Used Goma Finger Joint for sale (2,064)

Year of construction: 2020, condition: new, Dovetail cutter system, Huckle. Djdefhkvljpfx Anqsci

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, year of last overhaul: 2026, Hydraulic finger jointing cycle press (Keilzinkpresse), cycle press for finger joint connections with a pressing force of 10 t. Wood width 80 – 300 mm, wood thickness 18 – 100 mm. OPTIONS: With 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD; with electrical installation. Dcsdpfx Aot Sc Swsnqji

Condition: used, Price on request. Comprising: Minda grading line for stack and lamella dimensions Stack width: max. 1,200 mm Stack height: max. 1,200 mm Stack length: 2,000–5,000 mm Stack weight: max. 3 t Lamella width: 80–260 mm Lamella thickness: 23–80 mm (typically 46 mm in the rack) Cross-section: max. 80 x 260 mm = 208 cm² Dcedpfowwg Amsx Anqsi Performance of vacuum stacking with lifting column: Section I: 3 layers/min Section II: 2 layers/min Finger jointing by Grecon Destacking, planing line and cross transfer platforms by Minda

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm² Dodpev T Aqysfx Anqoci

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Dcjdpfx Anot Sc T Isqji Cycle press for finger joint connections Finger jointing press Pressing force 10 t Wood width 80 - 300 mm Wood thickness 18 - 100 mm OPTIONAL with hydraulic unit

Condition: used, Mini finger joint cutter Mini finger joint cutter head Finger joint cutter 100 different pieces in stock Finger joint cutters mini finger joint cutter finger joint milling tool milling cutter finger joint Dcedpfx Asrr Uphjnqei

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Dcjdpet Uduxsfx Anqji

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Dcedpfxsp R Iwhs Anqji Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Dcedpfx Ajzc Iv Denqoi Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), IM Very good condition. Dsdpfxjwivg So Anqoci

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 8/2017, working width: 180 mm, total height: 1,300 mm, overall weight: 800 kg, saw blade diameter: 200 mm, spindle diameter: 40 mm, input voltage: 380 V, type of input current: DC, Used Goma machine for manufacturing French herringbone flooring. An excellent tool for producing high-quality wooden flooring. It allows for the quick and precise production of flooring elements – herringbone patterns – with a choice of 3 angle types (45 degrees, 60 degrees, 90 degrees). The machine is in good working order and comes complete with 2 sets of saw blades and diamond cutters, as well as 3 types of tables with different angle settings. Year of manufacture: 2017. After installation, the machine is ready for operation. Djdpfxoza U H Dj Anqeci

Year of construction: 2019, condition: new, GOMA GS-900 Router Manufacturer GOMA Model / type of the GS-900 machine Production year 2019 Machine category Router Location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Cost of delivery Customer cover Startup Type to be agreed Description Comments Value Data Spindle speed 9000 - 18000 rpm Two-speed engine 3.2 / 2.4 kW Head rotation +/- 45 ° Vertical table travel 150 mm Table dimensions 700 x 800; (700 x 1200) mm The GS-900 router is intended for processing solid wood and wood-based materials, i.e. chipboard, MDF, etc. Characteristic: Dedofbl Epepfx Anqeci - processing of solid wood and chipboard, - milling of grooves in plates, edge profiling according to a curvilinear route or a straight line, - remote control for working with templates extended from the table, - double bearings allow you to use the full engine power, - pneumatic smooth lowering of the spindle controlled by a pedal, - spindle tilt in the range of +/- 45 degrees. Machining of very short, very long, complex curved edges or other unusual work requires the use of special equipment necessary for safety reasons. This tooling must sufficiently cover the tool and guarantee reliable material guidance to prevent kickback or kicking. The headstock is tilted sideways manually; the vertical position is determined by the removable pin. In the table, coaxially with the tool, there is a retractable pin D = 10 mm. After extending and installing the bearing, it provides guidance for the template with the workpiece. Clamps that can be purchased at Lignum can be used to attach the item. The tool is mounted directly in the spindle. Combined with reinforced bearings, this allows high feed rates. ATTENTION!!! The purchase of tools lies with the buyer. Spindle lock yes Table Length 1200 Spindle length mm 700 Number of heads piece 1 Number of engines pcs. 1 Number of pistons pcs. 1 Number of Spindles pcs. 1 Maximum Working Length mm 2500mm Maximum Working Width mm 1200 Maximum cutting height mm 150mm The machine has CE marking yes Engine power kW 3.2 / 2.4 kW Supply voltage V 380 New machine yes Spindle speed rpm 9000/18000 Security Guards yes Full Operation and Maintenance Documentation yes Extraction connection mm yes 70 mm Table working surface mm x mm 1200x800 Noise Level Db 50 db Manual adjustment yes Very Good Condition yes Machine weight kg 500 Capacity m3 / h 1800 m3 / h Machining height mm 150 mm With noise suppression housing yes Other machines in the category Routers

