Used Flexible Pipe for sale (5,600)

Condition: ready for operation (used), Pipe Pump, Screw Pump, Used Machine Djdpsvgwacefx Ag Aeuu Overall dimensions: Length: 2330 mm Width: 400 mm Height: 500 mm Weight: 240 kg Electrical data: Voltage: 400V Power: 4 kW Current: 8.6A

Condition: ready for operation (used), Year of construction: 2008, A Rema wet grinding tube grinding machine is available. Motor power: 4kW, motor speed: 1450rpm, tube diameter range: 8mm-100mm, abrasive belt dimensions X/Y: 740mm/30mm. Documentation available. An on-site inspection is possible. Dedozcflpepfx Ag Aouu

Condition: used, machine/vehicle number: 37, Working range: 7.5 to 60 cm clearance, 1 m construction length Drive: 16 HP engine via three-speed gearbox Weight: approx. 3000 kg Dedsxdy R Ujpfx Ag Aouu

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Duedpfx Ashrkrpjg Aou Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support table Required space (L x W x H) 500 x 450 x 440 mm Weight 45 kg good condition

Condition: new, Year of construction: 2026, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. Dsdjt Eaw Dopfx Ag Ajuu ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Total power (kW) 4.5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm bending radius min. 10 mm bending radius max. 75 mm bending speed 35 mm/min pull up length of tube 2000 mm Dsdpswbi Hcsfx Ag Ajuu total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Djdpfx Ageyi Hrws Aeuu Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Dusdpfx Agjchuvre Aou Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: new, Year of construction: 2025, total width: 910 mm, total length: 1,600 mm, total height: 1,360 mm, type of input current: three-phase, overall weight: 360 kg, pipe diameter (max.): 140 mm, input voltage: 380 V, conveyor belt length: 2,000 mm, power: 2.4 kW (3.26 HP), rotational speed (max.): 2,800 rpm, rotational speed (min.): 1,400 rpm, We are offering this new TUGRA TT 140 pipe facing machine, manufactured in 2025. Dodpfx Aszbzvzsg Asuu Vice capacity (diameter): 40 - 140 mm Belt dimensions: 150 × 2000 mm Motor power/voltage: 2.4-3/380 kW/V Speed (dual): 1400, 2800 rpm Length: 1600 mm Width: 910 mm Height: 1360 mm Weight: 360 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, I have 66 mb in 6m sections for sale. Duedeiy A Ekepfx Ag Aeu Pipe 38mm x 5mm stainless 1.4571 Pipe can be cut to the required size Price per 1 mb. Please contact me if you have any questions

Condition: used, Year of construction: 2010, x-travel 450 mm Duodotqqqmepfx Ag Aou y-travel 400 mm z-travel 320 mm tool taper HSK 63 spindle turning speed range 0 - 10000 U/min rapid traverse 30 m/min control GE FANUC Series 16 i System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, travel paths module 3: X3 / Y3 / Z3 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø, (B-axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device

Year of construction: 2021, condition: used, functionality: fully functional, Nedo Pipe Laser TUBUS 2 TUBUS 2 — Year of manufacture 2021 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Dedpsy A E Uxjfx Ag Aouu Price EUR 1,950 plus VAT | EXW Einbeck | Delivery upon request

Condition: like new (used), functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, rotational speed (max.): 10,000 rpm, shaft diameter: 12 mm, mount diameter: 10 mm, shaft length under head: 2,000 mm, space requirement height: 3,000 mm, 5 x Pferd Mammut – Electronic Suspension Motors: In stock at Kinket SSP B.V. These suspension motors offer an excellent solution for a variety of industrial applications, such as grinding, polishing, brushing, and milling. Features of 5 x Pferd Mammut – Electronic Suspension Motors: Infinitely Variable Speed Control: The Pferd suspension motors are equipped with infinitely variable speed control, from 100 to 10,000 rpm. This allows you to select the optimal speed that suits the specific tasks and materials you are working with. This gives you complete control over your machining processes. Complete Package for Immediate Use: At Kinket SSP, we supply the used suspension motors including the necessary sliding contacts and a 12-meter-long VAHLE contact rail. Versatile: Whether you work in metalworking, woodworking, plastics processing, or other industries, these flexible shaft suspension motors offer versatility and performance that meet your requirements. Their proven track record in various applications makes them a reliable choice for a wide range of machining needs. Quality: The 5 flexible shaft machines are in excellent condition. Each machine has been carefully inspected. Summary: 5 x PFERD flexible shaft machines 5 x suspension brackets 5 x flexible shaft 12x2000mm 5 x straight handpiece 1 x 12-meter-long VAHLE contact rail These machines are fully comparable to the Suhner Rotomax suspension motors. Current new price approximately: €36,000 Djdpfx Aetvfnueg Aeuu Selling price of this well-used set: €22,000 We also have several new and used flexible shaft machines available in stock (approximately 30 units) from the brands Suhner / Biax and Pferd. If you are interested in a mobile or stationary machine, that is also possible. In addition, we also have several used and new handpieces in stock. Belt sander / angled handpiece with collet or M14, etc. Please ask us about our current inventory.

