NBM 76 Non Mandrel Pipe and Tube Bending

CRONOSSTECH CRONOSS NBM 76

Condition: excellent (used), Make: HEYLIGENSTAEDT Type: NDC 710 / 1800 Control: R&D MTC3 4 Chuck 1400 mm Steady rest 3 units Ø 100-1050 Roller steady open 2 units Ø 1120 KNOLL Chip conveyor 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm DBC Turning Length: 8250mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1120mm Spindle power: 100kW Workpiece load: 16000 Length: 14000mm Width: 3500mm Height: 2900mm Gsdpfx Anjwzh A Aoxjit Weight: 32000kg

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Clear gap between frames 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Movable front arms with height adjustment Gsdpfsuf Nr Aox Anxoit Side and rear safety guards 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -

Condition: used, Year of construction: 1998, honing diameter 90 mm Gjdst Hw T Sjpfx Anxeit stroke 490 mm throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Gisdsu Uic Tspfx Anxst Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. Gjdpfxox D I A So Anxjit • High-pressure coolant (15 bar) • Auto tool length measurement x 2 units • Visiport • 19" screen • Siemens software P • Signal tower • Additional work light • RMP60 probe • Bracket for NCRT for vertical use • Table centre partition • 48-tool magazine Additional equipment • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Gsdox E Rdwspfx Anxoit Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: new, Delivery program Eifco hobbing machines Giedpfx Ansu Egdlsxst

Condition: good (used), Year of construction: 1990, 4-Axis Machining Centre Giodpofbml Nofx Anxet Table dimensions 1200 x 660 mm Travel paths X 1050 mm, Y 650 mm, Z 660 mm Max. table load 1600 kg Feed speeds 15000 mm/min. Tol magazine with 31 tool places, partly equipped with BT 50 tool holders. 4th axis (controlled) NIKKEN CNC 250, clamping chuck diameter 250 mm Dimensions in mm: about 3000 x 5000 x 2900 Weight in kg: about 13000

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control 4th axis unit Swarf auger Giedpfxstylazo Anxet Lighting Coolant system Enclosed guarding

Condition: used, Year of construction: 1995, grinding diameter 350 mm Gsdpfeyatx Sjx Anxsit grinding length 1000 mm centre height 175 mm Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem