics Complete LED lighting to EC standard, ADR compliant * LED triple chamber lights with chrome rings * LED side markers with indicator function * LED cargo space lighting, operated by switch * LED reversing lights (2 additional side-mounted) * LED rear fog light and license plate lighting * Brake light * 15-pin socket ----Accessories and Extras Two PVC toolboxes (approx. 660 x 500 x 460 mm each) * Removable aluminum ladder (4 m) with holder * Two plastic wheel chocks * Double-sided side underrun protection in accordance with EC regulation * Folding A-plate at the rear of the chassis * Large reflective panel (200 x 1,130 mm) * Mud flaps with spray suppressor * Two aluminum landing legs (load capacity 24 t) ----Tarpaulin and Frame Rol

Condition: used, Year of construction: 2020, carrying capacity 500 kg weight 930 kg dimensions 1250 x 2590 x 1500 mm Operating instructions available technical data see attached PDF Itedpfjvg R U Tsx Acreh

Condition: like new (used), Year of construction: 1998, functionality: fully functional, cutting height (max.): 460 mm, cutting width (max.): 330 mm, control type: manual, actuation type: electric, total height: 1,750 mm, total length: 2,900 mm, total width: 1,100 mm, overall weight: 900 kg, Equipment: CE marking, MEBER SR 900 band saw for cutting lumber into slats! Professional band saw designed for precise cutting of wood and large-format elements. The machine has undergone technical inspection and is in very good condition – ready for operation. The machine is in perfect condition after inspection. TECHNICAL SPECIFICATIONS: - Maximum cutting height: 460 mm - Cutting height with feed: 240 mm - Maximum cutting width: 680 mm - Cutting width with feed: 130 mm - Maximum element width: 330 mm - Maximum band width: 80 mm - Table height from the base: 1000 mm - Table dimensions: 970 × 810 mm - Table adjustable at an angle: yes - Band guidance: double-sided - Feed speeds (10 ranges): 2.5 / 4 / 5 / 7 / 8 / 12 / 14 / 19 / 24 / 38 m/min Motor power: 5.5 kW Machine dimensions: Itedpoy Uc H Nofx Acrjh - Length: 2900 mm - Width: 1100 mm - Height: 1750 mm - Weight: 900 kg Robust and efficient band saw for carpentry and production applications. Thanks to its large cutting height and width, it enables the processing of massive elements. The adjustable table and wide range of feed speeds allow you to adjust the operating parameters to different types of wood and production requirements. Double-sided band guidance ensures high precision and cutting stability. Tel: 664 335 465 Tel: 530 632 386 jbsmaszyny.pl

Condition: used, maximum load weight: 28,240 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, Year of construction: 2013, Equipment: ABS, Air, lift, MB disc, EBS, aluminum rims, fall supports, lean-to ladder, PVC half-shell mudguard, UFS foldable, trough made of HB 450 floor 4mm, side walls 3.2mm thick, rear wall 1/2 + 1/2, ladder and walkway, roof frame, loading pressure gauge, 2xWZK, roll-up tarpaulin with central locking Ijdpsuwhruefx Acrsth

Condition: used, maximum load weight: 23,800 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 06/2016, loading space volume: 9 m³, Equipment: ABS, Louault SR24 9m³ Concrete Mixer Camera Steering Axle Hydraulic Drive Liebherr Reference for inquiries: 1123857 Year of manufacture: 06/2016 Volume: 9m³ Pressure vessel Liebherr mixing technology Side underrun protection Extendable access ladder on the left side Rear-view camera Tires: 1st axle: 435 / 50 R22.5, air suspension, 50% tread, steering axle 2nd axle: 435 / 50 R22.5, air suspension, 50% tread, steering axle --- Price: €9,900 + 19% VAT. Isdpsq Etrgsfx Acrsth For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish and ????? Subject to typing errors, mistakes, and prior sale.

Condition: excellent (used), working length 3300 mm working height 1800 mm 3 vertical cylinders 2 horizontal cylinders manual operating mode Itjdpfx Aey Uuwajcroh

Condition: used, Dicer Ruhle -Type: SR1 -Loading chamber dimensions: 330 x 100 x 100 mm -Dimensions: 920 x 600 x 1050mm -Efficiency: 900-1500 kg/h, 80 cuts per minute -Knives: 25x25 mm -Power: 1.5 kW -Weight: 270 kg -Supply: 400V, 50Hz 3N -Stainless steel Isdpfx Asyx Suwecrjth -Quantity in stock: 1 -Condition: Used / after technical inspection in good working condition, ready to work

Condition: used, Grinder Meissner -Type: SR 160/2 -Power: 18/25 kW -Throat diameter: 160 mm -Number of main screw speeds: 2 Itjdpfx Asxywl Uecrsh -Number of feed screw speeds: 2 (speed control via inverter) -Including loading for 200L trolleys -Dimensions with loading: 2500 x 1900 x 2720 mm -Throat made of brass -Machine made of stainless and acid-resistant steel -Power supply: 400V 50Hz 3N -Condition: used in very good condition, ready to work

Condition: good (used), Sepro robot Type: SR 4030 S3 Year: 08-2006 Iedpjnxkdnefx Acrjth

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels Itedpfx Aov Dg A Ujcrjh precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: used, Year of construction: 2008, operating hours: 5,137 h, machine/vehicle number: 71367, mast type: telescopic, color: other, GVW: 12.800 kg Lifting capacity: 227 kg Working height: 1 cm CE mark: yes Iedpswbfw Rjfx Acroth Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: used, Year of construction: 2005, Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph The Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph efficiently delivers continuous production in the bottling sector. Manufactured in 2005, this machine currently operates and, importantly, remains available for on-site inspection until March 2025. Technical Features of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine, model SR8, features 8 cavities for bottle formation. Consequently, this configuration produces 12,000 bottles of 0.5 liters per hour. For larger formats, such as bottles of 1.5 liters and 2 liters, it achieves a production speed of 9,600 bph. Moreover, the 18-81 bottle neck type guarantees compatibility with a wide range of caps and closures, making it adaptable to diverse production needs. Thus, this standard ensures precise sealing and airtight closures.. Main Components of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine integrates a preform loader, a preform elevator, and a preform orientator, which work in harmony to provide an automated and efficient feeding process. Preform loader: This component loads preforms from the storage area or initial container and transfers them seamlessly to the elevator system. Consequently, it ensures continuous feeding without manual interruptions. Preform elevator: The elevator lifts the preforms from the lower level to the machine’s operating level, ensuring a continuous flow to the orientator and minimizing downtime. Therefore, production proceeds smoothly. Itsdjvv E Hiopfx Acrsh Preform orientator: The orientator positions and aligns each preform correctly before inserting them into the blow molding cavities. Additionally, using mechanical guides or vibrations, it prevents misaligned preforms from entering the process. The integrated tipper tilts and discharges large quantities of preforms, typically stored in containers or boxes, in a controlled manner. Subsequently, the tipper feeds the preforms into the production line, maintaining a consistent flow while preventing overloads and blockages. By automating this process, the tipper reduces manual handling and significantly increases safety and productivity. The unscrambler plays a key role in separating and aligning the preforms before their insertion into the blow molding cavities. Specifically, by applying rotation and vibration, the unscrambler ensures optimal positioning, minimizing errors and machine stoppages. Hence, the combined action of the tipper and unscrambler maximizes production line efficiency and guarantees product quality. Furthermore, the machine’s rotary configuration facilitates continuous and stable production, which is ideal for high-intensity manufacturing. Its rotary technology, as a result, distributes heat evenly during the blowing process, ensuring high-quality output. Safety and Documentation The blow molding machine includes technical manuals and safety protections.

Condition: used, Year of construction: 1990, functionality: fully functional, Meber SR700 band saw Year of manufacture: 1990 Iodpfxowri I Ie Acroth Heavy, precise industrial band saw designed for professional woodworking applications. It belongs to the SR series from Meber, which is characterized by high stability, precise cutting guidance, and a robust construction. Technical data Feature Description Flywheel diameter 700 mm Max. cutting height approx. 450 mm Max. cutting width approx. 680 mm Blade length approx. 5,150 mm (depending on blade width) Blade width 10 – 50 mm Table size approx. 750 x 1,050 mm, tiltable (-10° to +45°) Motor power 4.0 kW Table height from floor approx. 900 mm Total height approx. 2,300 mm Weight approx. 700 kg Robust cast iron construction: Guarantees vibration-free and precise cutting guidance even for heavy workpieces. Large flywheels: Dynamically balanced and with rubber coating for smooth blade operation. Precise guide units: Height adjustable, often with roller or carbide guide systems. Safety devices: Emergency stop, foot brake Tilting work table: Enables angled cuts with high accuracy. Incl. 3 new saw blades

Condition: good (used), Year of construction: 2018, operating hours: 2,900 h, mast type: telescopic, fuel type: diesel, color: other, Drivetrain Drive: Track Make of engine: Deutz Weights Itjdpezbw Slefx Acrsh Empty weight: 7.680 kg Functional Lifting capacity: 250 kg Working height: 1.400 cm CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Emission level: Stage VI / Tier VI Delivery terms: EXW Max. horizontal reach: 1200 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Latest inspection: 2026-03-12 Additional information Please contact Martyn Joosse for more information

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Controls: Visual 2 (PLC, Parallel Subroutines) Additional I/Os in the robot rack: 7 inputs / 8 outputs + additional I/O card 16 inputs / 16 outputs Interface for communication with the injection molding machine: EUROMAP 12 (length 10 m) Conveyor Belt Control: YES Control cabinet: separately Documentation: YES Itsdpjy Eyzxofx Acroh Robot condition: very good Warranty: None X-axis travel: 3000 mm Y-axis travel: 700 mm Z-axis travel: 1400 mm R1 pneumatic head rotation: 0° - 90° R2 pneumatic head rotation: 0° - 180° and 0° - 90° Workpiece gripping circuits: Number of digital vacuum (level control from the robot panel): 2 (can work as pressure) Number of pressure circuits: 4 Number of digital vacuum (level control from the robot panel): 2

Condition: good (used), turning diameter over bed slide: 1,250 mm, turning length: 8,000 mm, workpiece weight (max.): 12,500 kg, DBC Turning Length: 8000mm Swing over bed Ø: 1280mm Swing over cross slide Ø:1000mm Length: 12500mm Width: 2100mm Height: 1800mm Weight: 35000kg Ijdpowwtcmofx Acroth