Year of construction: 1977, condition: good (used), swivel head, top-down adjustment of the table top, Dodsicld Tspfx Anqsci two types of speeds: 18,000 and 24,000, overall dimensions: height 1570mm, width 1170mm, length 1150mm,

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Dcodpodntc Njfx Anqei Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Condition: used, JOINT Decoiler – Used – CE Model: JDM 8.0 S Capacity: 8,000 kg Weight: 3,700 kg Year of manufacture: 2003 Dcodpfx Aox N S H Isnqoi Available quantity: 2 units

Year of construction: 1998, condition: excellent (used), used Year: 1998 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Saws in Poland Subcategory: Longitudinal saws for veneer Dcedpfod I Id Hox Anqji

Year of construction: 1992, condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Technical data: - Maximum material thickness with a tensile strength of 40 kg/mm²: approx. 3 mm - Shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch Dcedpfx Anehrm Iusqoi - Drive: 400 V / 1.1 kW - Space requirement: approx. W 550 x H 1200 x D 1200 mm - Weight: approx. 180 kg

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm work piece dimensions: Dsdsdcdwbepfx Anqeci work piece lenght 200 – 1500 mm work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm The machine is supplied with the following components: - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: used, Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA03 -Shaft: Ø 30 mm -Square: 15 x 15 mm -Measurements: see photos -Quantity: 4x universal joint available -Price per piece -Dimensions: 276/55 / H46 mm Dcjdshgkg Tspfx Anqsi -Weight: 1.5 kg / pc.

Condition: used, Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA04 -Square: 19 x 19 mm Dodshf Dzzjpfx Anqjci -Measurements: see photos -Quantity: 8x universal joint available -Price per piece -Dimensions: 360/70 / H55 mm -Weight: 3.6 kg / pc.

Condition: used, Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA10 -Shaft: Ø 36 mm -Measurements: see photos Dedpfx Ashf Dz Eenqeci -Number: 15x universal joint available -Price per piece -Dimensions: 120/62 / H56 mm -Weight: 1.1 kg / pc.

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Witzenmann, Hydra axial compensator unused -Type: ABG 01.0450.196.0 -Nominal diameter: DN 450 / Length 406 -Material: Bellows stainless steel -Bolt circle: Ø 550 / 22 mm -Number: 4x dampers available -Price: per piece -Dimensions: Ø 595 x 415 mm Dedpfoip Eq Iex Anqeci -Weight: 40 kg/piece

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp Dcodpfedp Dvtox Anqji -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Condition: good (used), Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf Dedpfsylhivjx Anqjci -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm -Weight: 3.3 kg

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint Dcjdpfxjyzfzvo Anqoi -Cardan shaft: with universal joint -Type: Length 250 mm -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Quantity: 2x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 250 mm -Weight: 2.3 kg/pc.