Condition: used, Flexible milling cell with 6-axis industrial robot ABB - CARAT model IRC5 / IRB 2400 M2004 Robot milling system with rotary change table and 2 workstations, robot cell Serial No. 24-51541 Year of manufacture: 2006 6-axis industrial robot ABB model IRB 2400/16 M2000 ABB IRC5 control unit with Tech-In panel HF milling spindle PERSKE model KRS 35.3-2, power: 1.2 kW, speed: 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot weight: 380 kg Table size (Table 1) with aluminum plate: 500 x 500 mm Table size (Table 2) with Pertinax plate: 600 x 600 mm Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The complete system is set up as a compact milling cell with a rotary change table - Control cabinet and robot controller cabinet are both compactly and solidly mounted on the milling cell - Motorized rotary indexing table (likely WEISS brand) with fixed indexing step: 2 stations = 180° - Rotary table, rotation angle 180°, with partition wall and two clamping surfaces for fixtures - While one side of the rotary table is being milled, the other side can be loaded with new workpieces in parallel - Front safety guard with light barrier for monitoring during 180° table rotation Space requirement: Length 500 cm x Width 190 cm x Height 252 cm Length with front safety guards: 500 cm Length without front safety guards: 400 cm Weight of milling cell approx. 4,000 kg Dsdeyaq Nuspfx Ag Aouu Very good condition The milling cell was used as a machining center for milling aluminum sheets and deep-drawn aluminum parts. Edge machining, milling cut-outs, drilling, etc. Also suitable for plastic processing or similar applications. If interested, please request a video from us.

Condition: good (used), Plastic pipe, polyamide pipe -Plastic pipe: 50 pieces -Length: 1695 mm -Outer diameter: 96 mm -Inner diameter: 76 mm -Weight: 4 kg/piece -Submission/Price: complete -Transport dimensions: 1700/1056/H600 mm Dedpfxsy S S Udj Ag Ajuu -Total weight: 200 kg

Condition: new, I-beam section - flat steel 80x20 (d1200) mm I-beam section - upend 80x25 (d2100) mm L-beam 50x50x6 (d1000) mm bar material - diameter 40 (d800) mm square material 60x60x3 (d4000) mm rectangle 80x30x3 (d6000) mm tube diameter max. 70x2 (d1600) mm tool adaptor 60 mm roll diameter 177 mm bending speed 6,4 m/min total power requirement 4 kW machine weight ab. 970 kg Overall size 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable Dusdpfx Aoyv Nwqeg Asu - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground Dedpsyv Nnisfx Ag Asuu - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm I-beam section - upend 50 x 15 mm roll diameter 157 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation Dusdpfxoyv Nk Ro Ag Aju - CE mark / Declaration of Conformity - Operating instructions in German

Condition: used, empty load weight: 7,820 kg, maximum load weight: 25,180 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 10/2008, loading space length: 8,400 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, loading space volume: 21 m³, suspension: air, tire size: 445/65 R22,5, Year of construction: 2008, Unladen weight: 7820 kg, Permissible total weight: 33000 kg, Cargo space (L W H): 8,400 mm x 2,500 mm x 1,000 mm, Tire size: 445/65 R22.5, Cargo space volume: 21 m³, 1st axle: , 2nd axle: , Air suspension. You will find an overview of all our available vehicles on our website. Do you need financing? We offer customized financing options, as well as full-service or telematics services. We will be happy to advise you personally. Dodozch Akspfx Ag Aeuu

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. Djdeyt Ifgepfx Ag Asuu This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. Duedpfx Ageym Unzj Aou The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Year of construction: 2013, condition: used, Number of machnines 4 St Control Siemens Tool changer 1 Pos Plant Consists of 4 Machines Soraluce FR 9000I Soraluce RR 9000II Soraluce FP 8000 Soraluce PM 6000 Workpiece Setup Stations Replacement Pallets Automatic Tool Supply System (WBG) Automatic Pallet System Pallet Storage Rack The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About Us Djdpfx Aoyr Skkog Asuu More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, We offer for sale a fully automatic BLM Group ADIGE EM80 band saw, suitable for precise cutting of tubes and profiles in serial production. The machine is equipped with Siemens Sinumerik CNC control and an automatic material feeder, enabling efficient and repeatable production. Technical specifications: Year of manufacture: 2015 Control: Siemens Sinumerik Power consumption: 38 kW Dodoy Uduzspfx Ag Ajuu Voltage: 380 V / 50 Hz Weight: approx. 8,500 kg Operating hours: approx. 26,400 h Cutting range: tubes Ø 10–80 mm Max. part length: 600 mm Ideal for serial production of short parts. Equipment: Automatic feeding system Complete machine guarding Multiple tool positions Set of clamping jaws (see photo) High-speed, high-performance saw suitable for serial production, offering high productivity and cutting accuracy. Testing possible by arrangement. More photos can be sent upon request.

Year of construction: 2018, condition: excellent (used), From insolvency: Model RRI 8460 serial no.18/70139708 with TENSION DEVICE SPITZNAS WITH AUTOMATIC FEED mODEL 512089940 Dsdpfx Aok T Av Rog Asuu in original case

Year of construction: 2005, condition: good (used), From insolvency: Djdpfxelczd Hj Ag Aeuu Spitznas model 512120010 year of manufacture unknown with TENSION DEVICE SPITZNAS WITH AUTOMATIC FEED mODEL 512089940 in original case